Commit Graph

3803 Commits

Author SHA1 Message Date
Daniel Golle
0495324b9b mac80211: make sure existing iface belongs to correct (fullmac) phy
Some FullMAC cfg80211 wireless devices do not support virtual
interfaces, hence there is script logic to keep the existing network
device. Improve this to support renaming the interface if needed and
make sure the existing interface actually belongs to the right phy.
Change calls to 'iw' to avoid outputing warnings and errors to not
confuse users of such devices.

Also bump PKG_RELEASE which has been forgotten in the previous two
mac80211 changes.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-17 13:31:58 +01:00
David Bauer
0f1b5ce2f5 mac80211: drop data frames without key on encrypted links
If we know that we have an encrypted link (based on having had
a key configured for TX in the past) then drop all data frames
in the key selection handler if there's no key anymore.

This fixes an issue with mac80211 internal TXQs - there we can
buffer frames for an encrypted link, but then if the key is no
longer there when they're dequeued, the frames are sent without
encryption. This happens if a station is disconnected while the
frames are still on the TXQ.

Detecting that a link should be encrypted based on a first key
having been configured for TX is fine as there are no use cases
for a connection going from with encryption to no encryption.
With extended key IDs, however, there is a case of having a key
configured for only decryption, so we can't just trigger this
behaviour on a key being configured.

Cc: stable@vger.kernel.org
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-04-17 13:27:40 +02:00
Daniel Golle
99d567a83d mac80211: fix detecting existing interface
Instead of using the actual interface name, a hard-coded 'wlan0' has
slipped into the script. Replace it.

Fixes: ccf2aa9d4b ("mac80211: detect existing interface before adding")
Reported-by: John Crispin <john@phrozen.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-17 11:36:35 +01:00
Kevin Darbyshire-Bryant
9fd36f54f5 Revert "kmod-sched: add act_police"
This reverts commit 1b973b54ea.

It turns out act_police is included in the kmod-sched package so this
package turns out to be superfluous and causes file provision conflicts.

Ooooops!  Best revert it then.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-04-14 08:48:33 +01:00
Daniel Golle
a66efbf916 mac80211: adapt for single-instance wpad
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-14 00:22:21 +01:00
Jose Olivera
93a8cdf5d8 mwlwifi: Update the 88W8964's firmware to 9.3.2.12 and fix backports version detection
Updates the 88W8964 firmware used in the Linksys WRT3200ACM and WRT32X
[v9.3.2.6 -> v9.3.2.12]

Removes 0c43219 ("mwlwifi: Fix loading with backports v5.3")
as it has been merged upstream.

Unfortunately, there is a bug wherein Kaloz's repo, the version
detection mechanism for fixing vendor commands doesn't work.

It pulls in the Linux kernel version, which as of this time is
"4.14.y" or "4.19.y"

However, the proper behaviour is that it should pull in the mac80211
backports version which as of now is "5.4.27"

The included patch works around this using a backports define found
only on versions >5.3, "VENDOR_CMD_RAW_DATA".

Signed-off-by: Jose Olivera <oliverajeo@gmail.com>
2020-04-13 22:11:26 +02:00
Lucian Cristian
8f342a39de kernel: hwmon: add dme1737 driver
SMSC DME1737, SCH3112, SCH3114, SCH3116, SCH5027 monitoring support

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2020-04-13 22:11:22 +02:00
Adrian Schmutzler
23d3fafd87 broadcom-wl: fix compilation with kernel 5.4
This adds two fixes for compilation with kernel 5.4:

1. dev_open from include/linux/netdevice.h needs a second parameter
   since kernel 5.0:
   00f54e68924e ("net: core: dev: Add extack argument to dev_open()")
2. get_ds() macro definition has been dropped since kernel 5.1:
   736706bee329 ("get rid of legacy 'get_ds()' function")
   Since get_ds() has been just a macro before, replace it in
   the driver instead of creating a version switch.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-12 12:41:12 +02:00
Adrian Schmutzler
d761b9f211 broadcom-wl: fix compilation with kernel >= 4.15
Since kernel 4.15, init_timer is not available anymore, and has been
replaced by timer_setup. The fixes compilation of wl_linuc.c, which
returned the following errors beforehand (line-wrapped manually):

