Commit Graph

1873 Commits

Author SHA1 Message Date
Manas Sambhus
db0c0a31d8
ppp: use modprobe in place of insmod
This will prevent `module is already loaded` lines from
appearing in the logs when a PPP connection is reconnecting

Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
2022-09-27 17:16:42 +02:00
Felix Fietkau
8cb995445a hostapd: add ubus notification on sta authorized
Also include the station auth_type in the ubus and log message in order
to detect, if clients used FT or FILS to associate

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-22 15:26:58 +02:00
Felix Fietkau
6eeb5d4564 kernel: disable wireless extensions only when needed
They are only needed by a few very old drivers

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-22 15:26:58 +02:00
David Bauer
94037ab6b0 hostapd: update to 2022-07-29
b704dc72e tests: sigma_dut and updated ConfResult value for Configurator failures
89de431f2 DPP: Add config response status value to DPP-CONF-SENT
10104915a tests: sigma_dut and DPP PB session overlap
80d5e264c Enhance QCA vendor roam event to indicate MLO links after reassociation
662249306 Update copyright notices for the QCA vendor definitions
8adcdd659 tests: Temporary workaround for dpp_chirp_ap_5g
ddcd15c2d tests: Fix fuzzing/sae build
7fa67861a tests: Fix p2p_channel_avoid3
ee3567d65 tests: Add more time for scan/connection
1d08b238c nl80211: Allow more time for the initial scan with 6 GHz
ac9e6a2ab tests: Allow 6 GHz opclasses in MBO checks
faf9c04cb Remove a host of unnecessary OPENSSL_IS_BORINGSSL ifdefs
b9cd5a82f Always process pending QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH data
ef4cd8e33 QoS: Use common classifier_mask for ipv4/ipv6
93be02592 Add fixed FDD mode to qca_btc_chain_mode QCA vendor attribute
e7cbfa1c1 tests: sigma_dut and DPP Enrollee unsupported curves
5565fbee2 DPP: Check Enrollee supported curves when building Config Response
ceae05cec tests: sigma_dut and DPP MUDURL setting for hostapd
4cfb484e9 DPP: Allow dpp_controller_start without arguments in CLIs
c97000933 Fix ifdef condition for imsi_privacy_cert
2a9a61d6c tests: SAE with extended key AKM
e35f6ed1d tests: More detailed report on SAE PMKSA caching error case
f70db167a SAE: Derive a variable length PMK with the new AKM suites
91010e6f6 SAE: Indicate AKM suite selector in commit for new AKM suites
e81ec0962 SAE: Use H2E unconditionally with the new AKM suites
f8eed2e8b SAE: Store PMK length and AKM in SAE data
9dc4e9d13 SAE: EAPOL-Key and key/MIC length information for the new AKM suites
a32ef3cfb SAE: Driver capability flags for the new SAE AKM suites
91df8c9c6 SAE: Internal WPA_KEY_MGMT_* defines for extended key AKMs
5c8a714b1 SAE: Use wpa_key_mgmt_sae() helper
5456b0f26 Define new RSN AKM suite selector values
def33101c DPP: Clear push button announcement state on wpa_supplicant FLUSH
35587fa8f tests: DPP Controller/Relay with need to discover Controller
d22dfe918 DPP: Event message for indicating when Relay would need a Controller
ca7892e98 tests: DPP Relay and adding/removing connection to a Controller
bfe3cfc38 DPP: Allow Relay connections to Controllers to be added and removed
808834b18 Add a comparison function for hostapd_ip_addr
f7763880b DPP: Advertise Configurator connectivity on Relay automatically
ff7cc1d49 tests: DPP Relay and dynamic Controller addition
ca682f80a DPP: Dynamic Controller initiated connection on Relay
d2388bcca DPP: Strict validation of PKEX peer bootstrapping key during auth
a7b8cef8b DPP3: Fix push button boostrapping key passing through PKEX
69d7c8e6b DPP: Add peer=id entry for PKEX-over-TCP case
b607d2723 tests: sigma_dut and DPP PB Configurator in wpa_supplicant
1ff9251a8 DPP3: Push button Configurator in wpa_supplicant
b94e46bc7 tests: PB Configurator in wpa_supplicant
ca4e82cbf tests: sigma_dut DPP/PKEX initiator as Configurator over TCP and Wi-Fi
e9137950f DPP: Recognize own PKEX Exchange Request if it ends up being received
692956446 DPP: Note PKEX code/identifier deletion in debug log
dfa9183b1 tests: DPP reconfig after Controller-initiated operation through Relay
ae4a3a6f6 DPP: Add DPP-CONF-REQ-RX event for Controller
17216b524 tests: sigma_dut DPP/PKEX initiator as Configurator (TCP) through Relay
fb2937b85 DPP: Allow Controller to initiate PKEX through Relay
15af83cf1 DPP: Delete PKEX code and identifier on success completion of PKEX
d86ed5b72 tests: Allow DPP_PKEX_REMOVE success in dpp_pkex_hostapd_errors
0a4f391b1 tests: sigma_dut and DPP Connector Privacy
479e412a6 DPP3: Default value for dpp_connector_privacy
7d12871ba test: DPP Private Peer Introduction protocol
148de3e0d DPP3: Private Peer Introduction protocol
786ea402b HPKE base mode with single-shot API
f0273bc81 OpenSSL: Remove a forgotten debug print
f2bb0839f test: DPP 3rd party config information
68209ddbe DPP: Allow 3rd party information to be added into config object
0e2217c95 DPP: Allow 3rd party information to be added into config request obj
3d82fbe05 Add QCA vendor subcommand and attributes for SCS rule configuration
16b62ddfa QCA vendor attribute for DBAM configuration
004b1ff47 tests: DPP Controller initiating through Relay
451ede2c3 DPP: Allow AP/Relay to be configured to listed for new TCP connections
248654d36 tests: sigma_dut DPP PB test cases
697b7d7ec tests: DPP push button
7bbe85987 DPP3: Allow external configuration to be specified on AP for PB
8db786a43 DPP3: Testing functionality for push button announcements
37bccfcab DPP3: Push button bootstrap mechanism
a0054fe7c Add AP and STA specific P802.11az security capabilities (vendor command)
159e63613 QCA vendor command for CoAP offload processing
3b7bb17f6 Add QCA vendor attribute for TIM beacon statistics
09a281e52 Add QCA vendor interface for PASN offload to userspace
809fb96fa Add a vendor attribute to configure concurrency policy for AP interface
a5754f531 Rename QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY
085a3fc76 EHT: Add 320 channel width support
bafe35df0 Move CHANWIDTH_* definitions from ieee80211_defs.h to defs.h
92f549901 tests: Remove the 80+80 vs. 160 part from wpa2_ocv_ap_vht160_mismatch
c580c2aec tests: Make OCV negative test error cases more robust
3c2ba98ad Add QCA vendor event to indicate driver recovery after internal failures
6b461f68c Set current_ssid before changing state to ASSOCIATING
8dd826741 QCA vendor attribute to configure direct data path for audio traffic
504be2f9d QCA vendor command support to get WLAN radio combinations
d5905dbc8 OCV: Check the Frequency Segment 1 Channel Number only on 80+80 MHz

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-09-20 01:15:36 +02:00
David Bauer
5110cf7ebd hostapd: don't select indoor channel on outdoor operation
Don't select channels designated for exclusive-indoor use when the
country3 element is set on outdoor operation.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-09-18 03:58:54 +02:00
Felix Fietkau
2b1e651178 unetd: add missing init script
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-16 22:02:28 +02:00
Felix Fietkau
51c727e268 unetd: update to the latest version
e065a7627a46 pex: update last query sent timestamp
6c888f897862 unet-cli: add stun server list editing support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-16 21:58:07 +02:00
Felix Fietkau
40874f0934 unetd: update to the latest version
21360a1b1ce6 cli: fix typo
abfebece0af1 wg-linux: ship a copy of linux/wireguard.h
1cbb1a543cb3 pex: reduce unnecessary ping traffic
0c2f39e52d5d pex: remove pex event debug spam
dcf1362c2104 pex: add support for sending/receiving global PEX messages via unix socket
df5f70b8858c ubus: notify on network updates
e58a56697131 add DHT discovery service
be175767bc67 pex: keep active pex hosts after the specified timeout
543e4a3d2ed7 pex: move rx header check to callback function
395659b9c415 pex: move raw ip send code to sendto_rawudp() in utils.c
dda15ea8b3b2 pex: add utility function to get the sockets based on type / address family
e88f2cd4d3f0 utils: add support for passings address family to network_get_endpoint()
639cdcdf6eda pex: add support for figuring out the external data port via STUN servers
9144339ebe1f pex: improve handling of a longer list of PEX hosts
38212218ecdd unet-cli: add DHT support
0d37ca75434d pex: automatically create host entries from incoming endpoint port notifications
035fcc56ef60 host: keep multiple endpoint candidates, one for each type
a089e8ae7504 pex: avoid sending a query to a host more than once every 15 seconds

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-16 21:11:32 +02:00
Felix Fietkau
f8e3d7a4e3 unetd: select unetd from unet-cli instead of depending on it
Some people may explicitly want to select unet-cli for admin purposes

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-16 21:11:32 +02:00
Felix Fietkau
55aa11d121 unetd: only depend on bpf-headers if BPF toolchain support is available
If BPF is unavailable, unetd can be built without it (by disabling VXLAN support).

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-12 21:31:27 +02:00
Nick Hainke
5a80226e96 lldpd: update to 1.0.15
Release Notes:
https://github.com/lldpd/lldpd/releases/tag/1.0.15

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-11 01:30:11 +02:00
Nick Hainke
8eca549bdc lldpd: add PKG_CPE_ID
Add CPE ID for tracking CVEs.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-06 16:36:37 +01:00
Felix Fietkau
09ea1db93b hostapd: rename hostapd multicast_to_unicast option to multicast_to_unicast_all
There are two feature currently altered by the multicast_to_unicast option.
1. bridge level multicast_to_unicast via IGMP snooping
2. hostapd/mac80211 config multicast_to_unicast setting

The hostapd/mac80211 setting has the side effect of converting *all* multicast
or broadcast traffic into per-station duplicated unicast traffic, which can
in some cases break expectations of various protocols.
It also has been observed to cause ARP lookup failure between stations
connected to the same interface.

