Commit Graph

60241 Commits

Author SHA1 Message Date
INAGAKI Hiroshi
a9f780a78e ath79: drop unnecessary &uart node from dtsi of QCA955x devices
&uart (uart0) is already enabled in qca955x.dtsi by default.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-03-08 17:35:01 +01:00
INAGAKI Hiroshi
bb6d11e534 ath79: add aliases to qca955x.dtsi for uart0/1
Add aliases with "serialN = &uartN;" of uart0/1 on QCA955x SoCs to
qca955x.dtsi, to enable uart1 on Linux Kernel.

without this:

[    0.342915] ar933x-uart 18500000.uart: unable to get alias id, err=-19

Additionally, remove "serial0 = &uart;" alias from QCA955x device
dts/dtsi files.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-03-08 17:35:01 +01:00
INAGAKI Hiroshi
35ae18fc06 ath79: add HighSpeed UART (uart1) support for QCA955x
Add HighSpeed UART support to QCA955x series SoCs as a secondary UART
(uart1). This UART is compatible with qca,ar9330-uart.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-03-08 17:35:01 +01:00
INAGAKI Hiroshi
e0ee4195fc ath79: rename label of primary UART on QCA955x to "uart0"
Rename the DT label of the primary UART on Qualcomm Atheros QCA955x
series SoCs to "uart0" from "uart" for the preparation to add HighSpeed
UART (uart1) support.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-03-08 17:35:01 +01:00
Christian Lamparter
102009f3ea mpc85xx: p1020: convert Aerohive AP330/AP350 to simpleImage
with 6.1, the kernel no longer fitted into the 16 MiB and
kicking down the can and increasing KERNEL_SIZE to 20 MiB
didn't help as the device failed to boot.

Using 'kernel-bin | gzip | uimage gzip' didn't work since the
uboot does not have enough heap to decompress these big kernels.

And finally playing around with uboot was more a hassle than
converting this device to take the simpleImage-boot-route in
the future.

Note: The device now takes even longer on the first boot-up after
the flash due to JFFS2 initializing all the remaining flash.
Be prepared to wait up to 10 minutes before the green status LED
stops blinking and will shine a solid green!

(On the plus site: the device now has ~10 MiB of additional
space for rootfs+rootfs_data).

Note2: This patch includes a kernel patch refresh.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2024-03-08 17:24:14 +01:00
Pawel Dembicki
a99dfd195e mpc85xx: add 6.1 testing kernel
Configure 6.1 testing kernel for mpc85xx target.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Pawel Dembicki
6a8b831593 mpc85xx: p1010: change wrapper address of simple image devices
Kernel and initramfs size grows. Now uncompressed initramfs image and
regular kernel image overlaps configured area:

Initramfs:
  WRAP    arch/powerpc/boot/simpleImage.br200-wp
INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the
wrapper(0x1000000)
INFO: Fixing the link_address of wrapper to (0x1500000)
  WRAP    arch/powerpc/boot/simpleImage.tl-wdr4900-v1
INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the
wrapper(0x1000000)
INFO: Fixing the link_address of wrapper to (0x1500000)
  WRAP    arch/powerpc/boot/simpleImage.ws-ap3715i
INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the
wrapper(0x1000000)
INFO: Fixing the link_address of wrapper to (0x1500000)

Regular image:
  WRAP    arch/powerpc/boot/simpleImage.br200-wp
INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the
wrapper(0x1000000)
INFO: Fixing the link_address of wrapper to (0x1100000)
  WRAP    arch/powerpc/boot/simpleImage.tl-wdr4900-v1
INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the
wrapper(0x1000000)
INFO: Fixing the link_address of wrapper to (0x1100000)
  WRAP    arch/powerpc/boot/simpleImage.ws-ap3715i
INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the
wrapper(0x1000000)
INFO: Fixing the link_address of wrapper to (0x1100000)

Let's change wrapper address to safe value.