.../broadcom-wl-5.10.56.27.3/driver/wl_linux.c: In function 'wl_init_timer':
.../broadcom-wl-5.10.56.27.3/driver/wl_linux.c:2576:2: error: implicit
	declaration of function 'init_timer'; did you mean 'init_timers'?
	[-Werror=implicit-function-declaration]
  init_timer(&t->timer);
  ^~~~~~~~~~
  init_timers
.../broadcom-wl-5.10.56.27.3/driver/wl_linux.c:2577:10: error:
	'struct timer_list' has no member named 'data'
  t->timer.data = (ulong) t;
          ^
.../broadcom-wl-5.10.56.27.3/driver/wl_linux.c:2578:20: error: assignment
	to 'void (*)(struct timer_list *)' from incompatible pointer type
	'void (*)(ulong)' {aka 'void (*)(long unsigned int)'}
	[-Werror=incompatible-pointer-types]
  t->timer.function = wl_timer;

This should fix build of several devices on bcm63xx with testing
kernel (4.19).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-12 12:35:37 +02:00
Kevin Darbyshire-Bryant
1b973b54ea kmod-sched: add act_police
"Whoop whoop, sound of da police"

Add an ingress capable traffic policer module configurable with tc.

From the man page:

The police action allows to limit bandwidth of traffic matched by the
filter it is attached to. Basically there are two different algorithms
available to measure the packet rate: The first one uses an internal
dual token bucket and is configured using the rate, burst, mtu,
peakrate, overhead and linklayer parameters. The second one uses an
in-kernel sampling mechanism. It can be fine-tuned using the estimator
filter parameter.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-04-10 12:26:31 +01:00
Eneas U de Queiroz
2e6b6f9fca kernel: add @IPV6 dependency to ipv6 modules
IPv6 modules should all depend on @IPV6, to avoid circular dependencies
problems, especially if they select a module that depends on IPV6 as
well.  In theory, if a package A depends on IPV6, any package doing
'select A' (DEPENDS+= A) should also depend on IPV6; otherwise selecting
A will fail.  Sometimes the build system is forgiving this, but
eventually, and unexpectedly, it may blow up on some other commit.

Alternatively one can conditionally add IPv6 dependencies only if
CONFIG_IPV6 is selected: (DEPENDS+= +IPV6:package6).

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2020-04-09 12:51:10 +02:00
Pawel Dembicki
5a5a9b7a75 packages: mt76: add 14c3:7610 pci id to list
This commit add patch with 14c3:7610 pci id addition.

It was sent upstream.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[bumped PKG_RELEASE]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-08 14:05:29 +01:00
Rosen Penev
92792ead34 kmod: add netlink-diag package
This is used by the ss utility from iproute2.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-04-07 20:39:47 +02:00
Tan Zien
02f07c6401 kernel: netdev: add missing config for mlx5 driver
The mlk5 kmod lacks all necessary build symbols
for kernel 4.14 (again).

Add missing symbols to avoid build failure on these targets.

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
[rewrite commit message - reorder symbols]
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-04-06 12:39:00 +02:00
Tan Zien
d24e43a7f6 kernel: Fix miss config and module for mlx driver
Missing config symbols could lead to build failures on kernel
4.14/4.19.

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
[rephrase commit message - reorder symbols]
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-04-04 17:12:43 +02:00
Tan Zien
3ec70052c5 kernel: add module for Mellanox mlx Network Driver
add module to support Mellanox Connect-X card
mlx4 supports ConnectX-3 series and previous cards
mlx5 supports Connect-IB/ConnectX-4 series and later cards

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
2020-04-03 15:33:27 +02:00
Kevin Darbyshire-Bryant
b74386acc6 kmod-sched-cake: switch to in-tree cake for 4.19+
Use in tree version of cake for kernels 4.19+ and backport features from
later kernel versions to 4.19.

Unfortunately PROVIDES dependency handling produces bogus circular
dependency warnings so whilst this package and kmod-sched-cake-oot
should be able to PROVIDE kmod-sched-cake this doesn't work.

Instead, remove the PROVIDES option and modify package sqm-scripts to
depend on the correct module independently.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-04-01 21:59:45 +01:00
Kevin Darbyshire-Bryant
475738c9af kmod-sched-cake: rename to kmod-sched-cake-oot
In preparation for dropping the out of tree cake module and using
in tree cake from upstream, rename the package to kmod-sched-cake-oot
(out of tree)

Initially add a PROVIDES kmod-sched-cake so that package dependencies
can be satisfied.

