Commit Graph

28864 Commits

Author SHA1 Message Date
John Crispin
74397a14ca iwinfo: add AR9580 with new subsystem device ID and QCA9880 with no subsystem vendor/device IDs
The AR9580 with the new ID can be found in the EnGenius ESR900 and the
QCA9880 without any subsystem IDs can be found in the EnGenius ESR1750.

Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42793
2014-10-06 04:53:04 +00:00
John Crispin
73acd5050f ar71xx: add support for TP-LINK TL-WR847N v8 (clone of TL-WR841N/ND v8)
Signed-off-by: Jaehoon You <teslamint@gmail.com>

SVN-Revision: 42792
2014-10-06 04:52:57 +00:00
John Crispin
9f08790436 kernel: add rtc-ds1307 module support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42791
2014-10-06 04:52:51 +00:00
John Crispin
fcbad42acd kernel: add ledtrig-transient module support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42790
2014-10-06 04:52:44 +00:00
John Crispin
d76b7e0221 ramips: D-Link DIR-810L: make led naming consistent with other boards
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42789
2014-10-06 04:52:36 +00:00
John Crispin
98114e7cdd ralink: Add missing code to free GPIO on Ralink SoC
Signed-off-by: schildt@ibr.cs.tu-bs.de
Acked-by: info@gerhard-bertelsmann.de

SVN-Revision: 42788
2014-10-06 04:52:26 +00:00
John Crispin
70d56d749b hostapd: read missing parameter for dynamic VLANs
In r41872 Dynamic VLAN support was reintroduced, but the vlan_naming
parameter is not read while setting up the config, so it always
defaults to 1.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

SVN-Revision: 42787
2014-10-06 04:52:21 +00:00
John Crispin
491e028e2d ar71xx: add LED defaults for the EnGenius ESR1750
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42786
2014-10-06 04:52:13 +00:00
John Crispin
b04bb3eea7 ramips: Support for RAMIPS based Tripmate HT-TM02 board
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.

Signed-off-by: Ron Curry <wingspinner@gmail.com>

SVN-Revision: 42785
2014-10-06 04:52:07 +00:00
John Crispin
7ab5357280 firmware-utils: add NEXX factory image support
This patch adds support to encode and decode images for certain types of
NEXX routers.

SVN-Revision: 42784
2014-10-06 04:52:01 +00:00
John Crispin
7860c9707a sysupgrade: preserve symlinks in backups
Signed-off-by: Catalin Patulea <catalinp@google.com>

SVN-Revision: 42783
2014-10-06 04:51:56 +00:00
John Crispin
e2c3c2280c ar71xx: fix reset button gpio for OM2P/OM2P-HS
A typo in the definition for the OM2P reset button disabled its functionality
in OpenWrt. The actual button for these two devices is "1" and not "11".

Signed-off-by: Oren Poleg <oren@poleg.org>
[sven@open-mesh.org: added a commit subject+message]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 42782
2014-10-06 04:51:51 +00:00
Felix Fietkau
b0ef5e66fa build: remove useless quote stripping for KERNELNAME, add fallback for it in the kernel build command line
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42781
2014-10-05 20:17:23 +00:00
Felix Fietkau
f35da063bc targets: remove useless quotes around KERNELNAME
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
2014-10-05 20:17:19 +00:00
Felix Fietkau
8a450a93a5 lantiq: remove the useless ltqtapi.mk include file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42778
2014-10-05 18:58:47 +00:00
Felix Fietkau
b6fb77ebfe gcc: remove version 4.8.0
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42777
2014-10-05 18:40:43 +00:00
Felix Fietkau
c7bc3ad908 binutils: remove old versions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42776
2014-10-05 18:40:38 +00:00
Zoltan Herpai
fbbce1c8d8 sunxi: re-add rootfs build when no profile is set, fixes #17980, thanks.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42775
2014-10-05 17:32:36 +00:00
Felix Fietkau
5121981a9e iproute2: add conflict for ip with ip-full
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42774
2014-10-05 17:13:34 +00:00
Felix Fietkau
a402b5c48d build: make sure modules are modposted after initramfs image is built
Otherwise the modpost steps for individual modules that are compiled
manually (using make package/<name_of_module>/install) will give warning
of missing symbols when that module depends other modules.

