ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-28 01:28:59 +00:00
Code Issues Actions 10 Packages Projects Releases Wiki Activity
62,097 Commits 10 Branches 76 Tags 926 MiB
7a120ee72e
Commit Graph

228 Commits

Author SHA1 Message Date
John Crispin
39469dea7f boot: make use of kmodloader if it is available 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36428
 2013-04-25 19:02:28 +00:00
Jo-Philipp Wich
6bddf226d3 base-files: move sysctl init after boot 
SVN-Revision: 36131
 2013-03-26 10:02:58 +00:00
Jo-Philipp Wich
7aace3ee3e base-files: fix bad start index in previous commit 
SVN-Revision: 36130
 2013-03-25 18:45:23 +00:00
Jo-Philipp Wich
acca7eadc4 package/base-files: change sysctl handling Move /etc/init.d/sysctl to index 00 and add hotplug script that applies interface specific sysctls for interfaces that only appear later - this allows to reliably configure per-interface parameters in sysctl.conf, e.g. to disable ipv6 autoconfig on a specific iface. 
SVN-Revision: 36129
 2013-03-25 18:43:30 +00:00
John Crispin
f43b7934d2 make basefiles aware of procd 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36003
 2013-03-13 18:11:19 +00:00
Steven Barth
92ad26d1b6 base-files: Fix IPv6 early sysctls again * Kernel IPv6 /proc interface inconsistency caused races 
SVN-Revision: 35417
 2013-02-01 12:28:24 +00:00
Steven Barth
ea7c9c85a8 base-files: Fix race-conditions with IPv6 sysctls 
SVN-Revision: 35368
 2013-01-29 10:13:33 +00:00
Mirko Vogt
439a869090 Do not overload mount-call - trying to reduce confusion 
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh

/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.

SVN-Revision: 34792
 2012-12-19 16:07:46 +00:00
Gabor Juhos
38fced86ee base-files: add support for the morse LED trigger 
Write "delay" and "message" options to their respective files,
allowing Morse code message configuration through UCI.
The delay (dit length) defaults to 150ms (about 8 words per minute,
suitable for beginners).

Signed-off-by: Petr Viktorin <encukou@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34380
 2012-11-25 17:20:49 +00:00
Florian Fainelli
d3f22617a2 base-files: skip LEDs handled by rssileds in led init-script 
Without this, /etc/init.d/led will try to set the non-existing 'rssi' trigger.
This doesn't harm as the kernel will refuse this setting, but it outputs some
ugly log-lines:
Jun 24 10:15:19 OpenWrt user.info sysinit: setting up led RSSILOW
Jun 24 10:15:19 OpenWrt user.info sysinit: sh: write error: Invalid argument
...

In order to avoid this, skip LEDs with trigger = "rssi" in /etc/init.d/led

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33717
 2012-10-11 06:45:02 +00:00
Florian Fainelli
78f4cf3d70 base-files: release an attached loop device on umounting 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 33477
 2012-09-19 15:13:44 +00:00
Jo-Philipp Wich
9ae901445b /etc/functions.sh => /lib/functions.sh 
SVN-Revision: 32062
 2012-06-05 16:04:23 +00:00
Jonas Gorski
80650c9475 base-files: wait for wifi modules to settle 
On slower devices wifi drivers might take too long for detecting
devices, resulting in the wifi detect call not seeing them.

This was observed on a bcm6348 with bcm4318 wifi. Adding a one second
pause was enough for b43 to expose the device.

SVN-Revision: 31639
 2012-05-06 21:25:42 +00:00
Jo-Philipp Wich
3c4165a305 enable ntpd server for busybox 
hi

Another version, in this one the enable_server option is in the timeserver ntp part of the "system" config file
You can patch trunk and bacfire (tested both)
You can put busybox ntpd in client mode (if you put server), in client & server (by putting enable_server to 1, ntpd listen to udp 123), and also in server mode only (if you didn't put any servers in the config and still put enable_server 1,  ntpd will answer with the time of the router)

I've replaced "config_foreach getpeers timeserver" with "config_get peers ntp server" because we want ntp timeserver, not random ones (to pre-answer if someone want to say that it's intrusive ...)

 Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>

Le 27/03/2012 20:41, Etienne Champetier a écrit :
> I've now tested my trunk patch and it works fine
> But I still can't find were $PROG is defined (is this a mistake, or some sort of built in variable???)
> (I've made some grep and nothing)
>
> Le 23/03/2012 02:19, Philip Prindeville a écrit :
>> Maybe:
>>
>> [ -n "$PROG" -a -x "$PROG" ] || return 1
>>
>> instead?
>>
>>
>> On 3/22/12 4:34 PM, Etienne Champetier wrote:
>>> Hi
>>>
>>> The 2 attached patchs (trunk & bacfire) add busybox ntpd enable_server option, as busybox ntpd server is compiled by default.
>>> We only need 1 client/server daemon (olipro patch was launching 2 daemons)
>>> I've fully tested the bacfire patch, and as i don't have a running openwrt trunk i'm not sure for the trunk patch (i'm sure about my modifications, but i'm not sure about "[ -x $PROG ] || return 1", as "$PROG" isn't defined ?!)
>>>
>>> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
>>>
>>>
>>> Le 16/01/2012 01:57, Philip Prindeville a écrit :
>>>> On 1/14/12 11:37 AM, Olipro wrote:
>>>>> On Saturday 14 Jan 2012 02:45:59 Philip Prindeville wrote:
>>>>>> Don't we already have a 'disabled' option?  Now we're adding an
>>>>>> 'enable_server' option?
>>>>>>
>>>>>> That seems confusing for no useful reason.
>>>>>>
>>>>> have you bothered to read what I originally wrote? your response would make
>>>>> me inclined to believe that you didn't.
>>>>>
>>>>> currently the ntpd initscript only runs it as a CLIENT - this patch enables
>>>>> you to have one instance running as a client and another as a SERVER that
>>>>> other hosts can synchronise with.
>>>>>
>>>>> Or perhaps I'm misunderstanding, what would you propose for allowing the
>>>>> built-in busybox ntpd to be utilised as a server? a separate init script
>>>>> entirely perhaps?
>>>> Or separate config sections... instead of 'config ntp' have 'config ntp-server' and 'config ntp-client'.
>>>>
>>>> -Philip
>>>>
>>>>
>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel@lists.openwrt.org
>>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

SVN-Revision: 31374
 2012-04-20 15:05:38 +00:00
Felix Fietkau
5744d736f2 base-files: remove old coldplugging hacks that are no longer necessary since the new main hotplug2 instance calls udevtrigger as well 
SVN-Revision: 30916
 2012-03-13 09:18:30 +00:00
Felix Fietkau
a963a80a38 base-files: the initial hotplug2 instance sometimes misses a few relevant events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this 
SVN-Revision: 29862
 2012-01-22 21:14:22 +00:00
Jo-Philipp Wich
9fd3886365 base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com> 
SVN-Revision: 29806
 2012-01-19 15:37:47 +00:00
Gabor Juhos
ff89832fdb package/base-files: add support for the switch LED trigger 
SVN-Revision: 29629
 2011-12-31 15:02:35 +00:00
Gabor Juhos
3f85c52a3a package/base-files: use case statement in led init script 
SVN-Revision: 29628
 2011-12-31 15:02:32 +00:00
Jo-Philipp Wich
33443d2a8c base-files: now that we have date -k, adjust the kernel timezone after setting up TZ and localtime 
SVN-Revision: 29204
 2011-11-17 01:18:22 +00:00
Nicolas Thill
93886bc776 package/base-files: use new service wrapper 
SVN-Revision: 28835
 2011-11-07 22:58:34 +00:00
Felix Fietkau
44ba13b578 base-files: load modules early, run wifi detect afterwards and only then process uci defaults 
this allows uci-defaults scripts to override wifi settings

