Commit Graph

1331 Commits

Author SHA1 Message Date
Koen Vandeputte
120e2d91dc kernel: package mhi bus driver
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2022-04-05 17:31:04 +02:00
Daniel Golle
82f9ad6ab2
kernel: load device-mapper early on boot
Previously commit openwrt/packages@3abb7cb ("lvm2: Added script and updated Makefile[...]")
couldn't actually work and allow rootfs_data to be stored on a LVM2 as
the necessary kernel modules had not been loaded at this point.
Fix this by loading device-mapper modules early at boot.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-03 16:25:05 +01:00
Piotr Dymacz
173198e35a kernel: modules: drop 'AddDepends/bluetooth' calls
Function 'AddDepends/bluetooth' doesn't exist in our codebase.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2022-04-01 14:32:54 +02:00
Vincent Pelletier
15fbb91666 kernel: scale nf_conntrack_max more reasonably
Use the kernel's built-in formula for computing this value.
The value applied by OpenWRT's sysctl configuration file does not scale
with the available memory, under-using hardware capabilities.
Also, that formula also influences net.netfilter.nf_conntrack_buckets,
which should improve conntrack performance in average (fewer connections
per hashtable bucket).

Backport upstream commit for its effect on the number of connections per
hashtable bucket.

Apply a hack patch to set the RAM size divisor to a more reasonable value (2048,
down from 16384) for our use case, a typical router handling several thousands
of connections.

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2022-04-01 13:23:41 +01:00
Petr Štetiar
f389831db6 kernel: modules: fix kmod-drm-imx-ldb dependency for 5.15
Fixes following issue:

 Package kmod-drm-imx-ldb is missing dependencies for the following libraries:
 drm_dp_aux_bus.ko

Introduced upstream in commit aeb33699fc2c ("drm: Introduce the DP AUX
bus") in kernel version 5.15.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-31 17:30:17 +02:00
Petr Štetiar
f5a54716a4 kernel: modules: fix kmod-drm dependency for 5.15
Fixes following issue:

 Package kmod-drm is missing dependencies for the following libraries:
 fb.ko

Introduced upstream in commit f611b1e7624c ("drm: Avoid circular
dependencies for CONFIG_FB") in 5.14.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-30 23:39:08 +02:00
Petr Štetiar
be9a69caa8 kernel: modules: fix kmod-mdio-devres dependency for 5.15
Fixes following build issues:

 Package kmod-r8169 is missing dependencies for the following libraries:
 mdio_devres.ko

 Package kmod-ixgbe is missing dependencies for the following libraries:
 mdio_devres.ko

 Package kmod-amd-xgbe is missing dependencies for the following libraries:
 mdio_devres.ko

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
John Thomson
f65596e8a9 kernel: 5.15: fix mediatek usb module change
The mediatek USB kernel module xhci-mtk was restructed.
The module after kernel 5.13 is named xhci-mtk-hcd.
Link:
https://lore.kernel.org/all/0b62e21ddfacc1c2874726dd27ccab80c993f303.1615170625.git.chunfeng.yun@mediatek.com/
Linux 14295a150050 ("usb: xhci-mtk: support to build xhci-mtk-hcd.ko")

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
2022-03-28 11:03:13 +02:00
Felix Fietkau
3f8ea009d0 kernel: add missing nls dependency for kmod-fs-ntfs3
This showed up on a linux 5.15 build

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-28 11:03:13 +02:00
Daniel Golle
f667277dd0
kernel: 5.15: add missing Kconfig symbols for NFS
Add new Kconfig symbols for NFSv4.1 and NFSv4.2 to kmod-nfs-common and
kmod-nfsd.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-27 14:50:59 +01:00
Ansuel Smith
bd0db6017b kernel: 5.15: add new module
Add new module require in 5.15
- Changes in block module
- Changes in netfilter module (log module unified)
- Changes in fs module (mainly new depends for cifs and new ntfs3 module)
- Changes in lib add shared lib now used by more than 1 kmod
- Changes in crypto, dropped one crypto algo added arm crypto accellerator
- Changes in other, add zram default compressor choice and missing lib
  by tpm module

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 02:17:24 +01:00
Brian Norris
e5b009e532 kernel: Package GOOGLE_FIRMWARE drivers
Useful for some Chromium OS based systems, like Google WiFi.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2022-03-25 18:14:13 +01:00
Rui Salvaterra
aaa0c09785 kmod-lzo: include the lzo-rle kmod in the package
Albeit a separate crypto module, lzo-rle uses the same kernel library as lzo.
Crypto API users (zram, for example) expect both lzo and lzo-rle to be
available, so let's include lzo-rle (about 5.5 kiB) in the lib-lzo package.