The bridge level feature is much more useful, since it only covers actual
multicast traffic managed by IGMP, and it implicitly defaults to 1 already.

Renaming the hostapd/mac80211 option to multicast_to_unicast_all should avoid
unintentionally enabling this feature

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-06 12:15:48 +02:00
Felix Fietkau
90f55f5bf1 unetd: update to the latest version
f5d02c32f811 pex: add support for sending endpoint notification from the wg port via raw socket
c3b1127236a0 ubus: add support for querying active networks
8ad119715168 ubus: add support for adding auth_connect hosts at runtime
26dc52789d41 network: add support for configuring extra peers via a separate json file
d7fb9e5b065b ubus: add reload command

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-01 20:42:08 +02:00
Felix Fietkau
23a7188ab4 unetd: fix handling of connect/tunnel list
change the type to array, so that uci lists can be used

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-01 20:42:08 +02:00
Felix Fietkau
2984a04206 mac80211: disable ft-over-ds by default
Testing has shown it to be very unreliable in variety of configurations.
It is not mandatory, so let's disable it by default until we have a better
solution.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-08-30 10:58:20 +02:00
Felix Fietkau
f39d9ea0c2 unetd: update to the latest version, makes VXLAN/eBPF optional
b75791a6db25 scripts/update-cmd.pl: reorder add/remove calls to better deal with dynamic changes
c29e1ad045d0 scripts/update-cmd.pl: set device up before adding routes/addresses
5ad35ce4beea scripts/update-cmd.pl: run update two times
5d79b88f00c1 add support for overriding peer-exchange-port for individual hosts
0041fcacb624 add support for disabling VXLAN/eBPF support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-08-29 20:55:49 +02:00
Felix Fietkau
314cad2cba unetd: update to the latest version
5cbd55f60346 unet-cli: fix formatting of help text
59b97448b636 build.sh: force use of -fPIC on static libraries to fix build error
74a14c00abb0 pex-msg: fix siphash key initializer

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-08-28 22:31:18 +02:00
Felix Fietkau
104de8abe4 unetd: add WireGuard based VPN connection manager for OpenWrt
This package simplifies setting up wireguard networks on OpenWrt by a wireguard
network as a JSON file, which can be shared across all participating nodes.
It can be signed with an authentication key and automatically kept in sync.
unetd also supports deterministically generating ipv6 addresses for each host
based on the public key and storing those in a hosts file that can be used with
dnsmasq. It also supports automatically creating VXLAN tunnels between multiple
endpoints.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-08-27 15:24:58 +02:00
Jo-Philipp Wich
4ee77cfcfa uhttpd: update to latest Git HEAD
e3395cd ucode: initialize search path before VM init
8cb3f85 ucode: initialize default library search path
188dea2 utils: accept '?' as path terminator in uh_path_match()
c5eac5d file: support using dynamic script handlers as error pages
290ff88 relay: trigger close if in header read state with pending data
f9db538 ucode: ignore exit exceptions
8ba0b64 cmake: use variables and find_library for dependency

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-08-24 23:25:11 +02:00
Joerg Werner
9fbb76c047 hostapd: fix WPA3 enterprise keys and ciphers
WPA3 enterprise requires group_mgmt_cipher=BIP-GMAC-256 and if 802.11r is
active also wpa_key_mgmt FT-EAP-SHA384. This commit also requires
corresponding changes in netifd.

Signed-off-by: Joerg Werner <schreibubi@gmail.com>
2022-08-20 22:56:12 +02:00
Stijn Tintel
f37a7fa4e8 hostapd: add mbo flag to get_clients ubus method
There is no WLAN_STA_MBO flag, but according to the hostapd source code,
when an STA does not support MBO, cell_capa will be 0. Use this to
indicate MBO support in the get_clients ubus method.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Reviewed-by: David Bauer <mail@david-bauer.net>
2022-08-15 16:53:27 +03:00
Chen Minqiang
31cca8f8d3 umdns: add missing syscall to seccomp filter
There is some syscall missing:
'getdents64'
'getrandom'
'statx'
'newfstatat'

Found with:
'mkdir /etc/umdns; ln -s /tmp/1.json /etc/umdns/; utrace /usr/sbin/umdns'

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2022-08-05 14:10:42 +02:00
Boris Krasnovskiy
00718b9d7a hostapd: prevent unused crypto lib dependencies from being compiled
Prevented unused crypto lib dependencies from being compiled

Signed-off-by: Boris Krasnovskiy <borkra@gmail.com>
2022-07-31 00:11:21 +02:00
Manuel Giganto
d12eb103e8
hostapd: add ppsk option (private psk)
This PR allows a user to enable a private psk, where each station
may have it's own psk or use a common psk if it is not defined.
The private psk is defined using the sta's mac and a radius server
is required.

ppsk option should be enabled in the wireless configuration along with
radius server details. When using PPSK, the key is ignored, it will be
retrieved from radius server. SAE is not yet supported (private sae) in
hostapd.

Wireless example configuration:
	option encryption 'psk2+ccmp'
	option ppsk '1'
	option auth_server '127.0.0.1'
	option auth_secret 'radiusServerPassword'

If you want to use dynamic VLAN on PPSK also include:
	option dynamic_vlan '2'
	option vlan_tagged_interface 'eth0'
	option vlan_bridge 'br-vlan'
	option vlan_naming '0'

It works enabling mac address verification on radius server and
requiring the tunnel-password (the private psk) from radius server.

In the radius server we need to configure the users. In case of
freeradius: /etc/freeradius3/mods-config/files/authorize
The user and Cleartext-Password should be the mac lower case using the
format "aabbccddeeff"

<sta mac> Cleartext-Password := "<sta mac>"
	Tunnel-Password = <Private Password>

Example of a user configured in radius and using dynamic VLAN5:

8cb84a000000 Cleartext-Password := "8cb84a000000"
	Tunnel-Type = VLAN,
	Tunnel-Medium-Type = IEEE-802,
	Tunnel-Private-Group-ID = 5,
	Tunnel-Password = MyPrivPw

If we want to have a default or shared psk, used when the mac is not
found in the list, we need to add the following at the end of the radius
authorize file:

DEFAULT Auth-Type := Accept
	Tunnel-Password = SharedPw

And if using VLANs, for example VLAN6 for default users:
DEFAULT Auth-Type := Accept
	Tunnel-Type = VLAN,
	Tunnel-Medium-Type = IEEE-802,
	Tunnel-Private-Group-ID = 6,
	Tunnel-Password = SharedPw

Signed-off-by: Manuel Giganto <mgigantoregistros@gmail.com>
2022-07-15 08:20:36 +02:00
Paul Blazejowski
4a1dcaf848 hostapd: apply patch to fix building openssl variant
Add patch from:
https://patchwork.ozlabs.org/project/hostap/patch/20220622121355.1337612-1-a.heider@gmail.com/

Fixes: dab9103 ("hostapd: update to 2022-06-02")
Signed-off-by: Paul Blazejowski <paulb@blazebox.homeip.net>
2022-07-11 00:50:54 +02:00
Nick Hainke
ce6e034c52 lldpd: update to 1.0.14
Changes
- Add configure commands to alter inventory TLVs

Fixes
- Update seccomp rules for newer kernel/libc
- Correctly handle an interface whose index has changed
- Don't send VLANs when there are too many

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-07-10 19:07:47 +02:00
Nick Hainke
2c7101360f lldpd: switch to codeload.github.com
The mirror does not seem to work well anymore. Switch to
codeload.github.com.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-07-10 19:07:47 +02:00
Michael Yartys
442708dfe2 wpa_supplicant: compile with OCV support
Operating Channel Validation (OCV) is a security feature designed to
prevent person-in-the-middle multi-channel attacks. Compile -basic and
-full variants with support for OCV. This feature can be configured in the
wireless config by setting ocv equal to one of the following values:

0 = disabled (hostapd/wpa_supplicant default)
1 = enabled if wpa_supplicant's SME in use. Otherwise enabled only when the
    driver indicates support for operating channel validation.

Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
2022-07-03 20:25:38 +02:00
Michael Yartys
f60628f33c hostapd: enable compilation of OCV and add build feature discovery
Operating Channel Validation (OCV) is a security feature designed to
prevent person-in-the-middle multi-channel attacks. Compile the -basic and
-full variants of hostapd with this feature, and enable discovery of this
feature for future luci integration. OCV can be configured by setting ocv
equal to one of the following values in the wireless config:

0 = disabled (hostapd/wpa_supplicant default)
1 = enabled
2 = enabled in workaround mode - Allow STA that claims OCV capability to
    connect even if the STA doesn't send OCI or negotiate PMF.

Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
2022-07-03 20:25:38 +02:00
Stijn Tintel
6556cad99d hostapd: disable mbo by default
Enabling mbo by default on 802.11ax devices breaks for encryption types
that do not enable 802.11w by default. Disable mbo by default to fix
this. Enabling mbo by default on 802.11ax devices was not explained in
the commit message anyway.

