Commit Graph

4981 Commits

Author SHA1 Message Date
Christian Marangi
dfcc0ff5d2
bpf-headers: fix use of netlink.h header
netlink.h header have NL_SET_ERR_MSG_MOD that is tied to kmods. We don't
need kmods on bpf tools and this cause compilation error if the header
is included. Fix it by dropping NL_SET_ERR_MSG_MOD.

Link: https://github.com/openwrt/openwrt/pull/11825
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-05-01 19:11:33 +02:00
Linus Walleij
9c8f2d7c2d modules: Add kernel module for MV88E6xxx DSA switch
This adds a kernel module package for the Marvell
MV88E6XXX DSA switch and a separate module package for
the DSA tagger since it can in theory be used by multiple
DSA switches. Enable both DSA and EDSA tags in the
tagger.

We can't just compile this in because just a few devices
has this DSA, and it depends on e.g. the I2C and SFP
to be loaded as modules first.

We have no examples of DSA switches being packaged as
modules before, all seem to be compiled in, but it
actually works just fine to do this.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-24 23:15:58 +02:00
Stefan Kalscheuer
63dd3f74ac mwlwifi: update to version 10.4.10-20240419
This update contains a minor fix to resolve "detected write beyond size
of field" warning during compilation:
* "replace [0] with []" (1d0d08c)

All patches still apply.

References:
* https://github.com/openwrt/openwrt/issues/15108

Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
2024-04-23 22:33:56 +02:00
Robert Marko
b0422af1b3
mac80211: ath11k: re-enable ipq807x coldboot calibration
It seems that move to kernel 6.6 somehow fixed the remoteproc restart so
now it properly restarts and thus coldboot calibration works as well.

ipq60xx still seems to be broken in a different way so keep it disabled.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-18 11:55:36 +02:00
Christian Marangi
918e2fca1e
qca-nss-dp: add patch fixing rmmod and insmod
Add patch fixing rmmod and insmod. Lots of flawed logic fixed that
permits the module to correctly rmmod and insmod later.

Just to quote some change, use phy_detach instead of phy_disconnect, fix
exclusive reset_control that could only be used once, fix kernel panic
on second edma_cleanup, stop traffic before module exit...

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-04-18 11:54:21 +02:00
Robert Marko
5fe0d296c1 mac80211: ath11k: support DT property to limit channels
Limiting allowed channels per device may be required and is commonly
supported on other drivers, so include a pending patch to add support for
the same.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-13 20:05:01 +02:00
Felix Fietkau
ab9a29a320 mac80211: improve mesh fast tx patch
Change hash key struct size for faster lookup.
Fix clearing cache entries for forwarding

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-04-13 16:33:45 +02:00
Daniel Golle
07918e6612 package: kernel: leds-gca230718: fix build with Linux 6.6
Starting with Linux 6.3 the .probe call no longer got the id parameter,
see also commit torvalds/linux@03c835f498
("i2c: Switch .probe() to not take an id parameter").

As the parameter is anyway unused by the driver, drop it when
building the GCA230718 LED driver for newer kernels.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-04-12 02:07:30 +01:00
Oleg S
d668c74fe6 kernel: add kmod-hwmon-emc2305 support
This module supports the Microchip Technology Inc (SMSC)
EMC2301/EMC2302/EMC2303/EMC2305 fan speed PWM controller chips.

Signed-off-by: Oleg S <remittor@gmail.com>
2024-04-10 10:50:17 +02:00
Paul Spooren
d997477775 treewide: remove implicit SUBTARGET
Historically it's possible to leave the `SUBTARGETS` undefined and
automatically fallback to a "generic" subtarget. This however breaks
various downstream scripts which may have expectations around filenames:

While some targets with an explicit generic subtarget contain `generic`
in the filenames of artifacts, implicit "subtargets" don't.

Right now this breaks the CI[1], possibly also scripts using the ImageBuilders.

This commit removes all code that support implicit handling of
subtargets and instead requires every target to define "SUBTARGETS".

[1]: https://github.com/openwrt/openwrt/actions/runs/8592821105/job/23548273630

Signed-off-by: Paul Spooren <mail@aparcar.org>
2024-04-08 21:53:05 +02:00
Robert Marko
6918c637b7 treewide: package: update missed hashes after switch to ZSTD
With the switch to ZSTD for git clone packaging, hashes have changed so
fixup remaining package hashes that were missed in the inital update.