Based on e9hack's original patch: https://patchwork.ozlabs.org/project/openwrt/patch/541cbfbd-76f2-59b3-a867-47b6f0fc7da9@gmail.com/

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2022-03-22 09:23:44 +00:00
Tianling Shen
efc8aff62c kernel/modules: add kmod-inet-diag package
Add option to compile kmod-inet-diag, support for INET (TCP, DCCP, etc)
socket monitoring interface used by native Linux tools such as ss.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-03-13 19:24:13 +01:00
Catalin Toda
02e42f0650 kernel: kmod-tcp-scalable: add scalable tcp congestion algorithm
Signed-off-by: Catalin Toda <catalinii@gmail.com>
2022-03-01 21:25:47 +01:00
Yousong Zhou
43276b60c6 netfilter: add kmod-nft-tproxy
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2022-02-28 10:24:17 +08:00
Yousong Zhou
0225df1ec8 netfilter: add kmod-nft-socket
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2022-02-28 10:24:17 +08:00
Yousong Zhou
4f443c885d netfilter: separate packages for kmod-ipt-socket and kmod-ipt-tproxy
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2022-02-28 10:24:17 +08:00
Hannu Nyman
97158fe10e kernel: package ramoops pstore-ram crash log storage
Package the ability to log kernel crashes to 'ramoops' pstore
files into RAM in /sys/fs/pstore

Reference to the ramoops admin guide in upstream Linux:
https://www.kernel.org/doc/html/v5.10/admin-guide/ramoops.html

The files in RAM survive a warm reboot, but not a cold reboot.

Note: kmod-ramoops selects kmod-pstore and kmod-reed-solomon.

The feature can be used by selecting the kmod-ramoops and
adding a ramoops reserved-memory definition to the device DTS.
Example from R7800:

       reserved-memory {
                rsvd@5fe00000 {
                        reg = <0x5fe00000 0x200000>;
                        reusable;
                };

                ramoops@42100000 {
                        compatible = "ramoops";
                        reg = <0x42100000 0x40000>;
                        record-size = <0x4000>;
                        console-size = <0x4000>;
                        ftrace-size = <0x4000>;
                        pmsg-size = <0x4000>;
                };
        };

If no definition has been made in DTS, no crash log is stored
for the device.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(added CONFIG_EFI_VARS_PSTORE disable)
2022-02-24 20:45:12 +01:00
Christian Lamparter
2aa97ecb59 kernel: add kmod-hwmon-lm70 support
package hwmon's lm70.ko. This module supports the
National Semiconductor/TI LM70,LM71,LM74 and
TI TMP121,TMP122,TMP123 and TMP124 chips (all SPI).

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-19 19:34:18 +01:00
Rosen Penev
666d427652 linux/modules: split up oid_registry
This will be needed by ksmbd in a following commit.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-02-19 18:29:42 +01:00
Mauri Sandberg
2f50d65161 kernel: add package kmod-gpio-cascade
Adds kernel module for Generic GPIO cascade.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [missing commit description]
2022-02-19 13:10:01 +01:00
Mauri Sandberg
15f0074beb kernel: add package kmod-multiplexer
Adds new kernel module for GPIO controlled multiplexer support.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [missing commit description]
2022-02-19 13:10:01 +01:00
Christian Lamparter
fcd5fd49c5 kernel: usb: remove left-over LINUX_5_10 dependency symbol
this should have been removed together with linux 5.4 APM821XX
support. Currently, this didn't hurt or broke something. But it
will in the next stable kernel release.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-04 21:13:15 +01:00
Etienne Champetier
1ebb8e3b6b netfilter: add kmod-nft-compat
This modules is required by iptables-nft

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-02-02 23:24:03 +01:00
Marek Behún
45d541bb40 kernel: add kmod-vrf
Add option to compile kmod-vrf, support for Virtual Routing and
Forwarding (Lite).

This module depends on NET_L3_MASTER_DEV, which is a boolean kernel
option, so we need to create a configuration option also for this, and
make kmod-vrf depend on it.

