Commit Graph

2671 Commits

Author SHA1 Message Date
Jonas Gorski
f11d90a76b Revert "build: remove harmful -nopad option from mksquashfs"
This reverts commit 1c0290c5cc.

Dropping the nopad can make the padding overflow into the next erase
block on devices using a non-aligned rootfs start. This breaks the jffs2
overlay partition with the following messages:

[   30.343877] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
[   30.376512] jffs2: Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
[   30.385253] jffs2: empty_blocks 196, bad_blocks 0, c->nr_blocks 197

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2019-09-07 14:45:32 +02:00
Jo-Philipp Wich
fe43969336 include: kernel-build: pass pkg-config overrides to kernel build
Pass suitable pkg-config overrides to the kernel build process in
order to let our pkg-config wrapper discover libraries provided
by tools/.

This mainly affects the use of libelf which is required for the
CONFIG_STACK_VALIDATION features. So far, the build system either
silently used host system libraries or kbuild simply disabled the
feature due to the lack of a suitable libelf.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-03 10:44:21 +02:00
Christian Lamparter
1c0290c5cc build: remove harmful -nopad option from mksquashfs
While the -nopad option prevents mksquashfs from padding the
image to an arbitrary 4k. It does not take into consideration
that squashfs is programmed to have this 4k padding when it's
being used on on a block device... which is its main "use-case".

Now, after a week long discussion on the ML that included a
back-and-forth between some of the possible options.
But this is likely the best KISS patch to deal with the issue
right away given the limited resources.

From squashfs code point of view, be warned. The 4k padding is
not enough when dealing with devices that have a PAGE_SIZE
bigger than 4k.

if it turns out to be affecting you, then please look-up either:
"FS#2460 - kernel panic reading squashfs from ubi volume" bug
Or the discussion on the OpenWrt-Devel ML in
"amp821xx: use newly added pad-squashfs for Meraki MR24" and
"Squashfs breakage lottery with UBI..."
before making an educated guess.

Note: This will not affect the "tiny"/small flash devices as
much as it seems at first. This is because the the rootfs_data
partition that follows uses jffs2. And it requires to be aligned
to the flash block-size in order to work at all.

So either the involved FSes will meet in the middle as before,
or not at all. But in that latter case the image was already
hoping for the "undefined behaviour" gamble to turn out in its
favour and this is probably why this was unnoticed for so long.

Fixes: FS#2460
Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-08-30 20:45:40 +02:00
Koen Vandeputte
db97cb814c kernel: bump 4.19 to 4.19.69
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-30 16:45:54 +02:00
Koen Vandeputte
071209ed22 kernel: bump 4.14 to 4.14.141
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-30 16:45:54 +02:00
Koen Vandeputte
1bc31e0339 kernel: bump 4.19 to 4.19.68
Refreshed all patches.

Remove upstreamed:
- 950-0307-Revert-pwm-Set-class-for-exported-channels-in-sysfs.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-28 13:08:20 +02:00
Koen Vandeputte
b5407887bc kernel: bump 4.14 to 4.14.140
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-28 13:08:20 +02:00
Koen Vandeputte
b32c77004c kernel: bump 4.9 to 4.9.190
Refreshed all patches.

Fixes:
- CVE-2019-3900

Compile-tested on: none
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-28 13:08:20 +02:00
Koen Vandeputte
491eaa898b kernel: bump 4.19 to 4.19.67
Refreshed all patches.

Also add a missing symbol for x86 which got used now in this bump.
- ISCSI_IBFT

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-27 10:32:44 +02:00
Koen Vandeputte
5f013de786 kernel: bump 4.14 to 4.14.139
Refreshed all patches.

Also add a missing symbol for x86 which got used now in this bump.
- ISCSI_IBFT

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-27 10:32:44 +02:00
Paul Spooren
58aab73797 image.mk: keep underscores when sanitize PROFILE
Underscores don't harm in filenames, however the sanitize function from
version.mk replaces them, causing inconsistent filenames.