Tested on: TL-WDR4900, BR200-WP

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Pawel Dembicki
894ff58067 mpc85xx: kernel: refresh 6.1 config
Kernel config needs to be refreshed after copy from 5.15.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Pawel Dembicki
44ed2dc91c mpc85xx: refresh 6.1 patches
Most changes done by "make target/linux/refresh"

Manually refreshed:
102-powerpc-add-cmdline-override.patch

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Pawel Dembicki
7b01179e62 mpc85xx: copy patches 5.15 to 6.1
Just copy of config.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Pawel Dembicki
123daef93c mpc85xx: copy config 5.15 to 6.1
Simple copy of patches.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Pawel Dembicki
3361ff9572 mpc85xx: Get rid of 'of_flat_dt_is_compatible'
This patch replaces 'of_flat_dt_is_compatible' with 'of_machine_is_compatible'.
The TL-WDR4900 platform file won't compile in the 6.1 kernel. The platform
files for the rest of the routers have been reworked or based on newer
solutions.

Let's make the TL-WDR4900 consistent with them.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Robert Marko
ce2b302ca4 kernel: crypto: use ARM64 SHA256 CE optimized module for more targets
At start I only set qualcommax to use the Crypto Extensions optimized
version of SHA256 as I knew it supports the optional Crypto Extensions.

However, after looking into the tree there are more targets/subtargets
that I could find at least a specification sheet that says the support
Cryptographic Extensions, so lets add them.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-08 17:16:18 +01:00
Robert Marko
90c09ede93 kernel: crypto: use ARM64 SHA1 CE optimized module for more targets
At start I only set qualcommax to use the Crypto Extensions optimized
version of SHA1 as I knew it supports the optional Crypto Extensions.

However, after looking into the tree there are more targets/subtargets
that I could find at least a specification sheet that says the support
Cryptographic Extensions, so lets add them.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-08 17:16:18 +01:00
Hauke Mehrtens
9cfa5f7417 lantiq: Fix build after kernel 5.15.150
This fixes the following compile problem:
````
  CC      arch/mips/kernel/vpe-mt.o
arch/mips/kernel/vpe-mt.c: In function 'vpe_run':
arch/mips/kernel/vpe-mt.c:32:23: error: unused variable 'physical_memsize' [-Werror=unused-variable]
   32 |         unsigned long physical_memsize = 0L;
      |                       ^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:289: arch/mips/kernel/vpe-mt.o] Error 1
````

physical_memsize was removed from upstream kernel, see:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=5b4f6c5ff65c8551018ccea40c569afd759734c0

Fixes: 387fde0da0 ("kernel: bump 5.15 to 5.15.150")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-08 14:49:09 +01:00
Christian Marangi
abbe909569
libiwinfo: update to Git HEAD (2024-03-08)
163a640fef30 devices: add device id for Qualcomm Atheros QCA6174
8ffb8bfd1115 devices: add add Qualcomm Atheros IPQ6018 WiSoC compatible

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-03-08 14:26:34 +01:00
Furong Xu
22f24f9107 mediatek: clean duplicated #include in Xiaomi Redmi AX6000's dts
Clean duplication of #include <dt-bindings/leds/common.h>.
Thanks musashino205

Fixes: 1493e8f8cb ("mediatek: convert LED color/function format for Xiaomi Redmi AX6000")
Signed-off-by: Furong Xu <xfr@outlook.com>
2024-03-08 16:51:35 +08:00
Qingfang Deng
a646e4f697 kernel: enable KASAN option for more architectures
KASAN has supported more architectures, such as ARM, PPC32 and RISC-V 64.
Enable KASAN option for those architectures.

Signed-off-by: Qingfang Deng <dqfext@gmail.com>
2024-03-08 16:07:48 +08:00
Sergey Ponomarev
9da90971ab ubox: make logread as an alternative
The logread can be replaced with syslog-ng.
To support this it should be an alternative itself.

Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
2024-03-08 15:38:37 +08:00
Furong Xu
8d355b870a mediatek: filogic: switch to fitblk for Xiaomi Redmi AX6000
Use the new fitblk driver.

