Commit Graph

46737 Commits

Author SHA1 Message Date
Petr Štetiar
2b28358a37 odhcpd: activate PIE ASLR by default
This activates PIE ASLR support by default when the regular option is
selected.

Size increase on x86/64:

 odhcpd-ipv6only Installed-Size: 36821 -> 38216

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-01-14 00:06:40 +01:00
Petr Štetiar
9c628cc76c procd: activate PIE ASLR by default
This activates PIE ASLR support by default when the regular option is
selected.

Size increase on x86/64:

 procd Installed-Size: 44931 -> 47362

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-01-14 00:06:35 +01:00
Petr Štetiar
d38dd6e1ef ubus: activate PIE ASLR by default
This activates PIE ASLR support by default when the regular option is
selected.

Size increase on x86/64:

 ubus  Installed-Size:  5602 ->  5950
 ubusd Installed-Size: 11643 -> 12119

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-01-14 00:06:03 +01:00
Hauke Mehrtens
a2571f3c81 uhttpd: Activate PIE by default
This activates PIE ASLR support by default when the regular option is
selected.

This increases the binary size by 39% uncompressed and 21% compressed
on MIPS BE.

old:
33,189 /usr/sbin/uhttpd
23,016 uhttpd_2019-08-17-6b03f960-4_mips_24kc.ipk

new:
46,212 /usr/sbin/uhttpd
27,979 uhttpd_2019-08-17-6b03f960-4_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
2020-01-13 15:34:36 +01:00
Hauke Mehrtens
6b2379d048 hostapd: Activate PIE by default
This activates PIE ASLR support by default when the regular option is
selected.

This increases the binary size by 26% uncompressed and 16% compressed
on MIPS BE.

old:
460,933 /usr/sbin/wpad
283,891 wpad-basic_2019-08-08-ca8c2bd2-1_mips_24kc.ipk

new:
584,508 /usr/sbin/wpad
330,281 wpad-basic_2019-08-08-ca8c2bd2-1_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
2020-01-13 15:34:36 +01:00
Hauke Mehrtens
7ab6613026 dropbear: Activate PIE by default
This activates PIE ASLR support by default when the regular option is
selected.

This increases the binary size by 18% uncompressed and 17% compressed
on MIPS BE.

old:
164,261 /usr/sbin/dropbear
 85,648 dropbear_2019.78-2_mips_24kc.ipk

new:
194,492 /usr/sbin/dropbear
100,309 dropbear_2019.78-2_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
2020-01-13 15:34:36 +01:00
Hauke Mehrtens
dae0ac7770 dnsmasq: Activate PIE by default
This activates PIE ASLR support by default when the regular option is
selected.

This increases the binary size by 37% uncompressed and 18% compressed
on MIPS BE.

old:
146,933 /usr/sbin/dnsmasq
101,837 dnsmasq_2.80-14_mips_24kc.ipk

new:
202,020 /usr/sbin/dnsmasq
120,577 dnsmasq_2.80-14_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
2020-01-13 15:34:36 +01:00
Hauke Mehrtens
19cbac7d26 buildsystem: Make PIE ASLR option tristate
This tristate choose allows to select to build only some applications
with PIE enabled. On MIPS binaries are getting about 30% bigger when PIE
is activated for the, which is a huge increase.

Network exposed applications like dnsmasq should then be build with PIE
enabled, but some applications which are normally not parsing data from
the network do not have it activated. The regular option should give a
good trade off between extra flash and RAM memory usage and security.

