ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-21 06:33:41 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
54,499 Commits 9 Branches 75 Tags 905 MiB
807483d336
Commit Graph

439 Commits

Author SHA1 Message Date
Hauke Mehrtens
bc64ca15d4 kernel: kmod-net-rtl8192su: Remove package 
The R8712U driver depends on cfg80211. cfg80211 is provided by mac80211
backports, we can not build any in kernel drivers which depend on
cfg80211 which is an out of tree module in OpenWrt.

The cfg80211 dependency was added with kernel 5.9.

We could add rtl8192su to backports and build it from there.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 7ebe1dca47)
 2022-12-15 00:45:28 +01:00
Giammarco Marzano
3e15a54bb0 ipq40xx: Add ZTE MF289F 
It's a 4G Cat.20 router used by Vodafone Italy (called Vodafone FWA)
and Vodafone DE\T-Mobile PL (called GigaCube).

Modem is a MiniPCIe-to-USB based on Snapdragon X24,
it supports 4CA aggregation.

There are currently two hardware revisions, which
differ on the 5Ghz radio:

AT1 = QCA9984 5Ghz Radio on PCI-E bus
AT2 = IPQ4019 5Ghz Radio inside IPQ4019 like 2.4Ghz

Device specification
--------------------
SoC Type: Qualcomm IPQ4019
RAM: 256 MiB
Flash: 128 MiB SPI NAND (Winbond W25N01GV)
ROM: 2MiB SPI Flash (GD25Q16)
Wireless 2.4 GHz (IP4019): b/g/n, 2x2
Wireless 5 GHz:
	(QCA9984): a/n/ac, 4x4 HW REV AT1
	(IPA4019): a/n/ac, 2x2 HW REV AT2
Ethernet: 2xGbE (WAN/LAN1, LAN2)
USB ports: No
Button: 2 (Reset/WPS)
LEDs: 3 external leds: Network (white or red), Wifi, Power and 1 internal (blue)
Power: 12 VDC, 1 A
Connector type: Barrel
Bootloader: U-Boot

Installation
------------
1. Place OpenWrt initramfs image for the device on a TFTP
   in the server's root. This example uses Server IP: 192.168.0.2
2. Connect serial console (115200,8n1) to serial connector
   GND (which is right next to the thing with MF289F MIMO-V1.0), RX, TX
   (refer to this image: https://ibb.co/31Gngpr).
3. Connect TFTP server to RJ-45 port (WAN/LAN1).
4. Stop in u-Boot (using ESC button) and run u-Boot commands:

setenv serverip 192.168.0.2
setenv ipaddr 192.168.0.1
set fdt_high 0x85000000
tftp openwrt-ipq40xx-generic-zte_mf289f-initramfs-fit-zImage.itb
bootm $loadaddr

5. Please make backup of original partitions, if you think about revert to
   stock, specially mtd16 (Web UI) and mtd17 (rootFS).
Use /tmp as temporary storage and do:

WEB PARITION
--------------------------------------
cat /dev/mtd16 > /tmp/mtd16.bin
scp /tmp/mtd16.bin root@YOURSERVERIP:/
rm /tmp/mtd16.bin

ROOT PARITION
--------------------------------------
cat /dev/mtd17 > /tmp/mtd17.bin
scp /tmp/mtd17.bin root@YOURSERVERIP:/
rm /tmp/mtd17.bin

6. Login via ssh or serial and remove stock partitions
   (default IP 192.168.0.1):

 # this can return an error, if ubi was attached before
 # or rootfs part was erased before.
ubiattach -m 17

 # it could return error if rootfs part was erased before
ubirmvol /dev/ubi0 -N ubi_rootfs
 # some devices doesn't have it
ubirmvol /dev/ubi0 -N ubi_rootfs_data

7. download and install image via sysupgrade -n
 (either use wget/scp to copy the mf289f's squashfs-sysupgrade.bin
 to the device's /tmp directory)

 sysupgrade -n /tmp/openwrt-...-zte_mf289f-squashfs-sysupgrade.bin

Sometimes it could print ubi attach error, but please ignore it
if process goes forward.

Flash Layout

NAND:
mtd8: 000a0000 00020000 "fota-flag"
mtd9: 00080000 00020000 "0:ART"
mtd10: 00080000 00020000 "mac"
mtd11: 000c0000 00020000 "reserved2"
mtd12: 00400000 00020000 "cfg-param"
mtd13: 00400000 00020000 "log"
mtd14: 000a0000 00020000 "oops"
mtd15: 00500000 00020000 "reserved3"
mtd16: 00800000 00020000 "web"
mtd17: 01d00000 00020000 "rootfs"
mtd18: 01900000 00020000 "data"
mtd19: 03200000 00020000 "fota"
mtd20: 0041e000 0001f000 "kernel"
mtd21: 0101b000 0001f000 "ubi_rootfs"

SPI:
mtd0: 00040000 00010000 "0:SBL1"
mtd1: 00020000 00010000 "0:MIBIB"
mtd2: 00060000 00010000 "0:QSEE"
mtd3: 00010000 00010000 "0:CDT"
mtd4: 00010000 00010000 "0:DDRPARAMS"
mtd5: 00010000 00010000 "0:APPSBLENV"
mtd6: 000c0000 00010000 "0:APPSBL"
mtd7: 00050000 00010000 "0:reserved1"

Back to Stock (!!! need original dump taken from initramfs !!!)
-------------
1. Place mtd16.bin and mtd17.bin initramfs image
   for the device on a TFTP in the server's root.
   This example uses Server IP: 192.168.0.2
2. Connect serial console (115200,8n1) to serial console
   connector (refer to the pin-out from above).
3. Connect TFTP server to RJ-45 port (WAN/LAN1).
4. rename mtd16.bin to web.img and mtd17.bin to root_uImage_s
5. Stop in u-Boot (using ESC button) and run u-Boot commands:

This will erase RootFS+Web:
nand erase 0x1000000 0x800000
nand erase 0x1800000 0x1D00000

This will restore RootFS:
tftpboot 0x84000000 ${dir}root_uImage_s
nand erase 0x1800000 0x1D00000
nand write $fileaddr 0x1800000 $filesize

This will restore Web Interface:
tftpboot 0x84000000 ${dir}web.img
nand erase 0x1000000 0x800000
nand write $fileaddr 0x1000000 $filesize

After first boot on stock firwmare, do a factory reset.
Push reset button for 5 seconds so all parameters will
be reverted to the one printed on label on bottom of the router

Signed-off-by: Giammarco Marzano <stich86@gmail.com>
Reviewed-by: Lech Perczak <lech.perczak@gmail.com>
(Warning: commit message did not conform to UTF-8 - hopefully fixed?,
added description of the pin-out if image goes down, reformatted
commit message to be hopefully somewhat readable on git-web,
redid some of the gpio-buttons & leds DT nodes, etc.)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 0de6a3339f)

[Backported to 22.03: added DTS to the makefile patch, fixed ipq-wifi
inclusion for MF286D]
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
 2022-11-05 22:49:43 +01:00
Christian Lamparter
e5ab159fbf firmware: intel-microcode: update to 20220809 
Debian's changelog by Henrique de Moraes Holschuh <hmh@debian.org>:

  * New upstream microcode datafile 20220809
    * Fixes INTEL-SA-00657, CVE-2022-21233
      Stale data from APIC leaks SGX memory (AEPIC leak)
    * Fixes unspecified errata (functional issues) on Xeon Scalable
    * Updated Microcodes:
      sig 0x00050653, pf_mask 0x97, 2022-03-14, rev 0x100015e, size 34816
      sig 0x00050654, pf_mask 0xb7, 2022-03-08, rev 0x2006e05, size 44032
      sig 0x000606a6, pf_mask 0x87, 2022-04-07, rev 0xd000375, size 293888
      sig 0x000706a1, pf_mask 0x01, 2022-03-23, rev 0x003c, size 75776
      sig 0x000706a8, pf_mask 0x01, 2022-03-23, rev 0x0020, size 75776
      sig 0x000706e5, pf_mask 0x80, 2022-03-17, rev 0x00b2, size 112640
      sig 0x000806c2, pf_mask 0xc2, 2022-03-19, rev 0x0028, size 97280
      sig 0x000806d1, pf_mask 0xc2, 2022-03-28, rev 0x0040, size 102400
      sig 0x00090672, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064
      sig 0x00090675, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064
      sig 0x000906a3, pf_mask 0x80, 2022-06-15, rev 0x0421, size 216064
      sig 0x000906a4, pf_mask 0x80, 2022-06-15, rev 0x0421, size 216064
      sig 0x000a0671, pf_mask 0x02, 2022-03-17, rev 0x0054, size 103424
      sig 0x000b06f2, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064
      sig 0x000b06f5, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit bb73828b89)
 2022-10-03 19:51:50 +02:00
Nick Hainke
0c9833d0e0 wireless-regdb: update to 2022-08-12 
Changes:
9dc9c89 wireless-regdb: update regulatory database based on preceding changes
442bc25 wireless-regdb: update 5 GHz rules for PK and add 60 GHz rule
daee7f3 wireless-regdb: add 5 GHz rules for GY

Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 1d2d69c810)
 2022-09-17 23:25:50 +02:00
Christian Lamparter
f2c12b8940 layerscape: update PKG_HASH / PKG_MIRROR_HASH 
The change of the PKG_VERSION caused the hash of the package to
change. This is because the PKG_VERSION is present in the
internal directory structure of the archive.

Fixes: 038d5bdab1 ("layerscape: use semantic versions for LSDK")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit e879cccaa2)
(cherry picked from commit d4391ef073)
 2022-07-23 00:11:21 +02:00
Christian Lamparter
479890083d firmware: intel-microcode: update to 20220510 
Debians' changelog by Henrique de Moraes Holschuh <hmh@debian.org>:

 * New upstream microcode datafile 20220419
  * Fixes errata APLI-11 in Atom E3900 series processors
  * Updated Microcodes:
    sig 0x000506ca, pf_mask 0x03, 2021-11-16, rev 0x0028, size 16384