SVN-Revision: 28733
 2011-11-03 20:02:25 +00:00
Jo-Philipp Wich
272d95f0f1 base-files: remove rdate integration, add busybox ntpd init script and server list in /etc/config/system The rdate applet proved to be too unreliable to obtain the current time on boot: - public time servers are rare and often unreachable or overloaded - rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions - the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations - the time protocol as specified in RFC 868 is considered obsolete This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly. The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or by clearing the timeserver list in /etc/config/system. 
SVN-Revision: 28612
 2011-10-27 00:21:53 +00:00
Felix Fietkau
c2b5767572 base-files: move network related scripts to a separate package to make the transition to netifd easier 
SVN-Revision: 28495
 2011-10-20 15:01:06 +00:00
Jo-Philipp Wich
bfbbe5893f base-files: use "zonename" system option to symlink /etc/localtime via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc 
SVN-Revision: 28306
 2011-09-26 02:28:04 +00:00
Jo-Philipp Wich
32731a72c2 base-files: pass conloglevel to syslogd (#9463, #9647) 
SVN-Revision: 27400
 2011-07-03 15:11:58 +00:00
Felix Fietkau
9a227d88dd base-files: do not write to /etc/config/wireless at boot time unless a new interface was found 
eliminates unnecessary flash write cycles at every boot

patch by Peter Wagner (tripolar)

SVN-Revision: 27127
 2011-06-07 17:00:43 +00:00
Jo-Philipp Wich
ba1c1e9016 base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352) 
SVN-Revision: 26848
 2011-05-08 10:25:58 +00:00
Vasilis Tsiligiannis
980190367c base-files: Use -h instead of deprecated -L for symlink check 
SVN-Revision: 26485
 2011-04-05 15:09:43 +00:00
Vasilis Tsiligiannis
48465d3d63 base-files: fix minor problem in init.d/boot 
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.

Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>

SVN-Revision: 26483
 2011-04-05 15:09:32 +00:00
Vasilis Tsiligiannis
1b66204ccd base-files: Autodetect newly added wireless hardware 
SVN-Revision: 26166
 2011-03-15 00:44:15 +00:00
Florian Fainelli
d7fe921089 base-files: support port_state in led config (#6763) 
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>

SVN-Revision: 25172
 2011-01-27 21:49:46 +00:00
Gabor Juhos
63c786dde7 base-files: add support for the usbdev LED trigger 
SVN-Revision: 24647
 2010-12-17 17:10:14 +00:00
Jo-Philipp Wich
c0820d3261 base-files: respect .auto option when running coldplug_interface_*() hooks on boot 
SVN-Revision: 21588
 2010-05-27 23:04:56 +00:00
Jo-Philipp Wich
6a3cbba92e base-files: add a coldplug_interface_* hook to bring up non-hotpluggable interfaces on boot 
SVN-Revision: 21389
 2010-05-06 19:50:22 +00:00
Vasilis Tsiligiannis
a481cafb55 base-files: Remove redundant stopping of watchdog 
busybox watchdog applet should stop the watchdog before shutting down

SVN-Revision: 21341
 2010-05-03 10:56:58 +00:00
Florian Fainelli
20da5f495f add stop() to watchdog init script, patch from Yury Polyanskiy 
SVN-Revision: 21334
 2010-05-03 09:05:35 +00:00
Florian Fainelli
1847940688 Fix bug in foregrounding in /etc/init.d/rcS 
Not using the config_xxx functions correctly.  Amended.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 20928
 2010-04-16 18:14:08 +00:00
Florian Fainelli
eafa2ec962 option to allow boot to run to completion before starting shell 
Setting the system variable "foreground" to yes causes the system to run
the init scripts in series and wait for completion.