A fix tried to solve this previously via
dfe99645db however I did not look close
enough:

openwrt-ath79-generic-8dev-carambola2.manifest # current
openwrt-ath79-generic_8dev-carambola2.manifest # patched
---------------------^

Eventually the sanitization of PROFILES *could* be removed as more and
more profiles follow the device tree approach of vendor_model, neither
containing upper case letters nor spaces.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-08-22 12:57:34 +02:00
Paul Spooren
4ee3cf2b5a build: introduce ALT vendor/model/variant
Some devices are produced and sold under different names. To debloat
the buildroot but keeping it complete, new variables are introduced to
handle different namings. Below an example taken from a recent PR[0]

    DEVICE_VENDOR := Arcadyan
    DEVICE_MODEL := ARV4520PW
    DEVICE_ALT0_VENDOR := Vodafone
    DEVICE_ALT0_MODEL := Easybox 800
    DEVICE_ALT1_VENDOR := Airties
    DEVICE_ALT1_MODEL := WAV-281

With this commit the buildroot is extended to take care of up to three
alternative namings. The primary title plus alternatives names (if
defined) are shown in the `make menuconfig` dialog. Selecting on of
devices automatically selects all alternative names as they share the
same profile.

A list of the newly introduced variables:

    DEVICE_ALT0_VENDOR :=
    DEVICE_ALT0_MODEL :=
    DEVICE_ALT0_VARIANT :=
    DEVICE_ALT1_VENDOR :=
    DEVICE_ALT1_MODEL :=
    DEVICE_ALT1_VARIANT :=
    DEVICE_ALT2_VENDOR :=
    DEVICE_ALT2_MODEL :=
    DEVICE_ALT2_VARIANT :=

[0]: https://github.com/openwrt/openwrt/pull/2229/files#diff-b436f01932a18876c27800ba183d95f6R140

Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-08-22 12:50:41 +02:00
Luis Araneda
b39ded4ab7 u-boot.mk: use openwrt url instead of lede project
The LEDE URL is automatically redirected to the OpenWRT one,
returning an HTTP 301 code (Moved Permanently).

Also, use https, as indicated by the redirect.

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-08-18 15:14:13 +00:00
Adrian Schmutzler
7e5a0da642 build: fix indent in image-commands.mk
Convert leading spaces to tab to match rest of the file.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-08-17 16:43:22 +02:00
Koen Vandeputte
c9dc0e1bdf kernel: bump 4.19 to 4.19.66
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-14 18:23:08 +02:00
Koen Vandeputte
873a8c5078 kernel: bump 4.14 to 4.14.138
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-14 18:23:08 +02:00
Koen Vandeputte
c141508525 kernel: bump 4.9 to 4.9.189
Refreshed all patches.

Compile-tested on: none
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-14 18:23:08 +02:00
Jonas Gorski
7546be6007 build: allow overriding default selection state for devices
Allow overriding the default selection state for Devices, similar to
setting a default for packages.

E.g. by setting DEFAULT to n, they won't be selected by default anymore
when enabling all device in the multi device profile.

This allows preventing images being built by the default config for
known broken devices, devices without enough RAM/flash, or devices not
working with a certain kernel versions.

This does not prevent the devices from being manually selected or images
being built by the ImageBuilder. These devices often still have worth
with a reduced package-set, or as a device for regression testing, when
no better device is available.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2019-08-13 22:13:18 +02:00
Paul Spooren
dfe99645db image.mk: remove device_ from manifest filename
The manifest file is based on IMG_PREFIX and PROFILE_SANITIZED, whereas
the latter takes a string like DEVICE_8dev_carambola2 and sanitizes it.
This behaviour results in a useless "device_" profile-prefix in the
device manifest filename. Now uses *subst* to remove that.

Therefore this patch results more consistent device file names:

openwrt-ath79-generic-8dev_carambola2-initramfs-kernel.bin
openwrt-ath79-generic-8dev-carambola2.manifest
openwrt-ath79-generic-8dev_carambola2-squashfs-sysupgrade.bin