 * New upstream microcode datafile 20220510
  * Fixes INTEL-SA-000617, CVE-2022-21151:
    Processor optimization removal or modification of security-critical
    code may allow an authenticated user to potentially enable information
    disclosure via local access (closes: #1010947)
  * Fixes several errata (functional issues) on Xeon Scalable, Atom C3000,
    Atom E3900
  * New Microcodes:
    sig 0x00090672, pf_mask 0x03, 2022-03-03, rev 0x001f, size 212992
    sig 0x00090675, pf_mask 0x03, 2022-03-03, rev 0x001f, size 212992
    sig 0x000906a3, pf_mask 0x80, 2022-03-24, rev 0x041c, size 212992
    sig 0x000906a4, pf_mask 0x80, 2022-03-24, rev 0x041c, size 212992
    sig 0x000b06f2, pf_mask 0x03, 2022-03-03, rev 0x001f, size 212992
    sig 0x000b06f5, pf_mask 0x03, 2022-03-03, rev 0x001f, size 212992
  * Updated Microcodes:
    sig 0x00030679, pf_mask 0x0f, 2019-07-10, rev 0x090d, size 52224
    sig 0x000406e3, pf_mask 0xc0, 2021-11-12, rev 0x00f0, size 106496
    sig 0x00050653, pf_mask 0x97, 2021-11-13, rev 0x100015d, size 34816
    sig 0x00050654, pf_mask 0xb7, 2021-11-13, rev 0x2006d05, size 43008
    sig 0x00050656, pf_mask 0xbf, 2021-12-10, rev 0x4003302, size 37888
    sig 0x00050657, pf_mask 0xbf, 2021-12-10, rev 0x5003302, size 37888
    sig 0x0005065b, pf_mask 0xbf, 2021-11-19, rev 0x7002501, size 29696
    sig 0x000506c9, pf_mask 0x03, 2021-11-16, rev 0x0048, size 17408
    sig 0x000506e3, pf_mask 0x36, 2021-11-12, rev 0x00f0, size 109568
    sig 0x000506f1, pf_mask 0x01, 2021-12-02, rev 0x0038, size 11264
    sig 0x000606a6, pf_mask 0x87, 2022-03-30, rev 0xd000363, size 294912
    sig 0x000706a1, pf_mask 0x01, 2021-11-22, rev 0x003a, size 75776
    sig 0x000706a8, pf_mask 0x01, 2021-11-22, rev 0x001e, size 75776
    sig 0x000706e5, pf_mask 0x80, 2022-03-09, rev 0x00b0, size 112640
    sig 0x000806a1, pf_mask 0x10, 2022-03-26, rev 0x0031, size 34816
    sig 0x000806c1, pf_mask 0x80, 2022-02-01, rev 0x00a4, size 109568
    sig 0x000806c2, pf_mask 0xc2, 2021-12-07, rev 0x0026, size 97280
    sig 0x000806d1, pf_mask 0xc2, 2021-12-07, rev 0x003e, size 102400
    sig 0x000806e9, pf_mask 0x10, 2021-11-12, rev 0x00f0, size 105472
    sig 0x000806e9, pf_mask 0xc0, 2021-11-12, rev 0x00f0, size 105472
    sig 0x000806ea, pf_mask 0xc0, 2021-11-12, rev 0x00f0, size 105472
    sig 0x000806eb, pf_mask 0xd0, 2021-11-15, rev 0x00f0, size 105472
    sig 0x000806ec, pf_mask 0x94, 2021-11-17, rev 0x00f0, size 105472
    sig 0x00090661, pf_mask 0x01, 2022-02-03, rev 0x0016, size 20480
    sig 0x000906c0, pf_mask 0x01, 2022-02-19, rev 0x24000023, size 20480
    sig 0x000906e9, pf_mask 0x2a, 2021-11-12, rev 0x00f0, size 108544
    sig 0x000906ea, pf_mask 0x22, 2021-11-15, rev 0x00f0, size 104448
    sig 0x000906eb, pf_mask 0x02, 2021-11-12, rev 0x00f0, size 105472
    sig 0x000906ec, pf_mask 0x22, 2021-11-15, rev 0x00f0, size 104448
    sig 0x000906ed, pf_mask 0x22, 2021-11-16, rev 0x00f0, size 104448
    sig 0x000a0652, pf_mask 0x20, 2021-11-16, rev 0x00f0, size 96256
    sig 0x000a0653, pf_mask 0x22, 2021-11-15, rev 0x00f0, size 97280
    sig 0x000a0655, pf_mask 0x22, 2021-11-16, rev 0x00f0, size 96256
    sig 0x000a0660, pf_mask 0x80, 2021-11-15, rev 0x00f0, size 96256
    sig 0x000a0661, pf_mask 0x80, 2021-11-16, rev 0x00f0, size 96256
    sig 0x000a0671, pf_mask 0x02, 2022-03-09, rev 0x0053, size 103424

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 2747a94f09)
 2022-07-17 14:28:31 +02:00
Robert Marko
3e38bd1353 ipq-wifi: remove packaged BDF-s for MikroTik devices 
Since we now provide the BDF-s for MikroTik IPQ40xx devices on the fly,
there is noneed to include package and ship them like we do now.

This also resolves the performance issues that happen as MikroTik
changes the boards and ships them under the same revision but they
actually ship with and require a different BDF.

Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit ab141a6e2c)
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
 2022-07-01 12:46:45 +02:00
Stijn Tintel
267f86a7b2 wireless-regdb: bump to 2022.06.06 
902b321 wireless-regdb: Update regulatory rules for Israel (IL)
  20f6f34 wireless-regdb: add missing spaces for US S1G rules
  25652b6 wireless-regdb: Update regulatory rules for Australia (AU)
  081873f wireless-regdb: update regulatory database based on preceding changes
  166fbdd wireless-regdb: add db files missing from previous commit
  e3f03f9 Regulatory update for 6 GHz operation in Canada (CA)
  888da5f Regulatory update for 6 GHz operation in United States (US)
  647bcaa Regulatory update for 6 GHz operation in FI
  c6b079d wireless-regdb: update regulatory rules for Bulgaria (BG) on 6GHz
  2ed39be wireless-regdb: Remove AUTO-BW from 6 GHz rules
  7a6ad1a wireless-regdb: Unify 6 GHz rules for EU contries
  68a8f2f wireless-regdb: update regulatory database based on preceding changes

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit e3e9eb31a2)
 2022-06-27 19:54:12 +02:00
David Bauer
f765f2f114 ipq40xx: add Aruba AP-365 specific BDF 
Aruba deploys a BDF in the root filesystem, however this matches the one
used for the DK04 reference board.

The board-specific BDFs are built into the kernel. The AP-365 shows
sinificant degraded performance with increased range when used with the
reference BDF.

Replace the BDF with the one extracted from Arubas kernel.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit b21b98627d)
 2022-06-02 17:01:22 +02:00
Enrico Mioso
3a974b5bcd ipq40xx: fix BDF file for pcie wifi chip on the GL.Inet GL-B2200 
After the switch to pre-calibration, ath10k would fail to initialize
the PCIE Wi-Fi on the GL-B200 as follows:

ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
[...]
ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200 from ath10k/QCA9888/hw2.0/board-2.bin
ath10k_pci 0000:01:00.0: failed to fetch board-2.bin or board.bin from ath10k/QCA9888/hw2.0
ath10k_pci 0000:01:00.0: failed to fetch board file: -12
ath10k_pci 0000:01:00.0: could not probe fw (-12)

Repackage the BDF file after renaming relevant fields and files to
allow for the Wi-Fi interface to start again.

Fixes: 80d34d9d59 ("ipq40xx: document pcie wifi chip on the GL.Inet GL-B2200")
CC: Christian Lamparter <chunkeey@gmail.com>
CC: Robert Marko <robimarko@gmail.com>
Reviewed-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
(cherry picked from commit e3f9af4fb6)
 2022-05-02 21:25:46 +02:00
Hauke Mehrtens
d86980eab2 linux-firmware: Update to version 20220411 
The following files used in OpenWrt changed:
 amd64-microcode/lib/firmware/amd-ucode/microcode_amd_fam17h.bin
 amd64-microcode/lib/firmware/amd-ucode/microcode_amd_fam19h.bin
 amdgpu-firmware/lib/firmware/amdgpu/aldebaran_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/aldebaran_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/aldebaran_rlc.bin
 amdgpu-firmware/lib/firmware/amdgpu/aldebaran_sdma.bin
 amdgpu-firmware/lib/firmware/amdgpu/aldebaran_smc.bin
 amdgpu-firmware/lib/firmware/amdgpu/aldebaran_sos.bin
 amdgpu-firmware/lib/firmware/amdgpu/aldebaran_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/aldebaran_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/arcturus_sdma.bin
 amdgpu-firmware/lib/firmware/amdgpu/beige_goby_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/beige_goby_dmcub.bin
 amdgpu-firmware/lib/firmware/amdgpu/beige_goby_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/beige_goby_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/beige_goby_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/beige_goby_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/beige_goby_rlc.bin
 amdgpu-firmware/lib/firmware/amdgpu/beige_goby_sdma.bin
 amdgpu-firmware/lib/firmware/amdgpu/beige_goby_smc.bin
 amdgpu-firmware/lib/firmware/amdgpu/beige_goby_sos.bin
 amdgpu-firmware/lib/firmware/amdgpu/beige_goby_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/beige_goby_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/dcn_3_1_6_dmcub.bin
 amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_dmcub.bin
 amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_rlc.bin
 amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_sdma.bin
 amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_smc.bin
 amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_sos.bin
 amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_rlc.bin
 amdgpu-firmware/lib/firmware/amdgpu/green_sardine_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/green_sardine_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/green_sardine_dmcub.bin
 amdgpu-firmware/lib/firmware/amdgpu/green_sardine_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/green_sardine_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/green_sardine_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/green_sardine_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/green_sardine_rlc.bin
 amdgpu-firmware/lib/firmware/amdgpu/green_sardine_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/green_sardine_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi10_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi10_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi10_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi10_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi10_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi10_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi10_sos.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi10_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi10_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi12_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi12_sdma.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi12_sdma1.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi12_sos.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi12_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi12_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi14_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi14_smc.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi14_sos.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi14_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/navi14_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_dmcub.bin
 amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_rlc.bin
 amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_sdma.bin
 amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_smc.bin
 amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_sos.bin
 amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/picasso_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/picasso_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/picasso_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/picasso_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/picasso_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/picasso_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/picasso_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/picasso_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/psp_13_0_8_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/psp_13_0_8_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/psp_13_0_8_toc.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven2_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven2_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven2_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven2_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven2_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven2_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven2_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven2_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/raven_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/renoir_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/renoir_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/renoir_dmcub.bin
 amdgpu-firmware/lib/firmware/amdgpu/renoir_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/renoir_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/renoir_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/renoir_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/renoir_rlc.bin
 amdgpu-firmware/lib/firmware/amdgpu/renoir_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/renoir_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/sdma_5_2_7.bin
 amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_dmcub.bin
 amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_rlc.bin
 amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_sdma.bin
 amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_smc.bin
 amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_sos.bin
 amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_ta.bin
 amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_vcn.bin
 amdgpu-firmware/lib/firmware/amdgpu/vangogh_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/vangogh_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/vangogh_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/vangogh_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/vangogh_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/vangogh_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega10_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega10_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega10_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega10_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega10_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega10_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega12_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega12_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega12_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega12_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega12_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega12_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega20_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega20_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega20_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega20_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega20_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/vega20_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_asd.bin
 amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_ce.bin
 amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_me.bin
 amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_mec.bin
 amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_mec2.bin
 amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_pfp.bin
 amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_rlc.bin
 amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_ta.bin
 ibt-firmware/lib/firmware/intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
 iwlwifi-firmware-ax210/lib/firmware/iwlwifi-ty-a0-gf-a0.pnvm
 iwlwifi-firmware-iwl9260/lib/firmware/iwlwifi-9260-th-b0-jf-b0-46.ucode
 iwlwifi-firmware-iwl9000/lib/firmware/iwlwifi-9000-pu-b0-jf-b0-46.ucode

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 54d9051c55)
 2022-04-17 21:31:02 +02:00
张 鹏
e93af247a3 ipq40xx: update E2600AC c1/c2 board 
Modified the radio frequency hardware part of e2600ac c1/c2,
need to cooperate with the modified board.bin file, the device
can work normally.

Signed-off-by: 张 鹏 <sd20@qxwlan.com>
(cherry picked from commit bdc786e82c)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2022-03-26 21:28:41 +01:00
Josef Schlehofer
2ce4ae55db cypress-firmware: drop several packages 
1. Drop package: cypress-firmware-4359-pcie
This binary is no longer provided and there are not many details what
happened.

2. Drop package: cypress-firmware-4359-sdio
This binary is no longer provided, but in this case, to compare it with
PCIe package mention as first, there was added
support in Linux-firmware [1], but no sign of firmware file.

4. Drop package: cypress-firmware-89459-pcie [2]
According to Infineon: "CYW89459 is an automotive Wi-Fi chip which is not
supported in the broad market community."

[1] https://patchwork.kernel.org/project/linux-wireless/patch/20191211235253.2539-6-smoch@web.de/

[2] https://community.infineon.com/t5/Wi-Fi-Bluetooth-for-Linux/the-wifi-driver-for-CYW89459-in-linux4-14-98-2-3-00/m-p/138971

Fixes: 7ca7e0b22d ("cypress-firmware: update it to version 5.4.18-2021_0812")

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 51dee3f4f7)
 2022-03-26 21:28:41 +01:00
Josef Schlehofer
7ca7e0b22d cypress-firmware: update it to version 5.4.18-2021_0812 
- Binary files were renamed to cyfmac from brcmfmac, but the files needs
  to be on the router with the previous naming

[    6.656165] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    6.665182] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.bin failed with error -2
[    6.674928] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.bin

- Cypress were acquired by Infineon Technologies
Thus change the project URL and switch to download files from their
GitHub repository. This is much better than the previous solution, which
requires finding new threads on their community forum about new driver
updates, and it will be necessary to change the URL each time.

Unfortunately, it seems that there is not published changelog, but
according to this forum thread [1], be careful by opening the link from
solution since it contains ending bracket ), it brings fixes for various
security vulnerabilities, which were fixed in 7_45_234.