Fixes: 6eee983656 ("hostapd: introduce mbo option")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-06-28 22:16:47 +03:00
Stijn Tintel
5c57f9bbea hostapd: support MBO in bss_transition_request
Support the use of MBO in the bss_transition_request ubus method.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: David Bauer <mail@david-bauer.net>
2022-06-28 03:23:51 +03:00
Stijn Tintel
6eee983656 hostapd: introduce mbo option
Introduce a new option mbo to toggle Multi Band Operation aka Agile
Multiband for a BSS.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: David Bauer <mail@david-bauer.net>
2022-06-28 03:23:51 +03:00
Stijn Tintel
eaad8dfc22 hostapd: enable MBO if 802.11ax is enabled
Multi Band Operation is required for 802.11ax certification, so let's
enable it if 802.11ax support is enabled.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: David Bauer <mail@david-bauer.net>
2022-06-28 03:23:51 +03:00
Stijn Tintel
48c321082c hostapd: add config symbol to enable MBO
Multi Band Operation aka Agile Multiband introduces new Transition
and Transition Rejection Reason Codes that should improve client
steering. Add a config symbol to enable it, and enable it by default for
the full variants.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: David Bauer <mail@david-bauer.net>
2022-06-28 03:23:50 +03:00
Konstantin Demin
f98bb1ffe5 dropbear: cherry-pick upstream commit 544f28a0
Resolves #10081

Reported-By: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2022-06-27 00:57:15 +02:00
Stijn Tintel
33e7f7c028 hostapd: document ubus methods
Document the ubus methods we added to hostapd so that people don't have
to read code to figure out which methods are available and what they do.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-06-21 16:19:42 +03:00
David Bauer
dab91036d6 hostapd: update to 2022-06-02
4383528e0 P2P: Use weighted preferred channel list for channel selection
f2c5c8d38 QCA vendor attribute to configure RX link speed threshold for roaming
94bc94b20 Add QCA vendor attribute for DO_ACS to allow using existing scan entries
b9e2826b9 P2P: Filter 6 GHz channels if peer doesn't support them
d5a9944b8 Reserve QCA vendor sub command id 206..212
ed63c286f Remove space before tab in QCA vendor commands
e4015440a ProxyARP: Clear bridge parameters on deinit only if hostapd set them
02047e9c8 hs20-osu-client: Explicit checks for snprintf() result
cd92f7f98 FIPS PRF: Avoid duplicate SHA1Init() functionality
5c87fcc15 OpenSSL: Use internal FIPS 186-2 PRF with OpenSSL 3.0
9e305878c SAE-PK: Fix build without AES-SIV
c41004d86 OpenSSL: Convert more crypto_ec_key routines to new EVP API
667a2959c OpenSSL: crypto_ec_key_get_public_key() using new EVP_PKEY API
5b97395b3 OpenSSL: crypto_ec_key_get_private_key() using new EVP_PKEY API
177ebfe10 crypto: Convert crypto_ec_key_get_public_key() to return new ec_point
26780d92f crypto: Convert crypto_ec_key_get_private_key() to return new bignum
c9c2c2d9c OpenSSL: Fix a memory leak on crypto_hash_init() error path
6d19dccf9 OpenSSL: Free OSSL_DECODER_CTX in tls_global_dh()
4f4479ef9 OpenSSL: crypto_ec_key_parse_{priv,pub}() without EC_KEY API
b092d8ee6 tests: imsi_privacy_attr
563699174 EAP-SIM/AKA peer: IMSI privacy attribute
1004fb7ee tests: Testing functionality to discard DPP Public Action frames
355069616 tests: Add forgotten files for expired IMSI privacy cert tests
b9a222cdd tests: sigma_dut and DPP curve-from-URI special functionality
fa36e7ee4 tests: sigma_dut controlled STA and EAP-AKA parameters
99165cc4b Rename wpa_supplicant imsi_privacy_key configuration parameter
dde7f90a4 tests: Update VM setup example to use Ubuntu 22.04 and UML
426932f06 tests: EAP-AKA and expired imsi_privacy_key
35eda6e70 EAP-SIM peer: Free imsi_privacy_key on an error path
1328cdeb1 Do not try to use network profile with invalid imsi_privacy_key
d1652dc7c OpenSSL: Refuse to accept expired RSA certificate
866e7b745 OpenSSL: Include rsa.h for OpenSSL 3.0
bc99366f9 OpenSSL: Drop security level to 0 with OpenSSL 3.0 when using TLS 1.0/1.1
39e662308 tests: Work around reentrant logging issues due to __del__ misuse
72641f924 tests: Clean up failed test list in parallel-vm.py
e36a7c794 tests: Support pycryptodome
a44744d3b tests: Set ECB mode for AES explicitly to work with cryptodome
e90ea900a tests: sigma_dut DPP TCP Configurator as initiator with addr from URI
ed325ff0f DPP: Allow TCP destination (address/port) to be used from peer URI
e58dabbcf tests: DPP URI with host info
37bb4178b DPP: Host information in bootstrapping URI
1142b6e41 EHT: Do not check HE PHY capability info reserved fields
7173992b9 tests: Flush scan table in ap_wps_priority to make it more robust
b9313e17e tests: Update ap_wpa2_psk_ext_delayed_ptk_rekey to match implementation
bc3699179 Use Secure=1 in PTK rekeying EAPOL-Key msg 1/4 and 2/4
d2ce1b4d6 tests: Wait for request before responding in dscp_response

Compile-tested: all versions / ath79-generic, ramips-mt7621
Run-tested: hostapd-wolfssl / ath79-generic, ramips-mt7621

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-06-18 22:11:12 +02:00
David Bauer
574539ee2c hostapd: add owe_transition_ifname
Add the owe_transition_ifname config option to wifi-ifaces.

This allows to configure OWE transition VAPs without adding SSID / BSSID
to the uci conifg but instead autodiscovering these parameters from
other networks on the same PHY.

The following configuration creates a OWE transition mode network
constellation.

config wifi-iface 'open0'
	option device 'radio0'
	option ifname 'open0'
	option network 'lan'
	option mode 'ap'
	option ssid 'FreeNet'
	option encryption 'none'
	option owe_transition_ifname 'owe0'

config wifi-iface 'owe0'
	option device 'radio0'
	option ifname 'owe0'
	option network 'lan'
	option mode 'ap'
	option ssid 'owe_tm.FreeNet'
	option encryption 'owe'
	option hidden '1'
	option owe_transition_ifname 'open0'

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-06-16 11:07:19 +02:00
Robert Marko
f03b20837b hostapd: fix feature detection
Fix hostapd feature detection after the bump to 2022-05-08.
getopt was not updated correctly after upstream added support for -q arg.

This reenables feature detection so that LuCi can check for features like
SAE, fast roaming etc.

Fixes: c35ff1affe ("hostapd: update to 2022-05-08")
Signed-off-by: Robert Marko <robimarko@gmail.com>
2022-06-12 23:03:36 +02:00
David Bauer
b72c7db229 hostapd: fix missing HS20 support for hostapd-full
commit c3a4cddaaf ("hostapd: remove hostapd-hs20 variant")
as well as
commit 9f1927173a ("hostapd: wpas: add missing config symbols")
indicate hostapd-full should support Hotspot 2.0 already, but only
wpa_supplicant (and wpad) do.

How this happened is not really clear, as no commit adding support for
Hotspot 2.0 is in the history.

Fix this and add Hotspot 2.0 capability to hostapd-full.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-06-08 23:17:09 +02:00
David Bauer
6ee4383350 hostapd: ubus: add bss-color to get_status
Add the current BSS color to hostapd get_status method. This field is
set to -1 in case BSS color is not active for the BSS.

Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-06-08 23:16:20 +02:00
David Bauer
6c152ce5b0 hostapd: randomize default BSS color
In case no specific BSS color is configured, set it to a random value.

Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-06-08 23:16:12 +02:00
David Bauer
c35ff1affe hostapd: update to 2022-05-08
Update hostapd to Git HEAD from 2022-05-08. This allows us to take
advantage of background radar-detection as well as BSS color collision
detection.

Suggested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-06-08 23:16:06 +02:00
Bernd Naumann
98d91e4d5e hostapd: Radius based VLANs on AP with PSK
This patch allows the user to set `auth_server` and related settings on
non WPA2 Enterprise AP modes in `/etc/config/wireless`, too, so the
Radius Attributes for Dynamic VLAN Assignment can be fetched from Radius.

Without this patch, `auth_server` and other needed options are only
written to `hostapd-phy<n>.conf` when `option encryption wpa2` is set.

`hostapd` however supports "Station MAC address -based authentication" for
non WPA Enterprise Modes, too.

A classic approch is to use `accept_mac_file` which contains MAC addr
and VLAN-ID pairs. But, using `accept_mac_file` does not support
VLAN assignment for unknown stations.

This is a sample `freeradius3` config, where a known station
("7e:a6:a7:2a:93:d2") is assigned to VLAN `65` and unknown stations are
assigned to VLAN `67`.

```
"7ea6a72a93d2" Cleartext-Password := "7ea6a72a93d2"
        Tunnel-Type = "VLAN",
        Tunnel-Medium-Type = "IEEE-802",
        Tunnel-Private-Group-Id = 65

DEFAULT Cleartext-Password := "%{User-Name}"
        Tunnel-Type = "VLAN",
        Tunnel-Medium-Type = "IEEE-802",
        Tunnel-Private-Group-Id = 67
```

Other option is to configure known stations via `accept_mac_file` and
using only Radius for unknown stations.

I tested this patch only with `wpa_key_mgmt=WPA-PSK`, and assumed that
it should work with other Encryption/Access Mode, too.

Signed-off-by: Bernd Naumann <bernd.naumann@kr217.de>
2022-06-08 16:04:04 +02:00
Stijn Tintel
d5e48a1e8e hostapd: drop wnm_disassoc_imminent
All known users of this ubus method have been updated to use the new
bss_transition_request method instead.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: David Bauer <mail@david-bauer.net>
2022-06-06 11:19:20 +03:00
Christian 'Ansuel' Marangi
419a7ad2dd uhttpd: update to latest Git HEAD
d59d732 client: fix compilation error with GCC 12
51283f9 fix compiler uninitialized variable

Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
2022-06-01 14:41:46 +02:00
Bruno Victal
0276fab649 dnsmasq: fix jail_mount for serversfile
Fix 'serversfile' option not being jail_mounted by the init script.

Signed-off-by: Bruno Victal <brunovictal@outlook.com>
2022-05-02 18:57:49 +01:00
Daniel Golle
2b5fa44f60
dnsmasq: add logfacility file to jail mounts
If logfacility is a path to a file it needs to be r/w mounted in the
sandbox as well for dnsmasq to work.