instead of a single file being called

openwrt-ath79-generic-device_8dev-carambola2.manifest

Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-08-13 10:40:36 +02:00
Felix Fietkau
7ec092e641 Revert faulty tree push
Revert "mac80211: add new minstrel_ht patches to improve probing on mt76x2" (9861050b85)
Revert "kernel: use bulk free in kfree_skb_list to improve performance" (98b654de2e)
Revert "ramips: add preliminary support for WIO ONE" (085141dc5b)
Revert "ramips: add preliminary support for SGE AP-MTKH7-0006 developer board" (b1db6d0539)
Revert "build: use config.site generated by autoconf-lean, drop hardcoded sitefiles" (363ce4329d)
Revert "toolchain: add autoconf-lean" (fdb30eed03)
Revert "build: allow overriding the filename on the remote server when downloading" (6fa0e07758)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-08-12 12:27:06 +02:00
Felix Fietkau
363ce4329d build: use config.site generated by autoconf-lean, drop hardcoded sitefiles
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-08-12 11:43:39 +02:00
Felix Fietkau
6fa0e07758 build: allow overriding the filename on the remote server when downloading
Github releases usually don't contain the project name in the release
filename, which makes them very inconvenient to use from the build
system. Add support for naming the local file differently.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-08-12 11:43:38 +02:00
Koen Vandeputte
697658e220 kernel: bump 4.19 to 4.19.65
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-09 18:30:33 +02:00
Koen Vandeputte
f5acf56483 kernel: bump 4.14 to 4.14.137
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-09 18:30:29 +02:00
Koen Vandeputte
6e4d590990 kernel: bump 4.9 to 4.9.188
Refreshed all patches.

Compile-tested on: none
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-09 18:30:26 +02:00
Koen Vandeputte
42d9bccadb kernel: bump 4.19 to 4.19.64
Refreshed all patches.

Remove upstreamed:
- 100-powerpc-4xx-uic-clear-pending-interrupt-after-irq-ty.patch
- 950-0309-usb-dwc2-Disable-all-EP-s-on-disconnect.patch
- 950-0310-usb-dwc2-Fix-disable-all-EP-s-on-disconnect.patch

Fixes:
- CVE-2019-13648
- CVE-2019-3900
- CVE-2019-10207

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-06 11:52:47 +02:00
Koen Vandeputte
96f1d4b02b kernel: bump 4.14 to 4.14.136
Refreshed all patches.

Altered patches:
- 306-v4.16-netfilter-remove-saveroute-indirection-in-struct-nf_.patch

Remove upstreamed:
- 100-powerpc-4xx-uic-clear-pending-interrupt-after-irq-ty.patch
- 088-0002-i2c-qup-fixed-releasing-dma-without-flush-operation.patch
- 500-arm64-dts-marvell-Fix-A37xx-UART0-register-size.patch

Fixes:
- CVE-2019-13648
- CVE-2019-10207

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-06 11:52:47 +02:00
Koen Vandeputte
a4d366005d kernel: bump 4.9 to 4.9.187
Refreshed all patches.

Altered patches:
- 021-bridge-multicast-to-unicast.patch

Compile-tested on: none
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-06 11:52:47 +02:00
Jeffery To
e545fac8d9 build: include BUILD_VARIANT in PKG_BUILD_DIR
This changes the default PKG_BUILD_DIR to take BUILD_VARIANT into
account (if set), so that packages do not need to manually override
PKG_BUILD_DIR just to handle variants.

This also updates most base packages with variants to use the updated
default PKG_BUILD_DIR.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>
2019-08-05 23:22:26 +02:00
Koen Vandeputte
c7634180fc kernel: bump 4.19 to 4.19.62
Refreshed all patches.

Remove upstreamed:
- 023-0013-crypto-crypto4xx-fix-AES-CTR-blocksize-value.patch
- 023-0014-crypto-crypto4xx-fix-blocksize-for-cfb-and-ofb.patch
- 023-0015-crypto-crypto4xx-block-ciphers-should-only-accept-co.patch
- 950-0252-staging-bcm2835_camera-Ensure-all-buffers-are-return.patch
- 950-0253-staging-bcm2835-camera-Remove-check-of-the-number-of.patch
- 950-0254-staging-bcm2835-camera-Handle-empty-EOS-buffers-whil.patch
- 950-0489-staging-mmal-vchiq-Replace-spinlock-protecting-conte.patch
- 0021-ARM-dts-gemini-Fix-up-DNS-313-compatible-string.patch
- 049-v4.20-mips-remove-superfluous-check-for-linux.patch
- 100-MIPS-fix-build-on-non-linux-hosts.patch
- 303-MIPS-Fix-bounds-check-virt_addr_valid.patch
- 0002-usb-dwc2-use-a-longer-AHB-idle-timeout-in-dwc2_core_.patch

