Commit Graph

17238 Commits

Author SHA1 Message Date
Hans Dedecker
96586ad8ca netifd: update to latest git HEAD
55a7b6b netifd: vxlan: add aging and maxaddress options
11223f5 netifd: vxlan: add most missing boolean options
226566b netifd: vxlan: refactor mapping of boolean attrs
a3c033e netifd: vxlan: handle srcport range

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-09-12 21:29:20 +02:00
Adrian Schmutzler
07aa858a73 ramips: fix partitions and boot for RAVPower RP-WD03
The RAVPower RP-WD03 is a battery powered router, with an Ethernet and
USB port. Due due a limitation in the vendor supplied U-Boot bootloader,
we cannot exceed a 1.5 MB kernel size, as is the case with recent builds
(i.e. post v19.07). This breaks both factory and sysupgrade images.

To address this, use the lzma loader (loader-okli) to work around this
limitation.

The improvements here also address the "misplaced" U-Boot environment
partition, which is located between the kernel and rootfs in the stock
image / implementation. This is addressed by making use of mtd-concat,
maximizing space available in the booted image.
This will make sysupgrade from earlier versions impossible.

Changes are based on the recently supported HooToo HT-TM05, as the
hardware is almost identical (except for RAM size) and is from the same
vendor (SunValley). While at it, also change the SPI frequency
accordingly.

Installation:

 - Download the needed OpenWrt install files, place them in the root
   of a clean TFTP server running on your computer. Rename the files as,
   - openwrt-ramips-mt7620-ravpower_rp-wd03-squashfs-kernel.bin => kernel
   - openwrt-ramips-mt7620-ravpower_rp-wd03-squashfs-rootfs.bin => rootfs
 - Plug the router into your computer via Ethernet
 - Set your computer to use 10.10.10.254 as its IP address
 - With your router shut down, hold down the power button until the first
   white LED lights up.
 - Push and hold the reset button and release the power button. Continue
   holding the reset button for 30 seconds or until it begins searching
   for files on your TFTP server, whichever comes first.
 - The router (10.10.10.128) will look for your computer at 10.10.10.254
   and install the two files. Once it has finished installation, it will
   automatically reboot and start up OpenWrt.
 - Set your computer to use DHCP for its IP address

Notes:

 - U-Boot environment can be modified, u-boot-env is preserved on initial
   install or sysupgrade
 - mtd-concat functionality is included, to leave a "hole" for u-boot-env,
   combining the OEM kernel and rootfs partitions

Most of the changes in this commit are the work of Russell Morris (as
credited below), I only wrapped them up and added compat-version.
Thanks to @mpratt14 and @xabolcs for their help getting the lzma loader
to work!

Fixes: 5ef79af4f8 ("ramips: add support for Ravpower WD03")

Suggested-by: Russell Morris <rmorris@rkmorris.us>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-11 19:31:03 +02:00
David Bauer
e289f18347 hostapd: add support for per-BSS airtime configuration
Add support for per-BSS airtime weight configuration. This allows to set
a airtime weight per BSS as well as a ratio limit based on the weight.

Support for this feature is only enabled in the full flavors of hostapd.

Consult the hostapd.conf documentation (Airtime policy configuration)
for more information on the inner workings of the exposed settings.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-09-11 17:35:48 +02:00
David Bauer
e087bb5bd7 base-files: disable LEDs if default state is undefined
Set the default state for LEDs to off. When a trigger is set, the
trigger will turn the LED automatically on.

Currently LEDs might stay on, e.g. when the LED trigger is set to a
netdev trigger and the interface is never activated or the 'none'
trigger is selected without setting the 'default' option to 0 and it's
set for the LED indicating the system running state.

Using off as a default value is also consistent with the documentation
in the OpenWrt wiki.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-09-11 17:34:54 +02:00
Bob Cai
f1bc66c765 kernel: improve the description of fs-nfs-v4
TITLE is "NFS4 filesystem client support" (Line 428)
but the description is "Kernel module for NFS v4 support" (Line 438).

Use "Kernel module for NFS v4 client support" on line 438.