This changes the default from building no applications with PIE to build
some specifically marked applications with PIE enabled. This option is
only activated for targets with bigger flash and RAM to not consume
extra memory on the very small targets. On SDK builds the Regular option
should always be selected, because some tiny targets share the
applications with big targets and only the images for the tiny targets
should contain the none PIE applications, but the images for the normal
targets should use PIE. The shared packages should always use PIE when
it should be normally activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
2020-01-13 15:34:36 +01:00
Hans Dedecker
3446702cdb ethtool: bump to 5.4
7dc0af7 Release version 5.4.
914912e ethtool: add 0x16 and 0x1c extended compliance codes
600b779 ethtool: mark 10G Base-ER as SFF-8472 revision 10.4 onwards
696565d ethtool: correctly interpret bitrate of 255
2941970 fix unused parameter warning in e1000_get_mac_type()
5e814f2 fix unused parameter warning in fjes_dump_regs()
b1a5279 fix unused parameter warning in ixgb_dump_regs()
6608751 fix unused parameter warning in ibm_emac_dump_regs()
1c30119 fix unused parameter warning in et131x_dump_regs()
a56aba4 fix unused parameter warning in amd8111e_dump_regs()
f40d32d fix unused parameter warning in fec_dump_regs()
8b84f1a fix unused parameter warning in at76c50x_usb_dump_regs()
f725f5a fix unused parameter warning in smsc911x_dump_regs()
a12cd66 fix unused parameter warning in e1000_dump_regs()
e058656 fix unused parameter warning in igb_dump_regs()
debac02 fix unused parameter warning in de2104[01]_dump_regs()
d434eea fix unused parameter warning in e100_dump_regs()
8df12f3 fix unused parameter warning in vioc_dump_regs()
92d716b fix unused parameter warning in tg3_dump_{eeprom, regs}()
211c99e fix unused parameter warning in fec_8xx_dump_regs()
362fb8b fix unused parameter warning in ixgbevf_dump_regs()
87903c2 fix unused parameter warning in st_{mac100, gmac}_dump_regs()
c1eaddf fix unused parameter warning in vmxnet3_dump_regs()
313c9f8 fix unused parameter warning in dsa_dump_regs()
183e8a2 fix unused parameter warning in {skge, sky2}_dump_regs()
7f84c13 fix unused parameter warning in lan78xx_dump_regs()
02d0aaa fix unused parameter warning in realtek_dump_regs()
726d607 fix unused parameter warning in ixgbe_dump_regs()
967177c fix unused parameter warning in netsemi_dump_eeprom()
710a414 fix unused parameter warning in natsemi_dump_regs()
283398a fix unused parameter warning in print_simple_table()
0404267 fix unused parameter warning in sfc_dump_regs()
57c7298 fix unused parameter warning in altera_tse_dump_regs()
302e91a fix unused parameter warning in dump_eeprom()
2054a8c fix unused parameter warning in find_option()
d5432a9 fix unused parameter warnings in do_version() and show_usage()
c430e75 fix arithmetic on pointer to void is a GNU extension warning
e568431 ethtool: implement support for Energy Detect Power Down
e391f4c ethtool: sync ethtool-copy.h: adds support for EDPD

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-01-12 22:19:37 +01:00
David Bauer
8b86ddf4d5 netfilter: add back nft_hash
nft_hash hash falsely removed in commit 97940f8766
("kernel: remove obsolete kernel version switches").

Add the module back, as otherwise the build fails.

Fixes: 97940f8766 ("kernel: remove obsolete kernel version switches")

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-01-12 18:59:07 +01:00
Adrian Schmutzler
97940f8766 kernel: remove obsolete kernel version switches
After kernel 4.9 has been removed, this removes all (now obsolete)
kernel version switches that deal with versions before 4.14.

Package kmod-crypto-iv is empty now and thus removed entirely.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-12 16:34:20 +01:00
David Bauer
ba8faa0fea generic: update config-4.14
Builds for kenrel 4.14 targetswere failing because of
missing symbols for the B53 swconfig driver.