Signed-off-by: Marek Behún <kabel@kernel.org>
2022-02-01 22:59:09 +01:00
Hauke Mehrtens
6cab21bd6d kernel: Make kmod-usb-net-lan78xx depend on kmod-of-mdio
kmod-usb-net-lan78xx depends on kmod-of-mdio when this package is
activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-02-01 21:25:02 +01:00
Tiago Gaspar
ef4c97576b netfilter: correct some dependencies
nf-nathelper-extra and nf-conntrack-netlink had iptables related
dependencies, yet, when looking for the respective kernel symbols and
checking it's dependencies it was confirmed that iptables wasn't
required and that these were either it's own moodule or tool independent
(nftables or iptables).

Correct these and make sure no unneeded extras are pulled in.

Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
2022-01-27 09:56:40 +01:00
Christian Lamparter
0a08d4faad kernel: add missing kmod+regmap-i2c dependency for NCT7802Y module
x86, mt7623 and others buildbot failed due to:
|Package kmod-hwmon-nct7802 is missing dependencies for the following libraries:
|regmap-core.ko
|regmap-i2c.ko

Fixes: 1ed50b92d1 ("package: kernel: add driver module for NCT7802Y")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-15 19:55:14 +01:00
Pawel Dembicki
9149ed4f05 mvebu: cortexa9: Add support for Ctera C200-V2
2-Bay NAS - maximum two 3.5" Harddisks

Hardware:
  - SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC)
  - Ram: 1GB (2x Nanya NT5CC512M8DN-D1)
  - NAND Flash: 256MB (ESMT F59L2G81A-25T)
  - Lan: 1x GBE (Marvell 88E1318-NNB2)
  - Storage: 2x SATA HDD 3.5" Slot
  - USB: 2x USB 3.0 port (Renesas uPD720202)
  - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
  - LEDs: 13x GPIO controlled
  - Buttons: 2x GPIO controlled

Known issues:
  - Buzzer is unused due lack of proper driver
  - USB1/2 usbport ledtrigger won't work (through DT)
  - Renesas uPD720202 requires firmware file. It's possible to find
    non-free binary. Please look for 'UPDATE.mem' file and put in into
    '/lib/firmware/renesas_usb_fw.mem' file.

Installation:
  - Apply factory initramfs image via stock web-gui.
  - Do sysupgrade to make installation complete.

Back to stock:
  - OpenWrt rootfs partition use unused space after stock firmware.
  - Full revert is possible.
  - Login via ssh and run:

 ## ctera_c200-v2_back_to_factory start ##
 . /lib/functions.sh
 part=$(find_mtd_part "active_bank")
 active_bank=$(strings "$part" | grep bank)
 if [ "$active_bank" = "bank1" ]; then
 	echo "bank2" > /tmp/change_bank
 else
 	echo "bank1" > /tmp/change_bank
 fi
 mtd write /tmp/change_bank active_bank
 reboot
 ## ctera_c200-v2_back_to_factory end ##

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(put back-to-stock script into commit message, removed dup. SUBPAGESIZE var,
added 01_leds for non-working dt-usb-port trigger)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-15 17:41:19 +01:00
Pawel Dembicki
1ed50b92d1 package: kernel: add driver module for NCT7802Y
This commit add package with hwmon-nct7802 module.

This driver implements support for the Nuvoton NCT7802Y hardware monitoring
chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan
speed sensors.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(fixed c&p'ed module description)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-15 17:41:19 +01:00
Josef Schlehofer
31647d8be8 kernel: add kmod-usb-net-lan78xx
Add kernel module for Microchip LAN78XX based USB 2 & USB 3
10/100/1000 Ethernet adapters. [1]

This kernel module is required for the Seeed Studio's Mini Router
based on RPI CM4 [2].

[1] <https://cateee.net/lkddb/web-lkddb/USB_LAN78XX.html>
[2] <https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html>

Link: <https://github.com/openwrt/openwrt/pull/4893>
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(added kmod-phy-microchip and kmod-fixed-phy dependencies,
rpi3 needs lan78xx but has it built-in)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-08 23:23:22 +01:00
Christian Lamparter
3fabca8894 kernel: provide kmod-fixed-phy as separate kmod
Almost all targets have the fixed-phy feature built into the kernel.
One big exception is x86. This caused a problem with the upcoming
LAN78xx usb driver. Hence this patch breaks out the fixed-phy from
of_mdio (which didn't include the .ko) and puts into a separate
module.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-08 23:20:21 +01:00
Christian Lamparter
d9ff9a4270 kernel: add kmod-phy-microchip
phy drivers for Microchip's LAN88xx PHYs.
This is needed for the "LAN7801" variant
of the upstream lan78xx usb ethernet driver.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-08 23:17:18 +01:00
Marty Jones
3fe253c6ab linux-firmware: add new package r8152-firmware
Linux upstream commit 9370f2d05a
add load firmware file through request_firmware,this affect the
nanopi r2s and some USB adapters in kernel 5.10 with this error:
'r8152 4-1:1.0: unable to load firmware patch rtl_nic/rtl8153b-2.fw'
This patch split the USB NIC firmware files from r8169 firmware,
and adds r8152-firmware to r8152 driver.
Add kmod-usb-net-cdc-ncm to support RTL8156A and RTL8156B 2.5G ethernet
adapters supported since v5.13-rc1.
195aae321c