Altered patches:
- 950-0267-staging-vc04_services-Split-vchiq-mmal-into-a-module.patch
- 700-net-add-qualcomm-mdio-and-phy.patch

Fixes:
- CVE-2019-3846

New symbol:
- AX88796B_PHY

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-31 16:51:46 +02:00
Koen Vandeputte
1d45ed1477 kernel: bump 4.14 to 4.14.134
Refreshed all patches.

Remove upstreamed:
- 049-v4.20-mips-remove-superfluous-check-for-linux.patch
- 303-MIPS-Fix-bounds-check-virt_addr_valid.patch

Fixes:
- CVE-2019-3846
- CVE-2019-3900

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-31 16:51:46 +02:00
Koen Vandeputte
7228904092 kernel: bump 4.9 to 4.9.186
Refreshed all patches.

Fixes:
- CVE-2019-3846

Compile-tested on: none
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-31 16:51:46 +02:00
Petr Štetiar
5cf897779e autotools.mk: autoreconf: fix missing install-sh
I'm trying to create a package for libgpiod, which uses
AC_CONFIG_AUX_DIR macro, which is probably leading to the following
configure error:

 autoreconf: running: /openwrt.git/staging_dir/host/bin/libtoolize --force
 OpenWrt-libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `autostuff'.
 OpenWrt-libtoolize: linking file `autostuff/ltmain.sh'
 OpenWrt-libtoolize: putting macros in `m4'.
 ...
 configure: error: cannot find install-sh, install.sh, or shtool in autostuff "."/autostuff

>From the build output it's clear, that libtoolize isn't installing
install-sh symlink, because libtoolize would install install-sh only if
it's being run with --install parameter. Corresponding part in
libtoolize:

 if $opt_install; then
   func_config_update config.guess \
     "$pkgdatadir/config" "$auxdir" pkgconfig_header
   func_config_update config.sub \
     "$pkgdatadir/config" "$auxdir" pkgconfig_header
   func_install_update install-sh \
     "$pkgdatadir/config" "$auxdir" pkgconfig_header
 fi
 func_ltmain_update ltmain.sh \
    "$pkgdatadir/config" "$auxdir" pkgconfig_header

Adding --install parameter to libtoolize fixes this build issue:

 autoreconf: running: /openwrt.git/staging_dir/host/bin/libtoolize --install --force
 OpenWrt-libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `autostuff'.
 OpenWrt-libtoolize: linking file `autostuff/config.guess'
 OpenWrt-libtoolize: linking file `autostuff/config.sub'
 OpenWrt-libtoolize: linking file `autostuff/install-sh'
 OpenWrt-libtoolize: linking file `autostuff/ltmain.sh'
 OpenWrt-libtoolize: putting macros in `m4'.

Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
Petr Štetiar
3b68fb57c9 build: cleanup possibly dangling Python 2 host symlink
When bumping buildroot to Python 3, we need to assure, that Python
symlink in staging bin directory points to Python >= 3.5 as well.

We can't rely completly just on SetupHostCommand as its executed only in
cases when the $(STAGING_DIR_HOST)/bin/python doesn't already exist, so
we need to remove it before running SetupHostCommand.

Acked-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
Petr Štetiar
19938c8de7 build: switch to Python 3
This patch switches Python used in buildroot to Python 3 as Python 2.x
series is going to be EOL relatively soon[1].

 "Being the last of the Python 2.x series, 2.7 will have an extended
  period of maintenance. Specifically, 2.7 will receive bugfix support
  until January 1, 2020. After the last release, 2.7 will receive no
  support."

It seems like Python 3 is going to be needed in order to support Meson
build system which has gained some traction recently.