Fixes: 313bde53ce ("generic: update config-4.19")
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-01-12 16:27:33 +01:00
Tom Brouwer
2090b8af0a ipq40xx: add support for EZVIZ CS-W3-WD1200G EUP
Hardware:
SOC:    Qualcomm IPQ4018
RAM:	128 MB Nanya NT5CC64M16GP-DI
FLASH:  16 MB Macronix MX25L12805D
ETH:    Qualcomm QCA8075 (4 Gigabit ports, 3xLAN, 1xWAN)
WLAN:   Qualcomm IPQ4018 (2.4 & 5 Ghz)
BUTTON: Shared WPS/Reset button
LED:    RGB Status/Power LED
SERIAL: Header J8 (UART, Left side of board). Numbered from
        top to bottom:
        (1) GND, (2) TX, (3) RX, (4) VCC (White triangle
        next to it).
        3.3v, 115200, 8N1

Tested/Working:
* Ethernet
* WiFi (2.4 and 5GHz)
* Status LED
* Reset Button (See note below)

Implementation notes:
* The shared WPS/Reset button is implemented as a Reset button
* I could not find a original firmware image to reverse engineer, meaning
currently it's not possible to flash OpenWrt through the Web GUI.

Installation (Through Serial console & TFTP):
1. Set your PC to fixed IP 192.168.1.12, Netmask 255.255.255.0, and connect to
one of the LAN ports
2. Rename the initramfs image to 'C0A8010B.img' and enable a TFTP server on
your pc, to serve the image
2. Connect to the router through serial (See connection properties above)
3. Hit a key during startup, to pause startup
4. type `setenv serverip 192.168.1.12`, to set the tftp server address
5. type `tftpboot`, to load the image from the laptop through tftp
6. type `bootm` to run the loaded image from memory
6. (If you want to return to stock firmware later, create an full MTD backup,
e.g. using instructions here https://openwrt.org/docs/guide-user/installation/generic.backup#create_full_mtd_backup)
7. Transfer the 'sysupgrade' OpenWrt firmware image from PC to router, e.g.:
`scp xxx-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/upgrade.bin`
8. Run sysupgrade to permanently install OpenWrt to flash: `sysupgrade -n /tmp/upgrade.bin`

Revert to stock:
To revert to stock, you need the MTD backup from step 6 above:
1. Unpack the MTD backup archive
2. Transfer the 'firmware' partition image to the router (e.g. mtd8_firmware.backup)
3. On the router, do `mtd write mtd8_firmware.backup firmware`

Signed-off-by: Tom Brouwer <tombrouwer@outlook.com>
[removed BOARD_NAME, OpenWRT->OpenWrt, changed LED device name to board name]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-01-12 15:57:58 +01:00
Christian Lamparter
a0c0ad728c ipq40xx: fix usbport trigger on the RT-AC58U with USB 2.0 devices
This patch partially reverts
"ipq40xx: remove unnecessary usb nodes in DTS for ASUS RT-AC58U"
as the change removed the usb2 port-trigger, so the LED would no
longer light-up when a USB 2.0 was inserted into the USB port.

Fixes: d0efb1ba95 ("ipq40xx: remove unnecessary usb nodes in DTS for ASUS RT-AC58U")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-01-12 15:47:50 +01:00
Tobias Schramm
b6946542f8 ath79: add support for Ubiquiti ToughSwitch/EdgeSwitch 8XP
Flash:    8 MB
RAM:      64 MB
SoC:      AR7242
Switch:   bcm53128
USB:      1x USB 2.0
Ethernet: 8x GbE, 1x FE

The Ubiquiti ToughSwitch 8XP is a 8-port PoE Gigabit switch with a single
Fast-Ethernet management port. It supports both 24V passive PoE and 48V
802.11af/at PoE out on all eight ports.

By default the single Fast-Ethernet port labeled "MGMT" is configured as the
WAN port. Thus access to the device is only possible via the eight switch
ports.

Installation of the firware is possible either via serial + tftpboot or
the factory firmware update function via webinterface.

Serial: 3v3 115200 8n1

The serial header is located in the lower left corner of the switches PCB:

|
|
|
| o
| o RX
| o TX
| o GND
|
|
++  +-++-+  ++  ++  +
 +--+ ++ +--++--++--+

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
[fix whitespace issue]
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-01-12 14:12:50 +01:00
Tobias Schramm
313bde53ce generic: update config-4.19
config was missing some SWCONFIG_B53 options

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
2020-01-12 14:12:50 +01:00
Tobias Schramm
b16e5517b5 kernel: add kmod packages for Broadcom bcm53xxx switch support
Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
2020-01-12 14:12:50 +01:00
Tobias Schramm
7d97fdf5ef ath79: add support for Ubiquiti SW devices
SW devices are Ubiquit ToughSwitch and EdgeSwitch series devices.
Hardware-wise they are very similar to the XM device series.