Fixes: b3c1c57 ("treewide: update PKG_MIRROR_HASH to zst")
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-07 14:56:04 +02:00
Paul Spooren
b3c1c57a35 treewide: update PKG_MIRROR_HASH to zst
When using zst instead of xz, the hash changes. This commit fixes the
hash for packages and tools in core.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2024-04-06 11:24:18 +02:00
Daniel Golle
000d25c312 kernel: ltq-vmmc: fix compilation warning/error
Fix compilation warning enum-int-mismatch which results in failure to
build kmod-ltq-vmmc in case CONFIG_KERNEL_WERROR is set.
.../build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_common.c:392:14: error: conflicting types for 'ifx_mps_fastbuf_init' due to enum/integer mismatch; have 'IFX_return_t(void)' [-Werror=enum-int-mismatch]
  392 | IFX_return_t ifx_mps_fastbuf_init (IFX_void_t)
      |              ^~~~~~~~~~~~~~~~~~~~
.../build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_common.c:120:13: note: previous declaration of 'ifx_mps_fastbuf_init' with type 'IFX_int32_t(void)' {aka 'int(void)'}
  120 | IFX_int32_t ifx_mps_fastbuf_init (IFX_void_t);
      |             ^~~~~~~~~~~~~~~~~~~~
.../build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_common.c:420:14: error: conflicting types for 'ifx_mps_fastbuf_close' due to enum/integer mismatch; have 'IFX_return_t(void)' [-Werror=enum-int-mismatch]
  420 | IFX_return_t ifx_mps_fastbuf_close (IFX_void_t)
      |              ^~~~~~~~~~~~~~~~~~~~~
.../build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_common.c:121:13: note: previous declaration of 'ifx_mps_fastbuf_close' with type 'IFX_int32_t(void)' {aka 'int(void)'}
  121 | IFX_int32_t ifx_mps_fastbuf_close (IFX_void_t);
      |             ^~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

Refresh patches and bump PKG_RELEASE while at it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-04-04 15:12:45 +01:00
Mieczyslaw Nalewaj
667baaf1d9 x86: 6.6: enable System Management Mode emulation on KVM
Include the CONFIG_KVM_SMM option in the kvm-x86 package to enable system management mode emulation on KVM.

Co-authored-by: Stefan Hellermann <stefan@the2masters.de>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-04 08:56:10 +02:00
Mieczyslaw Nalewaj
7e5cf372a4 kernel: 6.6: modules: netdevices: lan743x: add missing dependency
Fix error: Package kmod-lan743x is missing dependencies for the following libraries:
fixed_phy.ko

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-04 08:56:10 +02:00
Mathew McBride
77e03f3c83 kernel: vfio: flag vfio_virqfd as only kernel 6.2 and earlier
Kernel 6.2 folded virqfd (eventd interface for VFIO interrupts)
into the base vfio module, it is no longer a tristate option.

Change suggested by vincejv on GitHub:
https://github.com/openwrt/openwrt/pull/14868#issuecomment-1998260124

Signed-off-by: Mathew McBride <matt@traverse.com.au>
2024-04-04 08:56:10 +02:00
Paul Spooren
7bb9663dfe cryptodev: follow kernel.mk versioning
Instead of redefining the version schema in cryptodev, use the one
automatically defined via `kernel.mk`.

