ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 10:39:04 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
15,831 Commits 10 Branches 76 Tags 896 MiB
8858d90afe
Commit Graph

487 Commits

Author SHA1 Message Date
Felix Fietkau
8858d90afe ar71xx: improve 2.6.36 compatibility. also, instead of adding a forward port patch to the 2.6.36 patches, add a backport patch to 2.6.32 
SVN-Revision: 23574
 2010-10-21 18:42:11 +00:00
Jo-Philipp Wich
a680385396 remove remaining references to dev-ap91-eth.h, patch by Stijn Tintel 
SVN-Revision: 23451
 2010-10-14 23:08:10 +00:00
Felix Fietkau
fc035b3cb6 ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver 
SVN-Revision: 23439
 2010-10-14 13:41:42 +00:00
Felix Fietkau
3941621dbc ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563) 
SVN-Revision: 23432
 2010-10-14 00:14:59 +00:00
Felix Fietkau
b61a804bf7 ar71xx: increase rb4xx nand kernel partition size (patch by danimo) 
SVN-Revision: 23293
 2010-10-07 14:27:34 +00:00
Gabor Juhos
697f5d0bdd ar71xx: initial support for jjPlus JWAP003 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)

SVN-Revision: 23165
 2010-10-01 07:09:29 +00:00
Felix Fietkau
8511c6b16c AP96: Fix LAN/WAN setup 
LAN (eth0) is behind a switch and the fixed speed/duplex was
supposed to be for it, not WAN (eth1).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23147
 2010-09-28 22:55:14 +00:00
Gabor Juhos
32d12d5e5c ar71xx: add support for the TL-MR3420 v1 board 
SVN-Revision: 23136
 2010-09-27 14:53:59 +00:00
Gabor Juhos
b831ebdde9 ar71xx: AR724[12] requires different USB setup 
SVN-Revision: 23135
 2010-09-27 14:53:57 +00:00
Gabor Juhos
cda8655910 ar71xx: use the MDIO interface of the 2nd MAC on the ar7241 
SVN-Revision: 23132
 2010-09-27 14:53:49 +00:00
Gabor Juhos
b445943cdf ar71xx: move ath9k specific PCI fixup into a separate file 
SVN-Revision: 23131
 2010-09-27 14:53:46 +00:00
Gabor Juhos
4ae167959b ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCs 
With this change ath9k can handle the wireless chip on the TL-WR841N v7
board which is based on the AR7241 SoC.

SVN-Revision: 23130
 2010-09-27 14:53:43 +00:00
Felix Fietkau
a7bb7dd99e Add support for Atheros AP96 reference board 
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23125
 2010-09-27 08:59:53 +00:00
Felix Fietkau
0c6653c6e2 ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND 
SVN-Revision: 22935
 2010-09-05 16:17:06 +00:00
Gabor Juhos
b4336a8e2d ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards 
SVN-Revision: 22882
 2010-09-03 18:14:37 +00:00
Gabor Juhos
47f8fd1dde ar71xx: rewrite SPI drivers for the RB4xx boards 
* add a new SPI controller driver
  * add SPI driver for the CPLD chip
  * convert the NAND driver
  * enable the mikroSD slot
  * enable more LEDs

SVN-Revision: 22863
 2010-08-31 20:13:47 +00:00
Gabor Juhos
7bc5a672c1 ar71xx: change mac address initialization 
SVN-Revision: 22700
 2010-08-18 16:00:28 +00:00
Felix Fietkau
523fcf0497 ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 
SVN-Revision: 22675
 2010-08-16 19:21:57 +00:00
Felix Fietkau
65899cfa49 ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do 
SVN-Revision: 22401
 2010-07-27 21:04:43 +00:00
Felix Fietkau
900aaa919b ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values) 
SVN-Revision: 22353
 2010-07-22 12:37:44 +00:00
Felix Fietkau
bced5d7d74 ar71xx: set default values for the fifo cfg registers on AR724x 
SVN-Revision: 22303
 2010-07-20 01:54:11 +00:00
Gabor Juhos
4bb11f9a39 generic: move ath5k_platform.h from ar71xx to generic files 
SVN-Revision: 22189
 2010-07-15 07:36:58 +00:00
Gabor Juhos
95e09cccd8 ar71xx: in-flash macs and eeprom for mach-eap7660d 
This adds in-flash mac-addresses and calibration data for the Senao
EAP7660D board.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 22187
 2010-07-15 07:36:52 +00:00
Felix Fietkau
a27ea45e76 ar71xx: only reinit the ethernet MAC at .open() on ar724x for now, until we've figured out what part of it causes the issue described in #7563 
SVN-Revision: 22075
 2010-07-06 12:40:07 +00:00
Felix Fietkau
15b209d09f ag71xx: reset the hardware during open(), this improves recovery from tx timeouts on ar724x considerably 
SVN-Revision: 22055
 2010-07-04 02:15:08 +00:00
Felix Fietkau
89da22d1ea ag71xx: fix a memory corruption bug that happens if you flood the interface with packets while it's being brought down fixes boot time crashes under load reported by matteo 
SVN-Revision: 22054
 2010-07-04 01:31:33 +00:00
Gabor Juhos
5a28fb88a4 ar71xx: fix leds-rb750 build failure on 2.6.34 
SVN-Revision: 22016
 2010-07-01 14:49:06 +00:00
Gabor Juhos
7bff9c0101 ar71xx: add support for the Senao EAP7660D board 
This patch adds support for the Senao EAP7660D board to trunk.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 21837
 2010-06-18 16:22:05 +00:00
Gabor Juhos
08c2e29018 ar71xx: avoid duplicated 'board' parameter in kernel command line 
SVN-Revision: 21805
 2010-06-14 20:02:44 +00:00
Gabor Juhos
9789f0215a ar71xx: nuke AR71XX_MACH_UBNT_AR71XX machtype 
SVN-Revision: 21764
 2010-06-12 13:20:39 +00:00
Gabor Juhos
adb0a95df1 ar71xx: fix phy_mask for the RB450 
SVN-Revision: 21743
 2010-06-09 19:48:35 +00:00
Gabor Juhos
6ce447427c ar71xx: fix build error in the rb{4xx,750}_nand drivers on 2.6.34/35 
SVN-Revision: 21736
 2010-06-09 15:31:34 +00:00
Gabor Juhos
d55ebf3a8a ar71xx: fix phy_mask on the RB433 for the IP17xx driver 
SVN-Revision: 21728
 2010-06-08 20:19:18 +00:00
Gabor Juhos
90e2b1ad6b ar71xx: fix 2.6.34 build errors 
SVN-Revision: 21698
 2010-06-07 09:18:13 +00:00
Gabor Juhos
115f845e53 ar71xx: fix nbg460n mtd partitions 
This fixes the NBG460N/550N/550NH mtd partitions.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 21443
 2010-05-14 08:37:58 +00:00
Gabor Juhos
fca9b7ebad ar71xx: remove config partition from the mtd map on the MZK-W300NH board 
This space can be used to extend the rootfs_data partition.