Signed-off-by: Marty Jones <mj8263788@gmail.com>
2022-01-08 00:49:59 +01:00
Pawel Dembicki
c6ab514863 packages: kernel: add i2c hwmon g762 kmod package
This patch adds kernel module for Global Mixed-mode Technology Inc
G762 and G763 fan speed PWM controller chips.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2021-12-29 20:35:57 +01:00
Stijn Tintel
080a769b4d qoriq: new target
Add a new target named "qoriq", that will support boards using PowerPC
processors from NXP's QorIQ brand.

This doesn't actually add support for any board yet, so that
installation instructions can go in the commit message of the commit
that adds actual support for a board.

Using CONFIG_E6500_CPU here due to the kernel using -mcpu=powerpc64
rather than -mcpu=e5500 when selecting CONFIG_E5500_CPU. The only
difference between e5500 and e6500 is AltiVec support, and the kernel
checks for it at runtime. Musl will only check at runtime if AltiVec
support is disabled at compile-time, so we need to use e5500 in CPU_TYPE
to avoid SIGILL.

Math emulation (CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED) is required, as
neither e5500 nor e6500 implement fsqrt nor fsqrts, and musl hardcodes
sqrt and sqrtf to use these ASM instructions on PowerPC64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-12-21 21:37:39 +02:00
Stijn Tintel
7e54e9f860 kernel: drop obsolete kmod-video-core dependencies
These dependencies do not exist in any of the supported kernel versions.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-12-20 19:57:01 +02:00
Stijn Tintel
a47c82b556 kernel: drop obsolete symbols from kmod-video-core
These symbols don't exist in any of the supported kernel versions.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-12-20 19:57:01 +02:00
Josef Schlehofer
362695acdf kernel: add kmod-video-gspca-sq930x
This module adds support for USB WebCams, which uses SQ930X chip [1].

[1] https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SQ930X.html

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2021-12-05 18:49:14 +01:00
Josef Schlehofer
fcb82e42df kernel: btrfs: enable ACL
By default CONFIG_BTRFS_FS_POSIX_ACL is disabled, it should be enabled
only when you enable CONFIG_FS_POSIX_ACL.

Right now, when you enable CONFIG_FS_POSIX_ACL it will enable
CONFIG_BTRFS_FS_POSIX_ACL, but it will be disabled once you install
kmod-btrfs. This should prevent it.

Btrfs has enabled by default ACL for mount option.

More details:
https://cateee.net/lkddb/web-lkddb/BTRFS_FS_POSIX_ACL.html
https://btrfs.wiki.kernel.org/index.php/Manpage/btrfs(5)

Signed-off-by: Josef Schlehofer <josef.schlehofer@nic.cz>
2021-12-05 18:49:14 +01:00
Matthew Hagan
529eac5371 kernel: add back kmod-leds-tlc591xx
Add back support for the TLC591xx series LEDs which are used in the
ipq806x-based Meraki Cryptid series devices.

This module previously existed for the mvebu platform but was removed
at commit f849c2c832 due to being enabled
in that platform's kernel config.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
2021-11-28 17:41:18 +01:00
Marius Durbaca
f1b4c1d82d kernel: add kmod-usb-net-smsc75xx
add kernel module for smsc75xx based USB 2.0 Gigabit Ethernet devices

Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
2021-11-20 21:08:25 +01:00
Karel Kočí
507911f477 kernel: add kmod-ledtrig-pattern
This allows LEDs to be triggered by custom pattern and not just
predefined ones.

