Commit Graph

607 Commits

Author SHA1 Message Date
Hauke Mehrtens
93b50ade93 kernel/4.1: update to version 4.1.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48223
2016-01-12 20:51:34 +00:00
John Crispin
8c80e915a0 lantiq: Add the xbar to vr9.dts
linux 4.4 (since commit 08b3c894e56580b8ed3e601212a25bda974c3cc2
"MIPS: lantiq: Disable xbar fpi burst mode") requires that the xbar is
defined in the .dts of vrx200 (VR9) SoCs.

SVN-Revision: 48056
2016-01-01 21:21:00 +00:00
John Crispin
6f95d749d6 lantiq: match default xdsl mode and default wan interface
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48047
2016-01-01 21:19:32 +00:00
John Crispin
a9896bf106 lantiq: convert vendorid into human readable form
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48046
2016-01-01 21:19:27 +00:00
John Crispin
436fdee272 lantiq: add the current profile to the stats output
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48045
2016-01-01 21:19:21 +00:00
John Crispin
28a700de9b lantiq: TDW8980 - use devicename:colour:function led naming scheme
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48044
2016-01-01 21:19:12 +00:00
John Crispin
c584aed6b1 lantiq: P2812HNUFX - move usb leds to P2812HNU-F1
The P2812HNU-F3 doesn't have usb leds. Only the P2812HNU-F1 has those
leds.

Reported-by: Sylwester Petela <sscapi@gmail.com>
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48043
2016-01-01 21:18:59 +00:00
John Crispin
3cbfc74cde lantiq: use devicename:colour:function led naming scheme
The leds of the following boards are not renamed due to lack of
manuals/informations:

- ARV7519PW
- ARV7510PW22
- ARV4510PW

The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't
match the leds from the manual or pictures (e.g. there shouldn't be a wps led).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48042
2016-01-01 21:18:54 +00:00
John Crispin
4cf3fd49fc lantiq: add support for indicating the boot state using three leds
The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to
indicate the current boot state. This patch adds support for such cases.

The existing led sequences should be the same as before.

Boards which are using a led different from power (like TDW89x0) are
changed to switch of the led after boot

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48041
2016-01-01 21:18:47 +00:00
John Crispin
ebc71a4d16 lantiq: use dsl led defined in DTS
dsl_control (dsl_notify.sh) is the only process which is aware of the
state of the atm/ptm interface. Use the dsl led exclusive for the dsl
line state.

On boards which don't have a distinct internet and a dsl led, let the
netdev status of the atm interface trigger the shared led.

Triggering the shared led according to the status of the ppp interface
isn't suitable, since the led would be switched of if the ppp
connection goes down, but the line is still in sync.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48040
2016-01-01 21:18:38 +00:00
John Crispin
a3c3b2a9a8 lantiq: use power leds defined in DTS
Use the power leds defined in the dts file instead of hardcoded led names.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48039
2016-01-01 21:18:30 +00:00
John Crispin
d7a5d66ea1 lantiq: use default leds defined in DTS
Remove all now double defined leds from the led board file. Use pppoe
as default for all broadband connections, since it's the default in
OpenWrt now.

Rename the the wifi leds to make sure, the not applicable default
values get overwritten.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48038
2016-01-01 21:18:21 +00:00
John Crispin
a3042500ab lantiq: define default leds in dts files
- ARV7525PW: use the power led as dsl led as done by the stock firmware
- FRITZ3370: use the info led as internet led
- FRITZ7320: use the power led as dsl led as done by the stock firmware

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48037
2016-01-01 21:18:08 +00:00
John Crispin
5b6f0250f6 lantiq: ARV752DPW - fix dts file
Use the same led logic and labels as the OEM firmware (red = okay,
blue = failure).

Add the red internet led.

Remove missing usb led workaround. The workaround shouldn't be in the
default configuration.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48036
2016-01-01 21:18:00 +00:00
John Crispin
aa99acdb46 lantiq: ARV752DPW22 - fix dts file
No need to switch (and keep) on all leds at boot. Use the same led
logic and labels as the OEM firmware (red = okay, blue = failure).