This is useful if (a) you don't want the user getting into the console
until the system is initialized, or (b) you have things going on in your
scripts that require strict ordering (and no possible race conditions).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 20841
 2010-04-13 19:57:25 +00:00
Jo-Philipp Wich
10c00a6368 base-files: also regenerate wifi config if existing config contains only whitespace 
SVN-Revision: 20669
 2010-04-03 13:31:59 +00:00
Felix Fietkau
3ab30b486f base-files: reload switch settings on /etc/init.d/network start as well 
SVN-Revision: 20232
 2010-03-15 14:02:49 +00:00
Felix Fietkau
bfeb96126d add the block-mount package by Daniel Dickinson (cshore), replacing existing automount functionality 
SVN-Revision: 19877
 2010-02-26 22:45:39 +00:00
Lars-Peter Clausen
275b0d8cd4 Don't do lazy unmounting of filessystems at reboot/poweroff. It is unneeded and could couse a broken filesystem if unmounting takes to long. Thanks to Peter Wagner 
SVN-Revision: 19568
 2010-02-09 18:07:36 +00:00
Felix Fietkau
10ec4fa292 when rebooting, use lazy umounts as fallback (patch by puchu) 
SVN-Revision: 19429
 2010-01-30 18:17:57 +00:00
Felix Fietkau
541725ce18 stop syslogd before rebooting, otherwise umount might not work properly when logging to a file (thx, puchu) 
SVN-Revision: 19428
 2010-01-30 18:17:52 +00:00
Felix Fietkau
d46a32fa60 when rebooting, stop the network interfaces last (just before umount) to allow services to shut down properly (thx, puchu) 
SVN-Revision: 19427
 2010-01-30 18:17:48 +00:00
Felix Fietkau
a254a9ff08 base-files: do not warn about nonexistant sysctl overrides (some of them are config dependent) 
SVN-Revision: 19375
 2010-01-29 02:17:11 +00:00
Felix Fietkau
8ec79b460c run led init after /etc/init.d/done to keep the configured led settings active after the system has finished booting Signed-off-by: Nuno Goncalves <nunojpg@gmail.com> 
SVN-Revision: 19050
 2010-01-06 02:34:20 +00:00
Felix Fietkau
889532d1fd do not start multiple subshells for applying /etc/uci-defaults. use sh -x for hush compatibility 
SVN-Revision: 18717
 2009-12-09 15:15:25 +00:00
Felix Fietkau
e39038f688 mount debugfs by default 
SVN-Revision: 18502
 2009-11-23 20:35:05 +00:00
Jo-Philipp Wich
cfe1bc11ad base-files: only try to execute watchdog if binary is present 
SVN-Revision: 18102
 2009-10-20 17:07:08 +00:00
Jo-Philipp Wich
bdaeaafbef base-files: introduce a ready-to-use /etc/rc.local to let users run custom commands on init without creating custom init scripts 
SVN-Revision: 17571
 2009-09-11 21:35:03 +00:00
Felix Fietkau
91d40a14af Revert "fix nonhotpluggable networks not being brought up. Closes #2781" (r17527) until we've solved the race conditions it creates 
SVN-Revision: 17544
 2009-09-09 00:16:55 +00:00
Travis Kemen
27915ac778 fix nonhotpluggable networks not being brought up. Closes #2781 
SVN-Revision: 17527
 2009-09-06 17:02:14 +00:00
Felix Fietkau
7d67818ab1 Revert "add ifup -a to boot(), closes #4543 #2781" (r17515) Hotpluggable interfaces are already brought up before /etc/init.d/network boot and this change can break them, if the ifup -a command runs at the wrong time, also starts many interfaces twice, which can lead to issues with PPPoE. 
SVN-Revision: 17516
 2009-09-05 13:05:59 +00:00
Travis Kemen
1776830e64 add ifup -a to boot(), closes #4543 #2781 
SVN-Revision: 17515
 2009-09-05 05:33:23 +00:00
Travis Kemen
4c47562a37 extend logging functions 
SVN-Revision: 17514
 2009-09-04 21:09:13 +00:00
Felix Fietkau
7c32f45749 base-files: clean up init.d/fstab and port it to the new config_get 
... also remove the unused noauto variable in swapon.

Signed-off-by: Malte S. Stretz <mss@apache.org>

SVN-Revision: 17159
 2009-08-07 00:08:01 +00:00
Felix Fietkau
ae0745e240 base-files: port init.d/led to new config_get 
... and don't call logger directly, rcS takes care of the correct redirection

Signed-off-by: Malte S. Stretz <mss@apache.org>

SVN-Revision: 17158
 2009-08-07 00:07:56 +00:00
Felix Fietkau
2892e2f1d5 base-files: port init.d/boot to new config_get 
... and localize some variables.