Signed-off-by: Karel Kočí <karel.koci@nic.cz>
2021-11-20 18:53:14 +01:00
Hauke Mehrtens
13bd0721d1 kernel: Add regmap-i2c dependency to sound-soc-imx-sgtl5000
This dependency is needed on the imx/cortexa7 subtarget.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-11-07 17:08:51 +01:00
Piotr Dymacz
b769bf553d kernel: update dependencies after 'imx6' -> 'imx' rename
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2021-11-03 12:45:40 +01:00
Florian Eckert
b69dfb0a99 kernel/modules: prevent bonding driver to create default bond0 interface
When loading the bonding driver, bonding interface are automatically
created on bonding module load.

> ip a s bond0
> 14: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
> group default qlen 1000
>    link/ether a6:f2:20:64:c1:b9 brd ff:ff:ff:ff:ff:ff

This is not necessary in openwrt as we do not use this created interface.
The netifd creates a bonding interface based on its network configuration
name and configures this over the netifd bonding proto handler.

In order to keep the overview of the interfaces clear, bonding
interfaces should not be created automatically when loading this module,
because they are not used anyway.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2021-11-01 00:56:51 +01:00
Stijn Tintel
b4a3c20aa4 kernel: drop kmod-gpio-dev
The GPIO_DEVICE symbol belonged to a custom driver that was removed from
OpenWrt in 2012. The symbol never existed in the upstream kernel.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-10-05 23:30:48 +03:00
Stijn Tintel
0e30276632 kernel: add missing symbol to kmod-kvm
Even though TRACEPOINTS is not enabled in my kernel config, my build
fails due to KVM_MMU_AUDIT being missing. Add this symbol to kmod-kvm to
fix this.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-09-29 19:17:55 +03:00
Stijn Tintel
73a2570fa0 kernel: order kmod-kvm symbols alphabetically
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-09-29 19:17:55 +03:00
Christian Pointner
bd74bc9013 kernel: add package kmod-iio-ads1015 and remove kmod-hwmon-ads1015
The hwmon driver for the ADC ADS1015 has been removed in Linux 5.4 in
favor of a driver in the iio system. For details see:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2c9d5b5e

This fixes: https://bugs.openwrt.org/index.php?do=details&task_id=4005

Run-tested: ramips/mt76x8 (Onion Omega 2+)

Signed-off-by: Christian Pointner <equinox@spreadspace.org>
2021-09-13 17:11:50 +02:00
Stijn Tintel
986685f4f0 kernel: kmod-xfrm-interface requires IPv6
The xfrm_interface module will not be built if IPv6 is not enabled in
the kernel. Add this dependency in the kmod package to avoid people
wondering why it doesn't build when they disabled IPv6.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-08-06 00:21:08 +03:00
Stijn Tintel
3cb22b277a kernel: add missing symbol to kmod-qlcnic
When the kmod-qlcnic package is built on targets that have
CONFIG_PCI_IOV enabled, the CONFIG_QLCNIC_SRIOV symbol is exposed.
Enable this symbol in the kmod package to fix its build.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-07-23 12:33:32 +03:00
Aleksander Jan Bajkowski
c1927f4108 kernel: crypto: limit crypto-hw-hifn-795x to devices with pci support
CONFIG_CRYPTO_DEV_HIFN_795X depends on PCI. This driver only makes sense on
devices with pci support.

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2021-06-22 23:23:00 +02:00
Chris Blake
f1e41155c9 kernel/modules: make sure igb loads at boot
Without loading the igb at boot, the recovery wouldn't have
network available. All network drivers should be loaded before
etc/board.d/02_network is called. Note that other network drivers
already have this set, such as tg3.

Fixes: 7e0e5110bc ("kernel: add igb kernel module")
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2021-06-21 08:38:07 -10:00
Tomasz Maciej Nowak
e9c9b5ec72 kernel: package Synopsys Designware PCI to I2C controller
This is present on Roqos Core RC10 and needed to control LED matrix.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2021-06-06 00:26:13 +02:00
Kuan-Yi Li
2fdb7053f9 kernel: usb: add kmod-usb-gadget-ncm
Add kernel module package for USB Network Control Model (NCM) Gadget
support.

Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2021-06-06 00:26:13 +02:00
Evgeny Kolesnikov
3e9318f3c0 kernel: fix AutoLoad parameter for uleds module
The name of the module is 'uleds', not 'leds-uleds'.

Signed-off-by: Evgeny Kolesnikov <evgenyz@gmail.com>
[improve commit title]
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-05-26 23:10:54 +02:00
Aleksander Jan Bajkowski
08664f9bf3 kernel: limit crypto-hw-talitos to the mpc85xx and layerscape
CONFIG_CRYPTO_DEV_TALITOS depends on FSL_SOC. This driver only makes sense
on Freescale(NXP) SoCs.