Fixes:
- FragAttacks
- Kr00k

Also add LICENSE file

Run tested on Seeedstudio router powered by Raspberry Pi 4 CM with
package cypress-firmware-43455-sdio.

Before:
root@OpenWrt:~# dmesg | grep 'Firmware: BCM4345/6'
[    6.895050] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:20:01 version 7.45.206 (r725000 CY) FWID 01-febaba43

After:
root@OpenWrt:~# dmesg | grep 'Firmware: BCM4345/6'
[    6.829805] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2

[1] https://community.infineon.com/t5/Wi-Fi-Bluetooth-for-Linux/Outdated-brcmfmac-firmware-for-Raspberry-Pi-4-in-OpenWrt-21-02-1/m-p/331593#M2269

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
 2022-03-19 16:13:58 +01:00
Hauke Mehrtens
baea8255e0 linux-firmware: Update to version 20220209 
This switches the iwlwifi-firmware-ax200 file to API version 66, this is
the most recent version supported by our driver.

The following files used in OpenWrt changed:
 amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_dmcub.bin
 ar3k-firmware/lib/firmware/qca/nvm_usb_00130201.bin
 ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_010a.bin
 ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_010b.bin
 ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_0303.bin
 ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf.bin
 ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf_010a.bin
 ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf_010b.bin
 ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf_0303.bin
 ar3k-firmware/lib/firmware/qca/rampatch_usb_00130200.bin
 ar3k-firmware/lib/firmware/qca/rampatch_usb_00130201.bin
 iwlwifi-firmware-ax200/lib/firmware/iwlwifi-cc-a0-66.ucode
 iwlwifi-firmware-ax210/lib/firmware/iwlwifi-ty-a0-gf-a0-66.ucode
 iwlwifi-firmware-ax210/lib/firmware/iwlwifi-ty-a0-gf-a0.pnvm
 iwlwifi-firmware-iwl9000/lib/firmware/iwlwifi-9000-pu-b0-jf-b0-46.ucode
 iwlwifi-firmware-iwl9260/lib/firmware/iwlwifi-9260-th-b0-jf-b0-46.ucode
 rtl8822ce-firmware/lib/firmware/rtw88/rtw8822c_fw.bin

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2022-03-07 18:07:29 +01:00
Paul Spooren
038d5bdab1 layerscape: use semantic versions for LSDK 
PKG_VERSION should not contain the package name but the version only.

Signed-off-by: Paul Spooren <mail@aparcar.org>
 2022-03-01 00:01:18 +01:00
Christian Lamparter
1753f8c14b firmware: intel-microcode: update to 20220207 
Debians' changelog by Henrique de Moraes Holschuh <hmh@debian.org>:

* upstream changelog: new upstream datafile 20220207
    * Mitigates (*only* when loaded from UEFI firmware through the FIT)
      CVE-2021-0146, INTEL-SA-00528: VT-d privilege escalation through
      debug port, on Pentium, Celeron and Atom processors with signatures
      0x506c9, 0x506ca, 0x506f1, 0x706a1, 0x706a8
      https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/issues/57#issuecomment-1036363145
    * Mitigates CVE-2021-0127, INTEL-SA-00532: an unexpected code breakpoint
      may cause a system hang, on many processors.
    * Mitigates CVE-2021-0145, INTEL-SA-00561: information disclosure due
      to improper sanitization of shared resources (fast-store forward
      predictor), on many processors.
    * Mitigates CVE-2021-33120, INTEL-SA-00589: out-of-bounds read on some
      Atom Processors may allow information disclosure or denial of service
      via network access.
    * Fixes critical errata (functional issues) on many processors
    * Adds a MSR switch to enable RAPL filtering (default off, once enabled
      it can only be disabled by poweroff or reboot).  Useful to protect
      SGX and other threads from side-channel info leak.  Improves the
      mitigation for CVE-2020-8694, CVE-2020-8695, INTEL-SA-00389 on many
      processors.
    * Disables TSX in more processor models.
    * Fixes issue with WBINDV on multi-socket (server) systems which could
      cause resets and unpredictable system behavior.
    * Adds a MSR switch to 10th and 11th-gen (Ice Lake, Tiger Lake, Rocket
      Lake) processors, to control a fix for (hopefully rare) unpredictable
      processor behavior when HyperThreading is enabled.  This MSR switch
      is enabled by default on *server* processors.  On other processors,
      it needs to be explicitly enabled by an updated UEFI/BIOS (with added
      configuration logic).  An updated operating system kernel might also
      be able to enable it.  When enabled, this fix can impact performance.
    * Updated Microcodes:
      sig 0x000306f2, pf_mask 0x6f, 2021-08-11, rev 0x0049, size 38912
      sig 0x000306f4, pf_mask 0x80, 2021-05-24, rev 0x001a, size 23552
      sig 0x000406e3, pf_mask 0xc0, 2021-04-28, rev 0x00ec, size 105472
      sig 0x00050653, pf_mask 0x97, 2021-05-26, rev 0x100015c, size 34816
      sig 0x00050654, pf_mask 0xb7, 2021-06-16, rev 0x2006c0a, size 43008
      sig 0x00050656, pf_mask 0xbf, 2021-08-13, rev 0x400320a, size 35840
      sig 0x00050657, pf_mask 0xbf, 2021-08-13, rev 0x500320a, size 36864
      sig 0x0005065b, pf_mask 0xbf, 2021-06-04, rev 0x7002402, size 28672
      sig 0x00050663, pf_mask 0x10, 2021-06-12, rev 0x700001c, size 28672
      sig 0x00050664, pf_mask 0x10, 2021-06-12, rev 0xf00001a, size 27648
      sig 0x00050665, pf_mask 0x10, 2021-09-18, rev 0xe000014, size 23552
      sig 0x000506c9, pf_mask 0x03, 2021-05-10, rev 0x0046, size 17408
      sig 0x000506ca, pf_mask 0x03, 2021-05-10, rev 0x0024, size 16384
      sig 0x000506e3, pf_mask 0x36, 2021-04-29, rev 0x00ec, size 108544
      sig 0x000506f1, pf_mask 0x01, 2021-05-10, rev 0x0036, size 11264
      sig 0x000606a6, pf_mask 0x87, 2021-12-03, rev 0xd000331, size 291840
      sig 0x000706a1, pf_mask 0x01, 2021-05-10, rev 0x0038, size 74752
      sig 0x000706a8, pf_mask 0x01, 2021-05-10, rev 0x001c, size 75776
      sig 0x000706e5, pf_mask 0x80, 2021-05-26, rev 0x00a8, size 110592
      sig 0x000806a1, pf_mask 0x10, 2021-09-02, rev 0x002d, size 34816
      sig 0x000806c1, pf_mask 0x80, 2021-08-06, rev 0x009a, size 109568
      sig 0x000806c2, pf_mask 0xc2, 2021-07-16, rev 0x0022, size 96256
      sig 0x000806d1, pf_mask 0xc2, 2021-07-16, rev 0x003c, size 101376
      sig 0x000806e9, pf_mask 0x10, 2021-04-28, rev 0x00ec, size 104448
      sig 0x000806e9, pf_mask 0xc0, 2021-04-28, rev 0x00ec, size 104448
      sig 0x000806ea, pf_mask 0xc0, 2021-04-28, rev 0x00ec, size 103424
      sig 0x000806eb, pf_mask 0xd0, 2021-04-28, rev 0x00ec, size 104448
      sig 0x000806ec, pf_mask 0x94, 2021-04-28, rev 0x00ec, size 104448
      sig 0x00090661, pf_mask 0x01, 2021-09-21, rev 0x0015, size 20480
      sig 0x000906c0, pf_mask 0x01, 2021-08-09, rev 0x2400001f, size 20480
      sig 0x000906e9, pf_mask 0x2a, 2021-04-29, rev 0x00ec, size 106496
      sig 0x000906ea, pf_mask 0x22, 2021-04-28, rev 0x00ec, size 102400
      sig 0x000906eb, pf_mask 0x02, 2021-04-28, rev 0x00ec, size 104448
      sig 0x000906ec, pf_mask 0x22, 2021-04-28, rev 0x00ec, size 103424
      sig 0x000906ed, pf_mask 0x22, 2021-04-28, rev 0x00ec, size 103424
      sig 0x000a0652, pf_mask 0x20, 2021-04-28, rev 0x00ec, size 93184
      sig 0x000a0653, pf_mask 0x22, 2021-04-28, rev 0x00ec, size 94208
      sig 0x000a0655, pf_mask 0x22, 2021-04-28, rev 0x00ee, size 94208
      sig 0x000a0660, pf_mask 0x80, 2021-04-28, rev 0x00ea, size 94208
      sig 0x000a0661, pf_mask 0x80, 2021-04-29, rev 0x00ec, size 93184
      sig 0x000a0671, pf_mask 0x02, 2021-08-29, rev 0x0050, size 102400
    * Removed Microcodes:
      sig 0x00080664, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048
      sig 0x00080665, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048
  * update .gitignore and debian/.gitignore.
    Add some missing items from .gitignore and debian/.gitignore.
  * ucode-blacklist: do not late-load 0x406e3 and 0x506e3.
    When the BIOS microcode is older than revision 0x7f (and perhaps in some
    other cases as well), the latest microcode updates for 0x406e3 and
    0x506e3 must be applied using the early update method.  Otherwise, the
    system might hang.  Also: there must not be any other intermediate
    microcode update attempts [other than the one done by the BIOS itself],
    either.  It must go from the BIOS microcode update directly to the
    latest microcode update.
  * source: update symlinks to reflect id of the latest release, 20220207

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2022-02-26 19:52:41 +01:00
Sungbo Eo
19a90262df wireless-regdb: update to version 2022.02.18 
e061299 wireless-regdb: Raise DFS TX power limit to 250 mW (24 dBm) for the US
2ce78ed wireless-regdb: Update regulatory rules for Croatia (HR) on 6GHz
0d39f4c wireless-regdb: Update regulatory rules for South Korea (KR)
acad231 wireless-regdb: Update regulatory rules for France (FR) on 6 and 60 GHz
ea83a82 wireless-regdb: add support for US S1G channels
4408149 wireless-regdb: add 802.11ah bands to world regulatory domain
5f3cadc wireless-regdb: Update regulatory rules for Spain (ES) on 6GHz
e0ac69b Revert "wireless-regdb: Update regulatory rules for South Korea (KR)"
40e5e80 wireless-regdb: Update regulatory rules for South Korea (KR)
e427ff2 wireless-regdb: Update regulatory rules for China (CN)
0970116 wireless-regdb: Update regulatory rules for the Netherlands (NL) on 6GHz
4dac44b wireless-regdb: update regulatory database based on preceding changes

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
 2022-02-20 13:47:57 +09:00
Pawel Dembicki
a91ab8bc05 ipq40xx: add support for ZTE MF286D 
ZTE MF286D is a LTE router with four gigabit ethernet ports
and integrated QMI mPCIE modem.

Hardware specification:

  - CPU: IPQ4019
  - RAM: 256MB
  - Flash: NAND 128MB + NOR 2MB
  - WLAN1:  Qualcomm Atheros QCA4019 2.4GHz 802.11bgn 2x2:2
  - WLAN2:  Qualcomm Atheros QCA4019 5GHz 802.11anac 2x2:2
  - LTE: mPCIe cat 12 card (Modem chipset MDM9250)
  - LAN: 4 Gigabit Ports
  - USB: 1x USB2.0 (regular port). 1x USB3.0 (mpcie - used by the modem)
  - Serial console: X8 connector 115200 8n1

Known issues:

  - Many LEDs are driven by the modem. Only internal LEDs and wifi LEDs
    are driven by cpu.
  - Wifi LED is triggered by phy0tpt only
  - No VoIP support
  - LAN1/WAN port is configured as WAN
  - ZTE gives only one MAC per device. Use +1/+2/+3 increment for WAN
    and WLAN0/1

Opening the case:

1. Take of battery lid (no battery support for this model, battery cage
   is dummy).
2. Unscrew screw placed behind battery lid.
3. Take off back cover. It attached with multiple plastic clamps.
4. Unscrew four more screws hidden behind back case.
5. Remove front panel from blue chassis. There are more plastic
   clamps.
6. Unscrew two boards, which secures the PCB in the chassis.
7. Extract board from blue chassis.

