Commit Graph

1021 Commits

Author SHA1 Message Date
Mikhail Zhilkin
0cb1dc0277 scripts: add support for Sercomm PID
This scripts creates Sercomm PID file. PID is necessary for the factory
images creation of variuos Sercomm-based devices (Beeline, Netgear,
Etisalat).

Size: 0x70
+-------+------+---------------+------------------+
| Start | Size | Value* (ASCII)| Description      |
+=======+======+===============+==================+
| 0x0   | 0x8  | 10100         | Hardware version |
+-------+------+---------------+------------------+
| 0x8   | 0x8  | 444245 (DBE)  | Hardware ID      |
+-------+------+---------------+------------------+
| 0x64  | 0x4  | 1002          | Software version |
+-------+------+---------------+------------------+
*for Beeline Smartbox GIGA

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
2022-07-03 20:25:38 +02:00
Mikhail Zhilkin
87092b3c06 scripts: add support for Sercomm kernel header
This scripts creates custom kernel header that necessary for Sercomm
mt7621 devices:
- Sercomm S3
- Beeline SmartBox Giga
- Beeline SmartBox Pro
- Beeline Smartbox Turbo
- Beeline Smartbox Turbo+
- WiFire S1500.NBN

Header format
-------------
+--------+---------------+------------------------+
| Offset | Value         | Description            |
+========+===============+========================+
| 0x0    | 53 65 72 00   | Magic "Ser."           |
+--------+---------------+------------------------+
| 0x4    | 04 00 00 01   | End offset of RootFS   |
+--------+---------------+------------------------+
|        |               | This header checksum   |
| 0x8    | d6 14 9a c1   | htonl(~crc)            |
+--------+---------------+------------------------+
| 0xc    | 02 ff ff ff   | Constant               |
+--------+---------------+------------------------+
| 0x10   | 00 01 40 00   | Kernel start offset    |
+--------+---------------+------------------------+
| 0x14   | c6 94 24 00   | Kernel length          |
+--------+---------------+------------------------+
|        |               | Kernel checksum        |
| 0x18   | e7 78 89 f1   | htonl(~crc)            |
+--------+---------------+------------------------+
| 0x1c   | 00 00 00 00   | Constant               |
+--------+---------------+------------------------+
| 0x20   | ff ff ff ff   | Constant               |
+--------+---------------+------------------------+
| 0x24   | ff ff ff ff   | Constant               |
+--------+---------------+------------------------+
| 0x28   | 00 00 00 01   | RootFS offset          |
+--------+---------------+------------------------+
|        |               | RootFS length          |
| 0x2c   | 04 00 00 00   | Always 0x4, we check   |
|        |               | UBI magic only         |
+--------+---------------+------------------------+
|        |               | RootFS checksum        |
| 0x30   | 1c fc 55 2d   | htonl(~crc)            |
|        |               | Const for UBI magic    |
+--------+---------------+------------------------+
| 0x34   | 00 00 00 00   | Constant               |
+--------+---------------+------------------------+
| 0x38   | ff ff ff ff … | Pad to 0x100           |
+--------+---------------+------------------------+

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
2022-07-03 20:25:38 +02:00
Luiz Angelo Daros de Luca
2fd66e058b scripts: add cameo image header generator
The cameo header is a 0x40-byte header used by D-Link DGS 1210 switches
and Apresia ApresiaLightGS series. cameo-imghdr.py is a clean-room
reimplementation of imghdr present in the DGS-1210-28-GPL package.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[fix board_version argument's help text]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-06-28 22:20:09 +02:00
Paul Spooren
7a73221332 build: use numeric-owner in ipkg-build
To create packages the `ipkg-build` script is used which double packs
`control.tar.gz` and `data.tar.gz` to a single package. By default it's
using a verbose username instead of a numeric value for files.

Official OpenWrt images (artifacts) are created within docker containers
which do not seem to contain those verbose usernames and instead
defaults to numeric values.

This becomes a problem when rebuilding public artifacts because other
build environments may offer verbose usernames and there the created
packages is different from the official ones.

With this commit `ipkg-build` always uses numeric values for user/group
and thereby making it easier to reproduce official artifacts.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-04-19 22:59:50 +02:00
Doug Kerr
6f692c9c49 scripts: format to black
clean up formatting with black using 80 character line limit

Signed-off-by: Doug Kerr <dek3rr@gmail.com>
2022-04-16 14:53:17 +02:00
Doug Kerr
0642a2166b scripts: use std library for jam crc32 calculation
CRC32 is available in a standard library. It seems reasonable
to defer to that rather than run a custom implementation.

Signed-off-by: Doug Kerr <dek3rr@gmail.com>
2022-04-16 14:53:17 +02:00
Daniel Golle
4d289ae7e6
scripts/gen_image_generic.sh: fix order of files in EFI bootfs
mtools recursive copy (mcopy -s ...) is using READDIR(3) to iterate
over the directory entries, hence they end up in the FAT filesystem in
traversal order which breaks reproducibility (rather than being added
to the FAT filesystem in a reproducible order). Implement recursive
copy in gen_image_generic.sh in Shell code instead, as in that way we
can force files to be copied in reproducible order.

Fixes: aece8f5ae8 ("scripts/gen_image_generic.sh: generate reproducible EFI filesystem")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-15 01:17:04 +01:00
Daniel Golle
aece8f5ae8
scripts/gen_image_generic.sh: generate reproducible EFI filesystem
Generate FAT filesystem for EFI boot in a reproducible way:
 * use '--invariant' option of mkfs.fat
 * set timestamps of all files to SOURCE_DATE_EPOCH
 * make sure files are ordered locale-independent

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-11 15:29:33 +01:00
Daniel Golle
1d77dca3b3
scripts: make sure sort-order is independent from locale
Set LC_ALL=C environment variable when calling 'sort' as the sort
order otherwise depends on the locale set.

Fixes: 56ce110b73 ("scripts: make sure conffiles are sorted")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-06 17:33:31 +01:00
Paul Spooren
56ce110b73 scripts: make sure conffiles are sorted
It may happen that conffiles are in different order on different builds.
Make sure they have the same order by sorting them.

FIX: #9612

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-04-01 13:08:58 +01:00
Paul Spooren
8822a8d850 build: store sha256_unsigned in JSON
Introduce `sha256_unsigned` which is a checksum of the image _before_ a
signature is attached. This is helpful to compare image reproducibility.