SVN-Revision: 21173
 2010-04-26 18:28:04 +00:00
Gabor Juhos
77b2354fcd ar71xx: fix firmware partition size on the MZK-W04NU board 
SVN-Revision: 21172
 2010-04-26 18:28:01 +00:00
Felix Fietkau
7966004d99 ag71xx: remove rx alignment code for small packets, it seems to break ipv6 for some reason (fixes #7236) 
SVN-Revision: 21166
 2010-04-26 16:39:13 +00:00
Felix Fietkau
9848d38aed ar71xx: fix a wifi card stability issue 
when we receive a pci/ahb interrupt, we need to flush pending data for dma
from the device, otherwise the tx path may get stuck if the completion flag
of the dma descriptor is not updated at the time the tx interrupt arrives.

SVN-Revision: 21143
 2010-04-24 17:24:11 +00:00
Gabor Juhos
10ed3b23a6 ar71xx: reduce button threshold value on the NBG460 board 
SVN-Revision: 21076
 2010-04-21 19:07:23 +00:00
Gabor Juhos
9933d34770 ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons 
SVN-Revision: 21075
 2010-04-21 19:07:19 +00:00
Gabor Juhos
693ea524c1 ar71xx: adding support for zyxel nbg460n/550n/550nh boards 
This patch adds support for the zyxel nbg460n/550n/550nh routers.
Currently this only works if a second stage bootloader is also flashed,
as the used switch needs extra initialization.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 20990
 2010-04-18 16:24:12 +00:00
Felix Fietkau
1c0e751391 ar71xx: fix up alignment handling 
- on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned
- alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment
- ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets
- use memmove to re-align small packets, if necessary

tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers

SVN-Revision: 20892
 2010-04-15 23:31:17 +00:00
Gabor Juhos
dd7304ec6d ar71xx: update phy masks for the Planex boards 
This avoids probing of the AR8216 chip on the eth0 interface.

Cc: backfire@openwrt.org

SVN-Revision: 20754
 2010-04-09 08:40:14 +00:00
Gabor Juhos
d6c0363884 ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards 
Cc: backfire@openwrt.org

SVN-Revision: 20752
 2010-04-09 08:40:09 +00:00
Gabor Juhos
4c29a2c263 ar71xx: ag71xx: avoid unalinged accesses when using the phy specific receive functions 
Cc: backfire@openwrt.org

SVN-Revision: 20751
 2010-04-09 08:40:06 +00:00
Gabor Juhos
4a28844d80 ar71xx: ag71xx: call the phy driver's netif_receive_skb() 
Ag71xx needs to call the phy's netif_receive_skb() to allow phy drivers
to mangle rx packets. This patch fixes it.

This fixes the header mangling of the AR8216 driver.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
Cc:backfire@openwrt.org

SVN-Revision: 20750
 2010-04-09 08:38:46 +00:00
Felix Fietkau
df463abb18 ar71xx: fix ethernet on final pb92 board (previous value was based on a preliminary version) 
SVN-Revision: 20725
 2010-04-06 00:12:50 +00:00
Jo-Philipp Wich
23bebe33a7 Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. 
[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.

SVN-Revision: 20722
 2010-04-05 23:03:16 +00:00
Gabor Juhos
c874513cfa ar71xx: fix broken LAN ports on the boards with AR8216 switch (closes #7024) 
* cc: backfire@openwrt.org

SVN-Revision: 20673
 2010-04-03 13:59:08 +00:00