Signed-off-by: Bob Cai <1119283622@qq.com>
[commit title/message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-10 18:52:15 +02:00
Rafał Miłecki
8b8015031b rpcd: update to the latest master
rc: new ubus object for handling /etc/init.d/ scripts

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2020-09-10 13:35:05 +02:00
Daniel Golle
fb22f4ae3a rssileds: update maintainer email address
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-09-10 02:58:30 +01:00
Jason A. Donenfeld
bf0881dc72 wireguard-tools: bump to 1.0.20200827
* ipc: split into separate files per-platform

This is in preparation for FreeBSD support, which I had hoped to have this
release, but we're still waiting on some tooling fixes, so hopefully next
wg(8) will support that. Either way, the code base is now a lot more amenable
to adding more kernel platform support.

* man: wg-quick: use syncconf instead of addconf for strip example

Simple documentation fix.

* pubkey: isblank is a subset of isspace
* ctype: use non-locale-specific ctype.h

In addition to ensuring that isalpha() and such isn't locale-specific, we also
make these constant time, even though we're never distinguishing between bits
of a secret using them. From that perspective, though, this is markedly better
than the locale-specific table lookups in glibc, even though base64 characters
span two cache lines and valid private keys must hit both. This may be useful
for other projects too: https://git.zx2c4.com/wireguard-tools/tree/src/ctype.h

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2020-09-09 20:47:19 +02:00
Martin Schiller
d6235f48f8 openvpn: fix shell compare operator in openvpn.init
Don't use bash syntax, because /bin/sh is used here.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
[bump PKG_RELEASE]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-09 14:02:21 +02:00
Felix Fietkau
d717343c85 mac80211: update encap offload patches to the latest version
Minor cleanup and code reorganization, along with a change to not disable
offload anymore when a tkip or sw crypto key is added

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-09 11:51:47 +02:00
Jason A. Donenfeld
d8104c8353 wireguard: bump to 1.0.20200908
* compat: backport kfree_sensitive and switch to it
* netlink: consistently use NLA_POLICY_EXACT_LEN()
* netlink: consistently use NLA_POLICY_MIN_LEN()
* compat: backport NLA policy macros

Backports from upstream changes.

* peerlookup: take lock before checking hash in replace operation

A fix for a race condition caught by syzkaller.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2020-09-09 07:54:20 +02:00
Daniel Golle
be9694aaa2 hostapd: add UCI support for Hotspot 2.0
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-09-08 20:04:14 +01:00
Daniel Golle
7ed34f65d0 netifd: update to git HEAD
3d9bd73 utils: fix check_pid_path to work with deleted file as well
 330f403 vlan: initialize device ifname earlier at creation time
 c057e71 device: do not check state from within device_init
 cb0c07b system-dummy: fix resolving ifindex
 ccd9ddc bridge: add support for turning on vlan_filtering
 82bcb64 bridge: add support for adding vlans to a bridge
 0e8cea0 bridge: add support for VLAN filtering
 6086b63 config: enable bridge vlan filtering by default for bridges that define VLANs
 ac0710b device: look up full device name before traversing vlan chain
 e32e21e bridge: flush vlan list on bridge free
 645ceed interface-ip: clear host bits of the device prefix
 d7b614a netifd-wireless: parse 'osen' encryption

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-09-08 20:04:14 +01:00
Paul Spooren
d0f295837a dropbear: Enable Ed25519 for normal devices
The Ed25519 key pairs are much shorter than RSA pairs and are supported
by default in OpenSSH. Looking at websites explaining how to create new
SSH keys, many suggest using Ed25519 rather than RSA, however consider
the former as not yet widely established. OpenWrt likely has a positive
influence on that development.

As enabling Ed25519 is a compile time option, it is currently not
possible to install the feature via `opkg` nor select that option in an
ImageBuilder.

Due to the size impact of **12kB** the option should only be enabled for
devices with `!SMALL_FLASH`.

This approach seems cleaner than splitting `dropbear` into two packages
like `dropbear` and `dropbear-ed25519`.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-09-06 23:19:20 +02:00
Rosen Penev
83e946d718 util-linux: Fix build when libmagic is present
When the libmagic from the file package in the packages feed was also
compiled and provided its libmagic.so file, util-linux tried to link
against it. Avoid this by explicitly disable libmagic support.