This is caused by the Module.symvers file not containing any symbols
anymore of external modules when the initramfs image is built without
specifically giving the modules target.

Signed-off-by: Tjalling Hattink <t.hattink@fugro.nl>

SVN-Revision: 42773
2014-10-05 16:58:16 +00:00
Felix Fietkau
bf0305725a hostapd: add conflicts with wpad(-mini) to hostapd and wpa_supplicant
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42772
2014-10-05 16:41:50 +00:00
Felix Fietkau
c6ebce701e build: propagate package conflicts to opkg metadata
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42771
2014-10-05 16:41:38 +00:00
Felix Fietkau
5e4789671a build: add support for declaring package CONFLICTS which only affect selecting built-in packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42770
2014-10-05 16:41:33 +00:00
Felix Fietkau
646dfde826 Fix broken implementation of NOEXECSTACK flag for MIPS architectures for gcc-linaro-4.8
This patch ensures that libgcc_s.so properly honours the NOEXECSTACK flag
for MIPS builds, when gcc-linaro-4.8 or 4.9 is the chosen C compiler.

Signed-off-by: Andrew McDonnell <bugs@andrewmcdonnell.net>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42769
2014-10-05 15:21:30 +00:00
Felix Fietkau
8cc9f46dfa ath10k: update firmware to the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42768
2014-10-05 14:59:59 +00:00
Felix Fietkau
749d865aa4 gcc: gcc 4.9.x disable libsanitize
gcc 4.9.x enables building of libsanitize

- libsanitize needs some headers that are not available
  in uclibc (netrom/netrom.h)

according to buildroot project:
- build fail with musl
- need wordexp with uclibc which increases uclibc size
http://git.buildroot.net/buildroot/commit/?id=5f4d658d888b539de9a6247ae5b1a0999de5d4ec
http://git.buildroot.net/buildroot/commit/?id=554e29e267e6b36a0fd78c82cbad2c82d939eb7f

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 42767
2014-10-05 14:59:45 +00:00
Felix Fietkau
063074cf0c mac80211_hwsim: select 802.11n support for hostapd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42766
2014-10-05 11:50:42 +00:00
Felix Fietkau
62e6e788dd relayd: update to the latest version, fixes a build error with the new gcc (#18010)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42765
2014-10-05 11:01:49 +00:00
Felix Fietkau
281f40cef2 hostapd: allow using iapp for any encryption type (fixes #18022)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42764
2014-10-05 10:55:55 +00:00
Felix Fietkau
cd80931e03 hostapd: merge an upstream patch for pmksa cache
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42762
2014-10-05 10:26:26 +00:00
Felix Fietkau
b5529ed26b iwinfo: detect AC PHY for broadcom-wl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42761
2014-10-05 10:26:17 +00:00
Felix Fietkau
dac05f6724 iwinfo: detect HT PHY for broadcom-wl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42760
2014-10-05 10:26:10 +00:00
Felix Fietkau
349b20c197 iwinfo: fix handling of accessing nl80211 interfaces via radio*
look up device path via uci instead of assuming a direct phy index

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42759
2014-10-05 10:26:05 +00:00
Felix Fietkau
0e439d8a2a iwinfo: enable nl80211 support based on cfg80211, not mac80211
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42758
2014-10-05 10:25:55 +00:00
Jo-Philipp Wich
3158e7cca2 iwinfo: handle 802.11ac mode for lua
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>

SVN-Revision: 42757
2014-10-04 09:38:17 +00:00
Jonas Gorski
14ebb012a4 brcm63xx: fix wrong fixups pointer
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42756
2014-10-03 11:03:58 +00:00
Steven Barth
8a971b2770 base-files: remove a 'not found' error message during system boot
During boot, a not found message is displayed for systems which do
not have uci 'network.globals.ula_prefix' defined in
/etc/config/network. The error message itself is not used and can
be ignored.