Add the red internet led.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48035
2016-01-01 21:17:55 +00:00
John Crispin
2eead1c891 lantiq: DGN1000B - fix typo in dts file
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48034
2016-01-01 21:17:50 +00:00
John Crispin
e557011041 lantiq: ARV4518PWR01* move redundant parts to dtsi
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48033
2016-01-01 21:17:42 +00:00
John Crispin
b6b128f63d lantiq: BTHOMEHUBV2B - remove missing usb led workaround
The workaround shouldn't be in the default configuration.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48032
2016-01-01 21:17:34 +00:00
John Crispin
56fa6d8241 lantiq: P2812HNUFX - move leds to dtsi
Beside the used labels, they are the same on both boards.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48031
2016-01-01 21:17:26 +00:00
John Crispin
8d5ac2d0f1 lantiq: fix Image Builder
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48002
2015-12-23 19:25:55 +00:00
John Crispin
c01ca020ea lantiq: fix PCI_DEVICE_ID_LANTIQ_PCIE
It's not necessary to define PCI_* if pci_ids.h is included a few
lines above.

The change to pci_ids.h doesn't look intentional to me, especially
since the former value is added to the top of ifxmips_fixup_pcie.c.

Both changes were introduced with the kernel 4.1 support patches and
were not present in the 3.18 patches.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47996
2015-12-23 18:25:22 +00:00
John Crispin
e33aa71045 lantiq: TDW89x0 - increase spi frequency
Use the same max spi frequency as set in u-boot.

According to the datasheets, the Q64-104HIP as well as the Winbond
25Q64FVSIG support spi frequencies up to 50 MHz. During my tests, the
Q64-104HIP couldn't be recognized/initialized if the frequency
was > 40MHz.

Both chips do support fast read as well.

While touching the dts file, I fixed the dtc compiler warnings.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47994
2015-12-23 18:24:56 +00:00
John Crispin
3af2cf661b lantiq: disable SW_PORTMAP usage in the ethernet driver
using the special tag in this way lead to port mirroring for certain types of traffic.
fallback to using th PMAC_EWAN register for the wan portmap.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47993
2015-12-23 18:24:43 +00:00
John Crispin
5e10f67b67 lantiq: Configure LED polarity for TDW8970 and TDW8980.
This patch configures the correct ath9k WLAN LED polarity for the TDW8970,
and for the TDW8980 as well.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 47969
2015-12-23 14:42:25 +00:00
John Crispin
21493c984a lantiq: fix ARV7519RW22 buttons
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47918
2015-12-17 09:28:29 +00:00
John Crispin
0a6a37be83 lantiq: add the TDW8980 5GHz led
Still unused, but u-boot doesn't take care of the led, which results in a
permanent switched on 5GHz LED.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47915
2015-12-17 09:28:01 +00:00
John Crispin
ab77d4bcb9 lantiq: Fix LED handling.
- Use common OpenWrt blink patterns instead of custom ones
- Add preinit_regular hook
- Handle the TDW89X0 that does not have a configurable power LED

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 47914
2015-12-17 09:27:52 +00:00
John Crispin
34934609f9 lantiq: Configure LED polarity for TDW8970.
This patch configures the correct ath9k WLAN LED polarity for the TDW8970.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 47913
2015-12-17 09:27:46 +00:00
John Crispin
ec21c9821c lantiq: Configure disabled WLAN bands for TDW89X0.
The TDW8970 has a AR9381, which is the bgn 3x3:3 variant of the AR938x family.

The TDW8980 has a AR9287, which is the bgn 2x2:2 variant of the AR928x family.

This means that the chip for both routers is 2.4 GHz only.

Anyway, the manufacturer didn't disable the 5 GHz band in the EEPROM partition
(at least on my TDW8970).

So this patch disables the 5 GHz band.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 47912
2015-12-17 09:27:40 +00:00
John Crispin
f2fd516d72 lantiq: Allow configuration of ath9k disabled bands and LED polarity from the device tree.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 47911
2015-12-17 09:27:31 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
John Crispin
0938233fcd lantiq: get rid of ltq-vdsl-fw
Because of dsl-vrx200-firmware-xdsl-* there's no need anymore to
download a dsl firmware at runtime.

Signed-off-by: Andre Heider <a.heider@gmail.com>

SVN-Revision: 47851
2015-12-11 15:05:40 +00:00
John Crispin
787120e3a3 lantiq: fix led setup after switch to uci-defaults-new.sh
The switch to uci-defaults-new.sh revealed a bug in the former used
uci-defaults.sh, which failed to add leds with colons in the led name.

This bug isn't any longer present in uci-defaults-new.sh and therefore
all via DT defined leds will be added to /etc/config/system with their initial
on/off state, regardless whether they are already added by the board specific
led mappings.

This results for a BTHOMEHUBV5A into the following led configuration:

- soc:blue:power is added as led_power with the initial state "switched on"
- soc:blue:power is added as led_soc_blue_power with the initial state "switched off"

With the final result of a switched off power led after boot.