Build tested on following targets:

 ath79/generic
 imx6/generic
 ipq40xx/generic
 lantiq/xway
 layerscape/armv7 (broken)
 layerscape/armv8_32b (broken)
 layerscape/armv8_64b (broken)
 mvebu/cortexa72
 ramips/mt7621
 ramips/mt7620
 sunxi/cortexa7
 x86/64

Layerscape targets are unfortunately left broken as their ls-rcw
firmware package uses Python 2 and converting it to Python 3 would take
more then reasoanble amount of time (I've tried to fix it already) and
would be better fixed by someone who can even run test it.

Run tested on ath79 (Archer C7 v5), ipq40xx (nbg6617) and x86_64 (QEMU
and apu2).

1. https://www.python.org/dev/peps/pep-0373/

Ref: PR#1937
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Cc: Mathew McBride <matt@traverse.com.au>
Acked-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
John Crispin
9e57b62783 include/package.mk: Add support for src-checkout/ folder
This feature is similar to the SRC_TREE_OVERRIDE. However instead of having
to manually create a symlink inside the package folder, the buildsystem
will check if $(TOP_DIR)/src-checkout/$(PKG_NAME)/.git is present and use
this instead.

Signed-off-by: John Crispin <john@phrozen.org>
2019-07-10 14:00:19 +02:00
Koen Vandeputte
fa2435903f kernel: bump 4.19 to 4.19.57
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-09 17:03:18 +02:00
Koen Vandeputte
0051fff171 kernel: bump 4.14 to 4.14.132
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-09 17:03:10 +02:00
Paul Spooren
8c3dbaf8b4 ath79: split DEVICE_TITLE in multiple variables
This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and
DEVICE_VARIANT. All three are merged together to look the same as the
current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as
a *fallback* for devices which weren't upgraded yet.

This is based on the work of @sudhanshu16.

The motivation is to create JSON files based on provided metadata,
needing clear differentiation between vendor, model and revision.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-07-04 15:50:17 +02:00
Felix Fietkau
c3e31b6a9b build: skip kernel stack validation when building on macOS
Since we switched to 4.19, the kernel build checks for libelf to decide if
it should build tools for stack validation.

On macOS, this check fails during target/compile, but succeeds during package
build (because of the pkg-config path picking up target libraries).

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-07-03 14:07:59 +02:00
Petr Štetiar
ef5b7aa6c3 build: image: make image padding OS agnostic
Image padding with dd needs to be done in an OS independent way as not
all dd understand capital letter unit specifiers, and not all understand
lowercase either.

Fixes: 97833a57ef ("build: image: add pad-to and pad-rootfs-squashfs helpers")
Reported-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-27 17:15:37 +02:00
Koen Vandeputte
0d71c7a57c kernel: bump 4.14 to 4.14.131
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-27 14:16:32 +02:00
Koen Vandeputte
8b74cc45be kernel: bump 4.9 to 4.9.184
Refreshed all patches.

Compile-tested on: none
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-27 14:16:32 +02:00
Koen Vandeputte
577174cf60 kernel: bump 4.19 to 4.19.56
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-25 16:46:01 +02:00
Koen Vandeputte
e4eec3bfd8 kernel: bump 4.14 to 4.14.130
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-25 16:46:01 +02:00
Petr Štetiar
62105e5c9a build: image: add IMG_ROOTFS and IMG_COMBINED variables
Adding those two variables in order to share them across the tree.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-25 14:12:22 +00:00
Petr Štetiar
83d9fb0a99 build: image: add variable for gzip-ext4-padded-squashfs
This common code could be shared by at least 3 targets (malta, armvirt
and x86) so let's factor it out to separate variable.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-25 14:12:22 +00:00
Petr Štetiar
97833a57ef build: image: add pad-to and pad-rootfs-squashfs helpers
For better reusability.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-25 14:12:22 +00:00
Jonas Gorski
5ede3fcdf7 build: warn when packages have no associated install section
Declaring a package without the appropriate install section is an easy
mistake to make, especially when renaming packages. Since this is also
easy to detect, warn about it when it happens.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
No-objections-at-all-by: Jo-Philipp Wich <jo@mein.io>
2019-06-25 14:42:07 +02:00
Koen Vandeputte
92b8fe0e0e kernel: bump 4.19 to 4.19.55
Refreshed all patches.

Compile-tested on: imx6
Runtime-tested on: imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-24 16:36:30 +02:00