Specifically this changes the version from <kernel>+<package> to
<kernel>.<package> and thereby making it compatible with APK.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2024-04-03 18:41:40 +02:00
Felix Fietkau
a10a6fbac7 mt76: update to Git HEAD (2024-04-03)
605624a4e17b mt76: fix path to page_pool helper include
e4de3592c4e3 wifi: mt76: mt7603: fix tx queue of loopback packets
446f652c967c wifi: mt76: mt7603: add wpdma tx eof flag for PSE client reset
669aba47a145 wifi: mt76: mt7915: fix HE PHY capability regression
5914ea57a31f wifi: mt76: mt7915: workaround dubious x | !y warning
e8b5991f7dac wifi: mt76: mt7915: workaround too long expansion sparse warnings
e507b4e32ead wifi: mt76: mt7921: fix fw used for offload check for mt7922
725f531c1459 wifi: mt76: connac: check for null before dereferencing
b108dda7e201 wifi: mt76: mt7996: fix size of txpower MCU command
5b7616491f07 wifi: mt76: mt7921: introduce mt7920 PCIe support
0436995feca9 wifi: mt76: mt7921s: fix potential hung tasks during chip recovery
75759dca73d5 wifi: mt76: mt7925: ensure 4-byte alignment for suspend & wow command
b96ab5e62010 wifi: mt76: mt7996: fix uninitialized variable in mt7996_irq_tasklet()
7ff11c7259a3 wifi: mt76: sdio: move mcu queue size check inside critical section
02846a5d0f0f wifi: mt76: mt7915: Remove unused of_gpio.h
cb8df32e0475 wifi: mt76: mt7996: disable rx header translation for BMC entry
a4c4b550512e wifi: mt76: connac: use peer address for station BMC entry
260c5b7c3ba0 wifi: mt76: mt7996: set RCPI value in rate control command
0b7e645db9c2 wifi: mt76: connac: enable HW CSO module for mt7996
f19035fe0b4d wifi: mt76: mt7996: fix non-main BSS no beacon issue for MBSS scenario
424e9df466ce wifi: mt76: mt7996: fix potential memory leakage when reading chip temperature
f70cb4f0508e wifi: mt76: connac: enable critical packet mode support for mt7992
5f1bf8865247 wifi: mt76: mt7996: add sanity checks for background radar trigger
1e336a8582dc wifi: mt76: connac: use muar idx 0xe for non-mt799x as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-04-03 13:09:15 +02:00
Christian Marangi
844a41f745
ltq-vdsl-vr11-mei: add patch fixing compilation with kernel 6.6
Add patch fixing compilation with kernel 6.6.

class_create now require only the name instead of the module ownership
reference.

Also the kernel enabled checks for enum.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-04-02 23:45:22 +02:00
Christian Marangi
3b7169f786
ltq-vdsl-vr11: add patch fixing compilation with kernel 6.6
Add patch fixing compilation with kernel 6.6.

class_create now require only the name instead of the module ownership
reference.

Also the kernel enabled checks for enum.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-04-02 23:45:22 +02:00
Rafał Miłecki
7236d4f82b mt76: add mt7603 possible workaround for MT7603EN / MT7628AN stability
Add debugfs entry for disabling frames buffering that may be a reason
for mt7603 instability. This patch was sent upstream for review and at
least wasn't rejected yet. Let's add it to let OpenWrt users test if it
really helps.

Example usage:
echo N > /sys/kernel/debug/ieee80211/phy0/mt76/frames_buffering

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-04-02 07:30:27 +02:00
Sean Khan
a0962e8c04 qca-nss-dp: cp instead of symlink for nss_dp_arch.h
Build files shouldn't be symlinked into the staging directory, as doing so
would create a race condition if the build folder for 'qca-nss-dp' gets
deleted for any reason.

We should instead just copy over the required platform file to avoid
breaking compilation for any dependent packages.

Signed-off-by: Sean Khan <datapronix@protonmail.com>
2024-04-01 19:44:45 +02:00
Sean Khan
00f8c86624 qca-ssdk: rework make to allow parallel building
The current build procedure always wipes away build files, this is
costly as ssdk is a parent dependency on a whole host of packages and
will always end up rebuilding (and in serial) the whole package.

This patch includes:

1. Module Building Optimization: Instead of creating a temporary
directory (temp) and copying files into it for module building,
the directly invoke the module build command with the
necessary paths. This simplifies the build process
and avoids unnecessary file operations, speeding up
the build process and reducing disk usage.

2. Parallel Build Support: By removing the explicit creation of
the temporary directory and associated file copying operations,
and passing in $(MAKE) $(PKG_JOBS) allows building in parallel.

3. Fix `EXTRA_CFLAGS`: This variable is referenced and set within MAKE_FLAGS,
so doesn't preserve spaces. Should have its defined value quoted.

Signed-off-by: Sean Khan <datapronix@protonmail.com>
2024-04-01 11:08:57 +02:00
Roland Reinl
0682974aa8 filogic: Add LED driver for GCA230718
Add basic support for the LED driver for GCA230718.

