Commit Graph

16 Commits

Author SHA1 Message Date
Linus Walleij
3b48111df9 gemini: create zImage for DIR-685
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-14 16:24:09 +02:00
Roman Yeryomin
ce93b05bf1 gemini: fix hard disk boot on D-Link devices
Since the D-Link devices boot from hard disk we need to
add the following changes to Gemini:

- Supply a bootarg in the device tree so we can boot from
  the right partition (/dev/sda4 on DNS-313)
- Disable forced command line in config so the kernel picks
  up the right bootargs from the device tree
- Enable EXT4 in the config as this is used for rootfs else
  we get nowhere, we cannot load this as a module because,
  well, it is supposed to be loaded from the root partition
  (chicken and egg problem).
- Enable jbd2 and mbcache (needed by ext4)

Also clean out the premature attempts to dynamically
modify the command line in the Image makefile: we should
pass this with the device tree bootargs instead, it works
much better.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-05-05 06:57:00 +02:00
Roman Yeryomin
2c35bcffd0 gemini: add rtl8366rb to dir-685 board
Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-05-05 06:57:00 +02:00
Roman Yeryomin
6409b159e8 gemini: switch to 4.14
This introduces Device/ infrastructure and images
for all boards available upstream.

Changes from Linus submitted version:
- fix Raidsonic image generation
- remove redundant (old) image generation
- remove redundant header tool for dns313 board

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-05-05 06:57:00 +02:00
Jonas Gorski
6f528dfbd9 treewide: do not use IMG_PREFIX in Image/Prepare
IMG_PREFIX can be modified in ImageBuilder by passing EXTRA_IMAGE_NAME
on command line, but Image/Prepare is not run in ImageBuilder. This
causes missing files when IMG_PREFIX is used for target file names in
Image/Prepare, then as source file names in Image/BuildKernel or
Image/Build.

Fix this by using a fixed output file name in Image/Prepare, and copy to
the expected file name in Image/BuildKernel instead, which is run by
ImageBuilder.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-26 12:26:25 +02:00
John Crispin
ea5b09bda3 gemini: copy kernel image to BIN_DIR
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 46351
2015-07-14 07:41:43 +00:00
John Crispin
1985e88b35 gemini: fix imagebuilder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45822
2015-05-29 11:28:33 +00:00
Jo-Philipp Wich
e814e946a6 gemini: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45782
2015-05-27 15:18:36 +00:00
Felix Fietkau
65708f749a gemini: make dd commands more portable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45039
2015-03-26 20:37:19 +00:00
John Crispin
da5001475c gemini: add basic nas4220 board support
Few notes:
- redboot partitions are unusable
- redboot declares only 16M of RAM, hence the mem arg in cmdline and separate kernel config
- boots fine but only ethernet works for now
- split wiliboard and raidsonic boards into different subtargets

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43319
2014-11-19 14:09:10 +00:00
Florian Fainelli
6a4f2922f6 targets: prepare for supporting normal and initramfs images
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
Felix Fietkau
54e9e802c4 gemini: add support for wiligear wbd-222 (patch by Darius Augulis)
SVN-Revision: 20949
2010-04-16 21:03:36 +00:00
Nicolas Thill
e2b57ecf5f define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
SVN-Revision: 20834
2010-04-12 23:15:56 +00:00
Imre Kaloz
bc8ed5ec5f generate squashfs images
SVN-Revision: 16268
2009-06-01 18:08:39 +00:00
Imre Kaloz
92353181b5 workaround a bootloader bug on the WBD111
SVN-Revision: 15818
2009-05-13 10:59:59 +00:00
Imre Kaloz
f24a7c7a68 add preliminary support for the successor of the storm port
SVN-Revision: 15772
2009-05-11 18:27:33 +00:00