Run-tested: filogic/mt7986a-xiaomi-redmi-router-ax6000-ubootmod

Signed-off-by: Furong Xu <xfr@outlook.com>
2024-03-08 15:28:30 +08:00
Furong Xu
1493e8f8cb mediatek: convert LED color/function format for Xiaomi Redmi AX6000
Commit 2d63d42f5e ("mediatek: convert to new LED color/function
format where possible") leaves Xiaomi Redmi AX6000 un-converted,
the two LEDs become dead.
Now, LEDs are alive again.

Fixes: 2d63d42f5e ("mediatek: convert to new LED color/function
format where possible")

Signed-off-by: Furong Xu <xfr@outlook.com>
2024-03-08 15:26:57 +08:00
Tony Ambardar
4adba64156 kernel: 6.1: add missing config symbol for tracing
Add missing option CONFIG_FPROBE to generic config, found building x86_64
arch with tracing enabled.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2024-03-07 21:07:26 +01:00
Hauke Mehrtens
662e052588 linux-firmware: Update to version 20240220
This updates the following firmware files:
airoha-en8811h-firmware/lib/firmware/airoha/EthMD32.DSP.bin
airoha-en8811h-firmware/lib/firmware/airoha/EthMD32.dm.bin
amdgpu-firmware (Many files)
ar3k-firmware/lib/firmware/qca/hpnv21.bin
ar3k-firmware/lib/firmware/qca/hpnv21g.bin
ath10k-board-qca4019/lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin
ath10k-board-qca9888/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
ath10k-firmware-qca6174/lib/firmware/ath10k/QCA6174/hw3.0/firmware-6.bin
ath11k-firmware-wcn6750/lib/firmware/ath11k/WCN6750/hw1.0/board-2.bin
ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.0/amss.bin
ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.0/board-2.bin
ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.1/amss.bin
ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.1/board-2.bin
ibt-firmware/lib/firmware/intel/ibt-0040-0041.ddc
ibt-firmware/lib/firmware/intel/ibt-0040-0041.sfi
ibt-firmware/lib/firmware/intel/ibt-0040-1050.sfi
ibt-firmware/lib/firmware/intel/ibt-0040-4150.sfi
ibt-firmware/lib/firmware/intel/ibt-0041-0041.sfi
ibt-firmware/lib/firmware/intel/ibt-0180-0041.sfi
ibt-firmware/lib/firmware/intel/ibt-0180-1050.sfi
ibt-firmware/lib/firmware/intel/ibt-0180-4150.sfi
ibt-firmware/lib/firmware/intel/ibt-1040-0041.sfi
ibt-firmware/lib/firmware/intel/ibt-1040-4150.sfi
iwlwifi-firmware-be200/lib/firmware/iwlwifi-gl-c0-fm-c0-83.ucode
iwlwifi-firmware-be200/lib/firmware/iwlwifi-gl-c0-fm-c0.pnvm

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-07 19:37:36 +01:00
Hauke Mehrtens
cd450923ab kernel: Remove unused schedulers
These schedulers were removed in kernel 5.15.150 and 6.1.180.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-07 19:30:54 +01:00
Hauke Mehrtens
387fde0da0 kernel: bump 5.15 to 5.15.150
Removed because it is upstream:
bcm53xx/patches-5.15/030-v5.16-0019-ARM-dts-BCM53573-Describe-on-SoC-BCM53125-rev-4-swit.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cb1003c07e746e4e82bdd3959c9ea37018ed41a3

Removed because it is upstream:
bcm53xx/patches-5.15/037-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c65a23e98e38dc991f495d6bdb3cfa6163a88a0c

Removed because it is upstream:
bcm53xx/patches-5.15/037-v6.6-0005-ARM-dts-BCM53573-Drop-nonexistent-usb-cells.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=71475bcee001cae3844644c2787eef93b26489d1

Adapted hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch to match
the changes from the upstream flow offload patch:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7c71b831220edeab7ce603d818dc1708d9ea4137

Manually Adapted the following patch:
bcm53xx/patches-5.15/035-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-07 19:30:54 +01:00
Hauke Mehrtens
26d1d52403 kernel: bump 5.15 to 5.15.149
Removed because it is upstream:
generic/pending-5.15/540-ksmbd-only-v2-leases-handle-the-directory.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=81ea755b8fa57ce186f56f14b709cf491c2a5505

Manually Adapted the following patch:
ath79/patches-5.15/900-unaligned_access_hacks.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-07 19:30:54 +01:00
Robert Marko
e247763617 ath25: drop target
ath25 has been on life support for the last couple of releases, eventually
leading to marking it as source-only in 2023.