 - I didn't find any documentation or driver for it, so the information below is purely based on my investigations
 - If there is already I driver for it, please tell me. Maybe I didn't search enough
 - I implemented a kernel module (leds-gca230718) to access the LEDs via DTS
 - The LED controller supports PWM for brightness control and ramp control for smooth blinking. This is not implemented in the driver
 - The LED controller supports toggling (on -> off -> on -> off) where the brightness of the LEDs can be set individually for each on cycle
 - Until now, only simple active/inactive control is implemented (like when the LEDs would have been connected via GPIO)
 - Controlling the LEDs requires three sequences sent to the chip. Each sequence consists of
   - A reset command (0x81 0xE4) written to register 0x00
   - A control command (for example 0x0C 0x02 0x01 0x00 0x00 0x00 0xFF 0x01 0x00 0x00 0x00 0xFF 0x87 written to register 0x03)
 - The reset command is always the same
 - In the control command
   - byte 0 is always the same
   - byte 1 (0x02 in the example above) must be changed in every sequence: 0x02 -> 0x01 -> 0x03)
   - byte 2 is set to 0x01 which disables toggling. 0x02 would be LED toggling without ramp control, 0x03 would be toggling with ramp control
   - byte 3 to 6 define the brightness values for the LEDs (R,G,B,W) for the first on cycle when toggling
   - byte 7 defines the toggling frequency (if toggling enabled)
   - byte 8 to 11 define the brightness values for the LEDs (R,G,B,W) for the second on cycle when toggling
   - byte 12 is constant 0x87

Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
2024-03-31 19:01:19 +02:00
Tomasz Maciej Nowak
d506ea3e80 kernel: kmod-phy-smsc: add dependency on crc16
Introduced WoL feature needs CRC16 support.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2024-03-29 17:32:26 +01:00
Robert Marko
1d33ee019f kernel: qca-ssdk: fix C45 MDIO support on kernel 6.6
Kernel 6.3 has introduced separate C45 read/write operations, and thus
split them out of the C22 operations completely so the old way of marking
C45 reads and writes via the register value does not work anymore.

This is causing SSDK to fail and find C45 only PHY-s such as Aquantia ones:
[   22.187877] ssdk_phy_driver_init[371]:INFO:dev_id = 0, phy_adress = 8, phy_id = 0x0 phytype doesn't match
[   22.209924] ssdk_phy_driver_init[371]:INFO:dev_id = 0, phy_adress = 0, phy_id = 0x0 phytype doesn't match

This in turn causes USXGMII MAC autoneg bit to not get set and then UNIPHY
autoneg will time out, causing the 10G ports not to work:
[   37.292784] uniphy autoneg time out!

So, lets detect C45 reads and writes by the magic BIT(30) in the register
argument and if so call separate C45 mdiobus read/write functions.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-26 18:10:50 +01:00
Paul Spooren
c02a2db05e treewide: update PKG_MIRROR_HASH after APK version schema
With the change in version schema the downloaded files changed, too,
mostly the hash is now prefixed with a tilde `~` instead of a dash `-`.

Since each downloaded archive contains folder with the same name as the
archive, the checksum changed.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2024-03-25 09:32:48 +01:00
Tim Harvey
ae8bf1a26e imx: add imx8m support
Add imx8m support:
 - add a cortexa53 subtarget to imx
 - move ARCH and KERNELNAME to subtargets
 - account for kernel modules that are not used for cortexa53

No device-specific targets or firmware images are created yet but all
imx8m* dtbs will be built.

enabling CONFIG_TARGET_ROOTFS_INITRAMFS results in
openwrt-imx-cortexa53-imx8m-initramfs-kernel.bin which has been
successfully booted on an imx8mm-evk using the following:

u-boot=> tftpboot $fdt_addr_r image-imx8mm-evk.dtb && \
tftpboot $kernel_addr_r openwrt-imx-cortexa53-imx8m-initramfs-kernel.bin && \
booti $kernel_addr_r - $fdt_addr_r

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2024-03-24 21:19:10 +01:00
Mieczyslaw Nalewaj
bce7b4f8e5 mac80211: carl9170: re-fix fortified-memset warning
The carl9170_tx_release() function sometimes triggers a fortified-memset
warning in my randconfig builds:

In file included from include/linux/string.h:254,
                 from drivers/net/wireless/ath/carl9170/tx.c:40:
In function 'fortify_memset_chk',
    inlined from 'carl9170_tx_release' at drivers/net/wireless/ath/carl9170/tx.c:283:2,
    inlined from 'kref_put' at include/linux/kref.h:65:3,
    inlined from 'carl9170_tx_put_skb' at drivers/net/wireless/ath/carl9170/tx.c:342:9:
include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  493 |                         __write_overflow_field(p_size_field, size);

Kees previously tried to avoid this by using memset_after(), but it seems
this does not fully address the problem. I noticed that the memset_after()
here is done on a different part of the union (status) than the original
cast was from (rate_driver_data), which may confuse the compiler.