The only led that needs to be added is the BTHOMEHUBV5A specific dimmed led.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47850
2015-12-11 15:05:30 +00:00
Jo-Philipp Wich
9157360ac5 lantiq: fix logic error in dsl board.d code
Starting with r47755 the pppoe wan interface section isn't any longer added to
the network config on firstboot, using the default configuration. Since the
commit message does not mention such a change, I assume that this wasn't
intentionally.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47793
2015-12-06 08:41:22 +00:00
Felix Fietkau
ec1b121769 lantiq: add VDSL2 vectoring status information
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47785
2015-12-05 09:52:42 +00:00
Felix Fietkau
e82404ce6c lantiq: get rid of the dsl_fw mtd partition
Now that we have redistributable vdsl/adsl firmware blobs in /lib/firmware,
we can drop the dsl_fw partition and extend the firmware partition.

Signed-off-by: Andre Heider <a.heider@gmail.com>

SVN-Revision: 47783
2015-12-05 09:52:30 +00:00
Felix Fietkau
fff859a1f6 lantiq: remove 3.18 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47774
2015-12-05 09:51:25 +00:00
Felix Fietkau
8b30afb005 lantiq: fix a race condition in the SPI driver leading to rx FIFO overflows (and subsequent timeouts)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47770
2015-12-04 20:26:22 +00:00
Felix Fietkau
9330296932 lantiq: re-enable spi-xway for TD-W89X0 now that it is fixed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47768
2015-12-04 18:35:20 +00:00
Felix Fietkau
b963cec01c lantiq: fix xway spi driver timeout issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47767
2015-12-04 18:35:12 +00:00
Felix Fietkau
ae10274239 lantiq: clean up the xrx200 ethernet driver and fix stability issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47766
2015-12-04 17:44:06 +00:00
Felix Fietkau
435e7fb295 lantiq: move esi calls to dsl_cpe_control scripts to fix ordering wrt. loading vr9 drivers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47764
2015-12-04 17:42:51 +00:00
Jo-Philipp Wich
5ebc5de49d lantiq: switch from uci-defaults to board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47755
2015-12-04 12:32:44 +00:00
Felix Fietkau
46112609d0 lantiq: fix up m25p80 device ids (#20975)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47690
2015-12-02 17:20:39 +00:00
Hauke Mehrtens
34e0d3cb5a lantiq: fix compile error
This fixes a problem introduced in r47624.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47628
2015-11-24 20:12:21 +00:00
Felix Fietkau
bb1c915f1e kernel: update m25p80 in 4.1 to the latest version from 4.4-rc1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47624
2015-11-24 18:59:28 +00:00
John Crispin
570c35a599 lantiq: add phy led config support over devicetree bindings
This patch adds the posibility to config the led behaviour of the lantiq phys
over the devicetree bindings.It patches the 0023-NET-PHY-adds-driver-for-lantiq-PHY11G
for 3.18 and 4.1. I have also added a register description overview for
applicable values. This goes to the documentation folder in the linux kernel.

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>

SVN-Revision: 47566
2015-11-21 21:25:43 +00:00
John Crispin
0206a400cf lantiq: tweak DWC2 default parameters
This patch improves the default configuration of DWC2 on lantiq SoCs
somewhat:
 * Set maximum packet count to largest allowed value by the DWC2 (511)
 * Use 16-bit DMA bursts
 * Divide fifo buffers more evenly

Default fifo buffer sizes from original ltq-hcd driver seem really
irrational. For example according to DWC2 data book rxfifo size of 240
will not fit even a single full length USB packet. On the other hand
non-periodic tx fifo size of 240 is more than enough to fit one complete
packet.

Change the sizes around to improve the situation and to fix some issues
especially with isochronous USB transfers.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>

SVN-Revision: 47563
2015-11-21 21:25:20 +00:00
Hauke Mehrtens
ff64ae8293 lantiq: add clk_round_rate()
This adds a basic implementation of clk_round_rate()
The clk_round_rate() function is called by multiple drivers and
subsystems now and the lantiq clk driver is supposed to export this,
but doesn't do so, this causes linking problems like this one:
ERROR: "clk_round_rate" [drivers/media/v4l2-core/videodev.ko] undefined!

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47254
2015-10-25 22:46:46 +00:00
Hauke Mehrtens
da94b00df5 kernel: update kernel 4.1 to version 4.1.11
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.11

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47252
2015-10-25 17:32:01 +00:00