Elbert Mai
6a05d849e1
bcm27xx: correct cmdline.txt consoles for procd
...
Commit [ca8c30208d5e][1] updates procd to handle muliple "console=" on the
kernel command line. This affects Raspberry Pi builds because cmdline.txt
specifies a UART console and a virtual console on HDMI, in that order.
When procd finds multiple consoles on the command line, it attempts to
open /dev/console. Linux uses the [last console][2] for /dev/console, so
procd opens the virtual console on Raspberry Pi. This completely disables
the UART console and causes [strange behavior][3] on the virtual console.
Prior to ca8c30208d5e, procd would always open the first console, which is
the UART console.
The simplest fix without reverting ca8c30208d5e is to swap the order of
console options in cmdline.txt. By putting the UART console last, procd
handles the serial console correctly as before.
[1]: https://git.openwrt.org/?p=project/procd.git;a=commit;h=ca8c30208d5e1aaa2c0e3f732c4c9944735e9850
[2]: https://www.kernel.org/doc/html/latest/admin-guide/serial-console.html
[3]: https://forum.openwrt.org/t/rasberry-pi-4-model-b-keyboards-gone-wild/195594
Signed-off-by: Elbert Mai <code@elbertmai.com>
2024-05-01 20:22:42 +02:00
Shiji Yang
9e86e0b33b
kernel: bump 6.1 to 6.1.89
...
Changelogs:
https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.67
https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.68
https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.69
Upstreamed patches:
target/linux/generic/backport-6.1/740-v6.9-01-netfilter-flowtable-validate-pppoe-header.patch [1]
target/linux/generic/backport-6.1/740-v6.9-02-netfilter-flowtable-incorrect-pppoe-tuple.patch [2]
target/linux/generic/backport-6.1/790-48-STABLE-net-dsa-mt7530-trap-link-local-frames-regardless-of-.patch [3]
target/linux/generic/backport-6.1/790-50-v6.10-net-dsa-mt7530-fix-mirroring-frames-received-on-loca.patch [4]
target/linux/generic/backport-6.1/790-16-v6.4-net-dsa-mt7530-set-all-CPU-ports-in-MT7531_CPU_PMAP.patch [5]
target/linux/generic/backport-6.1/790-46-v6.9-net-dsa-mt7530-fix-improper-frames-on-all-25MHz-and-.patch [6]
target/linux/generic/backport-6.1/790-47-v6.10-net-dsa-mt7530-fix-enabling-EEE-on-MT7531-switch-on-.patch [7]
target/linux/mediatek/patches-6.1/220-v6.3-clk-mediatek-clk-gate-Propagate-struct-device-with-m.patch [8]
target/linux/mediatek/patches-6.1/222-v6.3-clk-mediatek-clk-mtk-Propagate-struct-device-for-com.patch [9]
target/linux/mediatek/patches-6.1/223-v6.3-clk-mediatek-clk-mux-Propagate-struct-device-for-mtk.patch [10]
target/linux/mediatek/patches-6.1/226-v6.3-clk-mediatek-clk-mtk-Extend-mtk_clk_simple_probe.patch [11]
Symbol changes:
MITIGATION_SPECTRE_BHI (new) [12]
SPECTRE_BHI_{ON,OFF} (deprecated) [12]
References:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=8bf7c76a2a207ca2b4cfda0a279192adf27678d7
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=f1c3c61701a0b12f4906152c1626a5de580ea3d2
[3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=19643bf8c9b5bb5eea5163bf2f6a3eee6fb5b99b
[4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=e86c9db58eba290e858e2bb80efcde9e3973a5ef
[5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=013c787d231188a6408e2991150d3c9bf9a2aa0b
[6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=41a004ffba9b1fd8a5a7128ebd0dfa3ed39c3316
[7] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=7d51db455ca03e5270cc585a75a674abd063fa6c
[8] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=082b831488a41257b7ac7ffa1d80a0b60d98394d
[9] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=6f5f72a684a2823f21efbfd20c7e4b528c44a781
[10] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=a4fe8813a7868ba5867e42e60de7a2b8baac30ff
[11] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=c1d87d56af063c87961511ee25f6b07a5676d27d
[12] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=d844df110084ef8bd950a52194865f3f63b561ca
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-04-30 20:18:15 +02:00
Hauke Mehrtens
2909cce1b2
kernel: bump 6.1 to 6.1.86
...