Unfortunately, the memset_after() trick does not work on driver_rates[]
because that is part of an anonymous struct, and I could not get
struct_group() to do this either. Using two separate memset() calls
on the two members does address the warning though.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-03-23 14:26:05 +01:00
Marius Durbaca
28ee115673 kernel: kmod-ata-ahci-platform: enable support for RK35xx
enable support for RK35xx in kmod-ata-ahci-platform kernel module

Suggested-by: Tianling Shen <cnsztl@immortalwrt.org>
Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
2024-03-23 07:55:43 +01:00
Paul Spooren
e8725a932e treewide: use APK compatible version schema
Different from OPKG, APK uses a deterministic version schema which chips
the version into chunks and compares them individually. This enforces a
certain schema which was previously entirely flexible.

 - Releases are added at the very and end prefixed with an `r` like
`1.2.3-r3`.
- Hashes are prefixed with a `~` like `1.2.3~abc123`.
- Dates become semantic versions, like `2024.04.01`
- Extra tags are possible like `_git`, `_alpha` and more.

For full details see the APK test list:
https://gitlab.alpinelinux.org/alpine/apk-tools/-/blob/master/test/version.data

Signed-off-by: Paul Spooren <mail@aparcar.org>
2024-03-22 22:14:22 +01:00
Robert Marko
d9a2886263 kernel: qca-nss-dp: enable compiling against 6.6
Since 6.5 netdev_rx_queue was moved out of netdevice.h so include the new
header since that is where it lives now.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-22 21:19:21 +01:00
Robert Marko
6a44115338 kernel: qca-ssdk: allow compiling against 6.6
Add a patch that makes SSDK recognize kernel 6.6 and thus allows
compiling against it.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-22 21:19:21 +01:00
Florian Eckert
879826154f kernel: update deprecated license information
Update the deprecated license information from GPL-2.0 to GPL-2.0-only
as written in the COPYING file of the linux source tree.

Also add the 'COPYING' file to the PKG_LICENSE_FILES variable.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-03-21 21:49:07 +01:00
Florian Eckert
3128157ec7 mac80211: add missing license information
The lincense information for the packages mac80211 are missing.
This commit adds the missing information.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-03-21 21:49:07 +01:00
Felix Fietkau
85ad6b9569 mt76: update to Git HEAD (2024-03-18)
a903d3169193 wifi: mt76: mt7921: fix a potential association failure upon resuming
eb0d0ce344f3 wifi: mt76: mt7921: fix suspend issue on MediaTek COB platform
841bf82e9958 wifi: mt76: fix the issue of missing txpwr settings from ch153 to ch177
ce7ccc540168 wifi: mt76: Remove redundant assignment to variable tidno
a238df940d6f wifi: mt76: mt7915: initialize rssi on adding stations
46c7d1849dbd wifi: mt76: replace skb_put with skb_put_zero
b5640b3153c7 wifi: mt76: fix tx packet loss when scanning on DBDC
7b054e5cb3af wifi: mt76: mt7915: fix mcu command format for mt7915 tx stats
3f27a64a8010 wifi: mt76: mt7915: fix bogus Tx/Rx airtime duration values
4f681a8fbc91 wifi: mt76: mt7915: fix HE PHY capabilities IE for station mode
8ede229eb8b5 wifi: mt76: mt7915: only set MT76_MCU_RESET for the main phy
2330781b8c5f wifi: mt76: mt7996: only set MT76_MCU_RESET for the main phy
e5fb6995e7eb wifi: mt76: mt7915: add support for disabling in-band discovery
b4a917417c85 wifi: mt76: mt7915: add mt7986, mt7916 and mt7981 pre-calibration
2135e201e7a9 mt76: mt7915: add fallback in case of missing precal data

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-03-18 13:25:11 +01:00
Daniel Golle
40fce9dcb8 kernel: modules: package driver for MediaTek T7xx PCIe 5G modem
Build and package driver for MediaTek PCIe 5G WWAN modem T7xx device
available in Linux 6.1 and 6.6 as kmod-mtk-t7xx.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-03-17 22:41:03 +00:00
Zoltan HERPAI
afd5926e37 hwmon: add TC654 fan-controller support
Add support for the Microchip TC654 PWM fan-controller.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-03-17 00:19:20 +01:00
Felix Fietkau
dea42f67ab mac80211: fix a crash triggered by sta disconnect with per-sta VLANs
Reported-by: ranygh@riseup.net
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-03-16 08:50:52 +01:00
Felix Fietkau
163c87dfc2 mac80211: fix another regression in the broadcast AQL patch
Add a separate bit in struct ieee80211_tx_info to indicate airtime tracked
as broadcast/multicast. This avoids a race condition where airtime from
stations that were just removed wasn't getting subtracted from the total
PHY airtime.