Console connection (X8 connector):

1. Parameters: 115200 8N1
2. Pin description: (from closest pin to X8 descriptor to farthest)
    - VCC (3.3V)
    - TX
    - RX
    - GND

Install Instructions:

Serial + initramfs:
1. Place OpenWrt initramfs image for the device on a TFTP in
   the server's root. This example uses Server IP: 192.168.1.3
2. Connect serial console (115200,8n1) to X8 connector.
3. Connect TFTP server to RJ-45 port.
4. Stop in u-Boot and run u-Boot commands:
	setenv serverip 192.168.1.3
	setenv ipaddr 192.168.1.72
	set fdt_high 0x85000000
	tftp openwrt-ipq40xx-generic-zte_mf286d-initramfs-fit-zImage.itb
	bootm $loadaddr
5. Please make backup of original partitions, if you think about revert
   to stock.
6. Login via ssh or serial and remove stock partitions:
	ubiattach -m 9
	ubirmvol /dev/ubi0 -N ubi_rootfs
	ubirmvol /dev/ubi0 -N ubi_rootfs_data
7. Install image via "sysupgrade -n".

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(cosmetic changes to the commit message)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2022-02-05 00:44:35 +01:00
Christian Lamparter
c2630ac910 linux-firmware: qca99x0 update package 
Kalle Valo ath10k-firmware repository no longer provides the
legacy board.bin files for the qca99x0 chips. Instead he
copied over the codeaurora version and add more board files.

In the future, this board-2.bin should find its way to
linux-firmware.git, which would allow us to remove the
extra download code completely.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2022-02-05 00:44:35 +01:00
Alar Aun
70eedac9b3 ipq40xx: add MikroTik cAP ac support 
This adds support for the MikroTik RouterBOARD RBcAPGi-5acD2nD
(cAP ac), a  indoor dual band, dual-radio 802.11ac wireless AP, two
10/100/1000 Mbps Ethernet ports.

See https://mikrotik.com/product/cap_ac for more info.

Specifications:
 - SoC: Qualcomm Atheros IPQ4018
 - RAM: 128 MB
 - Storage: 16 MB NOR
 - Wireless:
   · Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae
   · Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae
 - Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 2x 1000/100/10 port,
   PoE in and passive PoE out

Unsupported:
 - PoE out

Installation:
Boot the initramfs image via TFTP and then flash the sysupgrade
image using "sysupgrade -n"

Signed-off-by: Alar Aun <alar.aun@gmail.com>
 2022-02-01 23:18:58 +01:00
Sungbo Eo
0c635cf830 linux-firmware: intel: add firmware for AX210 
Add the most recent supported firmware file for Intel Wi-Fi 6E AX210
wireless chip. The API version 67 is not yet supported by the driver.
Additional PNVM file is required since API version 62.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
 2022-01-31 18:59:10 +00:00
Joshua Roys
51b9aef553 ipq40xx: add support for ASUS RT-ACRH17/RT-AC42U 
SOC:	IPQ4019
CPU:	Quad-core ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
DRAM:	256 MB
NAND:	128 MiB Macronix MX30LF1G18AC
ETH:	Qualcomm Atheros QCA8075 Gigabit Switch (4x LAN, 1x WAN)
USB:	1x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC)
WLAN1:	Qualcomm Atheros QCA4019 2.4GHz 802.11bgn 2x2:2
WLAN2:	Qualcomm Atheros QCA9984 5GHz 802.11nac 4x4:4
INPUT:	1x WPS, 1x Reset
LEDS:	Status, WIFI1, WIFI2, WAN (red & blue), 4x LAN

This board is very similar to the RT-ACRH13/RT-AC58U. It must be flashed
with an intermediary initramfs image, the jffs2 ubi volume deleted, and
then finally a sysupgrade with the final image performed.

Signed-off-by: Joshua Roys <roysjosh@gmail.com>
(added ALT0)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2022-01-15 17:21:01 +01:00
Marty Jones
3fe253c6ab linux-firmware: add new package r8152-firmware 
Linux upstream commit 9370f2d05a
add load firmware file through request_firmware,this affect the
nanopi r2s and some USB adapters in kernel 5.10 with this error:
'r8152 4-1:1.0: unable to load firmware patch rtl_nic/rtl8153b-2.fw'
This patch split the USB NIC firmware files from r8169 firmware,
and adds r8152-firmware to r8152 driver.
Add kmod-usb-net-cdc-ncm to support RTL8156A and RTL8156B 2.5G ethernet
adapters supported since v5.13-rc1.
195aae321c

Signed-off-by: Marty Jones <mj8263788@gmail.com>
 2022-01-08 00:49:59 +01:00
Christian Lamparter
cf8ee49c9b linux-firmware: amd: consolidate amd's linux-firmware entries 
this patch consolidates the amd64-microcode
(moved to linux-firmware.git, previously this was an extra
debian source package download), amdgpu and radeon firmwares
into a shared "amd" makefile.

With the upcoming 20211216 linux-firmware bump,
this will include a microcode update for ZEN 3 CPUs.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2021-12-27 13:51:41 +01:00
Hauke Mehrtens
397dfe4a97 linux-firmware: Update to version 20121216 
The rtl8723bs firmware was removed and a symlink to the rtl8723bu
firmware was created like it is done in upstream linux-firmware.

The following OpenWrt packages are changing:
* amdgpu-firmware: Multiple updates and new files
* ar3k-firmware: Multiple updates and new files
* ath10k-firmware-qca6174: Updated ath10k/QCA6174/hw3.0/board-2.bin
* bnx2x-firmware: Added bnx2x-e1-7.13.21.0.fw, bnx2x-e1h-7.13.21.0.fw and bnx2x-e2-7.13.21.0.fw
* iwlwifi-firmware-iwl8260c: Updated iwlwifi-8000C-36.ucode
* iwlwifi-firmware-iwl8265: Updated iwlwifi-8265-36.ucode
* iwlwifi-firmware-iwl9000: Updated iwlwifi-9000-pu-b0-jf-b0-46.ucode
* iwlwifi-firmware-iwl9260: Updated iwlwifi-9260-th-b0-jf-b0-46.ucode
* r8169-firmware: Updated rtl8153c-1.fw
* rtl8723bs-firmware: removed
* rtl8723bu-firmware: Added rtlwifi/rtl8723bs_nic.bin symlink
* rtl8822ce-firmware: Updated rtw8822c_fw.bin

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2021-12-27 00:10:29 +01:00
Martin Schiller
210128240b ls-ddr-phy: bump to LSDK-21.08 
Update ls-ddr-phy to latest LSDK-21.08.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
 2021-12-13 23:22:29 +01:00
Martin Schiller
693923030c ls-dpl: bump to LSDK-21.08 
Update ls-dpl to latest LSDK-21.08.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
 2021-12-13 23:22:29 +01:00
Martin Schiller
a82e766f17 ls-mc: bump to LSDK-21.08 
Update ls-mc to latest LSDK-21.08.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
 2021-12-13 23:22:29 +01:00
Martin Schiller
5df38cc7ba ppfe-firmware: bump to LSDK-21.08 
Update ppfe-firmware to latest LSDK-21.08.

Switched to AUTORELEASE for simplicity.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
 2021-12-13 23:22:29 +01:00
Martin Schiller
d6ca827043 fman-ucode: bump to LSDK-21.08 
Just update PKG_VERSION/PKG_MIRROR_HASH since fman-ucode
of LSDK-21.08 had no changes.

Switched to AUTORELEASE for simplicity.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
 2021-12-13 23:22:29 +01:00
Martin Schiller
8ef768c2ef ls-rcw: bump to LSDK-21.08 
Update ls-rcw to latest LSDK-21.08.
Drop patch 0001 since it had been integrated.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
 2021-12-13 22:25:28 +01:00
Tan Zien
1add2c0d95 firmware: intel-microcode: update to 20210608 
intel-microcode (3.20210608.2)

  * Correct INTEL-SA-00442 CVE id to CVE-2020-24489 in changelog and
    debian/changelog (3.20210608.1).

intel-microcode (3.20210608.1)

  * New upstream microcode datafile 20210608 (closes: #989615)
    * Implements mitigations for CVE-2020-24511 CVE-2020-24512
      (INTEL-SA-00464), information leakage through shared resources,
      and timing discrepancy sidechannels
    * Implements mitigations for CVE-2020-24513 (INTEL-SA-00465),
      Domain-bypass transient execution vulnerability in some Intel Atom
      Processors, affects Intel SGX.
    * Implements mitigations for CVE-2020-24489 (INTEL-SA-00442), Intel
      VT-d privilege escalation
    * Fixes critical errata on several processors
    * New Microcodes:
      sig 0x00050655, pf_mask 0xb7, 2018-11-16, rev 0x3000010, size 47104
      sig 0x000606a5, pf_mask 0x87, 2021-03-08, rev 0xc0002f0, size 283648
      sig 0x000606a6, pf_mask 0x87, 2021-04-25, rev 0xd0002a0, size 283648
      sig 0x00080664, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048
      sig 0x00080665, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048
      sig 0x000806c1, pf_mask 0x80, 2021-03-31, rev 0x0088, size 109568
      sig 0x000806c2, pf_mask 0xc2, 2021-04-07, rev 0x0016, size 94208
      sig 0x000806d1, pf_mask 0xc2, 2021-04-23, rev 0x002c, size 99328
      sig 0x00090661, pf_mask 0x01, 2021-02-04, rev 0x0011, size 19456
      sig 0x000906c0, pf_mask 0x01, 2021-03-23, rev 0x001d, size 19456
      sig 0x000a0671, pf_mask 0x02, 2021-04-11, rev 0x0040, size 100352
    * Updated Microcodes:
      sig 0x000306f2, pf_mask 0x6f, 2021-01-27, rev 0x0046, size 34816
      sig 0x000306f4, pf_mask 0x80, 2021-02-05, rev 0x0019, size 19456
      sig 0x000406e3, pf_mask 0xc0, 2021-01-25, rev 0x00ea, size 105472
      sig 0x000406f1, pf_mask 0xef, 2021-02-06, rev 0xb00003e, size 31744
      sig 0x00050653, pf_mask 0x97, 2021-03-08, rev 0x100015b, size 34816
      sig 0x00050654, pf_mask 0xb7, 2021-03-08, rev 0x2006b06, size 36864
      sig 0x00050656, pf_mask 0xbf, 2021-03-08, rev 0x4003102, size 30720
      sig 0x00050657, pf_mask 0xbf, 2021-03-08, rev 0x5003102, size 30720
      sig 0x0005065b, pf_mask 0xbf, 2021-04-23, rev 0x7002302, size 27648
      sig 0x00050663, pf_mask 0x10, 2021-02-04, rev 0x700001b, size 24576
      sig 0x00050664, pf_mask 0x10, 2021-02-04, rev 0xf000019, size 24576
      sig 0x00050665, pf_mask 0x10, 2021-02-04, rev 0xe000012, size 19456
      sig 0x000506c9, pf_mask 0x03, 2020-10-23, rev 0x0044, size 17408
      sig 0x000506ca, pf_mask 0x03, 2020-10-23, rev 0x0020, size 15360
      sig 0x000506e3, pf_mask 0x36, 2021-01-25, rev 0x00ea, size 105472
      sig 0x000506f1, pf_mask 0x01, 2020-10-23, rev 0x0034, size 11264
      sig 0x000706a1, pf_mask 0x01, 2020-10-23, rev 0x0036, size 74752
      sig 0x000706a8, pf_mask 0x01, 2020-10-23, rev 0x001a, size 75776
      sig 0x000706e5, pf_mask 0x80, 2020-11-01, rev 0x00a6, size 110592
      sig 0x000806a1, pf_mask 0x10, 2020-11-06, rev 0x002a, size 32768
      sig 0x000806e9, pf_mask 0x10, 2021-01-05, rev 0x00ea, size 104448
      sig 0x000806e9, pf_mask 0xc0, 2021-01-05, rev 0x00ea, size 104448
      sig 0x000806ea, pf_mask 0xc0, 2021-01-06, rev 0x00ea, size 103424
      sig 0x000806eb, pf_mask 0xd0, 2021-01-05, rev 0x00ea, size 104448
      sig 0x000806ec, pf_mask 0x94, 2021-01-05, rev 0x00ea, size 104448
      sig 0x000906e9, pf_mask 0x2a, 2021-01-05, rev 0x00ea, size 104448
      sig 0x000906ea, pf_mask 0x22, 2021-01-05, rev 0x00ea, size 102400
      sig 0x000906eb, pf_mask 0x02, 2021-01-05, rev 0x00ea, size 104448
      sig 0x000906ec, pf_mask 0x22, 2021-01-05, rev 0x00ea, size 103424
      sig 0x000906ed, pf_mask 0x22, 2021-01-05, rev 0x00ea, size 103424
      sig 0x000a0652, pf_mask 0x20, 2021-02-07, rev 0x00ea, size 93184
      sig 0x000a0653, pf_mask 0x22, 2021-03-08, rev 0x00ea, size 94208
      sig 0x000a0655, pf_mask 0x22, 2021-03-08, rev 0x00ec, size 94208
      sig 0x000a0660, pf_mask 0x80, 2020-12-08, rev 0x00e8, size 94208
      sig 0x000a0661, pf_mask 0x80, 2021-02-07, rev 0x00ea, size 93184
  * source: update symlinks to reflect id of the latest release, 20210608

intel-microcode (3.20210216.1)