Since the `.sha256sum` file is located in the $(KDIR) folder, switch
$(BIN_DIR) with $(KDIR) to simplify the code. The value of $(BIN_DIR)
itself is not stored inside the resulting JSON file, so it can be
replaced.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-03-29 21:41:06 +01:00
Daniel Golle
068ea2cde0
scripts/gen_image_generic.sh: make ext4 bootfs reproducible
Set fixed timestamp for kernel other files in /boot filesystem.
This should help making x86 *combined* images reproducible.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-28 20:52:37 +01:00
Daniel Golle
e89c85249e scripts/mkits.sh: replace forgotten '-' with ${REFERENCE_CHAR}
Cosmetical change to improve style in mkits.sh.

Fixes: fd67908647 ("scripts: mkits.sh: Allow legacy @ mode for dts creation")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-24 00:46:45 +00:00
Rui Salvaterra
6b822189b1 toolchain: binutils: add support for version 2.38
While at it, also fix the download.xs4all.nl and add ftp.gnu.org to the GNU
mirrors, as it seems to be updated faster.

Deleted (upstreamed):
600-Close_the_file_descriptor.patch [1]

[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=5a98fb7513b559e20dfebdbaa2a471afda3b4742

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2022-03-09 10:23:25 +00:00
Georgi Valkov
1324403eb6 mkhash: fix build errors on FreeBSD 13.0
be64enc, be16dec, and be32dec are declared on FreeBSD 13.0, in
/usr/include/sys/endian.h so we should not declare them.

Fixes the following error during feeds update:
staging_dir/host/bin/mkhash: No such file or directory

gcc scripts/mkhash.c
scripts/mkhash.c:111:1: error: redefinition of 'be64enc'
  111 | be64enc(void *buf, uint64_t u)

Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
2022-03-05 18:01:04 +01:00
Petr Štetiar
57f7a86c68 check-toolchain-clean.sh: workaround stray rebuilds
It seems, that there are currently some unhandled corner cases in which
`.toolchain_build_ver` results in empty file and thus forcing rebuilds,
even if the toolchain was build correctly just a few moments ago. Until
proper fix is found, workaround that by checking for this corner case
and simply populate `.toolchain_build_ver` file.

While at it, improve the UX and display version mismatch, so it's more
clear what has forced the rebuild:

 "Toolchain build version changed (11.2.0-1 != ), running make targetclean"

References: https://gitlab.com/ynezz/openwrt/-/jobs/2133332533/raw
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-02-28 15:17:11 +01:00
Petr Štetiar
9116096c0f check-toolchain-clean.sh: fix shellcheck warnings
Fixes following complaints and suggestions:

 In scripts/check-toolchain-clean.sh line 2:
 eval `grep CONFIG_GCC_VERSION .config`
      ^-- SC2046 (warning): Quote this to prevent word splitting.
      ^-- SC2006 (style): Use $(...) notation instead of legacy backticks `...`.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-02-28 15:17:11 +01:00
Eneas U de Queiroz
65c28d7a67 scripts/diffconfig.sh: ensure config/conf is built
diffconfig.sh runs ./scripts/config/conf, but it does not get built
with 'make {menu,x,n}config.  Call 'make ./scripts/config/conf' to
ensure it's been built before running it, aborting in case of failure.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>[removed Fixes: due revert]
2022-02-26 13:36:30 +01:00
Petr Štetiar
d6119e2f38 Revert "scripts/diffconfig.sh: ensure config/conf is built"
This reverts commit c0849c1d9c as it seems
to introduce regression in config.buildinfo files produced at least by
buildbots:

 $ curl -s https://downloads.openwrt.org/snapshots/targets/ath79/generic/config.buildinfo | head -2
 make[3]: Entering directory '/builder/shared-workdir/build'
 make[3]: Leaving directory '/builder/shared-workdir/build'

References: https://github.com/openwrt/openwrt/issues/9297#issuecomment-1049719381
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-02-24 11:44:00 +01:00
Eneas U de Queiroz
c0849c1d9c scripts/diffconfig.sh: ensure config/conf is built
diffconfig.sh runs ./scripts/config/conf, but it does not get built
with 'make {menu,x,n}config.  Call 'make ./scripts/config/conf' to
ensure it's been built befpre running it.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2022-02-22 16:37:23 +01:00
Eneas U de Queiroz
009293c52e build: scripts/config - update to kconfig-v5.14
Functional Changes
---------- -------
- make 'imply' not impose any restrictions: allow symbols implied by y
  to become m
- change "modules" from sub-option to first-level attribute

Bugfixes
--------
- nconf: fix core dump when searching in empty menu
- nconf: stop endless search loops
- xconfig: fix content of the main widget
- xconfig: fix support for the split view mode

Other Changes
----- -------
- highlight xconfig 'comment' lines with '***'
- xconfig: navigate menus on hyperlinks
- xconfig: drop support for Qt4
- improve host ncurses detection

Update the 'option modules' usage to just 'modules' in Config.in.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2022-02-19 13:10:01 +01:00
Paul Spooren
7fae1e5677 feeds: use git-src-full to allow Git versioning
Both $(AUTORELEASE) and $(PKG_SRC_VERSION) (from luci.git) use the Git
log to determine releases and package timestamps.

Feeds are shallow cloned by default, resulting in an incomplete Git log
and therefore different local package versions than offered upstream.

This commits sets the default feeds to use `src-git-full` to solve that.

Add fixes from "2b1d92f: scripts/feeds: silence git warning by selecting
pull style" to `src-git-full`

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-02-15 00:24:24 +01:00
Paul Spooren
2120cad38d build: store source_date_epoch as integer
The value is retreived from a env variable which defaults to be read as
a string. However the SOURCE_DATE_EPOCH is a unix timestamp aka integer.

Fix this to allow downstream tools to parse the value directly.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-02-14 14:40:34 +01:00
Felix Fietkau
ebc36ebb23 scripts/feeds: install targets to target/linux/feeds and support overriding
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-01-24 13:29:05 +01:00
Felix Fietkau
0bdf8d1206 scripts/feeds: fix installing targets without explicitly specifying the feed
Add similar code to what is done on packages

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-01-24 13:29:05 +01:00
Ansuel Smith
88204bfa82 treewide: drop use of which
Ubuntu started to flag which as deprecated and it
seems which is not really standard and may vary
across Distro.
Drop the use of which and use the standard 'command -v'
for this simple task.
Which is still present in the prereq if some package/script
still use which.
A utility script called command_all.sh is implemented that
will just mimic the output of which -a.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-01-17 09:14:26 +01:00
Paul Spooren
02de391b08 scripts: dump-target-info print kernel versions
This commits adds the ability to print Kernel versions of all
targets/subtargets. If a testing Kernel is set print that version as
well.