This fixes the following build error:
Package more is missing dependencies for the following libraries:
libmagic.so.1

Fixes: 36d9ed360a ("util-linux: update to 2.36")
Acked-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[Add commit description]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-09-06 23:19:12 +02:00
Hauke Mehrtens
787de4331f wolfssl: Activate link time optimization (LTO)
The ipk sizes for mips_24Kc change like this:
old:
libwolfssl24_4.5.0-stable-1_mips_24kc.ipk	391.545

new:
libwolfssl24_4.5.0-stable-2_mips_24kc.ipk	387.439

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-09-06 20:30:51 +02:00
Hauke Mehrtens
b71433f42d iw: Update to version 5.8
The ipk sizes for mips_24Kc change like this:
old:
iw_5.4-1_mips_24kc.ipk		35.767
iw-full_5.4-1_mips_24kc.ipk	68.423

new:
iw_5.8-1_mips_24kc.ipk		36.883
iw-full_5.8-1_mips_24kc.ipk	71.992

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-09-06 20:30:51 +02:00
Hauke Mehrtens
103225b412 nftables: Activate link time optimization (LTO)
The ipk sizes for mips_24Kc change like this:
old:
nftables-json_0.9.6-1_mips_24kc.ipk	231.968
nftables-nojson_0.9.6-1_mips_24kc.ipk	204.731

new:
nftables-json_0.9.6-2_mips_24kc.ipk	221.894
nftables-nojson_0.9.6-2_mips_24kc.ipk	193.932

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-09-06 20:30:18 +02:00
Hauke Mehrtens
56c2e9fe37 libnftnl: Activate link time optimization (LTO)
The ipk sizes for mips_24Kc change like this:
old:
libnftnl12_1.1.7-1_mips_24kc.ipk	47.459

new:
libnftnl12_1.1.7-2_mips_24kc.ipk	45.742

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-09-06 20:30:18 +02:00
Hauke Mehrtens
a617861d4c jansson: Activate link time optimization (LTO)
The ipk sizes for mips_24Kc change like this:
old:
jansson4_2.13.1-1_mips_24kc.ipk	19.171

new:
jansson4_2.13.1-2_mips_24kc.ipk	18.936

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-09-06 20:30:18 +02:00
Hauke Mehrtens
13b4ed4cf4 nftables: Update to version 0.9.6
The ipk sizes for mips_24Kc change like this:
old:
nftables-json_0.9.3-1_mips_24kc.ipk	220.262
nftables-nojson_0.9.3-1_mips_24kc.ipk	192.937

new:
nftables-json_0.9.6-1_mips_24kc.ipk	231.968
nftables-nojson_0.9.6-1_mips_24kc.ipk	204.731

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-09-06 20:30:18 +02:00
Hauke Mehrtens
082354e4bb libnftnl: Update to version 1.1.7
The ipk sizes for mips_24Kc change like this:
old:
libnftnl12_1.1.5-1_mips_24kc.ipk	46.252

new:
libnftnl12_1.1.7-1_mips_24kc.ipk	47.459

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-09-06 20:30:18 +02:00
Hauke Mehrtens
cd2aad3812 jansson: Update to version 2.13.1
This also sets the ABI_VERSION as this is a versioned shared library.

The ipk sizes for mips_24Kc change like this:
old:
jansson_2.12-1_mips_24kc.ipk	18.692

new:
jansson4_2.13.1-1_mips_24kc.ipk	19.171

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-09-06 20:30:18 +02:00
Adrian Schmutzler
081e944be6 ath25: add back target support
Discussion on the mailing list reveals that this target has active
users. As we are finally able to upgrade this target to kernel 5.4,
add it back to master.

This reverts commit 7d29a55714 ("ath25: drop target") and
immediately moves the relevant files to 5.4, without touching
the content.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-06 19:49:05 +02:00
Christian Lamparter
a487e67cbc base-files: support label-property-less in get_dt_leds
The LED's "label" property has been deprecated in upstream by:

|commit c5d18dd6b64e09dd6984bda9bdd55160af537a8c
|Author: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|Date:   Sun Jun 9 20:19:04 2019 +0200
|
|    dt-bindings: leds: Add properties for LED name construction
|
|    Introduce dedicated properties for conveying information about
|    LED function and color. Mark old "label" property as deprecated.
|
|    Additionally function-enumerator property is being provided
|    for the cases when neither function nor color can be used
|    for LED differentiation.

in order to be somewhat prepared, this patch adds a fallback
as a last resort to make the current led code work by falling
back to the node-name as the "label".