Signed-off-by: Malte S. Stretz <mss@apache.org>

SVN-Revision: 17157
 2009-08-07 00:07:51 +00:00
Gabor Juhos
9b5e65f101 base-files: set rules file for hotplug2 in the boot script (closes #5235) 
SVN-Revision: 16215
 2009-05-30 17:09:41 +00:00
Gabor Juhos
463a6f4bda base-files: update command line for the new hotplug2 
SVN-Revision: 16154
 2009-05-28 18:48:54 +00:00
Felix Fietkau
cbd52550bd rcS: wait for init scripts to complete before initiating the shutdown (patch from #5032) 
SVN-Revision: 15530
 2009-04-30 22:59:18 +00:00
Nicolas Thill
2fdeecdb47 add an explicit 'sysinit' tag for logging initscripts output, instead of '' that was logged as is 
SVN-Revision: 15323
 2009-04-21 12:02:34 +00:00
Michael Büsch
20b5626363 Allow running without "logger" installed 
SVN-Revision: 14938
 2009-03-18 13:05:18 +00:00
Michael Büsch
088ea2fb6e Support configurations without syslogd/klogd. 
SVN-Revision: 14937
 2009-03-18 12:20:21 +00:00
Hauke Mehrtens
3ac154fc9c On shutdown disabled every mounted swap device. Fixes #4721 Thanks to Angel Marin 
SVN-Revision: 14770
 2009-03-07 12:58:08 +00:00
Florian Fainelli
1716050f0c allow specifying port where to log (#2019) 
SVN-Revision: 14396
 2009-02-03 20:26:00 +00:00
Jo-Philipp Wich
341c1dbdf5 package/base-files: fix chmod of /tmp/.uci, bump package revision 
SVN-Revision: 13903
 2009-01-06 21:53:45 +00:00
Travis Kemen
91d3e6b05b make option name optional 
SVN-Revision: 12585
 2008-09-13 00:08:39 +00:00
Felix Fietkau
2176ae1a6f fix a race condition which would leave dnsmasq in infinite resolving recursion nirvana 
SVN-Revision: 12424
 2008-08-28 14:10:55 +00:00
John Crispin
12df593510 fixes broken if-then in led init script 
SVN-Revision: 12411
 2008-08-27 20:33:13 +00:00
John Crispin
3403cbe948 remove /etc/functions.sh call from led hotplug script 
SVN-Revision: 12312
 2008-08-14 19:07:22 +00:00
Steven Barth
6b6d027172 added support for the timer-trigger to uci LED support 
SVN-Revision: 12236
 2008-08-07 11:01:46 +00:00
John Crispin
72396bd614 add uci led support - /etc/config/system can hold led info which is applied at boot - adds /sbin/led.sh to set/clear leds via a name defined in /etc/config/system 
SVN-Revision: 12104
 2008-08-04 22:56:46 +00:00
John Crispin
b73eedd62b work aroung error message during boot if swapon is nt installed 
SVN-Revision: 12087
 2008-08-04 08:50:16 +00:00
Felix Fietkau
37c7e13a5f move the hotplug2 kill command from preinit to /etc/init.d/boot, so that it works for initramfs as well 
SVN-Revision: 12058
 2008-08-01 03:01:42 +00:00
Nicolas Thill
a760ff5861 fix variable names in tests 
SVN-Revision: 11911
 2008-07-22 21:19:05 +00:00
Yuji Mano
0b5f602421 Revert previous bad commit r11512 
SVN-Revision: 11513
 2008-06-16 19:37:00 +00:00
Yuji Mano
5ee48c0b00 Add the PS3 specific utility bl-option, a helper sctipt to get and set bootloader options in flash memory. 
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>

