Commit Graph

16 Commits

Author SHA1 Message Date
Álvaro Fernández Rojas
67b0cd8976 CI: labeler: add bcm27xx-utils
bcm27xx-utils can only be built for bcm27xx target.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-10-31 08:52:16 +01:00
Hauke Mehrtens
c9280b85df CI: labeler: Add new targets
Some new targets were added, but we did not add them to the labeler.
Add them now.

Link: https://github.com/openwrt/openwrt/pull/16454
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-09-28 18:36:21 +02:00
Hauke Mehrtens
2d38b16cb9 CI: labeler: remove bcm63xx
Some packages are now used by other targets, move them over

Fixes: 5cd8e037b5 ("bcm63xx: drop target")
Link: https://github.com/openwrt/openwrt/pull/16454
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-09-28 18:35:17 +02:00
Goetz Goerisch
51aa9130f7 CI: update actions/labeler to v5
* Version 5 of this action updated the runtime to Node.js 20.
 All scripts are now run with Node.js 20 instead of Node.js 16
 and are affected by any breaking changes between Node.js 16 and 20.
* adapt the labeler configuration to the new format

Follow-up to  this was reverted with b870c16534
Link: https://github.com/openwrt/openwrt/pull/16451
Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16451
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-09-24 11:42:22 +02:00
Robert Marko
169a695280 octeontx: drop target
octeontx is currently stuck on kernel 5.15 since using 6.1 breaks booting,
and unfortunately nobody has stepped up to fix this issue.

Gateworks who were primary users have supported the removal.

Link: https://github.com/openwrt/openwrt/pull/15686
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-06-12 21:52:41 +02:00
Linus Walleij
f789454df1 uboot-bmips: Add U-Boot for the BMIPS target
This is needed to boot the BCM6238-based Inteno XG6846.
Currently this is restricted to the XG6846 board.

Reviewed-by: Paul Donald <newtwen+github@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-01 21:30:32 +02:00
Nick Hainke
6ca8305598 oxnas: drop target
The Upstream Linux community has discontinued support for the target.
Maintaining support for it downstream would require too much effort.
Moreover, it seems that the supported hardware is no longer deemed worthy
of it.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2024-04-24 14:12:15 +02:00
Robert Marko
166ed4f50a CI: labeler: add d1 target
Add support for 'd1' target and its specific packages in labeler.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-13 11:25:52 +02:00
Robert Marko
e247763617 ath25: drop target
ath25 has been on life support for the last couple of releases, eventually
leading to marking it as source-only in 2023.

It has been basically only touched to do a kernel bump so that we can make
the new OpenWrt release which was a challenge due to small RAM amount.

However, with the attempt of kernel 6.1 update it turns out that kernel
cannot even finish booting due to RAM constraints, so its time to let this
target go.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-07 12:15:51 +01:00
Linus Walleij
f2a8763587 uboot-bcm53xx: Add U-Boot for NorthStar BCM53xx
I recently added support for the NorthStar ARM BCM53xx SoCs
to the upstream U-Boot. This is a back port on top of the
2023.04 version already imported to OpenWrt with the 5 necessary
upstream patches.

This is needed to create a small U-Boot for the BCM53xx-based
D-Link DIR-890L and I think also the DIR-885L, so that a
recent (bigger) kernel can be loaded and executed from the
SEAMA partitions on these devices.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-08-20 18:08:13 +02:00
Robert Marko
f02f6aaa8d
ipq807x: rename target to qualcommax
Currently, ipq807x only covers Qualcomm IPQ807x SoC-s.
However, Qualcomm also has IPQ60xx and IPQ50xx SoC-s under the AX WiSoC-s
and they share a lot of stuff with IPQ807x, especially IPQ60xx so to avoid
duplicating kernel patches and everything lets make a common target with
per SoC subtargets.

Start doing that by renaming ipq807x to qualcommax so that dependencies
on ipq807x target can be updated.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-06-16 11:11:08 +02:00
Piotr Dymacz
92b8b18c26 CI: labeler: add sifiveu target
Add support for 'sifiveu' target and its specific packages in labeler.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2023-06-12 21:22:52 +02:00
Mathew McBride
3df01b1aa4
CI: change armvirt reference to armsr
The armvirt target has been renamed to armsr.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-06-10 21:30:25 +02:00
Robert Marko
d9b80ba8b8 CI: labeler: add ipq807x target
Add support for ipq807x target to the labeler.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-01-16 12:42:23 +01:00
Hauke Mehrtens
b6c7f90b17 CI: labeler: Add target label to target packages
This adds the target label also to changes in packages which are target
specific like the boot loader of a target or some drivers which are only
use on one target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-12-30 15:10:18 +01:00
Piotr Dymacz
4f42566d47 CI: include automatic Pull Request Labeler
This adds GitHub CI action which makes use of 'Labeler', allowing
automatic labeling of new PRs, based on the modified files paths.

Below labels are supported and more can be added later:
- 'target/*'
- 'target/imagebuilder'
- 'kernel'
- 'core packages'
- 'build/scripts/tools'
- 'toolchain'
- 'GitHub/CI'

For more information:
https://github.com/marketplace/actions/labeler

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2022-09-13 21:21:12 +02:00