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2021-05-23 15:11:38 +02:00
Aleksander Jan Bajkowski
8f80b9b8f6 kernel: limit crypto-hw-geode to the x86/geode
CONFIG_CRYPTO_DEV_GEODE depends on X86_32. This driver only makes sense
on X86\geode.

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2021-05-23 15:11:38 +02:00
Aleksander Jan Bajkowski
577ba5a3a9 kernel: crypto: drop kmod-crypto-pcompress
CONFIG_CRYPTO_PCOMP and CONFIG_CRYPTO_PCOMP2 have been removed in upstream commit[1].
This symbol doesn't exist since kernel 4.6 and this package is empty.

1. [ crypto: compress - remove unused pcomp interface ]
(110492183c)

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2021-05-23 15:11:38 +02:00
Aleksander Jan Bajkowski
f298d5b810 kernel: crypto: drop kmod-crypto-wq
CONFIG_CRYPTO_WORKQUEUE was removed in upstream commit[1]. This symbol doesn't
exist since kernel 5.3 and this package is empty.

1. [ crypto: cryptd - move kcrypto_wq into cryptd ]
(3e56e16863)

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2021-05-23 15:11:38 +02:00
Anderson McKinley
0eca9699b1 kernel: add kmod-input-leds
Adds support for LEDs on input devices. Useful for example on x86 laptops-
allows re-purposing num/caps/scroll lock LEDs.

Signed-off-by: Anderson McKinley <coyoso@tuta.io>
2021-05-23 15:10:30 +02:00
Leonardo Mörlein
b993b68b6c build: introduce $(MKHASH)
Before this commit, it was assumed that mkhash is in the PATH. While
this was fine for the normal build workflow, this led to some issues if

    make TOPDIR="$(pwd)" -C "$pkgdir" compile

was called manually. In most of the cases, I just saw warnings like this:

    make: Entering directory '/home/.../package/gluon-status-page'
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    bash: line 1: mkhash: command not found
    [...]

While these were only warnings and the package still compiled sucessfully,
I also observed that some package even fail to build because of this.

After applying this commit, the variable $(MKHASH) is introduced. This
variable points to $(STAGING_DIR_HOST)/bin/mkhash, which is always the
correct path.

Signed-off-by: Leonardo Mörlein <me@irrelefant.net>
2021-05-13 15:13:15 +02:00
Keith T. Garner
6a37286c2a kernel: add kmod-leds-uleds
The allows userspace LEDs to be created and controlled. This can be useful
for testing triggers and can also be used to implement virtual LEDs.

Signed-off-by: Keith T. Garner <kgarner@kgarner.com>
[squash fixup commit and improve option wording]
Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-05-12 10:47:23 +02:00
Chukun Pan
5e926c26d4 kernel: qlcnic: fix typo in module description
Fixes: f88c64d28c ("kernel: netdev: add qlcnic")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2021-05-01 21:48:57 +02:00
Hauke Mehrtens
95b210e513 kernel: qlcnic: add dependency to kmod-hwmon-core
QLCNIC_HWMON was activated when hwmon was set, but the dependency was
missing. This broke the build bot builds. Fix this by explicitly
activating HWMON support and adding a dependency.

Fixes: f88c64d28c ("kernel: netdev: add qlcnic")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-05-01 12:00:41 +02:00
Vieno Hakkerinen
f88c64d28c kernel: netdev: add qlcnic
Add driver for QLogic QLE8240 and QLE8242 Converged Ethernet devices.

Signed-off-by: Vieno Hakkerinen <vieno@hakkerinen.eu>
2021-05-01 00:37:09 +02:00
Chen Minqiang
e219b7f38b kernel: add kmod-ipvlan support
This kmod is similar to macvlan with the difference being that the
endpoints have the same mac address.

It is useful on cloud where only one mac address allowed on port,
where macvlan not works but ipvlan would.

One use case is where multiple IPs and gateways assign on one net port

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2021-04-30 23:51:23 +02:00
David Bauer
4978e073cd kernel: select kmod-backlight as dependency for kmod-drm
Select kmod-backlight as dependency for kmod-drm in case kmod-backlight
is compiled.

This fixes kernel 5.10 build issues on x86-geode with all kmods
enabled:

Package kmod-drm is missing dependencies for the following libraries:
backlight.ko

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-04-18 14:41:02 +02:00
David Bauer
7cea19c2ce kernel: netdev: make kmod-of-mdio conflict with x86
CONFIG_MDIO_OF depends on CONFIG_OF which is not enabled for x86.