Ultimately this package will be removed when linux 4.14 is removed.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-04-01 21:59:45 +01:00
Daniel Golle
a24a9bbc8c mac80211: rt2x00: prune more unnecessary exports
The calibration patches for MT7620 unnecessarily export symbols and
populate never accessed function pointers. Remove all that and make
functions static as the only place where each of those functions is
called is within rt2800lib.c.
Also make code more readable by fixing indentation, removing
unnecessary parantheses and simplifying some instructions using
shorthands here and there.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-01 19:47:59 +01:00
Álvaro Fernández Rojas
332ed4a835 bcm27xx-gpu-fw: update to latest version from RPi foundation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-03-31 13:22:59 +02:00
Jose Olivera
5c57d15aed ath10k-ct: Support AQL on ath10k CT_KVER-5.4
Commit ea50780 backported Airtime Queue Limits (AQL) from Linux 5.5
to OpenWrt's backports 5.4. However, this only enabled AQL for the
vanilla ath10k driver. This patch also enables it for ath10k-ct.

Tested on:
* 2xTP-Link Archer A7v5 (QCA9563/QCA988X)
* Backports version 5.4-rc8 & 5.4.27
* ath10k-ct and ath10k-ct-htt firmware version 014 to 017
* ath10k-ct driver versions dc025dc to 3d173a4 (CT_KVER-5.4)
* WPA2, 802.11krv

Tested since January 25, 2020.

Signed-off-by: Jose Olivera <oliverajeo@gmail.com>
2020-03-30 01:46:50 +02:00
Hauke Mehrtens
f0aff72c2b mac80211: Update to version 5.4.27
The removed patches are all integrated in the upstream version now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-03-29 18:22:10 +02:00
Hauke Mehrtens
94949801de mac80211: Fix rt2x00 exports
Do not export static functions, they are anyway not referenced by any
code in a different module.

This fixes the following compile warning:
WARNING: "rt2800_rf_aux_tx0_loopback" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_write_dc" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_rf_configstore" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_do_sqrt_accumulation" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_rf_configrecover" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_loft_search" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_iq_search" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_setbbptonegenerator" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_rf_aux_tx1_loopback" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL

Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-03-29 18:22:01 +02:00
Petr Štetiar
19760563f7 mac80211: rtl8723bs: fix missing MMC dependency
Building of ath79-tiny has uncovered following:

 Package kmod-rtl8723bs is missing dependencies for the following libraries:
 mmc_core.ko

So add this missing dependency.

Fixes: 8c26d67a67 ("mac80211: realtek: add staging driver for RTL8723BS SDIO module")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 22:58:36 +01:00
Nick Bowler
2785d003d3 kernel: package gpio-f7188x driver
This driver enables support for the GPIO capabilities found in many
Fintek Super-IO chips.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
2020-03-28 13:03:02 +01:00
Nick Bowler
3ad0cf7d93 kernel: package f71808e-wdt driver
This driver enables support for the watchdog timers found in many
Fintek Super-IO chips.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
2020-03-28 13:03:02 +01:00
Nick Bowler
922dfe0fa0 kernel: package f71882fg hwmon driver
This driver enables hardware monitoring support using the sensors
found in many Fintek Super-IO chips.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
2020-03-28 13:03:02 +01:00
Petr Štetiar
8c26d67a67 mac80211: realtek: add staging driver for RTL8723BS SDIO module
Adds kernel module for Realtek RTL8723BS SDIO Wireless LAN NIC driver
available in the staging.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
John Crispin
22d896eb21 hostapd: fix no_reload logic
the code would unconditionally tear down all interfaces upon a reconf.
This should only be done when the reconf call fails.

Signed-off-by: John Crispin <john@phrozen.org>
2020-03-27 16:18:57 +01:00
Rafał Miłecki
038318f766 mac80211: fix brcmfmac monitor interface crash
This fixes bug in brcmfmac *exposed* by ipv6/addrconf fix.

Fixes: ec8e8e2ef0 ("kernel: backport out-of-memory fix for non-Ethernet devices")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2020-03-27 14:57:01 +01:00
Álvaro Fernández Rojas
3114a4ef6c ath10k-ct: update to version 2020-03-25
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Petr Štetiar <ynezz@true.cz>
2020-03-27 10:18:39 +01:00
Álvaro Fernández Rojas
8c02e7fe9f bcm27xx-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-03-23 08:55:14 +01:00
Christian Lamparter
d107aaa910 kernel: backport and package drivetemp hwmon from v5.5
This patch backports the hwmon drivetemp sensor module from vanilla
linux 5.5 to be available on OpenWrt's 5.4 kernel.

Extract from The upstream commit by Guenter Roeck <linux@roeck-us.net>:
hwmon: Driver for disk and solid state drives with temperature sensors

"Reading the temperature of ATA drives has been supported for years
by userspace tools such as smarttools or hddtemp. The downside of
such tools is that they need to run with super-user privilege, that
the temperatures are not reported by standard tools such as 'sensors'
or 'libsensors', and that drive temperatures are not available for use
in the kernel's thermal subsystem.