Fixes: 95e633efbd ("mac80211: add AQL support for broadcast/multicast packets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-03-15 20:37:21 +01:00
Robert Marko
8fb23465ca kernel: modules: video: select drm-exec and drm-suballoc-helper for AMDGPU
drm-amdgpu and drm-radeon require drm-exec and/or drm-suballoc-helper in
6.6, so since we have them packaged separately include them when required.

Fixes: 5b08b56007 ("kernel: modules: video: adapt for kernel 6.6")
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-15 15:25:03 +01:00
Robert Marko
08f1c36d00 kernel: modules: video: package DRM suballocation helper
Linux 6.4 has split out the previously AMDGPU specific suballocation
helper into a generic one and it has its own symbol now.

So, lets package it as a separate helper as AMDGPU still requires it
for 6.6.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-15 15:25:03 +01:00
Robert Marko
a6b3cc95f2 kernel: modules: video: package DRM EXEC
Linux 6.6 has added DRM EXEC as a separate symbol, so package it separately
as AMDGPU requires it.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-15 15:25:03 +01:00
Robert Marko
5c7400e932 kernel: modules: video: drm: remove DRM_EXEC and DRM_SUBALLOC_HELPER
As part of adding kernel 6.6 support, DRM_EXEC and DRM_SUBALLOC_HELPER were
added to the kmod-drm, however these are only used by drm-amdgpu and
drm-radeon which are only supported on x86.

So, lets start fixing building of other targets by removing these from the
main kmod-drm, in follow-up commits they will be packaged separately and
selected when required.

Fixes: 5b08b56007 ("kernel: modules: video: adapt for kernel 6.6")
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-15 15:25:03 +01:00
Hauke Mehrtens
d2898c273d kernel: kmod-hwmon-coretemp: Depend on x86
This kernel module depends on x86, it works only on some Intel CPUs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-14 20:56:18 +01:00
Hauke Mehrtens
9c6cf8e77c kernel: kmod-video-cpia2: Depend on kernel 5.15
This driver was moved to staging in kernel 6.1 and then removed in
kernel 6.3, see these commits:
https://git.kernel.org/linus/be8cebc46d9d38166a1b3fda22a018ae52b0928e
https://git.kernel.org/linus/9ea8a9c72a9b4d24e6045ee25f5e465dc22f9f55

Build it only on older kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-14 20:56:18 +01:00
Hauke Mehrtens
fcf0453549 kernel: kmod-can: Fix build of can drivers
Many can kernel modules are now gated by the newly introduced
CONFIG_CAN_NETLINK configuration option. Activate it to build the can
drivers again.
This was changed in this upstream Linux commit:
https://git.kernel.org/linus/df6ad5dd838e0fa543ca28ca6154901fa65a9443

This should fix these warnings with kernel 6.1 and 6.6:
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-c-can is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-c-can-pci is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-c-can-platform is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-mcp251x is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-slcan is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-usb-8dev is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-usb-ems is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-usb-kvaser is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-usb-peak is not available in the kernel config - generating empty package

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-14 20:56:11 +01:00
Hauke Mehrtens
d249635c5b kernel: kmod-can-flexcan: Fix flexcan.ko location
The flexcan.ko file was moved in upstream Linux:
https://git.kernel.org/linus/bfd00e021cf162049946a9e0047b0997d2b35fec
This fixes the build with kernel >= 5.17. This module was never build
with kernel 6.1 before.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-14 20:53:34 +01:00
Hauke Mehrtens
712cda1351 kernel: kmod-can-slcan: Fix can-slcan.ko location
The slcan.ko file was moved in upstream Linux:
https://git.kernel.org/linus/98b12064591d635db86da4957b547067dc6897cc
This fixes the build with kernel >= 6.0. This module was never build
with kernel 6.1 before.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-14 20:53:34 +01:00
Hauke Mehrtens
c00fbba57c kernel: kmod-crypto-gf128: Fix build with kernel 6.6
The gf128mul.ko module was moved in kernel 6.2:
https://git.kernel.org/linus/61c581a46a9668747d355436bd4b2505594539bd

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-14 20:53:34 +01:00