Fixes builds of x86 with Kernel 5.10 due to unresolved dependencies.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-04-18 14:40:55 +02:00
DENG Qingfang
10aacb9a6c kernel/modules: move act_gact into kmod-sched-core
As the name suggests, act_gact has the generic actions such as dropping
and accepting packets, so move it into kmod-sched-core.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
2021-04-17 21:56:05 +02:00
Rafał Miłecki
cb3fb45ed1 kernel: limit crypto-hw-ccp to the x86
CRYPTO_DEV_CCP depends on X86 or ARM64
CRYPTO_DEV_CCP_DD depends on CPU_SUP_AMD or ARM64

Compiling this driver makes sense for x86 mainly. If one day support for
ARM64 board with AMD Secure Processor gets added this package may be
updated.

Trying to build this package on bcm4908 was causing:
ERROR: module 'build_dir/target-aarch64_cortex-a53_musl/linux-bcm4908_generic/linux-5.4.110/drivers/crypto/ccp/ccp-crypto.ko' is missing.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-13 17:20:55 +02:00
Rafał Miłecki
107111adbb kernel: crypto: format "crypto-hw-ccp" dependencies
Use multiples lines for better readability and sort lines.

Suggested-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-13 17:19:09 +02:00
Hauke Mehrtens
dc61c32fdc kernel: Adapt renamed can-dev.ko
The can-dev.ko kernel module was moved in kernel 5.4.110 and 5.10.28.

Fixes: a1311df95587 ("kernel: bump 5.10 to 5.10.28")
Fixes: b0a34e886d ("kernel: bump 5.4 to 5.4.110")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-04-11 00:02:05 +02:00
Tony Ambardar
2ba0ab1930 kernel: robustify dependencies in kmod-sound-hda-core
Dependency tracking for kmod-sound-hda-core is fragile. Enabling some sound
codecs (Realtek, Conexant, Sigmatel) implicitly adds a kmod-ledtrig-audio
dependency, while an enabled kmod-ledtrig-audio can be picked up through
enabling others (e.g. kmod-sound-hda-intel), and the behaviour can change
across kernel versions.

As kmod-ledtrig-audio is under 2KB, make it an unconditional dependency.

Fixes: a374b8f190 ("kernel: 5.10: update sound modules")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-20 23:57:58 -10:00
Rosen Penev
a50441b6e9 kernel: add exfat again
With kernel 5.10, exfat is out of staging and in tree.

Added small hack to make it work with kernel 5.4 as well.

Added removed config options for 5.4 to generic config.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[Set CONFIG_EXFAT_ config options to default values]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-19 16:08:12 +01:00
Tony Ambardar
863ce4f15f kernel/modules: relocate teql hotplug from iproute2 to kmod-sched
The link equalizer sch_teql.ko of package kmod-sched relies on a hotplug
script historically included in iproute2's tc package. In previous
discussion [1], consensus was the hotplug script is best located together
with the module in kmod-sched, but this change was deferred at the time.

Relocate the hotplug script now. This change also simplifies adding a tc
variant for minimal size with reduced functionality.

[1] https://github.com/openwrt/openwrt/pull/1627#issuecomment-447923636

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 15:30:01 +01:00
Tony Ambardar
a374b8f190 kernel: 5.10: update sound modules
Update file paths for kmod-sound-hda-intel and reflect new dependency of
kmod-sound-hda-core on kmod-ledtrig-audio.

Reported-by: Javier Marcet <javier@marcet.info>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 14:02:47 +00:00
Tony Ambardar
ad11fc8c23 kernel: add kmod-ledtrig-audio
This allows LEDs to be controlled by audio drivers.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 14:02:47 +00:00
Tony Ambardar
66fd9acf50 kernel: 5.10: add missing dependency in kmod-mdio-devres
Add conditional dependency on kmod-of-mdio due to mdio_devres.c code:
  #if IS_ENABLED(CONFIG_OF_MDIO)
  ...
  EXPORT_SYMBOL(devm_of_mdiobus_register);
  #endif /* CONFIG_OF_MDIO */

Fixes: 95a3741d17 ("kernel: support new mdio_devres.ko module in 5.10")
Reported-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 14:02:47 +00:00
Tony Ambardar
2a8ae3bf0a kernel: 5.10: update kmod-usb-net-smsc95xx
Add kmod-libphy dependency.