SVN-Revision: 11512
 2008-06-16 19:14:13 +00:00
John Crispin
0bf765b362 system now knows which timezone it is in 
SVN-Revision: 11445
 2008-06-11 19:59:16 +00:00
Matteo Croce
ac8bf03f8e create /etc/fstab on boot (closes #3458) 
SVN-Revision: 11225
 2008-05-20 19:02:19 +00:00
Matteo Croce
0a1c669ec1 fix some wrong paths 
SVN-Revision: 11217
 2008-05-19 22:08:46 +00:00
Rod Whitby
c715985c97 base-files: Update /etc/init.d/fstab with new location of swapon and swapoff (they moved from /sbin to /usr/sbin) 
SVN-Revision: 11157
 2008-05-17 00:13:05 +00:00
Ralph Hempel
6d4c89c7f5 adding check for /proc/net/vlan/config (==vlan enabled kernel) 
SVN-Revision: 11132
 2008-05-13 09:21:17 +00:00
Matteo Croce
ac5cfeb417 fix swap{on,off} path 
SVN-Revision: 10863
 2008-04-19 14:36:01 +00:00
Travis Kemen
37b0cc9a10 fix restart on platforms without a setup_switch() 
SVN-Revision: 10846
 2008-04-15 16:29:49 +00:00
Travis Kemen
bae7e5bebb add missing include in restart 
SVN-Revision: 10794
 2008-04-12 14:57:47 +00:00
Matteo Croce
633e548e01 fix typo(2) in watchdog init script 
SVN-Revision: 10727
 2008-04-03 21:01:16 +00:00
Matteo Croce
cd4447d269 fix typo in watchdog init script 
SVN-Revision: 10726
 2008-04-03 20:59:18 +00:00
Florian Fainelli
dd2afbeee3 Start the watchdog daemon if a harware watchdog is present 
SVN-Revision: 10721
 2008-04-03 14:36:10 +00:00
Florian Fainelli
8d30372bdc Make the syslog ring-buffer size configurable (#3204) 
SVN-Revision: 10557
 2008-03-07 10:44:13 +00:00
Florian Fainelli
c3c83c6574 Fix typo 
SVN-Revision: 10544
 2008-03-04 15:50:41 +00:00
Florian Fainelli
62b0af39c7 Also call setup_switch on network restart 
SVN-Revision: 10540
 2008-03-02 14:56:13 +00:00
Felix Fietkau
0cf1a58282 Here comes the new UCI. Enjoy :) 
SVN-Revision: 10367
 2008-02-03 06:48:15 +00:00
Felix Fietkau
d36374c428 init: check permissions on rc.d files 
We try to unconditionally execute /etc/rc.d/* files, even if they're
not executable - an easy way of temproarily disabling a service. When
this happens, we get a permission denied error on boot.

This change only tries to run execulable startup scripts.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

SVN-Revision: 9607
 2007-11-28 02:36:14 +00:00
Felix Fietkau
b443ee0fbb init: don't start hotplug2 if it doesn't exist 
The current init script always tries to start hotplug 2, even if
it's not present, so we get an error on boot.

This change checks for the presence of the hotplug2 binary before
trying to start it.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