Reported-by: @iointerrupt
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-25 19:28:12 +01:00
Konstantin Demin
65256aee23 dropbear: bump to 2022.82
- update dropbear to latest stable 2022.82;
  for the changes see https://matt.ucc.asn.au/dropbear/CHANGES
- use $(AUTORELEASE) in PKG_RELEASE
- use https for all uris
- refresh all patches
- rewrite patches:
  - 100-pubkey_path.patch
  - 130-ssh_ignore_x_args.patch

binary/pkg size changes:
- ath79/generic, mips:
  - binary: 215112 -> 219228 (+4116)
  - pkg: 111914 -> 113404 (+1490)
- ath79/tiny, mips:
  - binary: 172501 -> 172485 (-16)
  - pkg: 89871 -> 90904 (+1033)

Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2022-04-09 19:31:31 +02:00
David Bauer
f6445cfa1a hostapd: add ubus link-measurements notifications
Notify external ubus subscribers of received link-measurement reports.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-04-08 01:19:29 +02:00
David Bauer
965aa33a18 hostapd: add ubus method for requesting link measurements
Add a ubus method to request link-measurements from connected STAs.

In addition to the STAs address, the used and maximum transmit power can
be provided by the external process for the link-measurement. If they
are not provided, 0 is used as the default value.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-04-08 01:19:18 +02:00
David Bauer
2ca5c3da04 hostapd: add support for enabling link measurements
Allow external processes to enable advertisement of link-measurement RRM
capability.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-04-08 01:19:10 +02:00
Valentyn Datsko
76f55e3c3f
dnsmasq: add procd interface index tracking
Problem exist when dnsmasq is exclusively bind to particular interface.
After reconfiguring or restarting this interface, its index changes, but
dnsmasq uses the old one. When this problem occurs, dnsmasq does not
listen on the correct interface so DHCP does not work, and clients do not
get an IP address. Procd netdev param can be added to restart dnsmasq when
the interface index is changed.

Signed-off-by: Valentyn Datsko <valikk.d@gmail.com>
[combined into a single &&-connected statement]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-06 17:32:42 +01:00
Felix Fietkau
64f629e207 bridger: add bridge forwarding accelerator
This package uses BPF to create a fast path which improves bridging performance
by bypassing the bridge layer. It also supports creating tc offload rules for
hardware that supports it.
Hardware offload support can be used with MT7622 + MT7915 once it is merged

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-04-06 14:13:26 +02:00
Hans Dedecker
73c6d8fd04 odhcpd: update to git HEAD
860ca90 odhcpd: Support for Option NTP and SNTP
83e14f4 router: advertise removed addresses as invalid in 3 consecutive RAs

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2022-03-22 22:03:37 +01:00
Nick Lowe
e8d048c5e0 hostapd: SAE - Enable hunting-and-pecking and H2E
Enable both the hunting-and-pecking loop and hash-to-element mechanisms
by default in OpenWRT with SAE.

Commercial Wi-Fi solutions increasingly frequently now ship with both
hunting-and-pecking and hash-to-element (H2E) enabled by default as this
is more secure and more performant than offering hunting-and-pecking
alone for H2E capable clients.

The hunting and pecking loop mechanism is inherently fragile and prone to
timing-based side channels in its design and is more computationally
intensive to perform. Hash-to-element (H2E) is its long-term
replacement to address these concerns.

For clients that only support the hunting-and-pecking loop mechanism,
this is still available to use by default.

For clients that in addition support, or were to require, the
hash-to-element (H2E) mechanism, this is then available for use.

Signed-off-by: Nick Lowe <nick.lowe@gmail.com>
2022-02-24 18:04:05 +01:00
Eneas U de Queiroz
e6df13d0e1 hostapd: fallback to psk when generating r0kh/r1kh
The 80211r r0kh and r1kh defaults are generated from the md5sum of
"$mobility_domain/$auth_secret".  auth_secret is only set when using EAP
authentication, but the default key is used for SAE/PSK as well.  In
this case,  auth_secret is empty, and the default value of the key can
be computed from the SSID alone.

Fallback to using $key when auth_secret is empty.  While at it, rename
the variable holding the generated key from 'key' to 'ft_key', to avoid
clobbering the PSK.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
[make ft_key local]
Signed-off-by: David Bauer <mail@david-bauer.net>
2022-02-19 16:14:52 +01:00
David Bauer
6f78723977 hostapd: add STA extended capabilities to get_clients
Add the STAs extended capabilities to the ubus STA information. This
way, external daemons can be made aware of a STAs capabilities.

This field is of an array type and contains 0 or more bytes of a STAs
advertised extended capabilities.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-02-19 16:14:45 +01:00
David Bauer
04ed224543 hostapd: refresh patches
Refresh patches after updating to hostapd v2.10.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-02-08 00:21:41 +01:00
David Bauer
adb8c09a83 hostapd: update to v2.10
Upstreamed patches:
020-mesh-make-forwarding-configurable.patch
e6db1bc5da3fd7d5f4dba24aa102543b4749912f
550-WNM-allow-specifying-dialog-token.patch
979f19716539362f8ce60a77bf1b88fdcf5ba8e5
720-ACS-fix-channel-100-frequency.patch
2341585c349231af00cdef8d51458df01bc6965f
741-proxyarp-fix-compilation-with-Hotspot-2.0-disabled.patch
08bdf4f90de61a84ed8f4dd918272dd9d36e2e1f

Compile-tested: wpad-wolfssl hostapd-openssl
Run-tested: ath79-generic

Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-02-08 00:21:27 +01:00
Felix Fietkau
46e0eeb760 hostapd: automatically calculate channel center freq on chan_switch
Simplifies switching to different channels when on >= VHT80

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-07 17:01:18 +01:00
Jo-Philipp Wich
881a059977 uhttpd: update to latest Git HEAD
2f8b136 main: fix leaking -p/-s argument values
881fd3b ucode: adjust to latest ucode api
8b2868e file: specify UTF-8 as charset for dirlists, add option to override
3a5bd84 main: add ucode options to help text
16aa142 examples: add ucode handler example
3ceccd0 ucode: add ucode plugin support
f0f1406 examples: add example Lua handler script
9e87095 listen: avoid invalid memory access

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-02-07 11:44:36 +01:00
David Bauer
2a31e9ca97 hostapd: add op-class to get_status output
Include the current operation class to hostapd get_status interface.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-01-14 22:12:44 +01:00
Nick Hainke
f61816fdff hostapd: refresh patchset
Recently the hostapd has undergone many changes. The patches were not refreshed.
Refreshed with
    make package/hostapd/{clean,refresh}

Refreshed:
    - 380-disable_ctrl_iface_mib.patch
    - 600-ubus_support.patch
    - 700-wifi-reload.patch
    - 720-iface_max_num_sta.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2021-12-31 12:11:59 +01:00
Raphaël Mélotte
69ce75fb12 hostapd: add fallback for WPS on stations
Up to now the WPS script triggered WPS on the stations only if it
could not trigger it successfully on any hostapd instance.

In a Multi-AP context, there can be a need (to establish a new
wireless backhaul link) to trigger WPS on the stations, regardless of
whether there is already a hostapd instance configured or not. The
current script makes it impossible, as if hostapd is running and
configured, WPS would always be triggered on hostapd only.

To allow both possibilities, the following changes are made:

- Change the "pressed" action to "release", so that we can make use of
the "$SEEN" variables (to know for how long the button was pressed).

- If the button is pressed for less than 3 seconds, keep the original
behavior.

- If the button is pressed for 3 seconds or more, trigger WPS on the
stations, regardless of the status of any running hostapd instance.

- Add comments explaining both behaviors.

- While at it, replace the usage of '-a' with a '[] && []'
construct (see [1]).

This gives users a "fallback" mechanism to onboard a device to a
Multi-AP network, even if the device already has a configured hostapd
instance running.

[1]: https://github.com/koalaman/shellcheck/wiki/SC2166

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2021-12-27 16:32:02 +00:00
David Bauer
5ca7793418 hostapd: add missing function declaration
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-12-27 03:13:36 +01:00
Felix Fietkau
5e67cd63c4 hostapd: only attempt to set qos map if supported by the driver
Fixes issues with brcmfmac

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-23 19:18:56 +01:00
Arnout Vandecappelle (Essensium/Mind)
0210f37534 hostapd: keep HE capability after channel switch in AP+STA/Mesh
The auto-ht option already kept HT and VHT support, but wasn't updated
to support HE (11ax).

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2021-12-21 22:21:38 +00:00
David Bauer
54cfe0774c hostapd: make OpenWrt statistics per-BSS
WNM and RRM statistics were incorrectly per-PHY, leading to shared
statistic counters per BSS.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-12-20 00:15:03 +01:00
David Bauer
6d1e380666 hostapd: provide BSS-transition-queries to ubus subscribers
Provide incoming BSS transition queries to ubus subscribers.

This allows external steering daemons to provide clients with
an optimal list of transition candidates.

This commit has no functional state in case no ubus subscriber is
present or it does not handle this ubus message.

To prevent hostapd from sending out a generic response by itself, a
subscribing daemon has to return a non-zero response code to hostapd.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-12-20 00:15:03 +01:00
David Bauer
dd39249f08 hostapd: WNM: allow specifying dialog-token
Backport a patch to allow extending the ubus BSS-transition method
for specifying individual dialog tokens for BSS transition
management requests.

This is required for handling BSS transition queries in the future.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-12-20 00:15:03 +01:00
David Bauer
9090e0be4d hostapd: close correct blobmsg table
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-12-16 20:27:07 +01:00
David Bauer
16bcaa71fa hostapd: add OpenWrt specific statistic counters
This adds a new struct for storing statistics not (yet) tracked by
hostapd regarding RRM and WNM activity.