It has been basically only touched to do a kernel bump so that we can make
the new OpenWrt release which was a challenge due to small RAM amount.

However, with the attempt of kernel 6.1 update it turns out that kernel
cannot even finish booting due to RAM constraints, so its time to let this
target go.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-07 12:15:51 +01:00
Sven Eckelmann
71411cb8b8 ath11k-firmware: Move from kvalo to new upstream repository
It was announced [1] that the original staging repositories are no longer
used for staging of new firmware binaries. And that the old repository will
be removed [2] in June 2024.

The ath11k-firmware package must therefore point to the new repository
before the old one is no longer accessible.

[1] https://lore.kernel.org/r/bac97f31-4a70-4c4c-8179-4ede0b32f869@quicinc.com
[2] 8d2cc160f3

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2024-03-07 09:37:42 +01:00
Robert Marko
5b1d6d4607 kernel: crypto: add SHA512 ARM64 ASM optimized module
Kernel has an ASM optimized version of SHA512 that was ported from
OpenSSL, so lets package it as it provides significant perfomance
improvement compared to the generic implementation.

There is a Cryptographic Extension based version as well, but that relies
on ARMv8.2 ISA which I am not aware any of the OpenWrt supported SoC-s use.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-06 22:00:58 +01:00
Robert Marko
4443470a57 kernel: crypto: add SHA2(224 and 256) ARM64 CE optimized module
Kernel has optimized version of SHA2(224 and 256) using the ARMv8 Crypto
Extensions, so lets package it.

Use it by default for qualcommax as it uses Cortex-A53 core and has ARMv8
CE extensions present.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-06 18:38:28 +01:00
Robert Marko
09207c0348 kernel: crypto: add SHA256 ARM64 ASM optimized module
Kernel has an ASM optimized version of SHA256 that was ported from
OpenSSL, so lets package it as it provides significant perfomance
improvement compared to the generic implementation.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-06 18:30:21 +01:00
Robert Marko
9425064bdb kernel: crypto: add SHA1 ARM64 CE optimized module
Kernel has optimized version of SHA1 using the ARMv8 Crypto Extensions,
so lets package it.

Use it by default for qualcommax as it uses Cortex-A53 core and has ARMv8
CE extensions present.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-06 12:16:11 +01:00
Weijie Gao
d40d64fc62 cryptodev-linux: update to 1.13
Update to 1.13 with upstream backports.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
2024-03-06 10:17:45 +01:00
Robert Marko
fdb563c1a5 kernel: qca-ssdk: refresh PCS patch
Recently added PCS patch requires a refresh, so lets do it.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-05 21:43:54 +01:00
Robert Marko
3e6f64d443 kernel: crypto: package SHA3
SHA3 is now required by jitterentropy_rng in kernel 6.6, so lets start
preparing by packaging SHA3 support as its supported in 5.15 and 6.1
kernels as well.

AFAIK, only ARMv8.2 has a crypto extension for SHA3, however I am not aware
of any SoC we support that uses ARMv8.2 ISA so its not enabled currently.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-05 20:23:46 +01:00
Rafał Miłecki
4efbfcd996 base-files: sysupgrade: handle errors when generating backup
1. Return error if any step of generating tar file fails
2. Use pipefail to avoid calling "gzip" if tar failed

Fixes: e36cc53092 ("base-files: sysupgrade: use tar helper to include installed_packages.txt")
Reported-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Cc: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-05 11:54:55 +01:00
Dirk Buchwalder
93610492b6 qualcommax: ipq60xx: add support for netgear wax214
Netgear WAX214 is a 802.11 ax dual-band AP
    with PoE. (similar to Engenius EWS357APV3)

    Specifications:

        •     CPU: Qualcomm IPQ6010 Quad core Cortex-A53
        •     RAM: 512MB of DDR3
        •     Storage: 128MB NAND (Macronix MX30UF1G18AC)
        •     Ethernet: 1x 1G RJ45 port (QCA8072) PoE
        •     WIFI:
              2.4GHz: Qualcomm QCN5022 2x2 802.11b/g/n/ax 574 Mbps PHY rate
              5GHz: Qualcomm QCN5052 2x2 802.11a/b/g/n/ac/ax 1201 PHY rate

        •     LEDs:
              4 x GPIO-controlled LEDs
                - 1 Power LED (orange)
                - 1 LAN LED (blue)
                - 1 WIFI 5g LED (blue)
                - 1 WIFI 2g LED (blue)
                black_small_square  Buttons: 1x soft reset
                black_small_square  Power: 12V DC jack or PoE (802.3af )

            An populated serial header is onboard, format is
             1.25mm 4p (DF13A-4P-1.25H)
            RX/TX is working, bootwait is active, secure boot is not
            enabled.

            The root password of the stock firmware is unknown,
            but failsafe mode can be entered to reset the password.

            Installation Instructions:

                - obtain serial access
                - stop auto boot (press "4", Entr boot command line
		  interface)
                - setenv active_fw 0 (to boot from the primary rootfs,
                  or set to 1 to boot from the secondary rootfs
                  partition)
                - saveenv

                - tftpboot the initramfs image
                - bootm

                - copy
		  openwrt-qualcommax-ipq60xx-netgear_wax214-squashfs-factory.ubi
                  to the device
                - write the image to the NAND:
                   - cat /proc/mtd and look for rootfs partition (should
		     be mtd11,
                     or mtd12 if you choose active_fw 1)
                   - ubiformat /dev/mtd11 -f -y
		     openwrt-qualcommax-ipq60xx-netgear_wax214-squashfs-factory.ubi
                - reboot

            Note: the firmware is senao-based. But I was unable to build
                  a valid senao-header into the image.
                  Maybe they changed the header format and senaoFW isn't
                  working any more.

Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
2024-03-05 06:34:35 +01:00
Dirk Buchwalder
e8a2fd241d ipq-wifi: update to version 2024-03-04
The new version adds support for the Netgear WAX214.

Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
2024-03-05 06:34:35 +01:00
John Audia
13cdc8955c kernel: bump 6.1 to 6.1.80
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.80

Manually rebased:
	generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch[1]

All other patches automatically rebased.

1. Acknowledgement to @heheb and @DragonBluep. Upstream commit for ref: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.80&id=9c5662e95a8dcc232c3ef4deb21033badcd260f6

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
2024-03-05 00:23:59 +01:00
John Audia
bd6b37f463 kernel: Remove dsmark support
dsmark support was removed in kernel 5.15.150 and 6.1.80. Remove it from
the kmod package as well

Signed-off-by: John Audia <therealgraysky@proton.me>
2024-03-05 00:23:59 +01:00
Matthias Schiffer
2b46cbef81
build: do not depend on $(STAGING_DIR)/.prepared when in SDK
The dependency can't be satisfied when building using the SDK, breaking
package builds. As the staging and bin dirs are distributed with the SDK
archive, ignoring the dependency is fine when SDK is set.

Fixes: fbb924abff ("build: add $(STAGING_DIR) and $(BIN_DIR) ...")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2024-03-04 23:45:15 +01:00
Álvaro Fernández Rojas
fe0081eecf bcm27xx: use PARTUUID for root in cmdline
This allows booting from USB/NVME while keeping SD compatibility.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-03-04 16:28:57 +01:00
Álvaro Fernández Rojas
4b3c1251a4 base-files: sysupgrade: allow overriding config restore
Some platforms like Raspberry Pi require patching some backup files like
cmdline.txt in order to set the correct root PARTUUID.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-03-04 16:27:39 +01:00
Álvaro Fernández Rojas
fb80be6944 bcm27xx: pass signature to partition generation
Passes IMG_PART_SIGNATURE to ptgen instead of using the default "OWRT"
signature.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-03-04 16:27:39 +01:00
Álvaro Fernández Rojas
552c6b2472 bcm27xx: base-files: fix platform_copy_config
/boot/kernel*.img wildcard only works without quotation marks.