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
2020-01-12 14:12:50 +01:00
Tobias Schramm
d29929be07 firmware-utils: mkfwimage: add support for Ubiquiti SW devices
This commit adds support for Ubiquiti ToughSwitch XP (and probably also
EdgeSwitch XP) devices. They are mostly based on the same hardware as
MX devices.

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
2020-01-12 14:12:50 +01:00
Tobias Schramm
8f9cd1af0f swconfig: fix Broadcom b53 support
This commit fixes a bug in the main swconfig patch where a function
needed by the b53 driver is not exported.
Additionally it adds OF support to the b53_mdio driver for devicetree-
based probing

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
2020-01-12 14:12:50 +01:00
Kevin Darbyshire-Bryant
35ba9304c6 kmod-sched-cake: bump to 20200110
Keep up with a small amount of churn in the upstream repository.
Upstream now represents the version of CAKE as found in the linux kernel
from 4.19 onwards but with some compatibility stubs to allow building on
<4.19.

After a diversion related to an experimental ECN implementation which
has now been reverted, the important and relevant changes for us are:

8a8946b sch_cake: avoid possible divide by zero in cake_enqueue()
183b320 RFC 8622 diffserv3, 4 & 8 LE PHB support
6ff4561 sch_cake: Make sure we can write the IP header before changing DSCP bits
9fba602 sch_cake: Use tc_skb_protocol for getting packet protocol

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-01-11 08:35:23 +00:00
Chuanhong Guo
b97247c2e9 ath79: gl-ar750s: reduce kernel size to 2M in image Makefile
u-boot splits nand factory firmware at 2M offset, flash the first
part as kernel into spi nor and the other part as ubi into nand
flash. With previous commit increasing kernel size to 4M, generated
factory firmware is broken because ubi is at 4M offset.

This commit reduces kernel size definition to 2M in image Makefile,
producing proper factory image. Partition size in dts is kept
unchanged so that sysupgrade to a firmware with 2M+ kernel still
works.

Fixes: b496a2294c ("ath79: GL-AR750S: provide NAND support; increase kernel to 4 MB")
Reported-by: Jeff Kletsky <git-commits@allycomm.com>
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2020-01-11 10:37:04 +08:00
Jason A. Donenfeld
7936cb94a9 wireguard-tools: bump to 1.0.20200102
* systemd: update documentation URL
* global: bump copyright

Usual house keeping.

* Makefile: DEBUG_TOOLS -> DEBUG and document
* Makefile: port static analysis check
* dns-hatchet: adjust path for new repo layout
* Makefile: rework automatic version.h mangling

These are some important-ish cleanups for downstream package maintainers that
should make packaging this a lot smoother.

* man: add documentation about removing explicit listen-port

Documentation improvement.

* wg-quick: linux: quote ifname for nft

This should fix issues with weirdly named ifnames and odd versions of nft(8).

* fuzz: find bugs in the config syntax parser
* fuzz: find bugs when parsing uapi input

These are two fuzzers that have been laying around without a repo for a while.
Perhaps somebody with enough compute power will find bugs with them.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2020-01-09 18:54:24 +01:00
Jason A. Donenfeld
62c2199bd8 wireguard: bump to 0.0.20200105
* socket: mark skbs as not on list when receiving via gro

Certain drivers will pass gro skbs to udp, at which point the udp driver
simply iterates through them and passes them off to encap_rcv, which is
where we pick up. At the moment, we're not attempting to coalesce these
into bundles, but we also don't want to wind up having cascaded lists of
skbs treated separately. The right behavior here, then, is to just mark
each incoming one as not on a list. This can be seen in practice, for
example, with Qualcomm's rmnet_perf driver. This lead to crashes on
OnePlus devices and possibly other Qualcomm 4.14 devices. But I fear
that it could lead to issues on other drivers on weird OpenWRT routers.

