ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 06:08:08 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
25,202 Commits 9 Branches 74 Tags 903 MiB
8ff756cdc9
Commit Graph

56 Commits

Author SHA1 Message Date
Gabor Juhos
554772a665 kernel: update 3.10 to 3.10.12 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38000
 2013-09-15 16:00:41 +00:00
Gabor Juhos
d120ec18b2 kernel: update 3.10 to 3.10.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37890
 2013-09-02 19:12:54 +00:00
Gabor Juhos
968ed2e58a x86/alix2: remove kernel config for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37870
 2013-09-02 07:36:46 +00:00
Gabor Juhos
5aa70d283f x86/alix2: switch to 3.10.9 
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.

Russell says in the original patch:

"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built.  The patches
required no changes."

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37869
 2013-09-02 07:36:45 +00:00
Gabor Juhos
562e76d22c x86/alix2: add kernel config for 3.10 
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.

Russell says in the original patch:

"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built.  The patches
required no changes."

The current patch contains additional configuration tweaks.

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37868
 2013-09-02 07:36:44 +00:00
Gabor Juhos
77e00faa33 x86/alix2: add kmod-usb2-pci to default packages 
The USB controller is sitting on the PCI bus and
without the package the EHCI controller is not
usable.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37835
 2013-08-25 14:42:34 +00:00
Jonas Gorski
1beaf031d1 target: don't build jffs2 nor images by default 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
 2013-06-05 20:58:59 +00:00
Gabor Juhos
46225b99d9 kernel: update linux 3.8 to 3.8.13 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
 2013-05-26 16:02:31 +00:00
Gabor Juhos
e57c7d6c12 kernel: update linux 3.8 to 3.8.12 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36576
 2013-05-08 08:53:53 +00:00
Gabor Juhos
8a9fe26f20 kernel: update linux 3.8 to 3.8.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
 2013-05-01 22:15:18 +00:00
Gabor Juhos
f718179af5 kernel: update linux 3.8 to 3.8.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36493
 2013-04-30 10:43:59 +00:00
Gabor Juhos
36d4fd70bc kernel: update linux 3.8 to 3.8.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
 2013-04-26 16:55:42 +00:00
Steven Barth
4e8f7f37ed Change default IPv6 config to enable DHCPv6-PD 
SVN-Revision: 36384
 2013-04-22 19:40:16 +00:00
Gabor Juhos
151cadfe32 kernel: update linux 3.8 to 3.8.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36363
 2013-04-19 08:07:34 +00:00
Gabor Juhos
604395650a kernel: update linux 3.8 to 3.8.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36332
 2013-04-14 09:25:53 +00:00
Steven Barth
ea94d66b0f Adapt default network configuration for IPv6 
SVN-Revision: 36278
 2013-04-09 08:03:08 +00:00
Gabor Juhos
71a51e3b91 x86/alix2: remove old kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36253
 2013-04-07 15:53:11 +00:00
Gabor Juhos
15d311ec18 x86/alix2: switch to 3.8 
Tested on an alix2d13 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36252
 2013-04-07 15:53:09 +00:00
Gabor Juhos
9d05b1b683 x86/alix2: add config for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36251
 2013-04-07 15:53:08 +00:00
Hauke Mehrtens
45b24fa771 kernel: add some missing config options found by the buildbot. 
SVN-Revision: 35945
 2013-03-10 20:25:19 +00:00
Gabor Juhos
23b3b3a194 kernel: update linux 3.7 to 3.7.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35860
 2013-03-03 13:57:40 +00:00
Gabor Juhos
3f749d1e8e kernel: update linux 3.7 to 3.7.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35644
 2013-02-17 21:32:42 +00:00
Gabor Juhos
162b8e23a5 kernel: update linux 3.7 to 3.7.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
 2013-02-15 07:36:15 +00:00
Gabor Juhos
bae4bfe3f8 kernel: update linux 3.7 to 3.7.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
 2013-02-12 09:51:11 +00:00
Gabor Juhos
08ff976720 kernel: update linux 3.7 to 3.7.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
 2013-02-04 10:02:56 +00:00
Gabor Juhos
ab3e3cacaa alix2: convert from kernel version 3.3.8 to 3.7.5 
[juhosg: use 3.7.5 instead of 3.7.3]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35457
 2013-02-02 15:31:52 +00:00
Felix Fietkau
741f6ba7ef x86: fix typo in alix2/net5501 default packages 
SVN-Revision: 34972
 2013-01-02 16:09:23 +00:00
Gabor Juhos
07b5a3eea2 x86: remove support for old kernels 
SVN-Revision: 31804
 2012-05-18 20:10:42 +00:00
Gabor Juhos
604e3aac0a x86: remove subtarget specific LINUX_VERSION overrides 
SVN-Revision: 31803
 2012-05-18 20:10:38 +00:00
Gabor Juhos
eb2fe5e863 x86/alix2: switch to 3.3 
Compile tested only.