Example output:

    apm821xx/nand 5.10
    apm821xx/sata 5.10
    arc770/generic 5.4
    archs38/generic 5.4
    armvirt/32 5.10
    armvirt/64 5.10
    at91/sam9x 5.10
    at91/sama5 5.10
    ath25/generic 5.4
    ath79/generic 5.4 5.10
    ath79/mikrotik 5.4 5.10
    --- %< ---

This should help to get a quick update on the state of Kernels.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-12-29 14:06:10 +01:00
Enrico Mioso
57c1f3f9c5
base-files: add eMMC sysupgrade support
Adds generic support for sysupgrading on eMMC-based devices.

Provide function emmc_do_upgrade and emmc_copy_config to be used in
/lib/upgrade/platform.sh instead of redundantly implementing the same
logic over and over again.
Similar to generic sysupgrade on NAND, use environment variables
CI_KERNPART, CI_ROOTPART and newly introduce CI_DATAPART to indicate
GPT partition names to be used. On devices with more than one MMC
block device, CI_ROOTDEV can be used to specify the MMC device for
partition name lookups.

Also allow to select block devices directly using EMMC_KERN_DEV,
EMMC_ROOT_DEV and EMMC_DATA_DEV, as using GPT partition names is not
always an option (e.g. when forced to use MBR).

To easily handle writing kernel and rootfs make use of sysupgrade.tar
format convention which is also already used for generic NAND support.

Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
CC: Li Zhang <li.zhang@gl-inet.com>
CC: TruongSinh Tran-Nguyen <i@truongsinh.pro>
2021-12-02 20:42:58 +00:00
Robert Marko
5a305e429f scripts: ubinize-image: make rootfs optional
Currently ubinize-image script always expects the
rootfs image to be passed and a volume for it created.

So, to allow only ubinizing a kernel for example which
the MikroTik hAP ac3 and other new NAND devices from
MikroTik require make rootfs an optional parameter like
kernel.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2021-11-28 17:17:22 +01:00
Felix Fietkau
db34b93331 toolchain: add a version that can be bumped to force toolchain/target rebuild
This can be used to ensure that the compiled code is up to date, when
something important changes in the toolchain.
A recent example of this is the gcc 11 fix for a code miscompilation issue

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-16 22:02:45 +01:00
Arne Zachlod
b5ab6d0bc5 scripts/env: fix env for git conf init.defaultBranch not set to "master"
Since version 2.28, git has a config option init.defaultBranch to set the name
of the first branch created with git init. The env script expects this name to
be "master". This commit sets the initial branch name to "master"
instead of using the git configured one.

Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
2021-11-13 10:29:41 -10:00
Josh Soref
08622de7d6 scripts: fix various typos
This only affects typos in comments or user-facing output.

Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
[only picks changes to scripts, drop "commandline" replacement,
 fix case for "arbitrary", improve commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-31 21:24:47 +01:00
Jan-Niklas Burfeind
88a2ea41da scripts: eva_ramboot.py: remove unused import
concludes:
commit e7bc8984d9 ("scripts: make eva_ramboot.py offset configurable")

Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
2021-10-30 15:00:22 +02:00
Daniel Golle
b2aca61360
base-files, metadata: support additional group membership
Some packages may require additional group membership for the system
user added by that package. Allow defining additional groups as third
member of the ':'-separated tuple, allowing to specify multiple
','-separated groups with optional GID.

Example:
USERID:=foouser=1000:foogroup=1000:addg1=1001,addg2=1002,addg3

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-10-28 16:27:21 +01:00
Hans Dedecker
abc7a97e9c Revert "ethtool: update to v5.14"
This reverts commit 7630001427

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2021-10-23 21:39:00 +02:00
Hans Dedecker
7630001427 ethtool: update to v5.14
Update to newly released version 5.14

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2021-10-23 21:35:38 +02:00
Felix Fietkau
b45ff2d023 scripts/rstrip.sh: do not strip .o files with STRIP_KMOD
Fixes packaging of eBPF modules

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-11 11:49:14 +02:00
Paul Spooren
3128dfc18a scripts: package-metadata add pkgmanifestjson call
The new `pkgmanifestjson` call prints all package manifest of a feed in
JSON format. This function can be used to print an overview of packages
information used for downstream tooling.

The script is entirely based on Petrs work on dependency visualisation.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-09-23 21:57:22 -10:00
Paul Spooren
108901fffb scripts: store maintainer in package metadata
The maintainer could be usable for downstream tooling, so start storing
it in the metadata.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-09-23 21:38:59 -10:00
Damien Mascord
fd67908647 scripts: mkits.sh: Allow legacy @ mode for dts creation
commit 5ec60cbe9d ("scripts: mkits.sh: replace @ with - in nodes")
broke support for Meraki MR32 and this patch makes the replacement
configurable allowing for specifying the @ or - or whatever character
that is desired to retain backwards compatibility with existing devices.

For example, this patch includes the fix for the Meraki MR32 in
target/linux/bcm53xx/image for meraki_mr32:

  DEVICE_DTS_DELIMITER := @
  DEVICE_DTS_CONFIG := config@1

Fixes: 5ec60cbe9d ("scripts: mkits.sh: replace @ with - in nodes")
Signed-off-by: Damien Mascord <tusker@tusker.org>
[Added tags, checkpatch.pl fixes, noted that this is for old stuff]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-09-23 20:49:32 +02:00
Ansuel Smith
93f488fc37 scripts: handle gcc and linux in dl_cleanup script
Handle gcc and linux with a special regex that set their progname with
their major version. This way every minor version can be cleared. The
build cleanup logic can be tweaked later to clean the entire toolchain
and target dir with a different gcc version.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[reformat commit message]
Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-09-22 22:24:39 -10:00
Ansuel Smith
ff875876da scripts: format dl_cleanup to black format python style
Forma dl_cleanup python script to black style.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-09-22 19:54:00 -10:00
Ansuel Smith
4eb4c3c469 scripts: add missing regex for dl_cleanup script
Regex xxx-YYYY-MM-DD-GIT_SHASUM was missing. Add the new regex to improve
and better find outdated package. This also fix a bug where some bug were
incorrectly detected as packagename-yyyy-mm-dd instead of packagename due
to them be parsed by the wrong parser

Example:

    openwrt-keyring-2021-02-20-49283916.tar.xz

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[added example in commit message]
Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-09-22 19:51:44 -10:00
Paul Spooren
5ef4608c02 build: store artifacts in JSON
Multiple profiles create artifacts, these should be stored in the JSON
file as well, allowing downstream tooling to show those files, too.