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-09-05 23:24:46 +02:00
Hans Dedecker
04e0e4167e ppp: update to latest git HEAD
af30be0 Fix setting prefix for IPv6 link-local addresss
0314df4 Disable asking password again when prompt program returns 128

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-09-05 20:13:40 +02:00
David Bauer
7f676b5ed6 firewall: bump to latest HEAD
8c2f9fa fw3: zones: limit zone names to 11 bytes
78d52a2 options: fix parsing of boolean attributes

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-09-05 15:43:16 +02:00
Felix Fietkau
acf1733496 mac80211: add preliminary support for enabling 802.11ax in config
No advanced features are configurable yet, just basic enabling of HE modes

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-04 15:49:35 +02:00
Daniel Golle
c2c701e058 libselinux: package executables into -utils
Add new package libselinux-utils containing the executable
utilities included with libselinux.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-09-04 02:50:20 +01:00
Russell Morris
45a81f7056 ramips: add support for HooToo HT-TM05
The HooToo HT-TM05 is a battery powered router, with an Ethernet and USB port.
Vendor U-Boot limited to 1.5 MB kernel size, so use lzma loader (loader-okli).

Specifications:

  SOC:     MediaTek MT7620N
  BATTERY: 10400mAh
  WLAN:    802.11bgn
  LAN:     1x 10/100 Mbps Ethernet
  USB:     1x USB 2.0 (Type-A)
  RAM:     64 MB
  FLASH:   GigaDevice GD25Q64, Serial 8 MB Flash, clocked at 50 MHz
           Flash itself specified to 80 MHz, but speed limited by mt7620 SPI
           fast-read enabled (m25p)
  LED:     Status LED (blue after boot, green with WiFi traffic
           4 leds to indicate power level of the battery (unable to control)
  INPUT:   Power, reset button

MAC assignment based on vendor firmware:

  2.4 GHz    *:b4   (factory 0x04)
  LAN/label  *:b4   (factory 0x28)
  WAN        *:b5   (factory 0x2e)

Tested and working:

 - Ethernet
 - 2.4 GHz WiFi (Correct MAC-address)
 - Installation from TFTP (recovery)
 - OpenWRT sysupgrade (Preserving and non-preserving), through the usual
   ways: command line and LuCI
 - LEDs (except as noted above)
 - Button (reset)
 - I2C, which is needed for reading battery charge status and level
 - U-Boot environment / variables (from U-Boot, and OpenWrt)

Installation:

 - Download the needed OpenWrt install files, place them in the root
   of a clean TFTP server running on your computer. Rename the files as,
   - ramips-mt7620-hootoo_tm05-squashfs-kernel.bin => kernel
   - ramips-mt7620-hootoo_tm05-squashfs-rootfs.bin => rootfs
 - Plug the router into your computer via Ethernet
 - Set your computer to use 10.10.10.254 as its IP address
 - With your router shut down, hold down the power button until the first
   white LED lights up.
 - Push and hold the reset button and release the power button. Continue
   holding the reset button for 30 seconds or until it begins searching
   for files on your TFTP server, whichever comes first.
 - The router (10.10.10.128) will look for your computer at 10.10.10.254
   and install the two files. Once it has finished installation, it will
   automatically reboot and start up OpenWrt.
 - Set your computer to use DHCP for its IP address

Notes:

 - U-Boot environment can be modified, u-boot-env is preserved on initial
   install or sysupgrade
 - mtd-concat functionality is included, to leave a "hole" for u-boot-env,
   combining the OEM kernel and rootfs partitions

I would like to thank @mpratt14 and @xabolcs for their help getting the
lzma loader to work!

Signed-off-by: Russell Morris <rmorris@rkmorris.us>
[drop changes in image/Makefile, fix indent and PKG_RELEASE in
uboot-envtools, fix LOADER_FLASH_OFFS, minor commit message facelift,
add COMPILE to Device/Default]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-03 14:15:30 +02:00
Rosen Penev
7a5e4f5f00 policycoreutils: add nls.mk
Fixes compilation under uClibc-ng.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-09-03 00:33:20 +01:00
Adrian Schmutzler
6362a04725 kernel: remove obsolete kernel version switches for 4.14
This removes switches dependent on kernel version 4.14 as well as
several packages/modules selected only for that version.