Removed upstreamed:
bcm27xx/patches-6.1/950-1235-drm-vc4-don-t-check-if-plane-state-fb-state-fb.patch [1]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.86&id=48bfb4b03c5ff6e1fa1dc73fb915e150b0968c40
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-14 18:03:37 +02:00
Hauke Mehrtens
1a44a260fe
kernel: bump 6.1 to 6.1.84
...
Removed upstreamed:
pistachio/patches-6.1/110-pwm-img-fix-clock-lookup.patch [1]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.84&id=44b6fb6cdedb2c391a2da355521d4610b2645fcc
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-14 18:03:37 +02:00
Hauke Mehrtens
2ad898e091
kernel: bump 6.1 to 6.1.83
...
Removed upstreamed:
generic/backport-6.1/789-STABLE-01-net-dsa-mt7530-prevent-possible-incorrect-XTAL-frequ.patch [1]
generic/backport-6.1/789-STABLE-02-net-dsa-mt7530-fix-link-local-frames-that-ingress-vl.patch [2]
generic/backport-6.1/789-STABLE-03-net-dsa-mt7530-fix-handling-of-all-link-local-frames.patch [3]
generic/pending-6.1/735-net-mediatek-mtk_eth_soc-release-MAC_MCR_FORCE_LINK-.patch [4]
generic/pending-6.1/736-net-ethernet-mtk_eth_soc-fix-PPE-hanging-issue.patch [5]
Manual adjusted the following patches:
mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=be4512b9ac6fc53e1ca8daccbda84f643215c547
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=f1fa919ea59655f73cb3972264e157b8831ba546
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=86c0c154a759f2af9612a04bdf29110f02dce956
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=6b62bad2da1b338f452a9380639fc9b093d75a25
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=f78807362828ad01db2a9ed005bf79501b620f27
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-14 18:03:37 +02:00
Álvaro Fernández Rojas
6512333518
bcm27xx: bcm2712: backport RP1 interrupt affinity
...
Support for setting the CPU affinity on RP1 has been added to RPi linux v6.6
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-04-07 22:12:42 +02:00
Álvaro Fernández Rojas
20fe7e687e
bcm27xx: update 6.1 patches from RPi foundation
...
Sync 6.1 patches with the RPi foundation.
Since rpi-6.6.y is now the main branch of the RPi foundation, there won't be
any new patches for linux 6.1.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-04-07 22:12:42 +02:00
Mieczyslaw Nalewaj
0b10e5a5dc
bcm27xx: refresh patches
...
Refresh patches for kernel 6.1.82 with make target/linux/refresh.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-03 11:47:18 +02:00
Qingfang Deng
6b007d2512
treewide: disable spectre mitigation on unaffected Arm64 targets
...
Cortex-A53 is not vulnerable to any Spectre variants.
Ref: https://developer.arm.com/Arm%20Security%20Center/Speculative%20Processor%20Vulnerability
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
2024-03-23 20:00:49 +01:00
Qingfang Deng
54f9744c82
treewide: disable spectre mitigation on unaffected Arm32 targets
...
Cortex-A5 and Cortex-A7 are not vulnerable to any Spectre variants.
Ref: https://developer.arm.com/Arm%20Security%20Center/Speculative%20Processor%20Vulnerability
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
2024-03-23 20:00:49 +01:00
John Audia
3cd3afd92e
kernel: bump 6.1 to 6.1.82
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.82
All patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-03-19 00:33:51 +01:00
John Audia
dd02da54e9
kernel: bump 6.1 to 6.1.81
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.81
All patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-03-11 21:51:37 +01:00
John Audia
13cdc8955c
kernel: bump 6.1 to 6.1.80
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.80
Manually rebased:
generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch[1]
All other patches automatically rebased.
1. Acknowledgement to @heheb and @DragonBluep. Upstream commit for ref: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.80&id=9c5662e95a8dcc232c3ef4deb21033badcd260f6
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-03-05 00:23:59 +01:00
Álvaro Fernández Rojas
fe0081eecf
bcm27xx: use PARTUUID for root in cmdline
...
