Commit Graph

42409 Commits

Author SHA1 Message Date
Nick Hainke
296ae7ab89 iwinfo: update to version 2018-07-24
Update to new iwinfo version.
Adds support for channel survey.
Adds ubus support.
Etc.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2018-07-30 10:43:31 +02:00
Edi Turn
e9dee19487 grub2: fix packed-not-aligned error on GCC 8
Fix the compile error "packed-not-aligned" when using GCC 8.

Signed-off-by: Edi Turn <yyxstter@gmail.com>
2018-07-30 10:42:47 +02:00
Daniel Engberg
5647cc7bd4 treewide: Bump PKG_RELEASE due to mbedtls update
Bump PKG_RELEASE on packages that depends on (lib)mbedtls to avoid library
mismatch.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-07-30 10:35:12 +02:00
Daniel Engberg
5b614e3347 mbedtls: Update to 2.12.0
Update mbedtls to 2.12.0
Multiple security fixes
Add support for Chacha20 and Poly1305 cryptographic primitives and their
associated ciphersuites

Difference in size on mips_24kc (ipk):
164kbytes (167882 bytes)
170kbytes (173563 bytes)

https://tls.mbed.org/tech-updates/releases/mbedtls-2.12.0-2.7.5-and-2.1.14-released

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-07-30 10:35:12 +02:00
Daniel Engberg
a93b6edfec toolchain/binutils: Add binutils 2.31.1
Add binutils 2.31.1 to repo

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-07-30 10:35:11 +02:00
Thibaut VARÈNE
091e915d99 ar71xx: improve MikroTik wAP R support
81d446b045 introduced incomplete
support for this device.

This patch attempts to correct the situation based on OEM source
code.

LED1-3 are GSM mode on OFW (2G/3G/4G) hence unassigned here.

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Tested-by: David Ehrmann <ehrmann@gmail.com>
2018-07-30 10:35:11 +02:00
Thibaut VARÈNE
5c2419b6f8 ar71xx: add missing diag LED support for RB wAP 2nD
3b15eb06c3 did not include diag.sh
edit

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2018-07-30 10:35:11 +02:00
Thibaut VARÈNE
e76c048d34 ar71xx: rbspi: mark rb911L user led as active low
The active_low flag was missing for the user LED. This LED is open drain
(confirmed in OEM source) and open drain only makes sense for active low
GPIOs.

The two wireless LEDs mentioned in the comments are also #defined for
future reference.

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Tested-by: Ryan Mounce <ryan@mounce.com.au>
2018-07-30 10:35:11 +02:00
Thibaut VARÈNE
e99f760235 ar71xx: rbspi: fix RB wAP AC gpio conflict and LED
e15c63a375 introduced code that was trying
to register GPIO 1 as both an LED and a button. The OEM source makes it
clear that LED1 is not wired to the SoC GPIOs. GPIO 1 is the reset button.

Furthermore the (green) power led default state should also be defined,
(matching OEM source), and it should be used by diag.sh since it's
currently the only software-controllable LED.

This patch fixes these issues and renames the corresponding #defines for
clarity

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2018-07-30 10:35:11 +02:00
Thibaut VARÈNE
03562bfcdb ar71xx: rbspi: clarify USB power gpios action
The gpios that control power toggle for USB on the RouterBOARD devices
are active low _off_ switches.

When they are active (low), power is off. When they are inactive
(high), power is on.

Rename GPIO defines, set gpios to GPIOF_ACTIVE_LOW for consistency and
reflect their true action in the display name. This brings openwrt code
in line with OEM.

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Tested-by: Ryan Mounce <ryan@mounce.com.au>
2018-07-30 10:35:11 +02:00
Rosen Penev
0394ca26c3 admswconfig: Remove dead URL + HTTPS
Found using uscan.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-07-30 10:35:11 +02:00
Rafał Miłecki
5e8b4be531 kernel: add DT binding support to the mtd redboot parser
It allows using that parser with the "compatible" set in DT.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-30 08:39:52 +02:00
Christian Lamparter
b70d3557e0 apm821xx: clean up gpio-hogs
convert the usb and both sata port power related gpio-hogs to
what they really are: fixed-regulators.

