Commit Graph

5 Commits

Author SHA1 Message Date
Daniel Golle
e497c975d3 ramips: mt76x8: add support for Yuncore M300
Hardware:
 - SoC: MediaTek MT7628DAN (MIPS 580MHz)
 - Flash: 8 MiB Spansion S25FL064K
 - RAM: 64 MiB (built-into SoC)
 - WLAN: 2.4 GHz (MT7628)
 - Ethernet: 1x 10/100 Mbps WAN, 1x 10/100 LAN (MT7628)
 - Buttons: 1 Reset button
 - LEDs: 1x Red, 1x Green
 - Serial console: unpopulated header, 57600 8n1 (RX only)
 - Power: 12 VDC, 1 A

There are unpopulated areas on the board for 5 GHz WiFi via PCIe as well
as (most likely) Quectel EG25-G 4G module. As both are not populated on
my board support for both is missing for now.

Installation:
The installation can be done via the recovery HTTP server which is built
into the bootloader. Hold down the reset button while connecting the
device to power and keep holding a bit more than 3 seconds. Connect to
http://192.168.188.253/ and upload sysupgrade.bin file.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-15 03:19:30 +01:00
Shiji Yang
5f250cfd04 ramips: gpio: convert to the generic GPIO driver
Drop most of the code in favor of the generic MMIO GPIO driver.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-07-04 22:20:47 +02:00
Shiji Yang
ccd50abd9f ramips: add back the gdma driver
The gdma driver has been removed from the upstream. Let's move it
to the local files. This patch also removed unsupported compatible
string and sub-target.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-05-29 10:41:49 +02:00
Mieczyslaw Nalewaj
093a5aab40 ramips: 6.6: refresh kernel config
Refresh kernel config.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-05 07:58:15 +02:00
Mieczyslaw Nalewaj
7bd44e0a30 kernel/ramips: Create kernel files for v6.6 (from v6.1)
This is an automatically generated commit.

During a `git bisect` session, `git bisect --skip` is recommended.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-05 07:58:15 +02:00