Artifacts don't have specific filesystems so only the fields `name`,
`type` and `sha256` are available.

Rename env variable names from IMAGE_ to FILE_ prefixes to reflect that
images, kernels and artifacts are added with the same command.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-09-14 10:42:38 -10:00
Daniel Golle
98bccdafd7
base-files: rename 'sdcard' to 'legacy-sdcard'
While an image layout based on MBR and 'bootfs' partition may be easy
to understand for users who are very used to the IBM PC and always have
the option to access the SD card outside of the device (and hence don't
really depend on other recovery methods or dual-boot), in my opinion
it's a dead end for many desirable features on embedded systems,
especially when managed remotely (and hence without an easy option to
access the SD card using another device in case things go wrong, for
example).

Let me explain:

* using a MSDOS/VFAT filesystem to store kernel(s) is problematic, as a
  single corruption of the bootfs can render the system into a state
  that it no longer boots at all. This makes dual-boot useless, or at
  least very tedious to setup with then 2 independent boot partitions
  to avoid the single point of failure on a "hot" block (the FAT index
  of the boot partition, written every time a file is changed in
  bootfs). And well: most targets even store the bootloader environment
  in a file in that very same FAT filesystem, hence it cannot be used
  to script a reliable dual-boot method (as loading the environment
  itself will already fail if the filesystem is corrupted).

* loading the kernel uImage from bootfs and using rootfs inside an
  additional partition means the bootloader can only validate the
  kernel -- if rootfs is broken or corrupted, this can lead to a reboot
  loop, which is often a quite costly thing to happen in terms of
  hardware lifetime.

* imitating MBR-boot behavior with a FAT-formatted bootfs partition
  (like IBM PC in the 80s and 90s) is just one of many choices on
  embedded targets. There are much better options with modern U-Boot
  (which is what we use and build from source for all targets booting
  off SD cards), see examples in mediatek/mt7622 and mediatek/mt7623.

Hence rename the 'sdcard' feature to 'legacy-sdcard', and prefix
functions with 'legacy_sdcard_' instead of 'sdcard_'.

Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-16 12:22:17 +01:00
Stijn Tintel
8347d8b4fb base-files: add generic sdcard upgrade method
Add a generic sdcard upgrade method instead of duplicating code in yet
another target, and add a feature flag to only install this upgrade
method in targets that set this flag. Copied from mvebu.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-08-07 01:34:40 +03:00
Stijn Tintel
84c9570aaa scripts/target-metadata.pl: order features alphabetically
We generaly do this in many other places, so let's do it here also.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-08-07 01:30:37 +03:00
Yonghyu Ban
7270d768da scripts/mkits.sh: Fix the hash algorithm paramter
The mkits.sh script help message states hash algorithm can be
specified using the -H command-line option, but it does not work
currently due to a bug in the script.

This patch fixes this problem by changing the option from -S to
-H and specify getopts parameter after it

Signed-off-by: Yonghyu Ban <yonghyu@empo.im>
2021-07-18 19:37:30 +01:00
Ansuel Smith
64ce35bfaf scripts: check if dl directory exist in dl_cleanup script
Check if the provided dl directory exist and return on error.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-07-05 14:15:58 -10:00
Paul Spooren
fd0d9909bf build,json: fix generation with empty profiles
If the image generation doesn't add any profiles to the output the
*profile merge* will fail. To avoid that set an empty profile as
fallback.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-06-20 22:42:29 -10:00
Moritz Warning
a463b96241 build: preserve profiles.json between builds
Keep other profiles.json content if the data belongs to the current
build version.

Also useful for the ImageBuilder, which builds for a single model each
time. Without this commit the profiles.json would only contain the
latest build profile information.

Signed-off-by: Moritz Warning <moritzwarning@web.de>
[improve commit message]
Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-06-16 21:28:53 -10:00
Karel Kočí
1aa80ce393 scripts/feeds: generate index after all feeds are updated
This separates index update from feed update. The result is that all
requested feeds are first updated and only then indexed.

The reason for this change is to prevent errors being reported and
potentially invalid index being generated thanks to cross feeds
dependency.
The feeds script pulls in default all feeds as they come and on install
prefers packages from first feeds (unless special feed is requested).
Thus order of feeds in some way specifies preferences. This is handy for
downstream distributions as they can simply override any package from
upstream feeds by placing their feed before them. This removes need to
patch or fork upstream feeds.
The problem is that such feed most likely depends in some way also on
subsequent feeds. The most likely feeds are 'packages' or 'luci'. The
example would be Python package that needs 'python.mk' from 'packages'
feed. Ordering custom feed after dependent feeds is sometimes just not
possible because of preference requirement described before.
The solution is to just first pull all feeds and generate indexes only
after that. In the end this ensures that index is generated correctly at
first try without any error.

In terms of code this removes 'perform_update' argument from
'update_feed' as with index update removal the update is the only action
performed in that subroutine. Thus this moves condition to 'update'
subroutine.

Signed-off-by: Karel Kočí <karel.koci@nic.cz>
2021-06-07 12:44:50 -10:00
Paul Spooren
ec4852f731 scripts: config.guess: update to 2021-05-24
This script hasn't seen an update in multiple years, update it to the
latest version provided upstream. Both `config.guess` and `config.sub`
are copied from upstream[1] and not modified.

The full changelog is available within the upstream repository[1].

[1]: https://git.savannah.gnu.org/git/config.git

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-05-29 13:03:07 +02:00
Leonardo Mörlein
b993b68b6c build: introduce $(MKHASH)
Before this commit, it was assumed that mkhash is in the PATH. While
this was fine for the normal build workflow, this led to some issues if

    make TOPDIR="$(pwd)" -C "$pkgdir" compile

was called manually. In most of the cases, I just saw warnings like this:

    make: Entering directory '/home/.../package/gluon-status-page'
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    [...]