This driver solves this problem by adding support for reading the
temperature of ATA drives from the kernel using the hwmon API and
by adding a temperature zone for each drive.

With this driver, the hard disk temperature can be read [...]
using sysfs:

$ grep . /sys/class/hwmon/hwmon9/{name,temp1_input}
/sys/class/hwmon/hwmon9/name:drivetemp
/sys/class/hwmon/hwmon9/temp1_input:23000

If the drive supports SCT transport and reports temperature limits,
those are reported as well.

drivetemp-scsi-0-0
Adapter: SCSI adapter
temp1:        +27.0<C2><B0>C (low  =  +0.0<C2><B0>C, high = +60.0<C2><B0>C)
                             (crit low = -41.0<C2><B0>C, crit = +85.0<C2><B0>C)
                             (lowest = +23.0<C2><B0>C, highest = +34.0<C2><B0>C)

The driver attempts to use SCT Command Transport to read the drive
temperature. If the SCT Command Transport feature set is not available,
or if it does not report the drive temperature, drive temperatures may
be readable through SMART attributes. Since SMART attributes are not well
defined, this method is only used as fallback mechanism."

This patch incorperates a patch made by Linus Walleij:
820-libata-Assign-OF-node-to-the-SCSI-device.patch
This patch is necessary in order to wire-up the drivetemp
sensor into the device tree's thermal-zones.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-03-21 17:48:34 +01:00
Luiz Angelo Daros de Luca
5a326688ea kernel: load rtl8366_smi and rtl8367b on boot
This external switch driver should be loaded on boot for network support
in failsafe mode.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[alter commit message]
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2020-03-21 12:58:29 +08:00
Oldřich Jedlička
23a885bf89 mac80211: do not try to setup hostapd-managed interfaces.
For virtual access points (when multiple SSIDs are used for one
physical AP), there exist one physical network interface and
multiple virtual interfaces, which are fully under control of
hostapd. When networking is setup, the script
`/lib/netifd/wireless/mac80211.sh` is called, which tries to bring
the interface up by a call to `ip link set dev <iface> up`. This
call might fail for virtual APs, because the virtual interface
might not have been created by hostapd yet. There are some artifical
delays in the script most probably to handle this, but when DFS
channel availability check on 5GHz band is issued, hostapd can
delay creating virtual interfaces by a minute.

In order to fix this (or work around it), do not try to bring the
interface up (this is responsibility of hostapd anyway) and
do not try to set txpower on the virtual interface.

Fixes FS#2698.

Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
2020-03-20 21:55:17 +00:00
Jeffery To
d33200824f cryptodev-linux: Fix error when compiling with 5.4 kernel
Currently, cryptodev-linux fails to compile with a
'"crypto_givcipher_type" undefined' error for targets on the 5.4 kernel,
e.g. armvirt[1].

This backports an upstream patch[2] that fixes this error.

[1]: https://downloads.openwrt.org/snapshots/faillogs/aarch64_generic/base/cryptodev-linux/compile.txt
[2]: f971e0cd4a

Signed-off-by: Jeffery To <jeffery.to@gmail.com>
2020-03-18 23:12:48 +01:00
Martin Blumenstingl
0dbe8b9029 lantiq: ltq-tapi: fix compilation with newer Linux kernels
Compiling the ltq-tapi driver against Linux 5.4 results in a compile
error complaining that the size of struct sched_param is not known.
Switch the existing "sched/types.h" include to reference
include/uapi/linux/sched/types.h to fix compilation against Linux 5.4.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2020-03-16 22:28:16 +01:00
Martin Blumenstingl
588d574eb9 lantiq: ltq-deu: fix compatibility with Linux 5.3+
Upstream commit 84ede58dfcd1d ("crypto: hash - remove
CRYPTO_ALG_TYPE_DIGEST") drops the CRYPTO_ALG_TYPE_DIGEST define because
it has the same value as CRYPTO_ALG_TYPE_HASH. This was the case for
earlier kernels as well. Switch to CRYPTO_ALG_TYPE_HASH to fix building
against Linux 5.4.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2020-03-16 22:28:16 +01:00
Martin Blumenstingl
3fa5f058f6 lantiq: ltq-vdsl: fix compilation with Linux 5.0+
Upstream commit e4b92b108c6cd6 ("timekeeping: remove obsolete time
accessors") removed do_gettimeofday(). In Linux 4.19 this was only a
wrapper around ktime_get_real_ts64(). Use ktime_get_real_ts64() now that
the wrapper is gone to fix compilation against Linux 5.4.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2020-03-16 22:28:16 +01:00
Mathias Kresin
a6698551e5 ltq-adsl: fix compilation with Linux 5.0+
Upstream commit e4b92b108c6cd6 ("timekeeping: remove obsolete time
accessors") removed do_gettimeofday(). In Linux 4.19 this was only a
wrapper around ktime_get_real_ts64(). Use ktime_get_real_ts64() now that
the wrapper is gone to fix compilation against Linux 5.4.