These statistics can be read using the get_status hostapd interface ubus
method.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-12-15 00:13:40 +01:00
Felix Fietkau
ea49690ff4 hostapd: add support for specifying the FILS DHCP server
The 'fils_dhcp' option can be set to '*' in order to autodetect the DHCP server
For proto=dhcp networks, the discovered dhcp server will be used
For all other networks, udhcpc is called to discover the address

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-10 11:33:49 +01:00
Felix Fietkau
b7d9bced30 hostapd: add support for enabling FILS on AP and client interfaces
This is only supported with WPA-enterprise

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-10 11:33:49 +01:00
Felix Fietkau
5b66dfaf6c hostapd: enable FILS support in the full config and add build feature discovery
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-10 11:33:49 +01:00
Felix Fietkau
fbc9ce779f hostapd: make hostapd/supplicant/wpad packages depend on a specific version of hostapd-commoon
This avoids potential version mismatch between packages when upgraded
individually

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-01 16:39:12 +01:00
David Bauer
3ba9846842 hostapd: add beacon_interval to get_status ubus output
Add the beacon interval to hostapd status output. This allows external
services to discover the beacon interval for a specific VAP.

This way, external wireless management daemons can correctly calculate
fields containing TBTT value from absolute time-values.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-11-25 02:41:42 +01:00
Felix Fietkau
f84053af5c hostapd: add a patch that allows processing auth requests for peers in blocked state
If authentication fails repeatedly e.g. because of a weak signal, the link
can end up in blocked state. If one of the nodes tries to establish a link
again before it is unblocked on the other side, it will block the link to
that other side. The same happens on the other side when it unblocks the
link. In that scenario, the link never recovers on its own.

To fix this, allow restarting authentication even if the link is in blocked
state, but don't initiate the attempt until the blocked period is over.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-24 18:26:47 +01:00
Mark Mentovai
398cbb76fa
hostapd: allow hostapd under ujail to communicate with hostapd_cli
When procd-ujail is available, 1f78538387 runs hostapd as user
"network", with only limited additional capabilities (CAP_NET_ADMIN and
CAP_NET_RAW).

hostapd_cli (CONFIG_PACKAGE_hostapd-utils) communicates with hostapd
over a named UNIX-domain socket. hostapd_cli is responsible for creating
this socket at /tmp/wpa_ctrl_$pid_$counter. Since it typically runs as
root, this endpoint is normally created with uid root, gid root, mode
0755. As a result, hostapd running as uid network is able to receive
control messages sent through this interface, but is not able to respond
to them. If debug-level logging is enabled (CONFIG_WPA_MSG_MIN_PRIORITY
<= 2 at build, and log_level <= 2 in /etc/config/wireless wifi-device),
this message will appear from hostapd:

CTRL: sendto failed: Permission denied

As a fix, hostapd_cli should create the socket node in the filesystem
with uid network, gid network, mode 0770. This borrows the presently
Android-only strategy already in hostapd intended to solve the same
problem on Android.

If procd-ujail is not available and hostapd falls back to running as
root, it will still be able to read from and write to the socket even if
the node in the filesystem has been restricted to the network user and
group. This matches the logic in
package/network/services/hostapd/files/wpad.init, which sets the uid and
gid of /var/run/hostapd to network regardless of whether procd-ujail is
available.

As it appears that the "network" user and group are statically allocated
uid 101 and gid 101, respectively, per
package/base-files/files/etc/passwd and USERID in
package/network/services/hostapd/Makefile, this patch also uses a
constant 101 for the uid and gid.

Signed-off-by: Mark Mentovai <mark@moxienet.com>
[refreshed patch]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-11-23 18:53:31 +00:00
Oldřich Jedlička
1818157daa dnsmasq: fix ismounted check
Fix the return value, shell return codes should be 0 to indicate success
(i.e. mount point found), 1 should be failure (i.e. mount point not-found).

Fixes: ac4e8aa ("dnsmasq: fix more dnsmasq jail issues")
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
2021-11-23 14:57:52 +00:00
David Bauer
7ae04d3799 hostapd: fix use after free bugs
Using a pointer one lifter after it freed is not the best idea.
Let's not do that.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-11-19 21:58:12 +01:00
Eneas U de Queiroz
5720ac8f4c hostapd: set VARIANT=* for wpa-cli, hostapd-utils
19aae94 [build: avoid rebuilds of unset VARIANT packages] builds
packages defined without a VARIANT only once, using the first VARIANT
defined in the Makefile.

This caused problems with wpa-cli, as it is only built for variants that
include supplicant support, and the first VARIANT defined may not build
it.

The same happens to hostapd-utils, which is not built for
supplicant-only variants.

To circumvent this, set VARIANT=* for both packages so that they get
built for every defined variant.  This should not cause spurious
rebuilds, since tey are not a dependency of any other package defined in
this Makefile.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2021-11-15 00:38:46 +01:00
Stijn Tintel
53247d3cb4 lldpd: add reload trigger
This is needed to reload the service when calling reload_config, if the
UCI config has changed.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-11-14 21:26:41 +02:00
Stijn Tintel
d44ab665a6 lldpd: consolidate procd command lines
There is no need to have multiple lines for this.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-11-14 21:26:41 +02:00
Stijn Tintel
f054fcd98a lldpd: bump to 1.0.13
Fixes CVE-2021-43612.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-11-14 21:26:41 +02:00
Rui Salvaterra
c8340120e7 dnsmasq: fix the dynamic dns object names patch
We can't use booleans, since we're not including stdbool.h. Use integers
instead.

Fixes: 0b79e7c01e ("dnsmasq: generate the dns object name dynamically")

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-11-12 23:11:56 +01:00
Daniel Golle
0cbc6b16db
dnsmasq: add ubus acl to allow calls to hotplug.tftp object
dnsmasq may call hotplug.dhcp, hotplug.neigh and hotplug.tftp.
Only the first two callees were listed in the ACL, so add missing
hotplug.tftp.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-11-12 15:02:58 +00:00
Felix Fietkau
0b79e7c01e dnsmasq: generate the dns object name dynamically
Fixes an issue with running multiple dnsmasq instances

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-10 10:07:04 +01:00
Paul Fertser
8a6b1a8d29 dnsmasq: add match_tag for --dhcp-host
A set of tags can be specified for --dhcp-host option to restrict the
assignment to the requests which match all the tags.

Example usage:

config vendorclass
        option networkid 'udhcp'
        option vendorclass 'udhcp'

config host
        option mac '*:*:*:*:*:*'
        list match_tag 'switch.10'
        list match_tag 'udhcp'
        option ip '192.168.25.10'

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2021-11-09 16:45:38 +00:00
Felix Fietkau
d8b33dad0b dnsmasq: add support for monitoring and modifying dns lookup results via ubus
The monitoring functionality will be used for dns rule support in qosify

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-08 15:06:19 +01:00
Stijn Tintel
a05452e4d6 omcproxy: bump to git HEAD
bfba2aa groups: use uloop_timeout_remaining64

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-11-04 15:04:45 +02:00
Felix Fietkau
efff3520f4 hostapd: support qos_map_set without CONFIG_INTERWORKING
This feature is useful on its own even without full interworking support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-04 11:50:51 +01:00
Felix Fietkau
a5e3def182 hostapd: add wmm qos map set by default
This implements the mapping recommendations from RFC8325, with an
update from RFC8622. This ensures that DSCP marked packets are properly
sorted into WMM classes.
The map can be disabled by setting iw_qos_map_set to something invalid
like 'none'

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-03 22:47:55 +01:00
Eneas U de Queiroz
67f9245ee5 hostapd: avoid unnecessary package rebuilds
Package hostapd-common is a dependency of every other package defined in
hostpad Makefile.  It is currently built next to the bottom of that
Makefile's package list.

If you run make back to back, then check-compile will compare the
hostapd-common timestamp to the variant being compiled, to decide if the
varint needs to be rebuilt or not.  Since the hostapd-conf package is
built towards the end of the list, it will be newer than most of the
variants, causing unnecessary package rebuilds.

Move it to the top, so that its timestamp will be older than dependent
packages, avoiding unnecessary rebuild of every selected variant.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2021-11-01 20:18:55 +01:00
Daniel Golle
a44e4aaef9
dnsmasq: fix jail mount in case of ignore_hosts_dir being set
Commit a2fcd3900c ("dnsmasq: improve init script") broke the existing
handling for hosts_dir. Remove the redundant mount again to fix it.

Reported-by: Hartmut Birr <e9hack@gmail.com>
Fixes: a2fcd3900c ("dnsmasq: improve init script")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-11-01 12:02:24 +00:00
Daniel Golle
a2fcd3900c
dnsmasq: improve init script
* fix restart in LuCI (inherited umask was to restrictive)
 * make directory of hosts-file (!= /tmp) accessible in ujail

Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-10-31 13:07:48 +00:00
Sven Roederer
5287defa1f dropbear: add config options for agent-forwarding support
* SSH agent forwarding might cause security issues, locally and on the jump
  machine (https://defn.io/2019/04/12/ssh-forwarding/). So allow to
  completely disabling it.
* separate options for client and server
* keep it enabled by default

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
2021-10-30 16:32:54 +02:00
Michael Peleshenko
db639238f2 umdns: add missing syscall to seccomp filter
The 'madvise', syscall is missing.
Found with 'utrace /usr/sbin/umdns' on an R7800 and RT3200.

Signed-off-by: Michael Peleshenko <mpeleshenko@gmail.com>
2021-10-27 19:25:59 +01:00
Michael Peleshenko
40c18e95dc umdns: add missing syscall to seccomp filter
The 'clock_gettime64', syscall is missing.
Found with 'utrace /usr/sbin/umdns' on an R7800.

Signed-off-by: Michael Peleshenko <mpeleshenko@gmail.com>
2021-10-23 19:31:32 +02:00
David Bauer
9b880f09f3 hostapd: ubus: fix uninitialized pointer
This fixes passing a bogus non-null pointer to the ubus handler in case
the transition request is rejected.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-10-21 17:09:35 +02:00
Felix Fietkau
63c01ad025 hostapd: fix up patches after the last commit
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-21 12:37:23 +02:00
Felix Fietkau
da4be02fcd hostapd: fix a race condition on adding AP mode wds sta interfaces
Both hostapd and netifd attempt to add a VLAN device to a bridge.
Depending on which one wins the race, bridge vlan settings might be incomplete,
or hostapd might run into an error and refuse to service the client.
Fix this by preventing hostapd from adding interfaces to the bridge and
instead rely entirely on netifd handling this properly

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-21 11:31:53 +02:00
David Bauer
43c64ffa74 hostapd: fix goto loop for ubus assoc handler
When a ubus event handler denies a association with a non-zero return
value, the code jumps to preceeding code, creating an endless loop until
the event handler accepts the assc request.