The ethernet phy-reset gpio-hog is replaced by a proper
upstream (4.15+) reset-gpios property in the mdio-node.
So this will work eventually.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-30 08:12:32 +02:00
Christian Lamparter
cff6548948 apm821xx: split MBL's rootfs.img.gz into a sysupgrade and factory image
@vahid-dan reported a issue with extracting the rpi images with
Gnome's Archive Manager:
"Ubuntu Archive Manager cannot extract the file and it just
throws a general error message: "An error occurred while
extracting files".
<https://forum.lede-project.org/t/corrupted-pre-built-v18-06-0-rc2-image-for-rpi>

The MBL's rootfs.img.gz image is generated in much the same way.
Hence this patch preemptively splits the rootfs.img.gz image into
a sysupgrade and a factory image.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-30 08:12:13 +02:00
Christian Lamparter
aed4799d6d apm821xx: build squashfs-rootfs images for the MBL
This patch adds support for squashfs as the root filesystem.

advantages:
 - migrate from a existing -ext4 installation and back
   with the sysupgrade utility
 - existing partition layout will not be lost during switch
 - slightly smaller image size as compared to the -ext4 image.

disadvantages:
 - needs f2fs + tools. This is because fstools rootdisk.c decides based
   on the partition size (currently root partitions > 100 MiB) f2fs is
   used as the rootfs_data filesystem.
 - rootfs_data is placed into the rootfs partition after the squashfs.
   This makes it difficult for tools that expect a /dev/sda${X} device.
   It also makes it difficult for data recovery tools as they might not
   expect to find a embedded partition or will be slightly confused.
   ... or will not support f2fs.

For people with existing build configurations: make sure to include mkf2fs
and f2fsck packages into the image. Otherwise the new -squashfs image will
only boot from the ram-overlay.

Note:
All overlay data (configurations/all installed packages/...) will be
placed in inside the rootfs partition (i.e. /dev/sda2) just after the
squashfs image.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-30 08:11:56 +02:00
Christian Lamparter
7516a96011 brcm2708: split sdcard.img.gz into a sysupgrade and factory image
@vahid-dan reported a issue with extracting the rpi images with
Gnome's Archive Manager:
"Ubuntu Archive Manager cannot extract the file and it just
throws a general error message: "An error occurred while
extracting files".
<https://forum.lede-project.org/t/corrupted-pre-built-v18-06-0-rc2-image-for-rpi>

@blogic told me to split the single sdcard.img.gz for the RPi
into a sysupgrade and a factory image for all brcm2708 targets.
The factory images will have no metadata attached, this way
these utilities that can't deal with the attached metadata will
not fail for no reason.

Cc: John Crispin <john@phrozen.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-30 08:11:36 +02:00
Christian Lamparter
df495305f3 ipq-wifi: add a note / reminder about upstreaming new board files
|Please send a mail with your device-specific board files upstream.
|You can find instructions and examples on the linux-wireless wiki:
|<https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-30 08:11:21 +02:00
Jonas Gorski
7880a6f7fe brcm63xx: drop linux,part-probe usage where possible
It was present as 4.4 compatibility, but since we now use 4.9 or later
with the new upstream solution, we don't need it anymore.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-07-29 15:38:33 +02:00
Jonas Gorski
abb28bec25 brcm63xx: drop own implementation of DT partitions in favour of upstream
The binding works the same, so we can just drop the revert and the patch.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-07-29 15:38:33 +02:00
Rosen Penev
fc89831ae8 thc-ipv6: Update URLs
Development has moved to GitHub. Found using UScan.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-07-29 12:11:31 +02:00
Rosen Penev
31f87ebcb2 libjson-c: Update package URL
Found through UScan.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-07-29 12:05:53 +02:00
Rafał Miłecki
0417b08b06 bcm53xx: revert SPI controller commit breaking flash reads
That upstream commit caused instability in flash reads. It was reported
but there isn't any proper fix as for now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-29 11:02:57 +02:00
Daniel Engberg
b078229412 tools/cmake: Update to 3.12.0
Update cmake to 3.12.0
Remove 140-curl-fix-libressl.patch as fix is in upstream