SVN-Revision: 31753
 2012-05-16 10:45:02 +00:00
Gabor Juhos
19f691f8e4 x86: sync 3.2 configs 
SVN-Revision: 31750
 2012-05-16 10:44:52 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
 2012-05-15 10:58:52 +00:00
Jonas Gorski
22b4e6b882 kernel: update linux 3.2 to 3.2.16 
SVN-Revision: 31459
 2012-04-24 09:25:35 +00:00
Jonas Gorski
d0bfc67e2e kernel: x86: also update subtarget kernel versions 
SVN-Revision: 31338
 2012-04-17 21:01:43 +00:00
Jo-Philipp Wich
884f964e62 alix2: add require crypto kmods (#10410) 
SVN-Revision: 30980
 2012-03-18 18:56:02 +00:00
Vasilis Tsiligiannis
834be6c1fe alix2, geos: Adjust CFLAGS 
Clone of CFLAGS change from r30013 into Geos and Alix platforms.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30353
 2012-02-07 13:00:47 +00:00
Jo-Philipp Wich
c433bfb571 disable additional PATA drivers in global 3.2 and 3.3 config, remove redundant symbols from alix2 config 
SVN-Revision: 30024
 2012-02-03 19:47:55 +00:00
Jo-Philipp Wich
7a36f3d2ff x86: move additional oddball PATA drivers These should only be enabled in the generic image, as they bloat all of the other targets. Also add symbols for NET5501, ALIX, and GEOS which were added backported to 3.2 and 3.3. Restore PC speaker to Geos target. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 30019
 2012-02-03 18:02:57 +00:00
Jo-Philipp Wich
7a9e4ffe8e alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility 
SVN-Revision: 30000
 2012-02-02 19:11:52 +00:00
Jo-Philipp Wich
bf8bb9b661 alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad 
SVN-Revision: 29999
 2012-02-02 19:06:22 +00:00
Jo-Philipp Wich
047ba1e12e alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest 
SVN-Revision: 29998
 2012-02-02 19:00:40 +00:00
Jo-Philipp Wich
3310df6b52 alix2: correct h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Drop obsolete CS5535 GPIO driver. 
[Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1804/]

SVN-Revision: 29981
 2012-02-01 15:31:23 +00:00
Jo-Philipp Wich
be49daffc8 base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli 
SVN-Revision: 28933
 2011-11-10 12:16:41 +00:00
Jo-Philipp Wich
d6f02b62d4 add timeserver config to target specific system configs as well 
SVN-Revision: 28750
 2011-11-04 12:53:35 +00:00
Daniel Dickinson
c0a625ffbf Add patch for linux-3.0 as well. 
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55

SVN-Revision: 28356
 2011-10-03 03:09:20 +00:00
Daniel Dickinson
541aa8e38e A lot of these options get set automatically when Geode is selected. 
Don't make the config more complicated than it needs to be.
Philip Prindeville - 2011-08-29 03:15:27

SVN-Revision: 28353
 2011-10-03 03:02:42 +00:00
Florian Fainelli
d2652dee9d update alix2 platform driver 
Add support for Ed Wildgoose's alix platform driver plus my
enhancement to add GPIO soft button support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 28081
 2011-08-25 09:35:45 +00:00
Daniel Dickinson
7ef004a144 Add packages that will be relant as "There's a new Alix platform driver hitting linux-next upstream. Get ready for it in 2.6.39.4 and 3.0. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>"

SVN-Revision: 27929
 2011-08-08 02:33:18 +00:00
Felix Fietkau
4da138d899 x86/alix2: include WAN interface by default 
Include WAN interface by default, instead of putting both ports in the LAN bridge.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27787
 2011-07-26 16:37:48 +00:00
Felix Fietkau
41db64f8e0 x86/alix2: fix typo in target makefile 
Cut and paste cruft from borrowing from Geos platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27786
 2011-07-26 16:37:44 +00:00