While these were only warnings and the package still compiled sucessfully,
I also observed that some package even fail to build because of this.

After applying this commit, the variable $(MKHASH) is introduced. This
variable points to $(STAGING_DIR_HOST)/bin/mkhash, which is always the
correct path.

Signed-off-by: Leonardo Mörlein <me@irrelefant.net>
2021-05-13 15:13:15 +02:00
Paul Spooren
7880a64848 build,json: 3rd fixup of default_packages
This became a bit of a tragedy, caused by a corner cases which wasn't
put into account during testing. DEFAULT_PACKAGES are defined in
target/linux/<target>/Makefile but also in
target/linux/<target>/<subtarget>/target.mk.

The latter was no longer imported when using DUMP=1, however not using
DUMP=1 while running the Makefile in target/linux/<target>/ caused duplicate
packages in the list.

As a solution, which should have been used from day 0, `make` runs in
target/linux/ without DUMP=1, resulting in no duplicate packages and all
inclusions from include/target.mk, linux/target/<target>/{Makefile,
<subtarget>/target.mk}

While at it, sort the list of default packages.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-03-25 10:25:54 -10:00
Paul Spooren
b36068d35d build,json: fixup fixup of arch_packages
The commit "1bf2b3fe90 build,json: fixup missing arch_packages" fixes
the missing package architecture locally but runs $(TOPDIR)/Makefile
rather than a target specific one. While this works on local builds just
fine, it causes the buildbots to add garbage to the `arch_packages`
variable:

    cd \"/builder/shared-workdir/build\"; git log --format=%h -1
    toolchain > /builder/shared-workdir/build/tmp/.ver_check\ncmp -s
    /builder/shared-workdir/build/tmp/.ver_check
    /builder/shared-workdir/build/staging_dir/toolchain-x86_64_gcc-8.4.0_musl/stamp/.ver_check
    || { \\\n\trm -rf
    /builder/shared-workdir/build/build_dir/target-x86_64_musl
    /builder/shared-workdir/build/staging_dir/target-x86_64_musl
    /builder/shared-workdir/build/staging_dir/toolchain-x86_64_gcc-8.4.0_musl
    /builder/shared-workdir/build/build_dir/toolchain-x86_64_gcc-8.4.0_musl;
    \\\n\tmkdir -p
    /builder/shared-workdir/build/staging_dir/toolchain-x86_64_gcc-8.4.0_musl/stamp;
    \\\n\tmv /builder/shared-workdir/build/tmp/.ver_check
    /builder/shared-workdir/build/staging_dir/toolchain-x86_64_gcc-8.4.0_musl/stamp/.ver_check;
    \\\n}\nx86_64

Only the last line contains the desired string.

Future investigation should check why the build system prints this to
stdout rather than stderr.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-03-24 19:03:24 -10:00
Paul Spooren
1bf2b3fe90 build,json: fixup missing arch_packages
Fix 7f4c2b1 "build,json: fix duplicates in default_packages" which
removed duplicate default packages but also removed the package
architecture from the profiles.json.

If DUMP=1 is set, the `ARCH_PACKAGES` is no longer exported and
therefore empty. Fix this by running make twice, once with DUMP=1 and
once without.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-03-24 13:41:34 -10:00
Paul Spooren
7f4c2b1a4f build,json: fix duplicates in default_packages
Calling without the DUMP=1 argument causes the target specific Makefile
to be "included" again which adds the target specific packages twice,
once on the actual run and once included from `include/target.mk`.

This led to duplicate package entries, causing confusion in downstream
projects using the generated JSON files.

While at it, apply `black` style to Python script.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-03-20 23:58:52 -10:00
Daniel Golle
6890f6fe13 include/image*: add support for device-tree overlays
Add new target feature 'dt-overlay' which makes DTC keep the symbol
names in the generated dtb.
Make sure additional DT overlay sources specified by the new device
variable DEVICE_DTS_OVERLAY get compiled together with the main DTS
(currently overlays got to be in the same folder). Let Build/fit pass
the generated DT overlay blobs to mkits.sh.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-17 17:45:34 +00:00
Daniel Golle
4e6de4f093 scripts/mkits.sh: add support for adding DT overlay blobs to image
Allow adding multiple device tree overlay blobs to an image and
generate configurations for each of them.
This is useful on boards with modern U-Boot which allow e.g. user-
configurable peripherals ("shields") in that way.
Note that currently, each generated configuration adds exactly one
overlay on top of the base image, ie. adding multiple overlays at the
same time is not yet supported.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-17 17:41:24 +00:00
Paul Spooren
bb95be9265 scripts,ipkg-build: use realpath for pkg_dir
This allows manual execution of the ipkg-build script even with
releative path.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-03-14 19:32:30 -10:00
Paul Spooren
72f481b157 scripts,ipkg-build: apply shellcheck
This commit cleans the `ipkg-build` script via changes suggested by
shellcheck. These are mostly word splitting issues.

Remove the definition of GZIP, this adds three "lookups" of the `gzip`
binary but the rest of the build system doesn't seem to use such
improvements neither.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-03-14 19:31:43 -10:00
Robert Marko
5ec60cbe9d scripts: mkits.sh: replace @ with - in nodes
U-boot will reject the nodes with @ for the address since
commit:
79af75f777

This in turn will cause the failure to boot with OpenWrt
generated images.

So, to rectify that simply replace @ with -.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cover also newly added rootfs@1 and initrd@1 nodes)
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2021-03-05 15:45:33 +00:00
Daniel Golle
ebcb4f1d0a
treewide: fix spelling 'seperate' -> 'separate'
This popular spelling mistake was also introduced by myself lately.
Fix it everywhere.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-28 23:59:21 +00:00
David Bauer
9a9cf40dd9 download: add mirror alias for Debian
Add an alias for Debian packages and download them from the Debian
mirror redirector.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-26 20:41:00 +01:00
David Bauer
01c01d9861 download: use mirror redirector for GNOME downloads
Use the GNOME mirror redirector as the primary download source for GNOME
packages.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-26 20:41:00 +01:00
Adrian Schmutzler
ef2cb8572b treewide: rename IMAGE_PREFIX/IMAGE_NAME to DEVICE_IMG_*
We so far had two variables IMG_PREFIX and IMAGE_PREFIX with
different content. Since these names are obviously quite
confusing, this patch renames the latter to DEVICE_IMG_PREFIX,
as it's a device-dependent variable, while IMG_PREFIX is only
(sub)target-dependent.