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-07-29 10:08:20 +02:00
Rafał Miłecki
a07730472c bcm53xx: backport BCM5301X/BCM53573 dts commits from 4.19+
This includes Linksys EA9500 support, BCM53573 timer fix and
upstream-ready partitions patch that replaces two downstream hacks.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-28 21:48:10 +02:00
Rafał Miłecki
8a175ea219 bcm53xx: switch USB 3.0 PHY DT description to use MDIO bus
USB 3.0 PHY is attached to the MDIO bus and should be supported
(accessed) as a MDIO device. This wasn't known initially which resulted
in writing driver that was working with MDIO bus (using some magic
values) without knowing it.

This commit updates DT to properly describe MDIO & USB 3.0 PHY and
enables required kernel drivers.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-28 21:46:08 +02:00
Rafał Miłecki
5c8b8a3fd4 bcm53xx: backport DT fix for I2C controller interrupt
Specified interrupt type was incorrect.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-28 21:36:33 +02:00
Dmitry Tunin
7a6b2badfa igmpproxy: add a silent logging option
[0-3](none, minimal[default], more, maximum)

It is not 100% backward compatible, because now 0 disables logging

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
2018-07-28 15:20:39 +01:00
Kevin Darbyshire-Bryant
1e93ef8498 dnsmasq: bump to dnsmasq v2.80test3
Refresh patches

Upstream commits since last bump:

3b6eb19 Log DNSSEC trust anchors at startup.
f3e5787 Trivial comment change.
c851c69 Log failure to confirm an address in DHCPv6.
a3bd7e7 Fix missing fatal errors when parsing some command-line/config options.
ab5ceaf Document the --help option in the french manual
1f2f69d Fix recurrent minor spelling mistake in french manual
f361b39 Fix some mistakes in french translation of the manual
eb1fe15 When replacing cache entries, preserve CNAMES which target them.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-07-28 11:16:41 +01:00
Rafał Miłecki
2a598bbaa3 kernel: backport mtd support for subpartitions in DT
This is a new & warm feature that allows nesting partiitons in DT and
mixing their types (e.g. static vs. dynamic). It's very useful for
boards that have most partitions static but some of them require extra
parsing (e.g. a "firmware" partition).

It's required to successfully backport support for new devices using
that new syntax in their DT files.

Since brcm63xx has a custom alternative patch the upstream one is being
reverted for it. The plan is to make brcm63xx use the upstream
implementation.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-27 22:16:24 +02:00
Rafał Miłecki
4c1aa64b4d brcm47xx: revert upstream commit breaking BCM4718A1
This fixes kernel hang when booting on BCM4718A1 (& probably BCM4717A1).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-27 15:58:51 +02:00
Rafał Miłecki
6bcafea2c0 kernel: backport mtd patches with Broadcom of_match_table-s
Two tiny & trivial patches with no regression risk. One simplifies
bcm53xx downstream patch.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-27 15:55:01 +02:00
Daniel Golle
af4b23dde2 util-linux: package blockdev executable
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-07-27 12:51:03 +02:00
Masashi Honma
d05967baec wwan: Fix teardown for sierra_net driver
The sierra_net driver is using proto_directip_setup for setup. So use
proto_directip_teardown for teardown.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2018-07-27 11:17:20 +02:00
Syrone Wong
7dfd72dfff ead: use new protocol setting API since libpcap 1.9.0
Dropped the protocol API specific symbol: HAS_PROTO_EXTENSION and
switch to the official API

Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
2018-07-27 11:17:20 +02:00
Syrone Wong
4d57c696b1 libpcap: update to 1.9.0
001-Fix-compiler_state_t.ai-usage-when-INET6-is-not-defi.patch dropped due to upstream
002-Add-missing-compiler_state_t-parameter.patch dropped due to upstream

202-protocol_api.patch dropped due to implemented upstream by another way
upstream commit: 55c690f6f8
and renamed via: 697b1f7e9b

ead is the only user who use the protocol api, we have to use the new api since libpcap 1.9.0

Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
2018-07-27 11:17:20 +02:00
Rafał Miłecki
c0608c6a27 mac80211: brcmfmac: backport 4.19 patches preparing monitor mode support
Monitor mode isn't supported yet with brcmfmac, it's just an early work.
This also prepares brcmfmac to work stable with new firmwares which use
updated struct for passing STA info.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-27 08:04:14 +02:00
Rafał Miłecki
b26214adb5 mac80211: backport brcmfmac fixes & debugging helpers from 4.18
The most important is probably regression fix in handling platform
NVRAM. That bug stopped hardware from being properly calibrated breaking
e.g. 5 GHz for Netgear R8000.

Other than that it triggers memory dumps when experiencing firmware
problems which is important for debugging purposes.

Fixes: 7e8eb7f309 ("mac80211: backport brcmfmac firmware & clm_blob loading rework")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-26 23:21:46 +02:00
Jo-Philipp Wich
7316515891 ubus: update to latest git HEAD
40e0931 libubus: pass an empty UBUS_ATTR_DATA block if msg is NULL on invoke

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-26 16:48:07 +02:00
Jo-Philipp Wich
88c88823d5 odhcpd: update to latest git HEAD
44cce31 ubus: avoid dumping interface state with NULL message

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-26 14:53:05 +02:00
Jo-Philipp Wich
3ee2c76ae0 firewall: update to latest git HEAD
aa8846b ubus: avoid dumping interface state with NULL message

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-26 08:44:53 +02:00
John Crispin
a5c3bbaf56 ubus: update to latest git HEAD
884be45 libubus: check for non-NULL data before running callbacks

Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:15:45 +02:00
John Crispin
5dc32620c4 libubox: update to latest git HEAD
c83a84a fix segfault when passed blobmsg attr is NULL

Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:13:19 +02:00
John Crispin
ffc40d2eae ipq40xx: move essedma patches into same range
Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:13:19 +02:00
John Crispin
e725d3080c ipq40xx: sync kernel config
Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:13:18 +02:00
John Crispin
95672e0433 ipq40xx: use patches that were sent upstream
Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:13:18 +02:00
John Crispin
e8c58e7ddd ipq40xx: move dts file patches to end of series
Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:00:21 +02:00
John Crispin
c913288844 ipq40xx: cleanup USB support
remove the 2 USB PHY drivers and add a generic PHY driver instead

Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:00:21 +02:00
John Crispin
3d456a50f4 ipq40xx: drop no-op cpu_idle symbol patch
Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:00:21 +02:00
David Bauer
5409dcffbd ath79: fix OCEDO Raccoon
The OCEDO Raccoon only has one ethernet port, but currently uci sections
for WAN and LAN are created.

Additionally, newer versions of the devices U-Boot (units with SteelWRT)
set the kernel-cmdline and therefore overwrite the partition-layout.
We fix this by overwriting the cmdline supplied by the bootloader.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-07-25 08:59:33 +02:00
Mathias Kresin
4cbf5601f9 ramips: remove stale get_status_led call
The get_status_led() function was removed due to the convertion to dts
alias based status led.

Since we don't need the boardname any longer, the functions.sh include
isn't required any more.

Fixes: c9c4b2116c ("ramips: Use dts alias based status led")

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-07-25 08:57:17 +02:00