  * New upstream microcode datafile 20210216
    * Mitigates an issue on Skylake Server (H0/M0/U0), Xeon-D 21xx,
      and Cascade Lake Server (B0/B1) when using an active JTAG
      agent like In Target Probe (ITP), Direct Connect Interface
      (DCI) or a Baseboard Management Controller (BMC) to take the
      CPU JTAG/TAP out of reset and then returning it to reset.
    * This issue is related to the INTEL-SA-00381 mitigation.
    * Updated Microcodes:
      sig 0x00050654, pf_mask 0xb7, 2020-12-31, rev 0x2006a0a, size 36864
      sig 0x00050656, pf_mask 0xbf, 2020-12-31, rev 0x4003006, size 53248
      sig 0x00050657, pf_mask 0xbf, 2020-12-31, rev 0x5003006, size 53248
  * source: update symlinks to reflect id of the latest release, 20210216

intel-microcode (3.20201118.1)

  * New upstream microcode datafile 20201118
    * Removes a faulty microcode update from release 2020-11-10 for Tiger Lake
      processors.  Note that Debian already had removed this specific falty
      microcode update on the 3.20201110.1 release
    * Add a microcode update for the Pentium Silver N/J5xxx and Celeron
      N/J4xxx which didn't make it to release 20201110, fixing security issues
      (INTEL-SA-00381, INTEL-SA-00389)
    * Updated Microcodes:
      sig 0x000706a1, pf_mask 0x01, 2020-06-09, rev 0x0034, size 74752
    * Removed Microcodes:
      sig 0x000806c1, pf_mask 0x80, 2020-10-02, rev 0x0068, size 107520

intel-microcode (3.20201110.1)

  * New upstream microcode datafile 20201110 (closes: #974533)
    * Implements mitigation for CVE-2020-8696 and CVE-2020-8698,
      aka INTEL-SA-00381: AVX register information leakage;
      Fast-Forward store predictor information leakage
    * Implements mitigation for CVE-2020-8695, Intel SGX information
      disclosure via RAPL, aka INTEL-SA-00389
    * Fixes critical errata on several processor models
    * Reintroduces SRBDS mitigations(CVE-2020-0543, INTEL-SA-00320)
      for Skylake-U/Y, Skylake Xeon E3
    * New Microcodes
      sig 0x0005065b, pf_mask 0xbf, 2020-08-20, rev 0x700001e, size 27648
      sig 0x000806a1, pf_mask 0x10, 2020-06-26, rev 0x0028, size 32768
      sig 0x000806c1, pf_mask 0x80, 2020-10-02, rev 0x0068, size 107520
      sig 0x000a0652, pf_mask 0x20, 2020-07-08, rev 0x00e0, size 93184
      sig 0x000a0653, pf_mask 0x22, 2020-07-08, rev 0x00e0, size 94208
      sig 0x000a0655, pf_mask 0x22, 2020-07-08, rev 0x00e0, size 93184
      sig 0x000a0661, pf_mask 0x80, 2020-07-02, rev 0x00e0, size 93184
    * Updated Microcodes
      sig 0x000306f2, pf_mask 0x6f, 2020-05-27, rev 0x0044, size 34816
      sig 0x000406e3, pf_mask 0xc0, 2020-07-14, rev 0x00e2, size 105472
      sig 0x00050653, pf_mask 0x97, 2020-06-18, rev 0x1000159, size 33792
      sig 0x00050654, pf_mask 0xb7, 2020-06-16, rev 0x2006a08, size 35840
      sig 0x00050656, pf_mask 0xbf, 2020-06-18, rev 0x4003003, size 52224
      sig 0x00050657, pf_mask 0xbf, 2020-06-18, rev 0x5003003, size 52224
      sig 0x000506c9, pf_mask 0x03, 2020-02-27, rev 0x0040, size 17408
      sig 0x000506ca, pf_mask 0x03, 2020-02-27, rev 0x001e, size 15360
      sig 0x000506e3, pf_mask 0x36, 2020-07-14, rev 0x00e2, size 105472
      sig 0x000706a8, pf_mask 0x01, 2020-06-09, rev 0x0018, size 75776
      sig 0x000706e5, pf_mask 0x80, 2020-07-30, rev 0x00a0, size 109568
      sig 0x000806e9, pf_mask 0x10, 2020-05-27, rev 0x00de, size 104448
      sig 0x000806e9, pf_mask 0xc0, 2020-05-27, rev 0x00de, size 104448
      sig 0x000806ea, pf_mask 0xc0, 2020-06-17, rev 0x00e0, size 104448
      sig 0x000806eb, pf_mask 0xd0, 2020-06-03, rev 0x00de, size 104448
      sig 0x000806ec, pf_mask 0x94, 2020-05-18, rev 0x00de, size 104448
      sig 0x000906e9, pf_mask 0x2a, 2020-05-26, rev 0x00de, size 104448
      sig 0x000906ea, pf_mask 0x22, 2020-05-25, rev 0x00de, size 103424
      sig 0x000906eb, pf_mask 0x02, 2020-05-25, rev 0x00de, size 104448
      sig 0x000906ec, pf_mask 0x22, 2020-06-03, rev 0x00de, size 103424
      sig 0x000906ed, pf_mask 0x22, 2020-05-24, rev 0x00de, size 103424
      sig 0x000a0660, pf_mask 0x80, 2020-07-08, rev 0x00e0, size 94208
  * 0x806c1: remove the new Tiger Lake update: causes hang on cold/warm boot
    https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/issues/44
    INTEL-SA-00381 AND INTEL-SA-00389 MITIGATIONS ARE THEREFORE NOT INSTALLED
    FOR 0x806c1 TIGER LAKE PROCESSORS by this package update.  Contact your
    system vendor for a firmware update, or wait fo a possible fix in a future
    Intel microcode release.
  * source: update symlinks to reflect id of the latest release, 20201110
  * source: ship new upstream documentation (security.md, releasenote.md)

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
[used different .tar.xz source, but with the same content]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2021-12-03 22:40:13 +01:00
TruongSinh Tran-Nguyen
febc2b831f
ipq40xx: add support for GL.iNet GL-B2200 
This patch adds supports for the GL-B2200 router.

Specifications:
  - SOC: Qualcomm IPQ4019 ARM Quad-Core
  - RAM: 512 MiB
  - Flash: 16 MiB NOR - SPI0
  - EMMC: 8GB EMMC
  - ETH: Qualcomm QCA8075
  - WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11b/g/n 2x2
  - WLAN2: Qualcomm Atheros QCA4019 5GHz 802.11n/ac W2 2x2
  - WLAN3: Qualcomm Atheros QCA9886 5GHz 802.11n/ac W2 2x2
  - INPUT: Reset, WPS
  - LED: Power, Internet
  - UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1
  - UART2: On board with BLE module
  - SPI1: On board socket for Zigbee module

Update firmware instructions:
Please update the firmware via U-Boot web UI (by default at 192.168.1.1, following instructions found at
https://docs.gl-inet.com/en/3/troubleshooting/debrick/).
Normal sysupgrade, either via CLI or LuCI, is not possible from stock firmware.
Please do use the *gl-b2200-squashfs-emmc.img file, gunzipping the produced *gl-b2200-squashfs-emmc.img.gz one first.

What's working:
- WiFi 2G, 5G
- WPA2/WPA3

Not tested:
- Bluetooth LE/Zigbee

Credits goes to the original authors of this patch.

V1->V2:
- updates *arm-boot-add-dts-files.patch correctly (sorry, my mistake)
- add uboot-envtools support
V2->V3:
- Li Zhang updated official patch to fix wrong MAC address on wlan0 (PCI) interface
V3->V4:
- wire up sysupgrade

Signed-off-by: Li Zhang <li.zhang@gl-inet.com>
[fix tab and trailing space, document what's working and what's not]
Signed-off-by: TruongSinh Tran-Nguyen <i@truongsinh.pro>
[rebase on top of master, address remaining comments]
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
[remove redundant check in platform.sh]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2021-12-02 20:43:07 +00:00
Felix Matouschek
1cc3b95efc ipq40xx: Add support for Teltonika RUTX10 
This patch adds support for the Teltonika RUTX10.
This device is an industrial DIN-rail router with 4 ethernet ports,
2.4G/5G dualband WiFi, Bluetooth, a USB 2.0 port and two GPIOs.

The RUTX series devices are very similiar so common parts of the DTS
are kept in a DTSI file. They are based on the QCA AP-DK01.1-C1 dev
board.

See https://teltonika-networks.com/product/rutx10 for more info.

Hardware:
  SoC:                 Qualcomm IPQ4018
  RAM:                 256MB DDR3
  SPI Flash 1:         XTX XT25F128B (16MB, NOR)
  SPI Flash 2:         XTX XT26G02AWS (256MB, NAND)
  Ethernet:            Built-in IPQ4018 (SoC, QCA8075), 4x 10/100/1000 ports
  WiFi 1:              Qualcomm QCA4019 IEEE 802.11b/g/n
  Wifi 2:              Qualcomm QCA4019 IEEE 802.11a/n/ac
  USB Hub:             Genesys Logic GL852GT
  Bluetooth:           Qualcomm CSR8510 (A10U)
  LED/GPIO controller: STM32F030 with custom firmware
  Buttons:             Reset button
  Leds:                Power (green, cannot be controlled)
                       WiFi 2.4G activity (green)
                       WiFi 5G activity (green)

MACs Details verified with the stock firmware:
   eth0:             Partition 0:CONFIG Offset: 0x0
   eth1:             = eth0 + 1
   radio0 (2.4 GHz): = eth0 + 2
   radio1 (5.0 GHz): = eth0 + 3
Label MAC address is from eth0.

The LED/GPIO controller needs a separate kernel driver to function.
The driver was extracted from the Teltonika GPL sources and can be
found at following feed: https://github.com/0xFelix/teltonika-rutx-openwrt

USB detection of the bluetooth interface is sometimes a bit flaky. When
not detected power cycle the device. When the bluetooth interface was
detected properly it can be used with bluez / bluetoothctl.

Flash instructions via stock web interface (sysupgrade based):
  1. Set PC to fixed ip address 192.168.1.100
  2. Push reset button and power on the device
  3. Open u-boot HTTP recovery at http://192.168.1.1
  4. Upload latest stock firmware and wait until the device is rebooted
  5. Open stock web interface at http://192.168.1.1
  6. Set some password so the web interface is happy
  7. Go to firmware upgrade settings
  8. Choose
     openwrt-ipq40xx-generic-teltonika_rutx10-squashfs-nand-factory.ubi
  9. Set 'Keep settings' to off
  10. Click update, when warned that it is not a signed image proceed

Return to stock firmware:
  1. Set PC to fixed ip address 192.168.1.100
  2. Push reset button and power on the device
  3. Open u-boot HTTP recovery at http://192.168.1.1
  4. Upload latest stock firmware and wait until the device is rebooted

Note: The DTS expects OpenWrt to be running from the second rootfs
partition. u-boot on these devices hot-patches the DTS so running from the
first rootfs partition should also be possible. If you want to be save follow
the instructions above. u-boot HTTP recovery restores the device so that when
flashing OpenWrt from stock firmware it is flashed to the second rootfs
partition and the DTS matches.

