Commit Graph

14694 Commits

Author SHA1 Message Date
Felix Fietkau
8ddca59465 malta: use as a default type device
There is currently no relevant definition for developerboard device type
in include/target.mk, thus packages like iptables, firewall, dnsmasq
etc. are missing in the default images, rendering it almost useless
for regular testing or normal use.

With this change, currently a default set of packages for "router" will
be installed to malta firmware images.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 47325
2015-10-31 09:30:37 +00:00
Felix Fietkau
c5c2eb5fd6 malta: set CPU_TYPE:=24kc.
There are instructions (e.g. wsbh) only available in MIPS32R2 which is
the isa level used by many MIPS targets in OpenWrt.  As we use the malta
target mostly for development and testing purposes, setting the CPU_TYPE
to 24Kc will make the emulation more real.

The following is output from qemu-system-mipsel 2.3.0

    root@OpenWrt:/# cat /proc/cpuinfo  | grep 'cpu model\|isa'
    cpu model               : MIPS 24Kc V0.0  FPU V0.0
    isa                     : mips1 mips2 mips32r1 mips32r2

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 47324
2015-10-31 09:30:14 +00:00
Felix Fietkau
93efeef9b3 generic: fix unrecognized opcode wsbh when building for MIPS16.
The issue was found and reported by hynman [1] when compiling reaver for ar71xx
(Big Endian MIPS).

    {standard input}: Assembler messages:
    {standard input}:79: Error: unrecognized opcode `wsbh $2,$2'
    {standard input}:90: Error: unrecognized opcode `wsbh $3,$17'
    {standard input}:208: Error: unrecognized opcode `wsbh $2,$2'
    make[3]: *** [builder.o] Error 1

The patch was already in upstream since kernel release 4.3-rc5.

 [1] 1e29676a8a (commitcomment-12901931)

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 47322
2015-10-31 09:29:57 +00:00
Felix Fietkau
180713b89b ar71xx/image: remove old unused build code for TPLINK
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47321
2015-10-31 09:29:48 +00:00
Felix Fietkau
958c785868 ar71xx/image: remove old unused build code for TPLINKOLD
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47320
2015-10-31 09:29:38 +00:00
Felix Fietkau
24eb0d1ba1 ar71xx/image: migrate tl-wr841nd-v1.5 to new build step using squashfs+jffs2 instead of squashfs-only
All other tplink images use squashfs+jffs2. I don't see any reason why
this board should use squashfs-only

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47319
2015-10-31 09:29:25 +00:00
Felix Fietkau
ebea23b49f ar71xx/image: remove old unused build step TPLINK-64K
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47318
2015-10-31 09:29:18 +00:00
Felix Fietkau
c3350394a5 ar71xx/image: migrate tl-wdr6500-v2 to new image build steps
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47317
2015-10-31 09:29:09 +00:00
Felix Fietkau
1bd87413e6 ar71xx/image: refactor templates tplink-chn-v2
SVN-Revision: 47316
2015-10-31 09:29:01 +00:00
Felix Fietkau
153ed674b3 ar71xx/image: introduce TPLINK_HEADER_VERSION variable for tplink image
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47315
2015-10-31 09:28:50 +00:00
Felix Fietkau
ea23d796f6 oxnas: image: Remove custom mkfs targz override as base should be fine now
It was wrong anyway, missing file sort order parameter which was fixed
in base month ago.

Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 47314
2015-10-31 09:28:42 +00:00
Felix Fietkau
2e7df6312d kirkwood: image: Remove custom mkfs targz override as base should be fine now
It was wrong anyway, missing file sort order parameter which was fixed
in base month ago.

Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 47313
2015-10-31 09:28:34 +00:00
Felix Fietkau
f5683a0a86 imx6: image: Remove custom mkfs targz override as base should be fine now
It was wrong anyway, missing file sort order parameter which was fixed
in base month ago.

Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 47312
2015-10-31 09:28:25 +00:00
Felix Fietkau
74d9ef96f1 oxnas: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variable
Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 47310
2015-10-31 09:28:05 +00:00
Felix Fietkau
8a237d1f03 kirkwood: image: Refactor sanitize_profile_name using PROFILE_SANITIZED var
Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 47309
2015-10-31 09:27:56 +00:00
Felix Fietkau
e09d32dd96 imx6: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variable
Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 47308
2015-10-31 09:27:49 +00:00
Felix Fietkau
b100027a83 ramips: fix for kernel 4.0 napi repoll need return budgets number
Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47306
2015-10-30 22:32:49 +00:00
Felix Fietkau
9cd525a7fa x86/generic: enable radeon drm driver
This enables modesetting for radeon based boards.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 47305
2015-10-30 22:32:41 +00:00
Felix Fietkau
63f2b8afbf x86/generic: enable pata_atiixp driver
This enables booting from devices that use an ATI PATA controller for
the boot device, such as the embedded CF cards in Fujitsu-Siemens Futro
thin-clients.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 47304
2015-10-30 22:32:19 +00:00
Felix Fietkau
05d6b87cfb x86/generic: refresh subtarget kernel config
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 47303
2015-10-30 22:32:12 +00:00
Felix Fietkau
0365ce46df kernel: add some missing symbols for 4.3
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 47302
2015-10-30 22:32:04 +00:00
Felix Fietkau
61366c95e2 realview: Create ext4 image by default
Following the additions in r46924, enable the 'ext4' feature for
realview target so the ext4 image is created by default.