Signed-off-by: Michel Stam <m.stam@fugro.nl>

SVN-Revision: 42755
2014-10-03 10:56:43 +00:00
Rafał Miłecki
7436b17075 bcm53xx: build R6250 firmware with "Other Regions" region
This prevents vendor firmware from warning about incompatible region.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42754
2014-10-03 10:40:12 +00:00
Felix Fietkau
156b296b20 ar8216: set the pvid based on runtime state instead of port number to fix learning with enable_vlan = 0
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42753
2014-10-02 20:00:41 +00:00
Steven Barth
64e3cb9fe8 toolchain: Fix libthreaddb not being installed
Signed-off-by: Michel Stam <m.stam@fugro.nl>

SVN-Revision: 42752
2014-10-02 19:47:39 +00:00
Steven Barth
3cdeac4173 busybox: remove validation message from bootup
A message:
uinteger - 9 = true
is displayed during boot. This is the result of the validate_data
command checking the cron log level. As the output is not
interesting, only the result, filter...

Signed-off-by: Michel Stam <m.stam@fugro.nl>

SVN-Revision: 42751
2014-10-02 19:47:33 +00:00
Steven Barth
e15f03e5de authsae: update to latest version
Send a netlink call to leave the mesh when meshd exits
Make hunting-and-pecking loop (more) resistant to side channel attack

Signed-off-by: Michel Stam <m.stam@fugro.nl>

SVN-Revision: 42750
2014-10-02 19:47:28 +00:00
Steven Barth
75572d0d31 6in4: Tos support
Tos support is added as a string parameter which can have the following values :
   -inherit (outer header inherits the tos value of the inner header)
   -hex value

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 42749
2014-10-02 19:38:15 +00:00
Steven Barth
e7e54ef672 6to4: Tos support
Tos support is added as a string parameter which can have the following values :
   -inherit (outer header inherits the tos value of the inner header)
   -hex value

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 42748
2014-10-02 19:38:04 +00:00
Steven Barth
e9d15da0da 6rd: Tos support
Tos support is added as a string parameter which can have the following values :
     -inherit (outer header inherits the tos value of the inner header)
     -hex value

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 42747
2014-10-02 19:37:58 +00:00
Steven Barth
36b05bbed3 IPIP: IP in IP package support
The package supports IP in IP by registering the ipip protocol handler

Following options are configurable
    -peeraddr (IPv4 remote address)
    -ipaddr (IPv4 local address)
    -ttl (time to live of encapsulating packet)
    -tos (type of service of encapsulating packet either inherit (outer header inherits the value of the inner header) or hex value)
    -df (don't fragment flag of encapsulating packet)
    -mtu (IPIP tunnel mtu)
    -tunlink (bind tunnel to this interface)
    -zone (firewall zone to which the IPIP tunnel will be added)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 42746
2014-10-02 19:37:36 +00:00
Steven Barth
73179a188c netifd: fix an error message during network shutdown
When 'wifi down' is called by /etc/init.d/network, it is run from
stop_service( ). This function is in turn invoked from stop( ).
stop( ) messes up the order by first procd_kill-ing the network
settings, then calling wifi to down the wifi networking
interfaces. By redefining stop( ) instead, the proper order is
restored.

Signed-off-by: Michel Stam <m.stam@fugro.nl>

SVN-Revision: 42745
2014-10-02 19:37:25 +00:00
Steven Barth
1c166058df netifd: add IPIP tunnel support (thx Hans Dedecker)
SVN-Revision: 42744
2014-10-02 19:37:17 +00:00
Rafał Miłecki
66922082ed bcm53xx: early support for Netgear R6300 V2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42743
2014-10-02 19:30:08 +00:00
Steven Barth
def69a96e9 map: fix portsets starting with 0 and use regular NAT for 1:1 MAP
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42741
2014-10-02 19:15:38 +00:00