This commit is upstream in net-next as:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=736775d06bac60d7a353e405398b48b2bd8b1e54

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2020-01-09 18:54:24 +01:00
Maxim Anisimov
86e7353bff ramips: add support for TP-Link Archer C20 v5
TP-Link Archer C20 v5 is a router with 5-port FE switch and
non-detachable antennas. It's based on MediaTek MT7628N+MT7610EN.

Specification:
- MediaTek MT7628N/N (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 5x 10/100 Mbps Ethernet
- 3x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 7x LED (GPIO-controlled*), 2x button, power input switch

* WAN LED in this devices is a dual-color, dual-leads type which isn't
  (fully) supported by gpio-leds driver. This type of LED requires both
  GPIOs state change at the same time to select color or turn it off.
  For now, we support/use only the green part of the LED.

Create Factory image
--------------------
As all installation methods require a U-Boot to be integrated into the
Image (and we do not ship one with the image) we are not able to create
an image in the OpenWRT build-process.

Download a TP-Link image from their Website and a OpenWRT sysupgrade
image for the device and build yourself a factory image like following:

TP-Link image:             tpl.bin
OpenWRT sysupgrade image:  owrt.bin

 > dd if=tpl.bin of=boot.bin bs=131584 count=1
 > cat owrt.bin >> boot.bin

Installing via Web-UI
---------------------
Upload the boot.bin via TP-Links firmware upgrade tool in the
web-interface.

Installing via Recovery
-----------------------
Activate Web-Recovery by beginning the upgrade Process with a
Firmware-Image from TP-Link. After starting the Firmware Upgrade,
wait ~3 seconds (When update status is switching to 0%), then
disconnect the power supply from the device. Upgrade flag (which
activates Web-Recovery) is written before the OS-image is touched and
removed after write is succesfull, so this procedure should be safe.

Plug the power back in. It will come up in Recovery-Mode on 192.168.0.1.
When active, all LEDs but the WPS LED are off.
Remeber to assign yourself a static IP-address as DHCP is not active in
this mode.

The boot.bin can now be uploaded and flashed using the web-recovery.

Installing via TFTP
-------------------
Prepare an image like following (Filenames from factory image steps
apply here)

 > dd if=/dev/zero of=tp_recovery.bin bs=196608 count=1
 > dd if=tpl.bin of=tmp.bin bs=131584 count=1
 > dd if=tmp.bin of=boot.bin bs=512 skip=1
 > cat boot.bin >> tp_recovery.bin
 > cat owrt.bin >> tp_recovery.bin

Place tp_recovery.bin in root directory of TFTP server and listen on
192.168.0.66/24.

Connect router LAN ports with your computer and power up the router
while pressing the reset button. The router will download the image via
tftp and after ~1 Minute reboot into OpenWRT.

U-Boot CLI
----------
U-Boot CLI can be activated by holding down '4' on bootup.

Dual U-Boot
-----------
This is TP-Link MediaTek device with a split-uboot feature design like
a TP-Link Archer C50 v4. The first (factory-uboot) provides recovery via
TFTP and HTTP, jumping straight into the second (firmware-uboot) if no
recovery needs to be performed. The firmware-uboot unpacks and executed
the kernel.

Web-Recovery
------------
TP-Link integrated a new Web-Recovery like the one on the Archer C7v4 /
TL-WR1043v5 / Archer C50v4. Stock-firmware sets a flag in the "romfile"
partition before beginning to write and removes it afterwards. If the
router boots with this flag set, bootloader will automatically start
Web-recovery and listens on 192.168.0.1. This way, the vendor-firmware
or an OpenWRT factory image can be written.

By doing the same while performing sysupgrade, we can take advantage of
the Web-recovery in OpenWRT.

It is important to note that Web-Recovery is only based on this flag. It
can't detect e.g. a crashing kernel or other means. Once activated it
won't boot the OS before a recovery action (either via TFTP or HTTP) is
performed. This recovery-mode is indicated by an illuminated WPS-LED on
boot.