Signed-off-by: Dov Murik <dov.murik@gmail.com>

SVN-Revision: 47301
2015-10-30 22:31:47 +00:00
Felix Fietkau
65558ba722 kernel: backport some bcma header file definitions from wireless-testing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47284
2015-10-30 15:17:41 +00:00
Felix Fietkau
e2ebbfab40 kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47283
2015-10-30 15:17:34 +00:00
Rafał Miłecki
0a8196818d bcm53xx: add missing Netgear R8000 LEDs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47282
2015-10-30 14:44:06 +00:00
Rafał Miłecki
e6944a3490 bcm53xx: add workaround for Netgear R8000 network
According to the info from NVRAM we should use port 8 for the CPU (and
interface eth2). Unfortunately it doesn't work right now, so lets switch
to the port 5.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Forwardport of r46586 from 15.05

SVN-Revision: 47281
2015-10-30 12:55:37 +00:00
John Crispin
7fe0940c69 generic: fix adm6996 init
Kernel 3.14 added aditional genphy_soft_reset phy reset to phy_init_hw in drivers/net/phy/phy_device.c
Since adm6996 does in driver soft reset and doesn't use BMCR_RESET for soft reset
add dummy soft_reset callback to adm6996 driver, like it is done in ar8216.

This fixes ticket #20147

Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com>

SVN-Revision: 47272
2015-10-26 10:39:53 +00:00
John Crispin
c89fc7a75a kernel: Fix environment pointer setup in ar71xx/ath79
Observed on ar71xx/ath79 platforms such as Ubiquiti RouterStations.Reported in #20642.:
(https://dev.openwrt.org/ticket/20642).

If embedded command-line text exists with CONFIG_IMAGE_CMDLINE_HACK=y,firmware
init doesn't initialize environment pointer (fw_init_cmdline not called).

arcs_cmdline is not initialized before calling strlcat.

Signed-off-by: Ted Hess <thess@kitschensync.net>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 47270
2015-10-26 10:39:41 +00:00
John Crispin
c466a46a77 ar71xx: add support for TP-LINK TL-WR841N/ND v10
The TL-WR841N/ND v10 is mostly identical to the v9. Apart from some minor
changes, it contains a newer revision of the QCA9533 SoC and the CPU clock
is significantly higher.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 47263
2015-10-26 09:01:41 +00:00
John Crispin
c9426352ce ar71xx: fix ath79_soc_rev value for QCA9531 ver. 2
ath9k expects to get revision id 2 for the QCA9531 ver. 2 rev. 0. This
fixes the very low TX power on some devices like the TP-LINK
TL-WR841ND v10.

As ath79_soc_rev is only used to get the revision number to ath9k on the
QCA9533, just set it to the expected value on the ver. 2.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Tested-by: Felix Kaechele <felix@kaechele.ca>

SVN-Revision: 47262
2015-10-26 09:01:34 +00:00
John Crispin
632c92094a ar71xx: Bitmain Antminer S1/S3 set GPIO for USB Power
Antminers using the stock bootloader will not hash without this GPIO set.
Applies to DD and CC

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 47261
2015-10-26 09:01:28 +00:00
John Crispin
f080f2aa8e brcm2708: copy overlays README to boot partition
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47260
2015-10-26 09:01:21 +00:00
John Crispin
71ca5b1cc5 brcm2708: update modules
- Add support for DAC+ Pro.
- Add kmod-smi-bcm2835 and kmod-smi-bcm2835-dev modules.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47259
2015-10-26 09:01:12 +00:00
John Crispin
bf28fb50bf brcm2708: update 4.1 patches
As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47258
2015-10-26 09:01:05 +00:00
John Crispin
228eeb647e ramips: make the alsa driver register the codec
this allows using the codec even if it is not listed in the DTS

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47256
2015-10-26 09:00:42 +00:00
John Crispin
56dcd0fe90 rb532: prepare switch to 4.1
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 47255
2015-10-26 09:00:35 +00:00
Hauke Mehrtens
ff64ae8293 lantiq: add clk_round_rate()
This adds a basic implementation of clk_round_rate()
The clk_round_rate() function is called by multiple drivers and
subsystems now and the lantiq clk driver is supposed to export this,
but doesn't do so, this causes linking problems like this one:
ERROR: "clk_round_rate" [drivers/media/v4l2-core/videodev.ko] undefined!