This also removes sched-cake-virtual, which is not required anymore
now that we have only one variant of cake.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-02 16:29:23 +02:00
Adrian Schmutzler
bc88ee0aff samsung: drop target
This target is still on kernel 4.14, and no attempt has been made to
update it to a newer kernel. Since we already are two LTS versions ahead
of that the target is dropped, as the chance of somebody bumping it will
only decrease with time.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-02 16:29:22 +02:00
Adrian Schmutzler
7d29a55714 ath25: drop target
This target still only works with kernel 4.14, and not so recent
attempts of getting newer kernel versions supported did not lead
to success. Therefore, drop the target, as we are already two
LTS kernel versions ahead and it does not seem like anybody will
pick up the work.

Patchwork series:
https://patchwork.ozlabs.org/project/openwrt/list/?series=169991&state=*

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-02 16:29:22 +02:00
Magnus Kroken
66893063ab mbedtls: update to 2.16.8
This release of Mbed TLS provides bug fixes and minor enhancements. This
release includes fixes for security issues and the most notable of them
are described in more detail in the security advisories.

* Local side channel attack on RSA and static Diffie-Hellman
* Local side channel attack on classical CBC decryption in (D)TLS
* When checking X.509 CRLs, a certificate was only considered as revoked
if its revocationDate was in the past according to the local clock if
available.

Full release announcement:
https://github.com/ARMmbed/mbedtls/releases/tag/v2.16.8

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2020-09-02 15:12:12 +02:00
Walter Sonius
46abcb3ade base-files: fix comment typo in lib/functions/network.sh
Fix typo in comment.

Signed-off-by: Walter Sonius <walterav1984@gmail.com>
[commit title/message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-02 01:11:17 +02:00
Daniel Golle
80a194b100 hostapd: add hs20 variant
Add hostapd variant compiled with support for Hotspot 2.0 AP features.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-09-01 21:37:35 +01:00
Felix Fietkau
91fb3ce56b mac80211: remove an obsolete patch that is no longer doing anything useful
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-01 17:01:56 +02:00
Felix Fietkau
2c14710c54 mac80211: add more AQL fixes/improvements
Fix aggregation length estimation, add HE and VHT160 support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-01 17:01:56 +02:00
Daniel Golle
76368a5c0a refpolicy: skip building docs
Building docs requires xmllint and other bulky things being present on
the host. Skip that.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-09-01 14:35:00 +01:00
Daniel Golle
d136848b8b libaudit: add host-build required by policycoreutils/host
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-09-01 14:24:07 +01:00
Daniel Golle
3ce21b8797 libsemanage: host-build depends on renamed libaudit package
Fixes: efdf619f21 ("audit: build only libaudit")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-09-01 12:32:52 +01:00
Hauke Mehrtens
413fdc6676 ugps: update to the latest version
511a5b3 ugps: fix 64-bit time_t

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-09-01 13:04:44 +02:00
Hauke Mehrtens
db8e09f1c2 fstools: update to the latest version
5345343 fstoools: add define for GLOB_ONLYDIR

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-09-01 13:01:15 +02:00
John Crispin
2ddd8387a7 uboot-mediatek: update to latest version
Signed-off-by: John Crispin <john@phrozen.org>
2020-09-01 09:08:52 +02:00
Daniel Golle
93ed51e5b6 libaudit: drop unused file
Drop init script from libaudit package. It will be added to the
'audit' package in the packages feed.

Fixes: efdf619f21 ("audit: build only libaudit")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-09-01 00:32:54 +01:00
Paul Spooren
395ac4d018 build: opkg-key variable key folder
The key folder is used by `opkg` and `usign` to store and retrieve
trusted public keys. Using `opkg-key` outside a running device is
unfeasible as the key folder is hard coded to `/etc/opkg/keys`.

This commit adds a variable OPKG_KEYS which defaults to `/etc/opkg/keys`
if unset, however allows set arbitrary key folder locations.

Arbitrary key folder locations are useful to add signature verification
to the ImageBuilders.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-08-31 22:44:26 +01:00
Paul Spooren
18b1cc2838 px5g-wolfssl: cleanup Makefile and SPDX license
Minor cosmetic cleanups of the Makefile and add a SPDX compatible
license headers.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-08-31 22:29:37 +01:00
Daniel Golle
2e2425ce7f libsemanage: add missing package metadata
License and CPE-ID were missing, add them.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-08-31 22:02:12 +01:00
Daniel Golle
efdf619f21 audit: build only libaudit
Turns out auditd depends on libev. Lets have that in packages.git.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-08-31 21:51:45 +01:00