This allows booting from USB/NVME while keeping SD compatibility.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-03-04 16:28:57 +01:00
Álvaro Fernández Rojas
fb80be6944
bcm27xx: pass signature to partition generation
...
Passes IMG_PART_SIGNATURE to ptgen instead of using the default "OWRT"
signature.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-03-04 16:27:39 +01:00
Álvaro Fernández Rojas
552c6b2472
bcm27xx: base-files: fix platform_copy_config
...
/boot/kernel*.img wildcard only works without quotation marks.
Fixes: 1a5e51ab00
("bcm27xx: base-files: fix platform_copy_config")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-03-04 16:20:55 +01:00
John Audia
33e72e0b3d
kernel: bump 6.1 to 6.1.79
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.79
Manually rebased:
ath79/patches-6.1/900-unaligned_access_hacks.patch
All other patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-02-24 19:25:02 +01:00
John Audia
5fe80218f9
kernel: bump 6.1 to 6.1.78
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.78
Manually rebased:
bcm27xx/patches-6.1/950-0865-usb-dwc3-Set-DMA-and-coherent-masks-early.patch
bcm27xx/patches-6.1/950-0124-Add-support-for-all-the-downstream-rpi-sound-card-dr.patch
All other patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, logic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, logic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-02-18 11:20:27 +00:00
Daniel Golle
3c34a5bf99
kernel: nvmem: correctly assign fwnode to MMC block device
...
Use device_set_node to make sure OF node gets assigned on block
devices to be used as NVMEM providers. While block partitions were
already working fine as NVMEM providers, bare block devices such as
mmcblk0boot1 will not work without this change.
Fixes: fc153aa8d9
("kernel: import pending patches adding support for NVMEM on UBI and MMC")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-02-18 03:25:39 +00:00
Daniel Golle
4cb6bd9a6d
mediatek: switch to pending XFI 10G Ethernet drivers
...
Replace previous patch adding paths and SerDes modes with patch series
pending upstream adding dedicated drivers for XFI T-PHY and USXGMII PCS,
extends LynxI PCS to be a standalone platform driver and as a consequence
makes much less changes to the actual Ethernet driver mtk_eth_soc.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-02-15 19:06:36 +00:00
Daniel Golle
d40756563c
kernel: backport phylink changes from mainline Linux
...
Let's pick a bunch of useful phylink changes which allow us to keep
drivers in sync with mainline Linux.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-02-15 19:06:36 +00:00
Daniel Golle
fc153aa8d9
kernel: import pending patches adding support for NVMEM on UBI and MMC
...
Similar to supporting nvmem-layouts on MTD devices, also allow referencing
UBI and MMC devices in DT.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-02-15 19:06:36 +00:00
Christian Marangi
16364e4100
generic: 6.1: backport QCA807x PHY patches
...
Backport QCA807x PHY patches merged upstream that introduce the new
concept of PHY package.
Also add in generic config the new Kconfig CONFIG_QCA807X_PHY.
All affected patch automatically refreshed with make
target/linux/refresh.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-11 21:08:26 +01:00
John Audia
f89904ad78
kernel: bump 6.1 to 6.1.77
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.77
Removed upstreamed:
generic/backport-6.1/707-v6.8-01-net-phy-at803x-fix-passing-the-wrong-reference-for-c.patch[1]
generic/backport-6.1/796-v6.8-ipmr-fix-kernel-panic-when-forwarding-mcast-packets.patch[2]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.77&id=7dc0fefd37dd5fb03fdac6e3e01b1c2291148ccb
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.77&id=d2f1b7fe74afd66298dbb3c7b39e7b62e4df1724
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-02-08 18:35:42 +01:00
John Audia
4a0839b44e
kernel: bump 6.1 to 6.1.76
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.76
All patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-02-08 18:35:42 +01:00
Álvaro Fernández Rojas
48d7376400
bcm27xx: refresh kernel configs
...
Refresh outdated kernel configs.
Fixes: b76fcf1bbe
("bcm27xx: enable video symbols"
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-05 18:50:48 +01:00
Marty Jones
94c9504bc7
bcm27xx: bcm2712: switch default ASPM policy to Powersave
...