Signed-off-by: Felix Matouschek <felix@matouschek.org>
 2021-11-28 18:39:01 +01:00
Robert Marko
3ad229db0b ipq40xx: add support for MikroTik hAP ac3 
This adds support for the MikroTik RouterBOARD RBD53iG-5HacD2HnD
(hAP ac³), a  indoor dual band, dual-radio 802.11ac
wireless AP with external omnidirectional antennae, USB port, five
10/100/1000 Mbps Ethernet ports and PoE passthrough.

See https://mikrotik.com/product/hap_ac3 for more info.

Specifications:
 - SoC: Qualcomm Atheros IPQ4019
 - RAM: 256 MB
 - Storage: 16 MB NOR + 128 MB NAND
 - Wireless:
   · Built-in IPQ4019 (SoC) 802.11b/g/n 2x2:2, 3 dBi antennae
   · Built-in IPQ4019 (SoC) 802.11a/n/ac 2x2:2, 5.5 dBi antennae
 - Ethernet: Built-in IPQ4019 (SoC, QCA8075) , 5x 1000/100/10 port,
             passive PoE in, PoE passtrough on port 5
- 1x USB Type A port

Installation:
1. Boot the initramfs image via TFTP
2. Run "cat /proc/mtd" and look for "ubi" partition mtd device number, ex. "mtd1"
3. Use ubiformat to remove MikroTik specific UBI volumes
* Detach the UBI partition by running: "ubidetach -d 0"
* Format the partition by running: "ubiformat /dev/mtdN -y"
Replace mtdN with the correct mtd index from step 2.
3. Flash the sysupgrade image using "sysupgrade -n"

Signed-off-by: Robert Marko <robimarko@gmail.com>
Tested-by: Mark Birss <markbirss@gmail.com>
Tested-by: Michael Büchler <michael.buechler@posteo.net>
Tested-by: Alex Tomkins <tomkins@darkzone.net>
 2021-11-28 17:19:52 +01:00
Nian Bohung
454ebdf1c9 linux-firmware: add firmware for intel ax200 
Signed-off-by: Nian Bohung <n0404.n0404@gmail.com>
 2021-11-20 21:08:25 +01:00
Nian Bohung
b1db558555 cypress-nvram: fix firmware is not exist for raspberry pi compute 4 
Fix file "brcmfmac43455-sdio.raspberrypi,4-compute-module.txt" is not exist.

Signed-off-by: Nian Bohung <n0404.n0404@gmail.com>
 2021-11-20 21:08:25 +01:00
Richard Yu
12d33d388c ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0) 
P&W R619AC is a IPQ4019 Dual-Band AC1200 router.
It is made by P&W (p2w-tech.com) known as P&W R619AC
but marketed and sold more popularly as G-DOCK 2.0.

Specification:

* SOC: Qualcomm Atheros IPQ4019 (717 MHz)
* RAM: 512 MiB
* Flash: 16 MiB (NOR) + 128 MiB (NAND)
* Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN)
* Wireless:
  - 2.4 GHz b/g/n Qualcomm Atheros IPQ4019
  - 5 GHz a/n/ac Qualcomm Atheros IPQ4019
* USB: 1 x USB 3.0
* LED: 4 x LAN, 1 x WAN, 2 x WiFi, 1 x Power (All Blue LED)
* Input: 1 x reset
* 1 x MicroSD card slot
* Serial console: 115200bps, pinheader J2 on PCB
* Power: DC 12V 2A
* 1 x Unpopulated mPCIe Slot (see below how to connect it)
* 1 x Unpopulated Sim Card Slot

Installation:
1. Access to tty console via UART serial
2. Enter failsafe mode and mount rootfs
   <https://openwrt.org/docs/guide-user/troubleshooting/failsafe_and_factory_reset>
3. Edit inittab to enable shell on tty console
   `sed -i 's/#ttyM/ttyM/' /etc/inittab`
4. Reboot and upload `-nand-factory.bin` to the router (using wget)
5. Use `sysupgrade` command to install

Another installation method is to hijack the upgrade server domain
of stock firmware, because it's using insecure http.

This commit is based on @LGA1150(at GitHub)'s work
<a4932c8d5a>
With some changes:
1. Added `qpic_bam` node in dts. I don't know much about this,
   but I observed other dtses have this node.
2. Removed `ldo` node under `sd_0_pinmux`, because `ldo` cause SD card not
   working. This fix is from
   <51143b4c75>
3. Removed the 32MB NOR variant.
4. Removed `cd-gpios` in `sdhci` node, because it's reported that it makes
   wlan2g led light up.
5. Added ethphy led config in dts.
6. Changed nand partition label from `rootfs` to `ubi`.

About the 128MiB variant: The stock bootloader sets size of nand to 64MiB.
But most of this devices have 128MiB nand. If you want to use all 128MiB,
you need to modify the `MIBIB` data of bootloader. More details can be
found on github:
<https://github.com/openwrt/openwrt/pull/3691#issuecomment-818770060>
For instructions on how to flash the MIBIB partition from u-boot console:
<https://github.com/openwrt/openwrt/pull/3691#issuecomment-819138232>

About the Mini PCIe slot: (from "ygleg")
"The REFCLK signals on the Mini PCIe slot is not connected on
this board out of the box. If you want to use the Mini PCIe slot
on the board, you need to (preferably) solder two 0402 resistors:
R436 (REFCLK+) and R444 (REFCLK-)..."
This and much more information is provoided in the github comment:
<https://github.com/openwrt/openwrt/pull/3691#issuecomment-968054670>

Signed-off-by: Richard Yu <yurichard3839@gmail.com>
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
[Added comment about MIBIB+128 MiB variant. Added commit
message section about pcie slot. Renamed gpio-leds' subnodes
and added color, function+enum properties.]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2021-11-14 14:28:34 +01:00
Christian Lamparter
fd717f54be ipq40xx: detangle ath10k-board-qca4019 from ath10k-firmware-qca4019* 
Back in the day, the board-2.bin came with ath10k-firmware-qca4019.
This changed with
commit c3b2efaf24 ("linux-firmware: ath10k: add board firmware packages")
which placed the board-2.bin into a separate package: ath10k-board-qca4019.
This was great, because it addressed one of the caveat of the original
ipq-wifi package:
commit fa03d441e9 ("firmware: add custom IPQ wifi board definitions")

|  2. updating ath10k-firmware-qca4019 will also replace
|      the board-2.bin. For this cases the user needs to
|      manually reinstall the wifi-board package once the
|      ath10k-firmware-qca4019 is updated.

This could be extended further so that ipq-wifi packages
no longer use "install-override" and the various QCA4019
variants list the ath10k-board-qca4019 as a CONFLICT
package.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2021-10-30 16:32:59 +02:00
Christian Lamparter
dbb4c47798 wireless-regdb: update to version 2021.08.28 
e983a25 Update regulatory rules for Ecuador (EC)
a0bcb88 wireless-regdb: Update regulatory rules for Norway (NO) on 6 and 60 GHz
cdf854d wireless-regdb: Update regulatory rules for Germany (DE) on 6GHz
86cba52 wireless-regdb: reduce bandwidth for 5730-5850 and 5850-5895 MHz in US
6fa2384 wireless-regdb: remove PTMP-ONLY from 5850-5895 MHz for US
9839e1e wireless-regdb: recent FCC report and order allows 5850-5895 immediately
42dfaf4 wireless-regdb: update 5725-5850 MHz rule for GB

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2021-10-23 19:31:32 +02:00
Sven Eckelmann
8b09070820 ipq-wifi: Work around Plasma Cloud PA1200 5GHz crash 
It was noticed [1] that the ath10k firmware crashes on 5GHz since OpenWrt
21.02.0. The problem seems to be triggered by the the nonLinearTxFir field
in the 5GHz BDF. If baseEepHeader.nonLinearTxFir (offset 0xc2) is 1 then
the firmware just crashes when setting up the 5Ghz radio using `ifconfig
wlan1 up`:

  ath10k_ahb a800000.wifi: firmware crashed! (guid 9e36ee82-4d2c-4c63-b20b-609a1eaca30c)
  ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
  ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  ath10k_ahb a800000.wifi: firmware ver 10.4-3.6-00140 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 ba79b746
  ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 5f400efc
  ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
  ath10k_ahb a800000.wifi: firmware register dump:
  ath10k_ahb a800000.wifi: [00]: 0x0000000B 0x000015B3 0x009C3C27 0x00975B31
  ath10k_ahb a800000.wifi: [04]: 0x009C3C27 0x00060530 0x00000018 0x004176B8
  ath10k_ahb a800000.wifi: [08]: 0x00405A50 0x00412A30 0x00000000 0x00000000
  ath10k_ahb a800000.wifi: [12]: 0x00000009 0x00000000 0x009B9742 0x009B974F
  ath10k_ahb a800000.wifi: [16]: 0x00971238 0x009B9742 0x00000000 0x00000000
  ath10k_ahb a800000.wifi: [20]: 0x409C3C27 0x004053DC 0x00000D2C 0x00405A60
  ath10k_ahb a800000.wifi: [24]: 0x809C3E13 0x0040543C 0x00000000 0xC09C3C27
  ath10k_ahb a800000.wifi: [28]: 0x809B9AC5 0x0040547C 0x00412A30 0x0040549C
  ath10k_ahb a800000.wifi: [32]: 0x809B8ECD 0x0040549C 0x00000001 0x00412A30
  ath10k_ahb a800000.wifi: [36]: 0x809B8FF3 0x004054CC 0x00412838 0x00000014
  ath10k_ahb a800000.wifi: [40]: 0x809BEF98 0x0040551C 0x0041627C 0x00000002
  ath10k_ahb a800000.wifi: [44]: 0x80986D47 0x0040553C 0x0041627C 0x00416A88
  ath10k_ahb a800000.wifi: [48]: 0x809CBB0A 0x0040559C 0x0041ACC0 0x00000000
  ath10k_ahb a800000.wifi: [52]: 0x809864EE 0x0040560C 0x0041ACC0 0x00000001
  ath10k_ahb a800000.wifi: [56]: 0x809CA8A4 0x0040564C 0x0041ACC0 0x00000001
  ath10k_ahb a800000.wifi: Copy Engine register dump:
  ath10k_ahb a800000.wifi: [00]: 0x0004a000  14  14   3   3
  ath10k_ahb a800000.wifi: [01]: 0x0004a400  16  16  22  23
  ath10k_ahb a800000.wifi: [02]: 0x0004a800   3   3   2   3
  ath10k_ahb a800000.wifi: [03]: 0x0004ac00  15  15  15  15
  ath10k_ahb a800000.wifi: [04]: 0x0004b000   4   4  44   4
  ath10k_ahb a800000.wifi: [05]: 0x0004b400   3   3   2   3
  ath10k_ahb a800000.wifi: [06]: 0x0004b800   1   1   1   1
  ath10k_ahb a800000.wifi: [07]: 0x0004bc00   1   1   1   1
  ath10k_ahb a800000.wifi: [08]: 0x0004c000   0   0 127   0
  ath10k_ahb a800000.wifi: [09]: 0x0004c400   0   0   0   0
  ath10k_ahb a800000.wifi: [10]: 0x0004c800   0   0   0   0
  ath10k_ahb a800000.wifi: [11]: 0x0004cc00   0   0   0   0
  ath10k_ahb a800000.wifi: failed to update channel list: -108
  ath10k_ahb a800000.wifi: failed to set pdev regdomain: -108
  ath10k_ahb a800000.wifi: failed to create WMI vdev 0: -108
  ieee80211 phy1: Hardware restart was requested

Since no actual solution is known (besides downgrading the ath10k firmware)
it seems to be better to disable the nonLinearTxFir for now.