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
[adjust some node names for LEDs in DTS]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-09 17:33:57 +01:00
Maxim Anisimov
3a538db60a ramips: fix leds for TP-Link Archer C20 v4
- add "gpio" group for wan_orange led
- use tpt triggers for wifi led indication
- add wifi 5 GHz led support

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
[slight commit message adjustment]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-09 17:31:53 +01:00
Daniel Golle
6a28552120 dnsmasq: add uci-defaults script for config migration
When running sysupgrade from an existing configuration, UCI option
dhcp.@dnsmasq[0].resolvfile needs to be modified in case it has not
been changed from it's original value.
Accomplish that using a uci-defaults script.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-01-09 15:37:53 +02:00
David Bauer
8f0effc462 ramips: disable image build for HiWiFi HC5962
Image builds for the ramips-mt7621 target currently fail with:
> WARNING: Image file ./hiwifi_hc5962-kernel.bin is too big
Disable this board for now. It can still be built using the SDK.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-01-09 12:32:16 +01:00
David Bauer
ab16adf80b hostapd: disable ft_psk_generate_local for non-PSK networks
Without this commit, ft_psk_generate_local is enabled for non-PSK
networks by default. This breaks 802.11r for EAP networks.

Disable ft_psk_generate_local by default for non-PSK networks resolves
this misbehavior.

Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net>
2020-01-09 01:01:20 +01:00
Adrian Schmutzler
57a9633a2c kernel: remove support for kernel 4.9
No target uses kernel 4.9 anymore.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-08 16:45:08 +01:00
Adrian Schmutzler
28fd4ac512 ixp4xx: remove unmaintained target
This target is still on kernel 4.9, and it looks like there is no
active maintainer for this target anymore.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-08 16:45:08 +01:00
Adrian Schmutzler
89f2deb372 orion: remove unmaintained target
This target seems to have been unmaintained for quite a while, and not a
single tester for the (now outdated) kernel 4.14 patches has been found.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-08 16:45:08 +01:00
Adrian Schmutzler
4bc92c1e75 ar7: remove unmaintained target
This target seems to have been unmaintained for quite a while, and not a
single tester for the (now outdated) kernel 4.14 patches has been found.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-08 16:45:08 +01:00
Hauke Mehrtens
2a0e0dec02 orion: update kernel to version 4.14
This adds support for kernel 4.14 to the target and directly make it the
default kernel version to use.

This patch is build-tested only, but has never been device-tested. It is
only added to preserve the changes in Git history prior to removing this
target. Use it with care.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
[rebased and extended commit message, refreshed patches for 4.14.162]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-08 16:45:08 +01:00
Hauke Mehrtens
0a85fcc627 orion: refresh kernel configuration
The configuration of the generic subtarget was used as the default
configuration and then the subtarget configurations were adapted.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-01-08 16:45:08 +01:00
Hauke Mehrtens
90740f52e9 ar7: update kernel to version 4.14
This adds support for kernel 4.14 to the target and directly make it the
default kernel version to use.

This patch is build-tested only, but has never been device-tested. It is
only added to preserve the changes in Git history prior to removing this
target. Use it with care.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
[rebased and extended commit message, refreshed patches for 4.14.162]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-08 16:45:08 +01:00
Hauke Mehrtens
08ec23f8ea ar7: refresh kernel configuration
The configuration of the generic subtarget was used as the default
configuration and then the subtarget configurations were adapted.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-01-08 16:45:08 +01:00
Adrian Schmutzler
04222bc5bc ramips: add label MAC address for Xiaomi MIR3G
The device label shows the address currently assigned to the OpenWrt
LAN interface.