Move the ubus handler further up the code to avoid creating such a loop.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-10-19 17:27:05 +02:00
David Bauer
0eed96ca5d hostapd: ubus: add BSS transtiton request method
The existing wnm_disassoc_imminent ubus method only supports issuing a
bss transition request with the disassoc imminent flag set.
For use-cases, where the client is requested to roam to another BSS
without a pending disassoc, this existing method is not suitable.

Add a new bss_transition_request ubus method, which provides a more
universal way to dispatch a transition request. It takes the following
arguments:

Required:
addr: String - MAC-address of the STA to send the request to (colon-seperated)

Optional:
abridged - Bool - Indicates if the abridged flag is set
disassociation_imminent: Bool - Whether or not the disassoc_imminent
                         flag is set
disassociation_timer: I32 - number of TBTTs after which the client will
                      be disassociated
validity_period: I32 - number of TBTTs after which the beacon
                 candidate list (if included) will be invalid
neighbors: blob-array - Array of strings containing neighbor reports as
           hex-string

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-10-13 22:55:45 +02:00
David Bauer
a3de42e72c hostapd: ubus: add notification for BSS transition response
To allow steering daemons to be aware of the STA-decided transition
target, publish WNM transition responses to ubus. This way, steerings
daemons can learn about STA-chosen targets and send a better selection
of transition candidates.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-10-13 22:55:06 +02:00
Ronny Kotzschmar
72bfc35f8f umdns: add missing syscalls to seccomp filter
The 'mmap', 'mmap2', 'munmap' syscalls are missing.
Found with 'utrace /usr/sbin/umdns'.

Signed-off-by: Ronny Kotzschmar <ro.ok@me.com>
2021-10-07 23:21:59 -10:00
Paul Fertser
ed7769aa40 dnsmasq: add explicit "set:" for client-matching options
Bring the usage in line with the dnsmasq man page and the other options
where set: is mandatory.

No functional change.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2021-10-03 21:48:16 +02:00
Jesus Fernandez Manzano
5269c47e8d hostapd: fix segfault when deinit mesh ifaces
In hostapd_ubus_add_bss(), ubus objects are not registered for mesh
interfaces. This provokes a segfault when accessing the ubus object in
mesh deinit.

This commit adds the same condition to hostapd_ubus_free_bss() for
discarding those mesh interfaces.

Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
2021-09-24 12:32:19 +02:00
Felix Fietkau
17d19a7d43 hostapd: let netifd set bridge port attributes for snooping
Avoids race conditions on bridge member add/remove

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-09-21 19:43:20 +02:00
Felix Fietkau
ef24475658 ustp: update to the latest version
c62d85cf7a0d bridge: check port bpdu filter status and apply it to the config
25555611be91 libnetlink: turn rtnetlink error answers into debug msgs
462b3a491347 build: use pthread cflags/ldflags

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-09-21 19:43:20 +02:00
Etan Kissling
02a2b44eab dnsmasq: add config option for connmark DNS filtering
This adds uci support to configure connmark based DNS filtering.

Signed-off-by: Etan Kissling <etan_kissling@apple.com>
(imported from upstream mailing list
https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2021q2/015151.html)
Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
2021-09-14 20:56:20 +02:00
Etan Kissling
d2d0044ebf dnsmasq: Update to version 2.86
Summary of upstream CHANGELOG:
* Handle DHCPREBIND requests in the DHCPv6 server code.
* Fix bug which caused dnsmasq to lose track of processes forked.
* Major rewrite of the DNS server and domain handling code.
* Revise resource handling for number of concurrent DNS queries.
* Improve efficiency of DNSSEC.
* Connection track mark based DNS query filtering.
* Allow smaller than 64 prefix lengths in synth-domain.
* Make domains generated by --synth-domain appear in replies
  when in authoritative mode.
* Ensure CAP_NET_ADMIN capability is available when
  conntrack is configured.
* When --dhcp-hostsfile --dhcp-optsfile and --addn-hosts are
  given a directory as argument, define the order in which
  files within that directory are read.
* Support some wildcard matching of input tags to --tag-if.

Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
2021-09-14 20:38:59 +02:00
David Bauer
ec2078e3ef hostapd: enable proxy-arp support for hostapd-full
The hostapd.sh script already has support for configuring proxy-ARP,
however no built variant has support for it enabled.

Enable proxy-ARP support for hostapd-full builds in order to allow users
to actually use this feature.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-08-28 01:31:15 +02:00
David Bauer
7073e88a76 hostapd: fix Proxy-ARP with Hotspot 2.0 disabled
The disable_dgaf config fiels is only available in case Hostapd is
compiled with Hotspot 2.0 support, however Proxy-ARP does not depend on
Hotspot 2.0.

Only add the code related to this config field when Hotspot 2.0 is
enabled to fix compilation with the aformentioned preconditions.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-08-28 01:31:15 +02:00
David Bauer
99786e121b hostapd: refresh patches
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-08-28 01:31:15 +02:00
Felix Fietkau
3ebbf795df ustp: add OpenWrt STP/RSTP daemon
This integrates with netifd in order to provide STP/RSTP protocol support
in user space. It defaults to using RSTP for bridges with stp enabled.
This daemon has no config files, it uses the configuration passed from
netifd via ubus

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-08-26 13:27:27 +02:00
Felix Fietkau
c26d741d07 hostapd: enable ht40 in wpa_supplicant when using wider HE modes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-08-24 17:35:45 +02:00
Stijn Tintel
6393ea1581 uhttpd: add config option for json_script
Add a config option for json_script instead of unconditionally including
all json files in /etc/uhttpd in every uhttpd instance. This makes it
possible to configure a single instance with an unconditional redirect,
which currently renders all other uhttpd instances unusable.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Felix Fietkau <nbd@nbd.name>
2021-08-24 14:45:42 +03:00
Hans Dedecker
c0afe3a5d2 odhcpd: update to latest git HEAD
01b4e60 dhcpv4: fix uninitialized hostname in some ubus events
1666769 dhcpv6-ia: allow up to 64 bit wide hostid

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2021-08-23 21:53:13 +02:00
Stijn Tintel
31d984a96e lldpd: bump to 1.0.12
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-08-22 18:07:20 +03:00
Fritz D. Ansel
65ee14a118 dropbear: allow to use with xinetd
with xinetd allowed+blocked (ipv6) hosts could be set
what is not possible with stock dropbear package

The file size increased 12 Bytes, so this "opimisation" did not really helped.
Within a compressed storage format it is 0..

ipk: 111.171 -> 111.361 = 190 bytes
bin: 215.128 -> 215.140 =  12 bytes

Signed-off-by: Fritz D. Ansel <fdansel@yandex.ru>
2021-08-21 15:59:39 +02:00
Felix Fietkau
8b7517465b hostapd: fix broken check in radar detection notification
This check was accidentally left in after reworking the code,
causing a segfault

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-08-11 19:01:09 +02:00
Jesus Fernandez Manzano
af83e3ce0f hostapd: respect fixed channel BW in HE20 mode
When using htmode 'HE20' with a radio mode that uses wpa-supplicant
(like mesh or sta), it will default to 40 MHz bw if disable_ht40 is not
set. This commit fixes this behaviour.

Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
2021-08-08 19:50:46 +02:00
Daniel Golle
ddc8d085f3
dnsmasq: reset EXTRA_MOUNT in the right place
EXTRA_MOUNT variable should be reset in dnsmasq_start() rather than
just once at the beginning of the script.

Fixes: ac4e8aa2f8 ("dnsmasq: fix more dnsmasq jail issues")
Reported-by: Hartmut Birr <e9hack@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-01 15:06:57 +01:00
Daniel Golle
ac4e8aa2f8
dnsmasq: fix more dnsmasq jail issues
* remove superflus mounts of /dev/null and /dev/urandom
 * reset EXTRA_MOUNTS at the beginning of the script
 * add mount according to ignore_hosts_dir
 * don't add mount for file which is inside a directory already in the
   EXTRA_MOUNTS list

Fixes: 59c63224e1 ("dnsmasq: rework jail mounts")
Reported-by: Hartmut Birr <e9hack@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-01 11:35:31 +01:00
Daniel Golle
59c63224e1
dnsmasq: rework jail mounts
* split into multiple lines to improve readability
 * use EXTRA_MOUNT for addnhosts instead of blindly adding /tmp/hosts
 * remove no longer needed mount for /sbin/hotplug-call
 * add dhcp-script.sh dependencies (jshn, ubus)

Fixes: 3a94c2ca5c ("dnsmasq: add /tmp/hosts/ to jail_mount")
Fixes: aed95c4cb8 ("dnsmasq: switch to ubus-based hotplug call")
Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-01 03:47:43 +01:00
Felix Fietkau
f1b98fa4fa hostapd: add missing chunk for the snoop interface fix
Fixes: 7b46377a0c ("hostapd: make the snooping interface (for proxyarp) configurable")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-28 12:41:36 +02:00
Felix Fietkau
ae1c5d0d6a hostapd: make proxyarp work with libnl-tiny
Remove a dependency on libnl3-route

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-28 05:55:11 +02:00
Felix Fietkau
5dd1bd5b80 hostapd: fix a segfault on sta disconnect with proxy arp enabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-28 05:55:11 +02:00
Felix Fietkau
7b46377a0c hostapd: make the snooping interface (for proxyarp) configurable
Use the VLAN interface instead of the bridge, to ensure that hostapd receives
untagged DHCP packets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-28 05:55:11 +02:00
Nick Hainke
3a94c2ca5c dnsmasq: add /tmp/hosts/ to jail_mount
Programs like the olsr-name-plugin write hostname files to "/tmp/hosts/".
If you don't add this to the jail_mount, dnsmasq can't read it anymore.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2021-07-19 13:11:23 +01:00
Hans Dedecker
033d5ff25e odhcpd: fix invalid DHCPv6 ADVERTSIE with small configured leasetime (FS#3935)
bc9d317 dhcpv6-ia: fix invalid preferred lifetime

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2021-07-18 19:34:10 +02:00
Felix Fietkau
9ec5f5f230 hostapd: add "force" parameter for channel switch
This will restart the interface in case the CSA fails and can be used to
force the device on a DFS channel (including full CAC)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-15 10:46:10 +02:00
Felix Fietkau
8f7e6db230 hostapd: fix uninitialized stack variable on CSA
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-12 13:34:08 +02:00
Felix Fietkau
da2c244e8c hostapd: initialize ht/vht/he mode on channel switch by default
Use the current mode, but allow overwriting via ubus command parameters

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-12 13:33:56 +02:00
Felix Fietkau
1ec4af4151 hostapd: add support for enabling HE on channel switch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-12 13:33:47 +02:00
Felix Fietkau
9aa0561534 hostapd: make it possible to update station airtime weights via ubus
This allows dynamic tuning based on other runtime information

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-12 13:31:40 +02:00
David Bauer
b0483b19f9 hostapd: add HE flag to get_clients
Expose the hostapd HE flag via ubus to indicate HE capable devices.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-07-06 02:27:06 +02:00
Martin Weinelt
cde154c871 hostapd: remove unused mac_buff allocation
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
2021-07-06 02:26:44 +02:00
Martin Weinelt
398df62756 hostapd: report bssid, ssid and channel over ubus
Imports a function from iw to convert frequencies to channel numbers.