SVN-Revision: 9606
 2007-11-28 02:36:10 +00:00
Gabor Juhos
131d358fc3 6tunnel: move init/config files to the right place 
SVN-Revision: 9453
 2007-10-27 07:12:13 +00:00
Florian Fainelli
f038ae8671 Mark 6tunnel as executable, avoids ": /etc/init.d/rcS: line 8: /etc/rc.d/S466tunnel: Permission denied" 
SVN-Revision: 9424
 2007-10-24 13:42:15 +00:00
Florian Fainelli
64734f94c7 Add 6tunnel configuration for tunnel brokers based configuration (not SiXXS), disabled by default 
SVN-Revision: 9259
 2007-10-11 09:01:38 +00:00
Rod Whitby
ac8f66b987 base-files: Added support for swap configuration in /etc/config/fstab 
SVN-Revision: 8947
 2007-09-22 13:47:20 +00:00
Rod Whitby
cd95009fc6 Added support for /etc/default/fstab - a means of automatically mounting devices on boot. 
SVN-Revision: 8916
 2007-09-21 13:20:50 +00:00
Felix Fietkau
ca32501abe add --no-coldplug to the hotplug2 process started by /etc/init.d/boot - should prevent duplicate ifup actions. thx, ffrrrr. 
SVN-Revision: 8864
 2007-09-20 10:19:24 +00:00
John Crispin
206998371f wireless config gets regenerated not only when it does not exist, buit also if it is 0 len 
SVN-Revision: 8149
 2007-07-24 22:10:10 +00:00
Felix Fietkau
f95db8bac8 fix a warning (#1800) 
SVN-Revision: 7809
 2007-06-30 20:00:29 +00:00
Felix Fietkau
c09dc20f2c replace the hotplug2 fork handling hack with a better solution implemented in upstream (thanks, iSteve) 
SVN-Revision: 7786
 2007-06-30 11:05:14 +00:00
Felix Fietkau
8c41e51e92 fix failsafe on broadcom, send netlink events in diag when running linux 2.6 
SVN-Revision: 7722
 2007-06-25 08:32:25 +00:00
Felix Fietkau
4f16e9cc3e keep track of the network interface states (stored in uci format in /var/state/network, overlay over /etc/config/network) 
SVN-Revision: 7643
 2007-06-16 00:01:33 +00:00
Florian Fainelli
440f537f48 Add the conloglevel option (#1682) 
SVN-Revision: 7613
 2007-06-13 17:41:54 +00:00
Mike Baker
4a41439c46 unified preinit environment 
SVN-Revision: 7173
 2007-05-10 14:37:47 +00:00
Mike Baker
f0fa2a3de5 unmount filesystems at shutdown 
SVN-Revision: 7166
 2007-05-10 10:45:04 +00:00
Mike Baker
291420a8f3 add K* scripts to be run at shutdown 
SVN-Revision: 7163
 2007-05-10 10:07:38 +00:00
Mike Baker
fa0568fdcb move syslogd and klogd to init.di/boot script, add remote logging support 
SVN-Revision: 7160
 2007-05-10 09:29:55 +00:00
Felix Fietkau
76184df0e6 fix networking on broadcom and possibly other targets as well (#1658) 
SVN-Revision: 7149
 2007-05-09 20:54:41 +00:00
Felix Fietkau
ca7a815602 use hotplug2 for serializing hotplug events on 2.6 
SVN-Revision: 7097
 2007-05-05 18:33:18 +00:00
Felix Fietkau
9507f89800 create /dev/root on boot - fixes cf2nand on rb532 
SVN-Revision: 7066
 2007-04-29 16:57:55 +00:00
Felix Fietkau
65113c481f we can use some more hotplug processes here... 
SVN-Revision: 6980
 2007-04-16 23:58:46 +00:00
Felix Fietkau
d56750665c use rc.common for usb init script 
SVN-Revision: 6873
 2007-04-06 16:07:36 +00:00
Florian Fainelli
2266aad2ec Limit the number of hotplug childrens 
SVN-Revision: 6804
 2007-04-01 18:30:32 +00:00
Felix Fietkau
2c62bddcfe Add an 'Image Configuration' menu to menuconfig Packages can export a list of config options with labels and data types through the metadata. The selected config values will be exported to the target filesystem in /etc/uci-defaults and applied on the first boot. 
SVN-Revision: 6572
 2007-03-16 03:02:31 +00:00
Felix Fietkau
b77680287e add new config option for the hostname in /etc/config/system (fixes #1302, #1438) 
SVN-Revision: 6532
 2007-03-06 21:28:57 +00:00
Felix Fietkau
a44c286fdb nuke mdev and replace it with hotplug2 :) 
SVN-Revision: 6512
 2007-03-04 20:31:53 +00:00
Felix Fietkau
84bec9f9cf add support for if{down,up} -a and implement proper start/stop/restart for /etc/init.d/network 
SVN-Revision: 6455
 2007-03-02 13:21:33 +00:00
Felix Fietkau
e2c94324e7 make usb init script executable 
SVN-Revision: 6203
 2007-01-25 17:42:07 +00:00
Felix Fietkau
ade7e1b7cf use syslogd -C16 instead of syslogd -C 16 (busybox 1.4 compatibility) 
SVN-Revision: 6202
 2007-01-25 17:39:38 +00:00
Florian Fainelli
78af4adbc5 Mount usb filesystem at startup (#1077) 
SVN-Revision: 6163
 2007-01-21 18:11:27 +00:00
Felix Fietkau
656412d1a3 Forward port whiterussian resolv.conf changes /etc/resolv.conf links to /tmp/resolv.conf /tmp/resolv.conf links to /tmp/resolv.conf.auto by default (which is where the ISPs nameserver is in) When dnsmasq starts, it replaces /tmp/resolv.conf with a file pointing to 127.0.0.1 
SVN-Revision: 6043
 2007-01-08 21:33:53 +00:00
Felix Fietkau
59a06c71cb rename default/ to files/ 
SVN-Revision: 5622
 2006-11-22 23:30:57 +00:00