Fixes instability issues with NVMe drives on RPi 5
Signed-off-by: Marty Jones <mj8263788@gmail.com>
2024-02-05 18:30:33 +01:00
Álvaro Fernández Rojas
2047a62684
bcm27xx: add isp-bcm2835 kernel module
...
kmod-isp-bcm2835 enables ISP HW on the Raspberry Pi.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-05 18:25:16 +01:00
Álvaro Fernández Rojas
f1364da7a3
bcm27xx: add codec-bcm2835 kernel module
...
kmod-codec-bcm2835 enables HW accelerated video decoding/encoding on the
Raspberry Pi.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-05 18:25:16 +01:00
Álvaro Fernández Rojas
b76fcf1bbe
bcm27xx: enable video symbols
...
CONFIG_MEDIA_CONTROLLER has to be enabled for Raspberry Pi V4L2 drivers.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-05 18:25:16 +01:00
Álvaro Fernández Rojas
316e23a65b
bcm27xx: camera-bcm2835: fix module autoload
...
camera-bcm2835 depends on video-videobuf2, which has 65 as load value.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-05 18:25:16 +01:00
Álvaro Fernández Rojas
e5194d1f37
bcm27xx: video: remove disabled video symbols
...
These symbols are now in the generic 6.1 config.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-05 18:25:16 +01:00
John Audia
2c363a070e
kernel: bump 6.1 to 6.1.75
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.75
Removed upstreamed:
generic/hack-6.1/321-powerpc_crtsavres_prereq.patch[1]
generic/pending-6.1/540-ksmbd-only-v2-leases-handle-the-directory.patch[2]
Rebased:
bcm27xx/patches-6.1/950-0670-fbdev-Don-t-cancel-deferred-work-if-pagelist-empty.patch[3]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.75&id=16b88e68b85d5520c28498bb847358ff6300cb90
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/fs/smb?h=v6.1.75&id=c866866c795296d3637ab0d48a3d8a3ef5d6f4a3
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.75&id=81f444f22816a82ada2cc787a2845cffc8c584a6
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-02-01 21:34:05 +01:00
Álvaro Fernández Rojas
0a65787675
bcm27xx: bcm2712: remove boot-2711 image files
...
According to Raspberry Pi documentation, the RPi 5 First Stage Bootloader
loads the linux kernel instead of loading the Second Stage Bootloader
(start.elf):
https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#differences-on-raspberry-pi-5
Fixes: 8b63d9a
("bcm27xx: add new bcm2712 subtarget")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-01 12:05:08 +01:00
Álvaro Fernández Rojas
1a5e51ab00
bcm27xx: base-files: fix platform_copy_config
...
Only bcm2708 and bcm2709 use "kernel.img" file name.
bcm2710 and bcm2711 use "kernel8.img" and bcm2712 uses "kernel_2712.img".
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-01 09:58:17 +01:00
Álvaro Fernández Rojas
96b03ff247
bcm27xx: improve image generation script
...
- Exit immediately on a non-zero status.
- Remove empty lines.
- Remove unused variables.
- Add missing ptgen variables for readability.
- Refactor SYNTAX if block.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-01 09:58:17 +01:00
Álvaro Fernández Rojas
a391760102
bcm27xx: base-files: properly detect boot partition
...
Automatically detect boot partition instead of forcing /dev/mmcblk0p1.
This way users can still get /boot mounted when booting from USB.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-01 09:58:17 +01:00
Álvaro Fernández Rojas
6d27032a37
bcm27xx: base-files: set_preinit_iface: add RPi 5
...
Add missing Rasoberry Pi 5 board_name to set_preinit_iface in order to get
ethernet working on failsafe mode.
Fixes: 8b63d9a
("bcm27xx: add new bcm2712 subtarget")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-01 09:58:11 +01:00
Álvaro Fernández Rojas
0b498c3c3f
bcm27xx: bcm2712: enable USB symbols and drop packages
...
This allows booting from USB.
Fixes: 8b63d9ac4a
("bcm27xx: add new bcm2712 subtarget")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-29 22:23:01 +01:00
Álvaro Fernández Rojas
476aaf057a
bcm27xx: refresh bcm2711 kernel config
...