Co-authored-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
[fix potential out of bounds read]
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-07-06 02:26:38 +02:00
Kevin Darbyshire-Bryant
e4cfefa9fc dnsmasq: use local option for local domain parameter
'--local' is a synonym for '--server' so let's use '--local' in the
resultant config file for uci's 'local' instead of uci's local
parameter being turned into '--server'.  Slightly less confusion all
round.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-07-05 16:49:06 +01:00
Etan Kissling
ba5bd8e556 dnsmasq: distinct Ubus names for multiple instances
Currently, when using multiple dnsmasq instances they are all assigned
to the same Ubus instance name. This does not work, as only a single
instance can register with Ubus at a time. In the log, this leads to
`Cannot add object to UBus: Invalid argument` error messages.
Furthermore, upstream 3c93e8eb41952a9c91699386132d6fe83050e9be changes
behaviour so that instead of the log, dnsmasq exits at start instead.

With this patch, all dnsmasq instances are assigned unique names so that
they can register with Ubus concurrently. One of the enabled instances
is always assigned the previous default name "dnsmasq" to avoid breaking
backwards compatibility with other software relying on that default.
Previously, a random instance got assigned that name (while the others
produced error logs). Now, the first unnamed dnsmasq config section is
assigned the default name. If there are no unnamed dnsmasq sections the
first encountered named dnsmasq config section is assigned instead.

A similar issue exists for Dbus and was similarly addressed.

Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
[tweaked commit message] dnsmasq was not crashing it is exiting
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-06-29 11:27:26 +01:00
Kevin Darbyshire-Bryant
76cc8a036c Revert "dnsmasq: Update to version 2.86test3"
This reverts commit 3628870015.

dnsmasq v2.86test3 has some issues with ubus, so is being reverted.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-06-26 20:31:29 +01:00
Kevin Darbyshire-Bryant
2a9d7ecd27 Revert "dnsmasq: add config option for connmark DNS filtering"
This reverts commit dea4bae7c2.

dnsmasq v2.86test3 has some issues with ubus and needs reverting, hence
this needs reverting.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-06-26 20:30:58 +01:00
Etan Kissling
dea4bae7c2 dnsmasq: add config option for connmark DNS filtering
This adds uci support to configure connmark based DNS filtering.

Signed-off-by: Etan Kissling <etan_kissling@apple.com>
(See https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2021q2/015151.html)
Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
2021-06-26 13:28:47 +01:00
Etan Kissling
3628870015 dnsmasq: Update to version 2.86test3
Need this version to add config option for connmark DNS filtering.

Summary of upstream CHANGELOG:
* Handle DHCPREBIND requests in the DHCPv6 server code.
* Fix bug which caused dnsmasq to lose track of processes forked.
* Major rewrite of the DNS server and domain handling code.
* Revise resource handling for number of concurrent DNS queries.
* Improve efficiency of DNSSEC.
* Connection track mark based DNS query filtering.

Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
2021-06-26 13:28:08 +01:00
Felix Fietkau
1818b038d7 hostapd: add support for providing vendor specific IE elements
They can be added as hex digit strings via the 'vendor_elements' option

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-24 15:56:46 +02:00
Raphaël Mélotte
acdb7c38c6 hostapd: add default_disabled option to the supplicant
With the default configuration we generate, the supplicant starts
scanning and tries to connect to any open network when the interface
is enabled.

In some cases it can be desirable to prevent the supplicant from
scanning by itself. For example, if on the same radio an AP is
configured and an unconfigured STA is added (to be configured with
WPS), the AP might not be able to beacon until the STA stops
scanning.

In such a case, the STA configuration can still be required to set
specific settings (e.g. multi_ap_backhaul_sta) so it can't be set to
"disabled" in uci (because that would prevent the supplicant from
being run at all). The alternative is to add the "disabled" parameter
to the default network block in the supplicant configuration.

This patch adds a "default_disabled" setting in UCI which, when set,
adds the "disabled" parameter to the supplicant default network block.

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2021-06-23 14:52:16 -10:00
Timo Sigurdsson
bf98faaac8 hostapd: make wnm_sleep_mode_no_keys configurable
In the aftermath of the KRACK attacks, hostapd gained an AP-side workaround
against WNM-Sleep Mode GTK/IGTK reinstallation attacks. WNM Sleep Mode is not
enabled by default on OpenWrt, but it is configurable through the option
wnm_sleep_mode. Thus, make the AP-side workaround configurable as well by
exposing the option wnm_sleep_mode_no_keys. If you use the option
wpa_disable_eapol_key_retries and have wnm_sleep_mode enabled, you might
consider using this workaround.

Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
2021-06-22 11:10:06 -10:00
Timo Sigurdsson
85ce590705 hostapd: fix handling of the channel utilization options
Commit 0a7657c ("hostapd: add channel utilization as config option") added the
two new uci options bss_load_update_period and chan_util_avg_period. However,
the corresponding "config_add_int" calls for these options weren't added, so
attempting to actually use these options and change their values is bound to
fail - they always stay at their defaults. Add the missing code to actually
make these options work.

Fixes: 0a7657c ("hostapd: add channel utilization as config option")
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
2021-06-21 19:04:06 -10:00
Timo Sigurdsson
9f09c1936a hostapd: make country3 option configurable
The country3 option in hostapd.conf allows the third octet of the country
string to be set. It can be used e.g. to indicate indoor or outdoor use (see
hostapd.conf for further details). Make this option configurable but optional
in OpenWrt.

Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
2021-06-21 19:02:33 -10:00
Michael Yartys
b9b4aef4f2 hostapd: add support for setting sae_pwe
Make it possible to specify the SAE mechanism for PWE derivation. The
following values are possible:

0 = hunting-and-pecking loop only
1 = hash-to-element only
2 = both hunting-and-pecking loop and hash-to-element enabled

hostapd currently defaults to hunting-and-pecking loop only.

Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
2021-06-20 15:42:52 -10:00
Dobroslaw Kijowski
bb2ac5a33b hostapd: stop advertising 11w feature
This is a follow up of 1a9b896d ("treewide: nuke DRIVER_11W_SUPPORT").
LuCI commit ab010406 ("luci-mod-network: skip check for 802.11w feature")
skips check of the 11w feature [1]. Now advertising it in hostapd is
superfluous so stop doing it.

[1]: https://github.com/openwrt/luci/pull/4689

Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
[remove outdated PKG_RELEASE bump and update to SPDX]
Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-06-20 14:11:30 -10:00
Martin Schiller
2c6c1501af uhttpd: make organization (O=) of the cert configurable via uci
Make the organization (O=) of the cert configurable via uci. If not
configured, use a combination of "OpenWrt" and an unique id like it was
done before.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2021-06-20 13:50:36 -10:00
Rosen Penev
3dabb62581 treewide: remove PKG_INSTALL from CMake packages
It's already default with cmake.mk

Found with:

git grep PKG_INSTALL\: | cut -d ':' -f 1 | sort -u > ins
git grep cmake.mk | cut -d ':' -f 1 > cmake
comm -1 -2 ins cmake

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-06-19 20:44:59 -10:00
Hans Dedecker
6ed0ddde05 odhcpd: update to latest git HEAD
564d25e config: fix ra_flags none setting

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2021-06-13 22:28:40 +02:00
Rosen Penev
09de28090c package: fix cmake packages build with ninja
+= is needed for CMAKE_OPTIONS.

mt76 needs Ninja disabled as the kernel stuff uses normal make.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-06-12 10:46:39 +02:00
Felix Fietkau
305c1b8d74 hostapd: configure inter-AP communication interface for 802.11r
In setups using VLAN bridge filtering, hostapd may need to communicate using
a VLAN interface on top of the bridge, instead of using the bridge directly

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-05 06:53:29 +02:00
Felix Fietkau
89bd8607f8 hostapd: fix bringing up vlan interfaces with the no-bridge option
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-04 20:36:42 +02:00
Hans Dedecker
4fd4e9997a odhcpd: update to git HEAD
a12fcb3 config: log config parse failures to syslog
ebd4297 cmake: enforce additonal compiler checks
405da32 odhcpd: fix extra compiler warning

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2021-06-03 21:07:42 +02:00
John Crispin
96e9c81aab hostapd: fix radius problem due to invalid attributes
The offending commit caused the configuration file to contain:
  radius_auth_req_attr=
  radius_acct_req_attr=
which cause hostapd to add an ATTR of type 0 into the messages.