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47254
2015-10-25 22:46:46 +00:00
Hauke Mehrtens
4fd9028f44 bcm53xx: add clk tree driver
These patches are written by Broadcom and will be in mainline Linux
kernel soon. I had some problems to get them backported to kernel 4.1,
so currently they are only available for 4.3.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47253
2015-10-25 22:46:08 +00:00
Hauke Mehrtens
da94b00df5 kernel: update kernel 4.1 to version 4.1.11
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.11

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47252
2015-10-25 17:32:01 +00:00
Hauke Mehrtens
fa4395db04 bcm53xx: add support basic for kernel 4.3
The files directory is now split up into the files which are needed for
every kernel version and the files only needed by kernel 4.1. The files
in files-4.1 are already merged into mainline kernel 4.3. This patch
only removed patches which were merged into mainline kernel 4.3.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47251
2015-10-25 16:43:14 +00:00
Hauke Mehrtens
6bc8640163 kernel: update kernel 4.3 to version 4.3-rc7
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47250
2015-10-25 16:13:34 +00:00
Hauke Mehrtens
e67b786afe bcm53xx: add missing patch from r47248 for USB 3.0
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47249
2015-10-23 22:38:07 +00:00
Hauke Mehrtens
aaa20ae2c2 bcm53xx: update USB 3.0 driver with version submitted upstream
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47248
2015-10-23 22:32:38 +00:00
Hauke Mehrtens
5682b0d954 bcm53xx: use Broadcom's proposed SMP implementation
This replaces our SMP implementation with a very similar version which
is Broadcom currently trying to get into mainline kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47247
2015-10-23 22:29:05 +00:00
Hauke Mehrtens
dc01c61664 bcm53xx: Add BCM SVK DT files
Add device tree files for Broadcom Northstar based SVKs.  Since the
bcm5301x.dtsi already exists, all that is necessary is the dts files to
enable the UARTs.  With these files, the SVKs are able to boot to shell.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47246
2015-10-23 22:26:49 +00:00
John Crispin
e043ada1d5 ramips: gpio-mt7621 was not handling irqs above 31 properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47238
2015-10-20 07:09:20 +00:00
John Crispin
fb152a810c ar71xx: Send power to USB port on WNR2200
This patch fixes ticket #15267 by enabling power on the
WNR2200's USB port. At present, the USB port on the WNR2200
is non-functional due to it not receiving power.

This patch defines an additional GPIO pin, but none of the
current GPIO definitions have been modified.

Signed-off-by: Riley Baird <BM-2cVqnDuYbAU5do2DfJTrN7ZbAJ246S4XiX@bitmessage.ch>

SVN-Revision: 47236
2015-10-19 18:18:12 +00:00
John Crispin
8d8a937272 ar71xx: Add Gainstrong MiniBox v1.0 support to trunk
This patch supersedes the v1 from September 17th.

Bumping the patch version - the MiniBox profile showed up under M, but
since it's called 'Gainstrong MiniBox v1.0' now it looks out of place.
Renamed the profile to gs-minibox-v1.mk to fix that.

The following patch adds support for the Gainstrong MiniBox into trunk
(or 'Designated Driver' :D ).

Fixed items:

- Inverted LED polarity (OOLITE seems to suffer from the same problem).
- Changed uppercase MINIBOX_V1_ prefix as requested.
- Prefixes are now gs_minibox_ similar to gs_oolite_ (same vendor).
- Mention the vendor (Gainstrong) in code headers.

Compiles fine, has been confirmed working by owners on 15.05.

Question: I've seen some boards use tools/firmware-utils/src/mktplinkfw.c,
the MiniBox images build fine without, so I'm wondering: do I need to add
it in there as well? Any added benefit?

Thank you

Signed-off by: Stijn Segers <francesco.borromini@inventati.org>

SVN-Revision: 47234
2015-10-19 17:55:25 +00:00
John Crispin
257e76a3df ar71xx: Bitmain Antminer S1 & S3 cleanup
Sets the LEDs to boardname:color:led-name
Sets the LAN to eth0
Other corrections such as the Machine Name and HWIDs
v2 corrects the profile names in the Makefile and changes tabs to spaces
in the Makefile 'define Device/' like the other devices.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 47221
2015-10-19 10:10:02 +00:00
John Crispin
024083a556 generic: add 8139cp fixes, enable hardware csum/tso on 4.0+
This contains two sets of fixes for the 8139cp driver.

For all kernel versions older than 4.3, we can apply the fixes from the
4.3-rc4 kernel. In particular, these fix the TX timeout recovery which
is causing my Geos to lock up until the hardware watchdog kicks in.

For 4.0 and later kernels, we can also apply the additional improvements
which are going into 4.4 to fix and enable hardware checksum/TSO
offload. Backporting those to older kernels is non-trivial.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 47220
2015-10-19 10:09:54 +00:00