[1] https://lore.kernel.org/ath10k/3423718.UToCqzeSYe@ripper/

Signed-off-by: Sven Eckelmann <sven@narfation.org>
 2021-09-23 20:50:58 +02:00
Sven Eckelmann
e0721608f9 ipq-wifi: Update Plasma Cloud PA1200 BDFs to firmware 3.5.12 
The official Plasma Cloud firmware adjusted the BDFs to contain new
conformance test limits and target power values. These should be imported
to avoid emissions outside the allowed limits.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
 2021-09-23 20:50:58 +02:00
Sven Eckelmann
ebe800765e ipq-wifi: Drop empty wifi package for Netgear WAC510 
The ipq-wifi-netgear_wac510 package is not selected by any device and would
be empty anyway. The default board-2.bin from ath10k-board-qca4019 is
therefore used for this device and the package doesn't provide any visible
features.

Fixes: b126d9c3a3 ("ipq40xx: add netgear wac510 support")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
 2021-09-12 18:52:30 +02:00
Damien Mascord
d996b47be0 linux-firmware: add 2G and 5G precal binaries for QCA99X0 
Some devices (such as Extreme Networks WS-AP3959i-ROW) do not contain
precal binaries in ART, and the precal in the cards eeprom causes
firmware load errors.

These firmware files were previously in linux-firmware,
so these are adding them back and renaming to be cleaner.

Signed-off-by: Damien Mascord <tusker@tusker.org>
 2021-07-25 13:52:38 +02:00
Tomas Lara
4413537430 linux-firmware: update to 20210511 
git log --pretty=oneline --abbrev-commit 20201118..20210511

7685cf4 (HEAD, tag: 20210511) nvidia: Update Tegra194 XUSB firmware to v60.09
cf32752 nvidia: Update Tegra186 XUSB firmware to v55.18
cb8ca82 nvidia: Update Tegra210 XUSB firmware to v50.26
f99d6a1 linux-firmware: update firmware for mhdp8546
ecdfcf8 Merge branch 'adlp_dmc_firmware' of git://anongit.freedesktop.org/drm/drm-firmware into main
547b202 Merge https://github.com/suraj714/linux-firmware-venus into main
3d32f21 i915: Add ADL-P DMC Support
3f23f51 amdgpu: add new polaris 12 MC firmware
a2565bb firmware: nvidia: Add VIC firmware for Tegra194
17ec2a5 qcom: add gpu firmwares for sc7280
b653cf4 Merge https://github.com/pkshih/linux-firmware into main
2a96c08 brcm: Add a link to enable khadas VIM2's WiFi
ffc64a2 rtw89: 8852a: update fw to v0.13.8.0
3e3497c rtl_bt: Update RTL8852A BT USB firmware to 0xD9A8_7893
c7b11ed qcom: Add venus firmware files for VPU-2.0
2f4f0f8 rtw89: 8852a: update fw to v0.13.8.0
fa0efef linux-firmware: Update firmware file for Intel Bluetooth AX210
9be3daa linux-firmware: Update firmware file for Intel Bluetooth 9560
687d64a linux-firmware: Update firmware file for Intel Bluetooth 9260
a7f1249 linux-firmware: Update firmware file for Intel Bluetooth AX200
47650a0 linux-firmware: Update firmware file for Intel Bluetooth AX201
195ecf1 linux-firmware: Intel BT 7265: Fix Security Issues
4116d72 linux-firmware: Update firmware file for Intel Bluetooth 8265
ca83c73 qcom: update venus firmware files for v5.4
1334578 Merge branch 'mrvl-prestera' of https://github.com/PLVision/linux-firmware into main
16052e4 mrvl: prestera: Add Marvell Prestera Switchdev firmware 3.0 version
bdf929d rtw88: 8822c: Update normal firmware to v9.9.9
0b558e8 brcm: add missing symlink for Pi Zero W NVRAM file
cfa004c amdgpu: update arcturus firmware from 21.10
d5567c5 amdgpu: update navy flounder firmware from 21.10
ef5ea5d amdgpu: update sienna cichlid firmware from 21.10
f35700f amdgpu: update vega20 firmware from 21.10
1be98f1 amdgpu: update picasso firmware from 21.10
fee0497 amdgpu: update navi14 firmware from 21.10
15003b0 amdgpu: update green sardine firmware from 21.10
64555fb amdgpu: update vega12 firmware from 21.10
eb07276 amdgpu: update navi12 firmware from 21.10
e36c82a amdgpu: update vega10 firmware from 21.10
4a5eaa2 amdgpu: update renoir firmware from 21.10
65eb326 amdgpu: update navi10 firmware from 21.10
8bdca03 amdgpu: update raven2 firmware from 21.10
c9e44ca amdgpu: update raven firmware from 21.10
bc3e610 rtl_nic: add new firmware for RTL8153 and RTL8156 series
8528618 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware into main
940b7f4 cxgb4: Update firmware to revision 1.25.4.0
f66adc3 Merge branch 'main' of gitolite.kernel.org:/pub/scm/linux/kernel/git/maks/linux-firmware into main
f350e91 Merge https://github.com/rjliao-qca/qca-btfw into main
9bc1bcc Merge https://github.com/Netronome/linux-firmware into main
2f30708 Mellanox: Add new mlxsw_spectrum firmware xx.2008.2438
393f272 brcm: Link CM4's WiFi firmware with DMI machine name.
73144e0 linux-firmware: Update firmware file for Intel Bluetooth AX201
8ab7aba amdgpu: update navi14 smc firmware
4fe6e53 amdgpu: update navi10 SMC firmware
c296849 QCA: Update Bluetooth firmware for QCA6174
d6a18e9 WHENCE: link to similar config file for rtl8821a support
6c419ae nfp: update Agilio SmartNIC flower firmware to rev AOTC-2.14.A.6
af1ca28 amdgpu: add arcturus firmware
0dd245d Merge branch 'sm8250-new-fw' of https://github.com/lumag/linux-firmware into main
55cab07 rtl_bt: Add rtl8723bs_config-OBDA0623.bin symlink
2548d06 brcm: Add nvram for the Chuwi Hi8 (CWI509) tablet
e45c137 brcm: Add nvram for the Predia Basic tablet
d8fa0cf qcom: sm8250: update remoteproc firmware
84af0e0 qcom: update a650 firmware files
3f026a2 rtl_bt: Update RTL8822C BT(UART I/F) FW to 0x59A_76A3
c82cb46 amdgpu: update sienna cichlid firmware for 20.50
24fe696 amdgpu: update vega20 firmware for 20.50
e05d197 amdgpu: update picasso firmware for 20.50
76d07cd amdgpu: update navi14 firmware for 20.50
b2fc037 amdgpu: update vega12 firmware for 20.50
25451a4 amdgpu: update navi12 firmware for 20.50
b938597 amdgpu: update vega10 firmware for 20.50
2542ba7 amdgpu: update renoir firmware for 20.50
b55d063 amdgpu: update navi10 firmware for 20.50
1a62f28 amdgpu: update raven2 firmware for 20.50
4df488f amdgpu: update raven firmware for 20.50
a29bdb2 amdgpu: add initial support for navy flounder
3568f96 (tag: 20210315) linux-firmware: Update firmware file for Intel Bluetooth AX210
9e96e50 linux-firmware: Update firmware file for Intel Bluetooth AX200
c8d0db5 linux-firmware: Update firmware file for Intel Bluetooth AX201
5e2a387 Merge tag 'iwlwifi-fw-2021-03-05-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware into main
b0d3e31 rtw88: 8822c: Update normal firmware to v9.9.6
5a2fd63 iwlwifi: add new FWs from core59-66 release
4f54906 iwlwifi: update 9000-family firmwares
11b7607 iwlwifi: update 7265D firmware
e425f76 Merge branch 'add-silabs-wf200' of github.com:jerome-pouiller/linux-firmware into main
5ecd13f Mellanox: Add new mlxsw_spectrum firmware xx.2008.2406
58fb90a linux-firmware: add frimware for mediatek bluetooth chip (MT7921)
e576a1b rtw89: 8852a: add firmware v0.9.12.2
048a7cb WHENCE: add missing symlink for BananaPi M3
aa6c6e7 Add symlink for BananaPi M2 to brcmfmac43430-sdio config
58825f7 brcm: Fix Raspberry Pi 4B NVRAM file
520f71b silabs: add new firmware for WF200
f7915a0 amdgpu: add initial firmware for green sardine
80cb579 rtw88: RTL8822C: Update normal firmware to v9.9.5
b79d239 (tag: 20210208) Merge branch 'DG1-guc-huc-ADLS-dmc' of git://anongit.freedesktop.org/drm/drm-firmware into main
66970e1 Merge branch 'qcom-rb5' of https://github.com/lumag/linux-firmware into main
cf6fc2b Mellanox: Add new mlxsw_spectrum firmware xx.2008.2304
391fd50 linux-firmware: add firmware for MT7921
c5e3240 rtw88: RTL8821C: Update firmware to v24.8
d33d2d8 linux-firmware: Update firmware file for Intel Bluetooth AX210
3027ae4 linux-firmware: Update firmware file for Intel Bluetooth AX200
13979c3 linux-firmware: Update firmware file for Intel Bluetooth AX201
348d8a9 i915: Add DMC v2.01 for ADL-S
f33f1f7 i915: Add HuC v7.7.1 for DG1
6a422f5 i915: Add GuC v49.0.1 for DG1
df822a8 qcom: Add venus firmware files for VPU-1.0
11a1db1 qcom: Add SM8250 Compute DSP firmware
e55248b qcom: Add SM8250 Audio DSP firmware
da74cc6 qcom: add firmware files for Adreno a650
0578970 brcm: Link RPi4's WiFi firmware with DMI machine name.
d528862 brcm: Add NVRAM for Vamrs 96boards Rock960
870b805 brcm: Update Raspberry Pi 3B+/4B NVRAM for downstream changes
a28a590 cypress: Fix link direction
060ad8b cypress: Link the new cypress firmware to the old brcm files
0f0aefd brcm: remove old brcm firmwares that have newer cypress variants
f580dc2 rtl_bt: Update RTL8822C BT(UART I/F) FW to 0x059A_25CB
7df2220 rtl_bt: Update RTL8822C BT(USB I/F) FW to 0x099a_7253
e79405d rtl_bt: Add firmware and config files for RTL8852A BT USB chip
ef3813d rtl_bt: Update RTL8821C BT(USB I/F) FW to 0x829a_7644
646f159 (tag: 20201218) make AP6212 in bananpi m2 plus/zero work
28185ec linux-firmware: Update firmware file for Intel Bluetooth AX210
23da869 linux-firmware: Update firmware file for Intel Bluetooth AX200
2099248 linux-firmware: Update firmware file for Intel Bluetooth AX201
94de5e2 linux-firmware: Update firmware file for Intel Bluetooth 9560
27a3689 linux-firmware: Update firmware file for Intel Bluetooth 9260
5c3c4af Merge branch 'lt9611uxc' of https://github.com/lumag/linux-firmware into main
aaed4a8 Merge branch 'v1.1.6' of https://github.com/irui-wang/linux_fw_vpu_v1.1.6 into main
d8c9865 Merge branch 'master' of https://github.com/sampnimm/linux-firmware-BT into main
63ab3db linux-firmware: add firmware for Lontium LT9611UXC DSI to HDMI bridge
0fe0fe0 mediatek: update MT8173 VPU firmware to v1.1.6
1a08ec9 QCA : Updated firmware files for WCN3991
7455a36 Merge branch 'guc_v49' of git://anongit.freedesktop.org/drm/drm-firmware into main
7eb7fda linux-firmware: Update firmware file for Intel Bluetooth AX210
5cbf459 linux-firmware: Update firmware file for Intel Bluetooth AX210
c487f7d i915: Add GuC firmware v49.0.1 for all platforms
d9ffb07 i915: Remove duplicate KBL DMC entry
b362fd4 Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018
bc9cd0b linux-firmware: Update AMD SEV firmware
54c797a amdgpu: add sienna cichlid firmware for 20.45
1340e9c amdgpu: update vega20 firmware for 20.45
b260c9c amdgpu: update vega12 firmware for 20.45
d683bd5 amdgpu: update vega10 firmware for 20.45
7c81cc2 amdgpu: update renoir firmware for 20.45
3619e57 amdgpu: update navi14 firmware for 20.45
68ce0fb amdgpu: update navi12 firmware for 20.45
e889b80 amdgpu: update navi10 firmware for 20.45
f4edc15 amdgpu: update raven2 firmware for 20.45
e71210f amdgpu: update raven firmware for 20.45

Signed-off-by: Tomas Lara <tl849670@gmail.com>
[rebased; removed brcmfmac changes due to removed firmware]
Signed-off-by: David Bauer <mail@david-bauer.net>
 2021-06-08 00:38:41 +02:00
Josef Schlehofer
ff2bb16730 linux-firmware: update to version 20210315 and trim down broadcom FW 
In there linux-firmware repository located in kernel, there were removed old
broadcom firmware [1] as they seem to be likely vulnerable to KrØØk vulnerability
(CVE-2019-15126), because Cypress released new versions and superseded
by it.