Refresh outdated bcm2711 (RPi 4B) kernel config.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-28 01:11:02 +01:00
Álvaro Fernández Rojas
a1364fcd09
bcm27xx: switch to bcm27xx-utils
...
bcm27xx-userland is now deprecated and utils should be used instead.
96a7334ae9
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-26 12:29:30 +01:00
Marty Jones
8b63d9ac4a
bcm27xx: add new bcm2712 subtarget
...
This patch adds support for Raspberry Pi 5.
Instead of using 16K pages like Raspberry Pi OS, OpenWrt uses 4K pages due to
incompatibilities with F2FS and other applications.
There are multiple RPi forum posts with different cases and users are forcing
kernel8.img to workaround them, which is the 64 bit kernel of the RPi 4.
However, this isn't possible in OpenWrt because we only ship one kernel and we
would have to add RPi 5 support to bcm2711 subtarget (RPi 4) for that
workaround to work in OpenWrt.
Specification:
- Processor Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU,
with cryptographic extension, 512KB L2 caches per core, 2048KB L3 cache
Features:
- VideoCore VII GPU, supports OpenGL ES 3.1, Vulkan 1.2
- Dual 4Kp60 HDMI display output with HDR support 4Kp60 HEVC decoder
- LPDDR4X-4267 SDRAM 4GB and 8GB
- Dual-band 802.11ac Wi-Fi
- Bluetooth 5.0 / Bluetooth Low Energy
- microSD card slot, with support for SDR104 high-speed mode
- 2 x USB 3.0 ports
- 2 x USB 2.0 ports
- Gigabit Ethernet
- 2 x 4 lane MIPI camera/display
- PCIe 2.0 x1
- 5V/5A power via USB-C
- Raspberry Pi standard 40-pin header
- Real-time clock RTC
- Power button
Build system: x86_64
Build-tested: bcm2712
Run-tested: bcm2712/RPi5
Signed-off-by: Marty Jones <mj8263788@gmail.com>
[Remove device variant, improve description]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-25 17:46:46 +01:00
Marty Jones
2e715fb4fc
bcm27xx: update 6.1 patches to latest version
...
Add support for BCM2712 (Raspberry Pi 5).
3bb5880ab3
Patches were generated from the diff between linux kernel branch linux-6.1.y
and rpi-6.1.y from raspberry pi kernel source:
- git format-patch linux-6.1.y...rpi-6.1.y
Build system: x86_64
Build-tested: bcm2708, bcm2709, bcm2710, bcm2711
Run-tested: bcm2710/RPi3B, bcm2711/RPi4B
Signed-off-by: Marty Jones <mj8263788@gmail.com>
[Remove applied and reverted patches, squash patches and config commits]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-25 17:46:45 +01:00
Álvaro Fernández Rojas
09bc806229
bcm27xx: drop unneeded github workflow and readme patches
...
These patches can be dropped since we don't care about RPi's Github CI and
READMEs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-21 13:39:33 +01:00
John Audia
ff413129f9
kernel: bump 6.1 to 6.1.72
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.72
Manually rebased:
generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch
All other patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-01-19 21:24:44 +01:00
Álvaro Fernández Rojas
189838517e
bcm27xx: config: update documentation links
...
The documentation links have changed and are no longer valid.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-18 09:24:52 +01:00
Yangyu Chen
d549809c05
bcm27xx: 6.1: turn on cpu erratum for A72 and disable A53
...
The original configuration might be copied from bcm2710 which uses
cortex A53 rather than A72 in BCM2711, without errata might be harmful
to system stability and security.
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
2024-01-16 09:42:32 +01:00
Hauke Mehrtens
cb7068d5c5
bcm27xx: Remove unneeded kernel patch
...
This problem was fixed upstream in a different way, see:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-6.1.y&id=f434703fb893ddffcdbc1eec7646ce321e1190a8
Remove this now obsolete patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-01-16 09:18:09 +01:00
John Audia
f45fa6b45a
kernel: bump 6.1 to 6.1.71
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.71
Manually rebased:
gemini/patches-6.1/0002-usb-fotg210-Collect-pieces-of-dual-mode-controller.patch
All patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-01-06 12:52:49 +01:00
John Audia
131403d8aa
kernel: bump 6.1 to 6.1.70
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.70
All patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-01-02 18:28:58 +01:00