For consistency, also rename IMAGE_NAME to DEVICE_IMG_NAME, as
that's a device-dependent variable as well.

Cc: Paul Spooren <mail@aparcar.org>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-25 18:11:06 +01:00
Daniel Golle
330bd380e8 image: allow building FIT and uImage with ramdisk
Instead of embedding the initrd cpio archive into the kernel, allow
for having an external ramdisk added to the FIT or uImage.
This is useful to overcome kernel size limitations present in many
stock bootloaders, as the ramdisk is then loaded seperately and doesn't
add to the kernel size. Hence we can have larger ramdisks to host ie.
installers with all binaries to flash included (or a web-based
firmware selector).
In terms of performance and total size the differences are neglectible.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-24 01:35:20 +00:00
Daniel Golle
e6aac8d98f image: add support for building FIT image with filesystem
Allow for single (external-data) FIT image to hold kernel, dtb and
squashfs. In that way, the bootloader verifies the system integrity
including the rootfs, because what's the point of checking that the
hash of the kernel is correct if it won't boot in case of squashfs
being corrupted? Better allow bootloader to check everything needed
to make it at least up to failsafe mode. As a positive side effect
this change also makes the sysupgrade process on nand potentially
much easier as it is now.
In short: mkimage has a parameter '-E' which allows generating FIT
images with 'external' data rather than embedding the data into the
device-tree blob itself. In this way, the FIT structure itself remains
small and can be parsed easily (rather than having to page around
megabytes of image content). This patch makes use of that and adds
support for adding sub-images of type 'filesystem' which are used to
store the squashfs. Now U-Boot can verify the whole OS and the new
partition parsers added in the Linux kernel can detect the filesystem
sub-images, create partitions for them, and select the active rootfs
volume based on the configuration in FIT (passing configuration via
device tree could be implemented easily at a later stage).

This new FIT partition parser works for NOR flash (on top of mtdblock),
NAND flash (on top of ubiblock) as well as classic block devices
(ie. eMMC, SDcard, SATA, NVME, ...).
It could even be used to mount such FIT images via `losetup -P` on a
user PC if this patch gets included in Linux upstream one day ;)

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-24 01:35:20 +00:00
David Bauer
f04e007491 download: remove broken mirrors
These mirrors don't exist anymore. Remove them.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-22 00:57:04 +01:00
Felix Fietkau
075fa4cd9a Mostly revert "build: add support for fixing up library soname"
This reverts commit b12288fa69.
The patchelf approach is too fragile, and the only users of this have been
converted to make patching unnecessary
Leave the abi_version_str variable in place in rules.mk

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-02-15 18:47:21 +01:00
Felix Fietkau
c921650382 build: drop ABI version from metadata
Preparation for supporting dynamic ABI versions that depend on the runtime
configuration. Read the suffix from the staging dir pkginfo version files.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-02-14 19:41:52 +01:00
Felix Fietkau
b12288fa69 build: add support for fixing up library soname
This makes it possible to declare a package ABI_VERSION independent from the
upstream soname by setting PKG_ABI_VERSION in the package makefile.
The library filename is fixed up for files installed to packages and to the
staging dir. References to the original from executables within the same
package are also fixed up

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-02-14 19:41:51 +01:00
Paul Spooren
6d5425976f scripts: fix checkpatch.pl for changed license dir
As multiple LICENSES are shipped and no longer just LICENSE, modify the
OpenWrt tree detection in checkpatch.pl.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-02-14 19:21:38 +01:00
Paul Spooren
8286f3a3d3 treewide: unify OpenWrt hosted source via @OPENWRT
Multiple sources are hosted on OpenWrts source server only. The source
URLs to point to the server vary based on different epochs in OpenWrts
history.

Replace all by @OPENWRT which is an "empty" mirror, therefore using the
fallback servers sources.cdn.openwrt.org and sources.openwrt.org.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-02-05 12:00:24 -10:00
Paul Spooren
7521aedff4 scripts: sources CDN as fallback in download.pl
In case the default sources for a package fail use the CDN rather than
our own mirror. In case the CDN fails, fallback to our mirror.

Also remove mirror1 which isn't available anymore.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-01-27 22:46:08 -10:00
Paul Spooren
4dad324429 scripts: target-metadata don't add PROFILES twice
Since 4ee3cf2b5a profiles with alternative vendor names may appear
multiple times in `tmp/.targetinfo` or `.targetinfo` (for
ImageBuilders).

The `target-metadata.pl` script adds these profiles then twice to
`PROFILE_NAMES` and the ImageBuilder show the profile twice when running
`make info`.

This patch removes duplicate profile IDs and only adds them once to
`.profiles.mk`.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-01-14 22:42:21 -10:00
Paul Spooren
a323a653f0 scripts/feed: no warn on toolchain/linux overwrite
The recent 7f285d "scripts/feeds: warn when skipping core package
override" floods SDK output with warning of overwriting "linux" and
"toolchain" core packages. This should be ignored as these are not
regular packages added via feeds.

While at it slightly improve the warning string.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-01-06 14:04:34 -10:00
Kevin Darbyshire-Bryant
e2180e3cbe build: drop clang wrapper
clang's gcc emulation does the right thing with -print-file-name now,
drop the wrapper

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-01-05 08:59:59 +00:00
Paul Spooren
1b002434f0 scripts/qemustart: use squashfs instead of ext4
The qemustart script currently picks the ext4 filesystem rather than
squashfs, while the latter is default for nearly all OpenWrt targets.

Change the default behaviour of qemustart to be in line with the rest.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-01-01 17:49:05 -10:00
Marek Lindner
4871fd2616 ipq40xx: add support for Plasma Cloud PA2200
Device specifications:

* QCA IPQ4019
* 256 MB of RAM
* 32 MB of SPI NOR flash (w25q256)
  - 2x 15 MB available; but one of the 15 MB regions is the recovery image
* 2T2R 2.4 GHz
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=PlasmaCloud-PA2200
* 2T2R 5 GHz (channel 36-64)
  - QCA9888 hw2.0 (PCI)
  - requires special BDF in QCA9888/hw2.0/board-2.bin
    bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA2200
* 2T2R 5 GHz (channel 100-165)
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=PlasmaCloud-PA2200
* GPIO-LEDs for 2.4GHz, 5GHz-SoC and 5GHz-PCIE
* GPIO-LEDs for power (orange) and status (blue)
* 1x GPIO-button (reset)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x gigabit ethernet
  - phy@mdio3:
    + Label: Ethernet 1
    + gmac0 (ethaddr) in original firmware
    + used as LAN interface
  - phy@mdio4:
    + Label: Ethernet 2
    + gmac1 (eth1addr) in original firmware
    + 802.3at POE+
    + used as WAN interface
* 12V 2A DC

Flashing instructions:

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.

Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai>
[sven@narfation.org: prepare commit message, rebase, use all LEDs, switch
to dualboot_datachk upgrade script, use eth1 as designated WAN interface]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-12-22 19:11:50 +01:00
Marek Lindner
ea5bb6bbfe ipq40xx: add support for Plasma Cloud PA1200
Device specifications:

* QCA IPQ4018
* 256 MB of RAM
* 32 MB of SPI NOR flash (w25q256)
  - 2x 15 MB available; but one of the 15 MB regions is the recovery image
* 2T2R 2.4 GHz
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200
* 2T2R 5 GHz
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200
* 3x GPIO-LEDs for status (cyan, purple, yellow)
* 1x GPIO-button (reset)
* 1x USB (xHCI)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x gigabit ethernet
  - phy@mdio4:
    + Label: Ethernet 1
    + gmac0 (ethaddr) in original firmware
    + used as LAN interface
  - phy@mdio3:
    + Label: Ethernet 2
    + gmac1 (eth1addr) in original firmware
    + 802.3af/at POE(+)
    + used as WAN interface
* 12V/24V 1A DC

Flashing instructions:

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.

Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai>
[sven@narfation.org: prepare commit message, rebase, use all LEDs, switch
to dualboot_datachk upgrade script, use eth1 as designated WAN interface]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-12-22 19:11:50 +01:00
Sven Eckelmann
5fc28ef479 ath79: Add support for Plasma Cloud PA300
Device specifications:

* Qualcomm/Atheros QCA9533 v2
* 650/600/217 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash (mx25l12805d)
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4 GHz Wi-Fi
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + Label: Ethernet 1
    + 24V passive POE (mode B)
    + used as WAN interface
  - eth1
    + Label: Ethernet 2
    + 802.3af POE
    + builtin switch port 2
    + used as LAN interface
* 12-24V 1A DC
* internal antennas

Flashing instructions:

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-12-22 19:11:50 +01:00
Sven Eckelmann
3599ea5263 images: Fix sysupgrade.tar for devices with NOR flash
The NOR flash rootfs images stored in a sysupgrade.tar must end with the
JFFS2 marker. Otherwise, devices like OpenMesh A42/A62 are not able to
calculate the md5sum of the fixed squashfs part and store it inside the
u-boot-env.

But the commit ee76bd11bb ("images: fix boot failures on NAND with small
sub pages") adds up to 1020 0x00 bytes after the 0xdead0de EOF marker. The
calculated md5sum will be wrong due do this change and u-boot will fail to
boot the newly flashed device with a message like:

  Validating MD5Sum of 'vmlinux'...
  Passed!
  Validating MD5Sum of 'rootfs'...
  Failed!
      583a1b7b54b8601efa64ade42742459b != 8850ee812dfd7638e94083329d5d2781

  Data validation failed!

and boot the old image again.

Since the original change should not change the behavior of NOR images,
just check for the deadc0de marker at the end of the squashfs-jffs2 image
do avoid the problematic behavior for these images.

Fixes: ee76bd11bb ("images: fix boot failures on NAND with small sub pages")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-12-22 19:11:50 +01:00
Sven Eckelmann
a4c30d9399 scripts/om-fwupgradecfg-gen.sh: Generate checksum over whole squashfs
The rootfs is padded to the full block size by padjffs2 and a 4 byte magic
value ("deadc0de") is added to the end. On first boot, the JFFS2 is
replacing the "deadc0de" marker when the rootfs_data is initialized.

The static part of the rootfs is therefore $rootfs_size - 4 and not
$rootfs_size - 262144 - 4.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-12-22 19:11:50 +01:00
Sven Eckelmann
7c75eaadfc scripts/om-fwupgradecfg-gen.sh: Drop block alignment code
The padding and block alignment is handled by the image build script and
doesn't need to be duplicated in the fwupgrade.cfg build script.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-12-22 19:11:50 +01:00
INAGAKI Hiroshi
fdcdbdfdef scripts: add -N option to mkhash for printing without newline
Added "-N" option, it allow printing hash(es) without newline.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2020-12-22 19:11:50 +01:00
Paul Spooren
bc0ffff36a build/json: add filesystem information
Some images are created using different filesystems, most popular
squashfs and ext4. To allow downstream projects to distinguesh between
those, add the `filesystem` information to created json files.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-12-13 22:07:52 -10:00
Karel Kočí
a3e5b24d43 scripts/feeds: fix preference of package install
The previous behavior prefered same feed for dependent packages as
initial package. This caused inconsitency in installation of packages.
The difference was if two feeds provide same package (different version)
there was different result if you executed install for that specific
version compared to install for package depending on it from different
feed.

This ensures that preferred feed is propagated without change and
selected feed is used only really for package it was selected for.

Signed-off-by: Karel Kočí <karel.koci@nic.cz>
2020-12-09 23:25:05 -10:00
Brian Norris
7f285d0b43 scripts/feeds: warn when skipping core package override
Otherwise, a n00b like myself can get quite confused when moving a
package from core to feeds, for example.

(Hint: one *really* needs to clear out the tmp/info/.packageinfo...
entries for the stale package, but '-f' works as well.)

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2020-12-09 11:30:07 -10:00
Piotr Stefaniak
1db9b5b6d6 build: mkhash on FreeBSD
Apply patch from
https://bugs.openwrt.org/index.php?do=details&task_id=971
in order to make it easier to build OpenWRT on FreeBSD.

Signed-off-by: Piotr Stefaniak <pstef@freebsd.org>
2020-11-27 18:01:22 -10:00
Petr Štetiar
52a5d0d27f download.pl: properly cleanup intermediate .hash file
It seems like after a build the /dl dir seems to now contain a .hash
file for each source file due to inproper cleanup so fix it by removing
those intermediate files before leaving the download action.