In OpenWrt, there is Makefile for cypress-firmware, which already provides
the same named packages like it was in linux-firmware. For example, cypress-firmware-43455-sdio
provides brcmfmac-firmware-43455-sdio [2].

Changelog between 2020118 and 20210315:
3568f96 (tag: 20210315) linux-firmware: Update firmware file for Intel Bluetooth AX210
9e96e50 linux-firmware: Update firmware file for Intel Bluetooth AX200
c8d0db5 linux-firmware: Update firmware file for Intel Bluetooth AX201
5e2a387 Merge tag 'iwlwifi-fw-2021-03-05-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware into main
b0d3e31 rtw88: 8822c: Update normal firmware to v9.9.6
5a2fd63 iwlwifi: add new FWs from core59-66 release
4f54906 iwlwifi: update 9000-family firmwares
11b7607 iwlwifi: update 7265D firmware
e425f76 Merge branch 'add-silabs-wf200' of github.com:jerome-pouiller/linux-firmware into main
5ecd13f Mellanox: Add new mlxsw_spectrum firmware xx.2008.2406
58fb90a linux-firmware: add frimware for mediatek bluetooth chip (MT7921)
e576a1b rtw89: 8852a: add firmware v0.9.12.2
048a7cb WHENCE: add missing symlink for BananaPi M3
aa6c6e7 Add symlink for BananaPi M2 to brcmfmac43430-sdio config
58825f7 brcm: Fix Raspberry Pi 4B NVRAM file
520f71b silabs: add new firmware for WF200
f7915a0 amdgpu: add initial firmware for green sardine
80cb579 rtw88: RTL8822C: Update normal firmware to v9.9.5
b79d239 (tag: 20210208) Merge branch 'DG1-guc-huc-ADLS-dmc' of git://anongit.freedesktop.org/drm/drm-firmware into main
66970e1 Merge branch 'qcom-rb5' of https://github.com/lumag/linux-firmware into main
cf6fc2b Mellanox: Add new mlxsw_spectrum firmware xx.2008.2304
391fd50 linux-firmware: add firmware for MT7921
c5e3240 rtw88: RTL8821C: Update firmware to v24.8
d33d2d8 linux-firmware: Update firmware file for Intel Bluetooth AX210
3027ae4 linux-firmware: Update firmware file for Intel Bluetooth AX200
13979c3 linux-firmware: Update firmware file for Intel Bluetooth AX201
348d8a9 i915: Add DMC v2.01 for ADL-S
f33f1f7 i915: Add HuC v7.7.1 for DG1
6a422f5 i915: Add GuC v49.0.1 for DG1
df822a8 qcom: Add venus firmware files for VPU-1.0
11a1db1 qcom: Add SM8250 Compute DSP firmware
e55248b qcom: Add SM8250 Audio DSP firmware
da74cc6 qcom: add firmware files for Adreno a650
0578970 brcm: Link RPi4's WiFi firmware with DMI machine name.
d528862 brcm: Add NVRAM for Vamrs 96boards Rock960
870b805 brcm: Update Raspberry Pi 3B+/4B NVRAM for downstream changes
a28a590 cypress: Fix link direction
060ad8b cypress: Link the new cypress firmware to the old brcm files
0f0aefd brcm: remove old brcm firmwares that have newer cypress variants
f580dc2 rtl_bt: Update RTL8822C BT(UART I/F) FW to 0x059A_25CB
7df2220 rtl_bt: Update RTL8822C BT(USB I/F) FW to 0x099a_7253
e79405d rtl_bt: Add firmware and config files for RTL8852A BT USB chip
ef3813d rtl_bt: Update RTL8821C BT(USB I/F) FW to 0x829a_7644
646f159 (tag: 20201218) make AP6212 in bananpi m2 plus/zero work
28185ec linux-firmware: Update firmware file for Intel Bluetooth AX210
23da869 linux-firmware: Update firmware file for Intel Bluetooth AX200
2099248 linux-firmware: Update firmware file for Intel Bluetooth AX201
94de5e2 linux-firmware: Update firmware file for Intel Bluetooth 9560
27a3689 linux-firmware: Update firmware file for Intel Bluetooth 9260
5c3c4af Merge branch 'lt9611uxc' of https://github.com/lumag/linux-firmware into main
aaed4a8 Merge branch 'v1.1.6' of https://github.com/irui-wang/linux_fw_vpu_v1.1.6 into main
d8c9865 Merge branch 'master' of https://github.com/sampnimm/linux-firmware-BT into main
63ab3db linux-firmware: add firmware for Lontium LT9611UXC DSI to HDMI bridge
0fe0fe0 mediatek: update MT8173 VPU firmware to v1.1.6
1a08ec9 QCA : Updated firmware files for WCN3991
7455a36 Merge branch 'guc_v49' of git://anongit.freedesktop.org/drm/drm-firmware into main
7eb7fda linux-firmware: Update firmware file for Intel Bluetooth AX210
5cbf459 linux-firmware: Update firmware file for Intel Bluetooth AX210
c487f7d i915: Add GuC firmware v49.0.1 for all platforms
d9ffb07 i915: Remove duplicate KBL DMC entry
b362fd4 Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018
bc9cd0b linux-firmware: Update AMD SEV firmware
54c797a amdgpu: add sienna cichlid firmware for 20.45
1340e9c amdgpu: update vega20 firmware for 20.45
b260c9c amdgpu: update vega12 firmware for 20.45
d683bd5 amdgpu: update vega10 firmware for 20.45
7c81cc2 amdgpu: update renoir firmware for 20.45
3619e57 amdgpu: update navi14 firmware for 20.45
68ce0fb amdgpu: update navi12 firmware for 20.45
e889b80 amdgpu: update navi10 firmware for 20.45
f4edc15 amdgpu: update raven2 firmware for 20.45
e71210f amdgpu: update raven firmware for 20.45

[1] https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=0f0aefd733f70beae4c0246edbd2c158d5ce974c

[2] eeda8652f1/package/firmware/cypress-firmware/Makefile (L124)

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
 2021-06-06 00:26:13 +02:00
Robert Marko
b126d9c3a3 ipq40xx: add netgear wac510 support 
This adds support for the Netgear WAC510 Insight Managed Smart Cloud
Wireless Access Point, an indoor dual-band, dual-radio 802.11ac
business-class wireless AP with integrated omnidirectional antennae
and two 10/100/1000 Mbps Ethernet ports.

For more information see:
<https://www.netgear.com/business/wifi/access-points/wac510>

Specifications:
SoC:        Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core
RAM:        256 MiB
Flash1:     2 MiB Winbond W25Q16JV SPI-NOR
Flash2:     128 MiB Winbond W25N01GVZEIG SPI-NAND
Ethernet:   Built-in IPQ4018 (SoC, QCA8072 PHY), 2x 1000/100/10 port,
            WAN port active IEEE 802.3af/at PoE in
Wireless1:  Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 3 dBi antennae
Wireless2:  Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 4 dBi antennae
Input:      (Optional) Barrel 12 V 2.5 A Power, Reset button SW1
LEDs:       Power, Insight, WAN PoE, LAN, 2.4G WLAN, 5G WLAN
Serial:     Header J2
1 - 3.3 Volt (Do NOT connect!)
2 - TX
3 - RX
4 - Ground
WARNING: The serial port needs a TTL/RS-232 3.3 volt level converter!
         The Serial settings are 115200-8-N-1.

Installation via Stock Web Interface:
BTW: The default factory console/web interface login user/password are
admin/password.

In the web interface navigating to Management - Maintenance - Upgrade -
'Firmware Upgrade' will show you what is currently installed e.g.:
Manage Firmware
Current Firmware Version: V5.0.10.2
Backup Firmware Version: V1.2.5.11
Under 'Upgrade Options' choose Local (alternatively SFTP would be
available) then click/select 'Browse File' on the right side, choose
openwrt-ipq40xx-generic-netgear_wac510-squashfs-nand-factory.tar
and hit the Upgrade button below. After a minute or two your browser
should indicate completion printing 'Firmware update complete.' and
'Rebooting AP...'.

Note that OpenWrt will use the WAN PoE port as actual WAN port
defaulting to DHCP client but NOT allowing LuCI access, use LAN port
defaulting to 192.168.1.1/24 to access LuCI.

Installation via TFTP Requiring Serial U-Boot Access:
Connect to the device's serial port and hit any key to stop autoboot.
Upload and boot the initramfs based OpenWrt image as follows:
(IPQ40xx) # setenv serverip 192.168.1.1
(IPQ40xx) # setenv ipaddr 192.168.1.2
(IPQ40xx) # tftpboot openwrt-ipq40xx-generic-netgear_wac510-initramfs-fit-uImage.itb
(IPQ40xx) # bootm

Note: This only runs OpenWrt from RAM and has not installed anything
to flash as of yet. One may permanently install OpenWrt as follows:

Check the MTD device number of the active partition:
root@OpenWrt:/# dmesg | grep 'set to be root filesystem'
[    1.010084] mtd: device 9 (rootfs) set to be root filesystem
Upload the factory image ending with .ubi to /tmp (e.g. using scp or
tftp). Then flash the image as follows (substituting the 9 in mtd9
below with whatever number reported above):
root@OpenWrt:/# ubiformat /dev/mtd9 -f /tmp/openwrt-ipq40xx-generic-netgear_wac510-squashfs-nand-factory.ubi
And reboot.

Dual Image Configuration:
The default U-Boot boot command bootipq uses the U-Boot environment
variables primary/secondary to decide which image to boot. E.g.
primary=0, secondary=3800000 uses rootfs while primary=3800000,
secondary=0 uses rootfs_1.
Switching their values changes the active partition. E.g. from within
U-Boot:
(IPQ40xx) # setenv primary 0
(IPQ40xx) # setenv secondary 3800000
(IPQ40xx) # saveenv
Or from a OpenWrt userspace serial/SSH console:
fw_setenv primary 0
fw_setenv secondary 3800000
Note that if you install two copies of OpenWrt then each will have its
independent configuration not like when switching partitions on the
stock firmware.
BTW: The kernel log shows which boot partition is active:
[    2.439050] ubi0: attached mtd9 (name "rootfs", size 56 MiB)
vs.
[    2.978785] ubi0: attached mtd10 (name "rootfs_1", size 56 MiB)
Note: After 3 failed boot attempts it automatically switches partition.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
[squashed netgear-tar commit into main and rename netgear-tar for
now, until it is made generic.]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2021-06-05 23:29:46 +02:00
Felix Fietkau
d76535c45e wireless-regdb: update to version 2021.04.21 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2021-05-26 11:48:14 +02:00
Hauke Mehrtens
1903233f2b treewide: Mark packages nonshared if they depend on @TARGET_ 
This marks all packages which depend on a target with @TARGET nonshared.
If they are not marked nonshared they would be build by the SDK build
and if this happens with a different SDK, then the SDK from the target
the package depends on, the package would not be added to the index.

This should fix the image builder for some of these packages.

This should fix the image builder at least for bcm27xx/bcm2710 and
bcm4908/generic.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2021-05-24 00:28:22 +02:00