Current setup is:
LAN  *:b8  factory 0xe006  label
WAN  *:b7  factory 0xe000

For vendor FW bootlog we get (manually removed parts of the address):
[    7.520000] set LAN/WAN LWLLL
[    7.530000] GMAC1_MAC_ADRH -- : 0x00004031
[    7.530000] GMAC1_MAC_ADRL -- : 0x3c****b7
[    7.530000] GDMA2_MAC_ADRH -- : 0x00004031
[    7.540000] GDMA2_MAC_ADRL -- : 0x3c****b8
[    7.540000] eth1: ===> VirtualIF_open

Without further information, this does not allow verification of
the currently unexpected LAN/WAN assignment (we would expect 0xe000
to be LAN).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-08 16:27:52 +01:00
Adrian Schmutzler
df41cc7445 ath79: remove unused Build/mktplinkfw-combined
Build/mktplinkfw-combined is not used anywhere, so remove it.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-08 16:17:58 +01:00
Adrian Schmutzler
9b0e8d0aa4 treewide: move mktplinkfw to tplink-v1-image in image-commands.mk
This move the slightly different target-specific implementations of
mktplinkfw from the targets to include/image-commands.mk and renames
it to tplink-v1-image. Having a common version will increase
consistency between implementation and will complete the
tplink build command already present in the new location.

Due to the slight differences of the original implementations, this
also does some adjustments to the device build commands/variables.

This also moves rootfs_align as this is required as dependency.

Tested on:
- TL-WDR4300 v1 (ath79, factory)
- TL-WDR4900 v1 (mpc85xx, sysupgrade)
- RE210 v1 (ramips, see Tested-by)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Christoph Krapp <achterin@googlemail.com>
2020-01-08 16:15:29 +01:00
Álvaro Fernández Rojas
0c97f034c9 ipq806x: refresh kernel patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-01-08 14:33:03 +01:00
Ansuel Smith
5318a6dea3 ipq806x: add fab scaling support
Add fab scaling support and dtsi definition

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-08 14:30:43 +01:00
Ansuel Smith
0ef755b8ad ipq806x: refactor l2 freq scaling patch
Refactor l2 freq scaling patch to support voltage
scaling and add support to base cache scaling on
cpu freq scaling. Update the dtsi files with the new
definition used in the new code.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-08 14:30:43 +01:00
Ansuel Smith
411ad3727a ipq806x: reorganize nand_pins mux definition
It's wrong set the mux to bias-disable. The best way to
do this is by creating a separate group and disable the
specific pins.

By documentation, any subgroup with no bias definition
is ignored so the mux definition is useless.
Rework the definition by sremoving the mux subgroup and
set the remaining subgroup with the mux function and
drive-strength

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-08 14:30:43 +01:00
Ansuel Smith
5ba02d10ed ipq806x: opp/core: fix broken patch Handle opp voltage adjust
The opp_notifier introduced with patch 0054-Handle-OPP-voltage adjust
for some reason missed the actual registration in the opp struct,
resulting in never being registred.
This was present in kernel 4.9 patchset but dropped in the transition
 to 4.14. Reintroduce this and fix patch 0055 about L2 cache scaling.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-08 14:30:43 +01:00
Matthias Schiffer
41c19dd542
ethtool: fix PKG_CONFIG_DEPENDS
Add missing CONFIG_ prefix.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2020-01-07 20:53:31 +01:00
Matthias Schiffer
9924db5b37
iperf: fix PKG_CONFIG_DEPENDS
Fix typo in PKG_CONFIG_DEPENDS and missing CONFIG_ prefix.

Fixes: e98e046f06 ("iperf: Allow enabling multicast support")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2020-01-07 20:52:23 +01:00
Daniel Golle
2e3cf4500b dnsmasq: bump PKG_RELEASE
Previous commit should have bumped PKG_RELEASE, but git add was
forgotten... Add it now.

Fixes: cd48d8d342 ("dnsmasq: switch to /tmp/resolv.conf.d/resolv.conf.auto")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-01-07 15:44:16 +02:00
Daniel Golle
cd48d8d342 dnsmasq: switch to /tmp/resolv.conf.d/resolv.conf.auto
Mount-bind directory instead of resolv.conf.auto file in jail to
avoid problems when the file is deleted/replaced.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-01-07 15:37:22 +02:00
Daniel Golle
5e1604477a netifd: move /tmp/resolv.conf.auto to /tmp/resolv.conf.d/
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-01-07 15:36:59 +02:00