Fixes: 1a5e51ab00 ("bcm27xx: base-files: fix platform_copy_config")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-03-04 16:20:55 +01:00
Álvaro Fernández Rojas
5cd8e037b5 bcm63xx: drop target
BCM63xx maintainance is a PITA since there's no full Device Tree support and
therefore every board needs it's own definition in board_bcm963xx.c
There's no DSA support for this board and there have been very few
contributions in the last years.
Moreover, BCM63xx SoCs >= BCM6358 are already supported in bmips target, so
any efforts to keep this target alive aren't worth the time.
Let's focus the community efforts on improving bmips instead.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-03-04 16:12:21 +01:00
Jo-Philipp Wich
6f6406a132 base-files: sysupgrade: fix streaming backup archives to stdout
Due to previous refactoring in sysupgrade, writing backup archives to
stdout became impossible since the hardcoded gzip output redirection
did not account for the `-` special case filename.

Fix this issue by substituting `-` with `/proc/self/fd/1` in the tar
archive output path variable.

Also remove a redundant `rm -f` of the target file path that occurs
before the file could've possibly been written.

Fixes: #14773
Fixes: https://github.com/openwrt/luci/issues/6961
Fixes: e36cc53092 ("base-files: sysupgrade: use tar helper to include installed_packages.txt")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2024-03-04 14:58:10 +01:00
Matthias Schiffer
fbb924abff
build: add $(STAGING_DIR) and $(BIN_DIR) preparation to target and package subdir compile dependencies
In a pristine build, these directories are created as dependencies of
the tools subdir compile, however this step never runs when the tools
compile stamp already exists. Since commit ed6ba2801c ("tools: keep
stamp file in $(STAGING_DIR_HOST)"), this will happen after `make clean`:
$(STAGING_DIR) has been deleted, but the tools stamp still exists, so
the next build will fail because $(STAGING_DIR) has not been set up
correctly.

Fix builds after `make clean` by adding the preparation as dependencies
for the target and package directories as well.

Fixes: ed6ba2801c ("tools: keep stamp file in $(STAGING_DIR_HOST)")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2024-03-03 23:13:59 +01:00
Daniel Golle
37bbed6f95 kernel: lantiq: ltq-vmmc: introduce user group for vmmc
asterisk-chan-lantiq is by now the only user of the VMMC interface.
And asterisk runs as user 'asterisk' which doesn't give it permission
to open the /dev/vmmc* devices.
Introduce a new user group 'vmmc' and give permission to access the
/dev/vmmc* devices to that group.
Another commit for asterisk-chan-lantiq will add the 'asterisk' user
to that group.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-03-03 15:44:52 +00:00
Tobias Schramm
336a531c15 mvebu: add support for SolidRun ClearFog Pro
The SolidRun ClearFog Pro is a router based on the SolidRun CN9130 SOM.

Specs:
 - SoC: Quad-Core Cortex-A72 CN9130 SoC
 - RAM: 4GiB DDR4
 - Serial: Micro-USB port on front (FT232R, 115200 8n1)
 - Storage: 8GiB eMMC, microSD card slot, 8MiB SPI NOR flash
 - Ethernet: 7x GbE (1 port dedicated on SoC, 6 port switch with single GbE CPU port)
 - SFP: 1x SFP+
 - USB: 1x USB-A 3.1 Gen 1
 - PCIe: 2x mini PCIe (one slot with USB and SIM card socket)
 - SATA: 1x M.2 Key-B

In addition to the usual connectivity options this device also features
an internal mikroBUS expansion connector.

SATA is currently untested due to lack of a suitable M.2 SSD.

Installation
============

1. Write sdcard sysupgrade image to microSD card using dd or similar
2. Insert microSD card into router and apply power
3. Device boots into OpenWRT
4. (optional) dd sysupgrade image to /dev/mmcblk0 to install to eMMC

Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
2024-03-02 14:21:20 +01:00