Move the ifxmips_mei_interface header to the include directory, it can't
be found otherwise during compilation. The reason for the changed
behaviour is not yet clear, however having header files in an include
directory is more straight forward.

To use the of_device_id struct, the mod_devicetable header need to be
included. Instead of including this header, include the of_platform
header, which includes the mod_devicetable on its own.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2020-03-16 22:28:16 +01:00
Mathias Kresin
a3539c82cb ltq-atm: add Linux 5.0+ compatibility
Upstream commit 96d4f267e40f95 ("Remove 'type' argument from access_ok()
function") removes the first argument to access_ok.
Adjust the code so it builds with Linux 5.4.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2020-03-16 22:28:16 +01:00
Mathias Kresin
c01c01891c kernel: kmod-serial-8250: fix linux 5.3 dependencies
Beginning with linux 5.3, kmod-serial-8250 uses functions provided by
serial_mctrl_gpio.ko if GPIO support is enabled.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2020-03-16 22:28:16 +01:00
Sungbo Eo
6508766d24 kernel: make kmod-i2c-mux selected by dependent modules
Currently kmod-i2c-mux-* will not get into images unless kmod-i2c-mux is added
to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to
"select", we do not have the issue anymore.

Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES
and similar variables, as it is now pulled by dependent modules such as:
- kmod-i2c-mux-pca954x

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-03-16 16:26:29 +01:00
Sungbo Eo
4caaa778f7 kernel: make kmod-i2c-core selected by dependent modules
Currently kmod-i2c-* will not get into images unless kmod-i2c-core is added to
DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to
"select", we do not have the issue anymore.

Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES
and similar variables, as it is now pulled by dependent modules such as:
- kmod-hwmon-lm75
- kmod-i2c-gpio
- kmod-i2c-gpio-custom
- kmod-i2c-mux
- kmod-i2c-ralink

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[do not touch ar71xx]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-03-13 15:40:43 +01:00
Sungbo Eo
4159054fbb kernel: make kmod-hwmon-core selected by dependent modules
Currently kmod-hwmon-* will not get into images unless kmod-hwmon-core is added
to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to
"select", we do not have the issue anymore.

Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES
and similar variables, as it is now pulled by dependent modules such as:
- kmod-hwmon-gpiofan
- kmod-hwmon-lm63
- kmod-hwmon-lm75
- kmod-hwmon-lm85
- kmod-hwmon-lm90

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[do not touch ar71xx, adjust line wrapping]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-03-13 14:23:33 +01:00
Kevin Darbyshire-Bryant
5c2b130ec9 kernel: ifb: set default numifbs to 0
By default on module load, 2 ifb interfaces are created and typically
remain unused, cluttering 'ip link' outputs and generally confusing
things.  sqm-scripts for example, creates its own ifb interface/s
instead of using these 2 defaults ifbs.

Tell the ifb module to not create any default ifbs on load via the
numifbs parameter.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-03-13 09:46:55 +00:00
Sungbo Eo
228bb84744 kernel: make kmod-ata-core selected by dependent modules
Currently kmod-ata-* will not get into images unless kmod-ata-core is added to
DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to
"select", we do not have the issue anymore.

Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES
and similar variables, as it is now pulled by dependent modules such as:
- kmod-ata-ahci
- kmod-ata-ahci-mtk
- kmod-ata-sunxi

While at it, use AddDepends/ata for kmod-ata-pdc202xx-old.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-03-11 19:40:03 +01:00
Felix Fietkau
0f8c806eb8 mt76: update to the latest version
a94e43f277e2 mt76: mt76x02: reset MCU timeout counter earlier in watchdog reset

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-03-11 13:33:36 +01:00
Yousong Zhou
847f3e603d kernel: kmod-fs-exfat: fix typo LINUX_4_{,1}4
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Reported-by: Petr Štetiar <ynezz@true.cz>
2020-03-09 22:40:48 +08:00
DENG Qingfang
b255260bb7 kernel: add exFAT fs driver
This was available since kernel 5.4.  The one provided in packages feed
will be considered deprecated and renamed to kmod-fs-exfat0.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(use name kmod-fs-exfat.  use "@!(LINUX_4_4||LINUX_4_19)" for dependency)
2020-03-09 22:04:59 +08:00