hostapd: RADIUS message: code=4 (Accounting-Request) identifier=0 length=93
hostapd:    Attribute 40 (Acct-Status-Type) length=6
hostapd:       Value: 7
hostapd:    Attribute 30 (Called-Station-Id) length=28
hostapd:       Value: 'C4-41-1E-F5-2D-55:OpenWifi'
hostapd:    Attribute 61 (NAS-Port-Type) length=6
hostapd:       Value: 19
hostapd:    Attribute 0 (?Unknown?) length=3    <----------------
hostapd:    Attribute 55 (Event-Timestamp) length=6
hostapd:       Value: 1622726457
hostapd:    Attribute 41 (Acct-Delay-Time) length=6
hostapd:       Value: 0
hostapd:    Attribute 44 (Acct-Session-Id) length=18
hostapd:       Value: '9B5961E7235AAEC6'

Fixes: 3bd6c8c728 (hostapd: add additional radius options)
Signed-off-by: John Crispin <john@phrozen.org>
2021-06-03 16:00:51 +02:00
John Crispin
98621c9782 hostapd: add eap_server support
This makes it possible to avoid using a RADIUS server for WPA enterprise authentication

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-02 09:33:12 +02:00
Felix Fietkau
704ab6a002 hostapd: add default values for r0kh/r1kh
This allows WPA enterprise roaming in the same mobility domain without any
manual key configuration (aside from radius credentials)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-02 09:33:12 +02:00
Felix Fietkau
ec223cf724 hostapd: add support for specifying the maxassoc parameter as a device option
It allows enforcing a limit on associated stations to be enforced for the
full device, e.g. in order to deal with hardware/driver limitations

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-02 09:33:12 +02:00
Felix Fietkau
e309b57619 hostapd: add support for configuring proxy ARP
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-02 09:33:12 +02:00
Felix Fietkau
190d4b6184 hostapd: add configurable rssi thresholds for rejecting assoc/probe requests
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-02 09:33:12 +02:00
Felix Fietkau
46509a51dd hostapd: add support for configuring the beacon rate
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-02 09:33:12 +02:00
Adrian Schmutzler
54cc1756e2 hostapd: update to version 2021-05-22
This update only adds one commit:
b102f19bcc53 tests: Opportunistic Wireless Encryption - SA Query

The main reason for the bump is to have a newer PKG_SOURCE_DATE,
so we can reset PKG_RELEASE to 1 (this has not been done for the
most recent bump), and replace it with AUTORELEASE.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-29 00:31:25 +02:00
Felix Fietkau
962d530dea hostapd: support verbose build using V=sc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-27 12:17:02 +02:00
David Bauer
553cc47ec7 hostapd: ACS: fix channel 100 frequency
Channel 100 is a valid channel to choose for 80MHz operation. However,
it's assigned to 5500 MHz, not 5550MHz. In fact, there is no channel
assigned to this frequency.

Fix this obbvious typo to allow ACS to select channel 100 for 80 MHz
operation again.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-05-26 23:12:09 +02:00
Felix Fietkau
d87b58bb09 hostapd: fix adding back stations after a missed deauth/disassoc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
eefed841b0 hostapd: update to version 2021-05-21
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
26da5c2359 hostapd: add support for configuring rts threshold
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
2319cf4ec0 hostapd: fix max_oper_chwidth setting for HE
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
John Crispin
3bd6c8c728 hostapd: add additional radius options
- add functionality to configure RADIUS NAS-Id and Operator-Name
- add functionality to configure RADIUS accounting interval
- enable RADIUS "Chargeable User Identity"

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
c76f1d8330 hostapd: add extra options for hotspot 2.0 / interworking
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
753a91d1d1 hostapd: report radar detected events via ubus
Events are reported on all BSS interfaces

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
8e2ca15726 hostapd: improve channel switch support
Instead of requiring the user to call it on each BSS individually,
run it on all BSSs internally.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
33c69aee41 hostapd: add missing inline stubs for ubus vlan event support
Only used when building without ubus support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
John Crispin
937dd79e2a hostapd: fix civic location option
Signed-off-by: John Crispin <john@phrozen.org>
2021-05-26 11:48:14 +02:00
David Bauer
ddcb970274 hostapd: wolfssl: add RNG to EC key
Since upstream commit 6467de5a8840 ("Randomize z ordinates in
scalar mult when timing resistant") WolfSSL requires a RNG for
the EC key when built hardened which is the default.

Set the RNG for the EC key to fix connections for OWE clients.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-05-21 15:44:05 +02:00
Felix Fietkau
cf45caeff1 hostapd: add patch for disabling automatic bridging of vlan interfaces
netifd is responsible for handling that, except if the vlan bridge
was provided by the config

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-18 12:52:52 +02:00
Felix Fietkau
2d89d7c748 hostapd: add ubus notifications for adding/removing vlan interfaces
This can be used to handle network configuration of dynamically created vlan
interfaces in a more flexible way

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-18 12:52:52 +02:00
Stijn Tintel
844598dcbb umdns: bump to git HEAD
777a0b service: fix compilation with GCC 10

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-05-16 03:59:54 +03:00
Leonardo Mörlein
b993b68b6c build: introduce $(MKHASH)
Before this commit, it was assumed that mkhash is in the PATH. While
this was fine for the normal build workflow, this led to some issues if

    make TOPDIR="$(pwd)" -C "$pkgdir" compile

was called manually. In most of the cases, I just saw warnings like this:

    make: Entering directory '/home/.../package/gluon-status-page'
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    [...]

While these were only warnings and the package still compiled sucessfully,
I also observed that some package even fail to build because of this.

After applying this commit, the variable $(MKHASH) is introduced. This
variable points to $(STAGING_DIR_HOST)/bin/mkhash, which is always the
correct path.

Signed-off-by: Leonardo Mörlein <me@irrelefant.net>
2021-05-13 15:13:15 +02:00
Alan Swanson
3980daffa4 dnsmasq: Update to version 2.85
Fixes issue with merged DNS requests in 2.83/2.84 not being
retried on the firsts failed request causing lookup failures.

Also fixes the following security problem in dnsmasq:
* CVE-2021-3448:
  If specifiying the source address or interface to be used
  when contacting upstream name servers such as:
  server=8.8.8.8@1.2.3.4, server=8.8.8.8@1.2.3.4#66 and
  server=8.8.8.8@eth0 then all would use the same socket
  bound to the explicitly configured port. Now only
  server=8.8.8.8@1.2.3.4#66 will use the explicitly
  configured port and the others random source ports.

Remove upstreamed patches and update remaining patch.

Signed-off-by: Alan Swanson <reiver@improbability.net>
[refreshed old runtime support patch]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-05-05 09:19:46 +01:00
João Henriques
e8a5670122 dnsmasq: add ignore hosts dir to dnsmasq init script
When running multiple instances of dnsmasq, for example one being for the lan
and another for a guest network, it might not be desirable to have the same dns names
configured in both networks

Signed-off-by: João Henriques <joaoh88@gmail.com>
2021-04-24 21:35:27 +02:00
Daniel Golle
00a85a1634
umdns: add missing syscalls to seccomp filter
Looks like 'openat', 'pipe2' and 'ppoll' are now needed, possibly due
to changes on libraries used by umdns now using slightly different
calls.

Found using
/etc/init.d/umdns trace
now use umdns, ie. cover all ubus call etc., then
/etc/init.d/umdns stop
find list of syscalls traced in /tmp/umdns.*.json

Fixes: FS#3355 ("UMDNS: does not start on master with seccomp")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-04-10 17:36:03 +01:00
Stijn Tintel
bcdf600fc5 lldpd: further size reductions
Size difference on mips_4kec:
Before: 120196
After:  120006

Closes https://github.com/openwrt/openwrt/pull/3823

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Suggested-by: Lucian Cristian <lucian.cristian@gmail.com>
2021-04-05 18:50:17 +03:00
Stijn Tintel
e4d7e7b3e4 lldpd: enable LTO
Size difference on mips_4kec:
W/o LTO: 139674
W/ LTO:  120196

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Suggested-by: Lucian Cristian <lucian.cristian@gmail.com>
2021-04-05 18:50:11 +03:00
Stijn Tintel
8946be0ab5 lldpd: bump to 1.0.9
Contains fixes related to CVE-2020-27827.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-04-05 18:27:42 +03:00
Stijn Tintel
c935c6ffb6 lldpd: add libcap dependency
Now that libcap is in OpenWrt base, we can drop our custom patch to
disable libcap support and have lldpd depend on it instead. This will
allow the monitor process to drop its privileges instead of running as
root, improving security.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-04-05 18:20:48 +03:00
Rui Salvaterra
d38f456582 hostapd: enable airtime policy for the -basic variants
Airtime policy configuration is extremely useful in multiple BSS scenarios.
Since nowadays most people configure both private and guest networks (at
least), it makes sense to enable it by default, except for the most limited
of the variants.

Size of the hostapd-basic-openssl binary (mipsel 24Kc -O2):
543944 bytes (airtime policy disabled)
548040 bytes (airtime policy enabled)

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
2021-04-03 18:57:13 +02:00
Jan Pavlinec
abbaf696f6 igmpproxy: remove package
Moved to packages repo because it was considered
non-essential for most router configurations.

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
[shorten commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-21 22:45:20 +01:00
Hauke Mehrtens
1170655f8b uhttpd: update to git HEAD
15346de client: Always close connection with request body in case of error

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-21 22:34:13 +01:00
Hauke Mehrtens
501221af54 uhttpd: Execute uci commit and reload_config once
Instead of doing uci commit and reload_config for each setting do it
only once when one of these options was changed. This should make it a
little faster when both conditions are taken.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-21 22:16:32 +01:00
Hauke Mehrtens
d25d281fd6 uhttpd: Reload config after uhttpd-mod-ubus was added
Without this change the config is only committed, but the uhttpd daemon
is not reloaded. This reload is needed to apply the config. Without the
reload of uhttpd, the ubus server is not available over http and returns
a Error 404.

This caused problems when installing luci on the snapshots and
accessing it without reloading uhttpd.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-21 22:16:31 +01:00
Daniel Golle
d28880cdd8
umdns: add syscalls needed on Aarch64
Now that ujail supports seccomp also on Aarch64, add missing syscall
'fstat' to the list of allowed syscalls.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-19 22:33:33 +00:00