Fixes: 4e19cbc553 ("download: handle possibly invalid local tarballs")
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-27 22:27:08 +01:00
Petr Štetiar
4e19cbc553 download: handle possibly invalid local tarballs
Currently it's assumed, that already downloaded tarballs are always
fine, so no checksum checking is performed and the tarball is used even
if it might be corrupted.

From now on, we're going to always check the downloaded tarballs before
considering them valid.

Steps to reproduce:

 1. Remove cached tarball

   rm dl/libubox-2020-08-06-9e52171d.tar.xz

 2. Download valid tarball again

   make package/libubox/download

 3. Invalidate the tarball

   sed -i 's/PKG_MIRROR_HASH:=../PKG_MIRROR_HASH:=ff/' package/libs/libubox/Makefile

 4. Now compile with corrupt tarball source

   make package/libubox/{clean,compile}

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-27 14:46:13 +01:00
Hannu Nyman
2b1d92f134 scripts/feeds: silence git warning by selecting pull style
Silence the warning in git 2.27 about undefined fast-forward style
in git pull. Define "ff-only" as the style.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-11-26 19:29:18 -10:00
Paul Spooren
0c87304d2b scripts: add size_compare.sh
As package size changes are a continuous topic on the mailing list this
scripts helps developers to compare their local package modifications
against latest upstream.

The script downloads the latest package indexes based on env variables
or the `.config` file. The script compares the actual installed size
(data.tar.gz) or the IPK package size.

An example output is found below:

```
user@dawn:~/src/openwrt/openwrt$ ./scripts/size_compare.sh
Compare packages of ath79/tiny/mips_24kc:
dropbear busybox iw ubus

Checking configuration difference
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100   554  100   554    0     0    336      0  0:00:01  0:00:01 --:--:--   336

 --- start config diff ---
--- /tmp/config.DDjwVh-LOCAL	2020-11-23 09:08:28.913203068 -1000
+++ /tmp/config.DDjwVh-UPSTREAM	2020-11-23 09:08:36.369240887 -1000
@@ -1,5 +1,9 @@
+CONFIG_ALL_KMODS=y
+CONFIG_ALL_NONSHARED=y
 CONFIG_AUTOREBUILD=y
+CONFIG_AUTOREMOVE=y
--- 8< ---
 CONFIG_BINARY_FOLDER=""
+CONFIG_BUILDBOT=y
+CONFIG_TARGET_ALL_PROFILES=y
 CONFIG_TARGET_ROOTFS_DIR=""
 CONFIG_USE_SSTRIP=y
 CONFIG_USE_UCLIBCXX=y
 --- end config diff ---

Checking installed size

Fetching latest package indexes...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 80634  100 80634    0     0  33499      0  0:00:02  0:00:02 --:--:-- 33485
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 54082  100 54082    0     0  24252      0  0:00:02  0:00:02 --:--:-- 24252

Comparing package sizes...
Change 	Local	Remote 	Package
+271	51386	51115	base-files
+123	705241	705118	bnx2-firmware
+86	17209	17123	fstools
+22	47989	47967	procd
+21	208311	208290	busybox
+19	67181	67162	netifd

```

I plan to integrate this script into the CI so we have a summary how
sizes change over different architectures.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-24 18:18:48 -10:00
David Bauer
d369993898 scripts: download.pl: retry download using filename
With this commit, the download script will try downloading source files
using the filename instead of the url-filename in case the previous
download attempt using the url-filename failed.

This is required, as the OpenWrt sources mirrors serve files using the
filename files might be renamed to after downloading. If the original
mirror for a file where url-filename and filename do not match goes
down, the download failed prior to this patch.

Further improvement can be done by performing this only for the
OpenWrt sources mirrors.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-11-20 02:35:43 +01:00
Adrian Schmutzler
7e7470b517 scripts: add const_structs.checkpatch for checkpatch.pl
Kernel has separated the structs that are reported to be const in
checkpatch.pl into a file of its own, const_structs.checkpatch.

This file has been missing after the recent update of checkpatch.pl,
leading to the following message:

  No structs that should be const will be found - file
  '/data/openwrt/scripts/const_structs.checkpatch': No such file
  or directory

This commit adds the relevant file from v5.10-rc4.

Fixes: 086ee09bbc ("scripts: Update checkpatch.pl to 2020-06-11")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-18 21:50:58 +01:00
Adrian Schmutzler
6fdd4187e0 scripts: checkpatch.pl: suppress warnings about MAINTAINERS
The kernel expects changes to MAINTAINERS for all removed or added
files, printing warnings like:

  WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
  #828:
  deleted file mode 100644

Since this does not apply to "our" files in OpenWrt repo, this
warning should be disabled.

This can be achieved easiest by setting $reported_maintainer_file
to 1. While this is a hack that tricks the script into believing
the proper MAINTAINERS changes have been made, it's the easiest
solution as it does not require to touch any other code.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-18 21:50:53 +01:00
Felix Fietkau
184d735707 scripts/kconfig.pl: allow regex syntax in filtering out config entries
This will be used to filter out some autogenerated config values from
the kernel config files

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-13 13:17:53 +01:00
Paul Spooren
3c0357e7b4 scripts: add spelling.txt for checkpatch.pl
Running the updated checkpatch version with spelling.txt show that
spelling mistakes happen to everyone.

> /target/linux$ fd .*.patch | xargs ../../scripts/checkpatch.pl | rg spell
WARNING: 'usefull' may be misspelled - perhaps 'useful'?
WARNING: 'afecting' may be misspelled - perhaps 'affecting'?
WARNING: 'usefull' may be misspelled - perhaps 'useful'?
WARNING: 'afecting' may be misspelled - perhaps 'affecting'?
WARNING: 'begining' may be misspelled - perhaps 'beginning'?
WARNING: 'superflous' may be misspelled - perhaps 'superfluous'?
WARNING: 'multipe' may be misspelled - perhaps 'multiple'?
WARNING: 'recieves' may be misspelled - perhaps 'receives'?
WARNING: 'retreive' may be misspelled - perhaps 'retrieve'?
WARNING: 'tranfer' may be misspelled - perhaps 'transfer'?
WARNING: 'additonal' may be misspelled - perhaps 'additional'?
WARNING: 'accomodate' may be misspelled - perhaps 'accommodate'?
[...]

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-12 18:21:55 +01:00