Signed-off-by: Javier Marcet <javier@marcet.info>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 14:02:47 +00:00
Tony Ambardar
95a3741d17 kernel: support new mdio_devres.ko module in 5.10
Add kmod-mdio-devres package and kernel config symbol, and update related
kmod-r8169 and kmod-ixgbe package dependencies.

Build tested module dependencies on x86/64 with CONFIG_ALL_KMODS=y.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-14 17:52:49 +00:00
Adrian Schmutzler
9397b22df1 treewide: make AddDepends/usb-serial selective
Make packages depending on usb-serial selective, so we do not have
to add kmod-usb-serial manually for every device.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-06 12:38:38 +01:00
Daniel Golle
20b6e014a6 kernel: fix kmod-usb3 on platforms without PCI
Partially restore the wild-card matching for kmod-usb3 modules to fix
build on platforms without PCI which otherwise file, as seen on
buildbot:

ERROR: module '[...]/linux-5.4.102/drivers/usb/host/xhci-pci.ko' is missing.
modules/usb.mk:1675: recipe for target '[...]/kmod-usb3_5.4.102-1_mips_mips32.ipk' failed

Fixes: 7bda2e9aba ("kernel: fix kmod-usb3 dependencies")
Fixes: be23f9818a ("apm821xx: add support for kernel 5.10")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-06 04:42:00 +00:00
Ilya Lipnitskiy
7bda2e9aba kernel: fix kmod-usb3 dependencies
Adding CONFIG_USB_XHCI_PCI_RENESAS to KCONFIG made it so it was set
for all targets that included kmod-usb3, not just the intended
apm821xx/nand. xhci-pci has a dependency on xhci-pci-renesas if
CONFIG_USB_XHCI_PCI_RENESAS is set, breaking kmod-usb3 builds on
Linux 5.10 on all other targets.

Rework the dependencies by breaking out xhci-hcd, xhci-mtk, and
xhci-pci-renesas into new hidden kernel modules and setting kmod-usb3
dependencies properly.

Tested by building mt7621 and apm821xx/nand with kmod-usb3 on Linux 5.10

Fixes: be23f981 ("apm821xx: add support for kernel 5.10")
Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
2021-03-06 02:47:11 +00:00
Christian Lamparter
be23f9818a apm821xx: add support for kernel 5.10 for testing
This patch copies over refreshed patches from 5.4.

 - dropped crypto patches (they got upstreamed)

 - dropped renesas USB 3 firmware loader (they got upstreamed)

 - NAND now needs extra device-properties for ECC settings.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-03-05 22:47:14 +01:00
Rui Salvaterra
9a20c844f4 kernel/modules: fix CDC NCM dependencies
CDC NCM support only depends on CDC Ethernet with Linux 5.10. Fix thusly.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-03-05 14:41:14 +01:00
Rui Salvaterra
d0d5fcada9 kernel/zram: remove obsolete symbol
Zsmalloc page table mappings are dead and gone [1]. Drop the respective kconfig
symbol.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.4.y&id=69dc72f058c9b98f9b66bed184cfab7c2e9f49b0

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-03-01 00:34:23 +01:00
Ilya Lipnitskiy
464451d9ab kernel: no chacha-mips.ko on mips32 r1 targets
CHACHA_MIPS depends on CPU_MIPS32_R2. Therefore,
kmod-crypto-lib-chacha20 should not contain chacha-mips.ko on MIPS32 R1
targets. Enforce that in the target-specific definition.

Fixes bcm47xx, bcm63xx, lantiq/ase, ath25 builds.

Fixes: 06351f1 ("kernel: migrate wireguard into the kernel tree")
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
2021-02-27 10:14:23 +01:00
Ilya Lipnitskiy
0b53d6f7fa kernel: fix kmod-wireguard package fields
Use NETWORK_SUPPORT_MENU like all other modules in netsupport.mk. Drop
SECTION and CATEGORY fields as they are set by default and to match
other packages in netsupport.mk. Use better TITLE for kmod-wireguard
(taken from upstream drivers/net/Kconfig).

Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
2021-02-26 20:41:01 +01:00
Ilya Lipnitskiy
06351f1bd0 kernel: migrate wireguard into the kernel tree
On Linux 5.4, build WireGuard from backports. Linux 5.10 contains
wireguard in-tree.

Add in-kernel crypto libraries required by WireGuard along with
arch-specific optimizations.

Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
2021-02-26 20:41:01 +01:00
Ilya Lipnitskiy
30b482551d kernel: 5.10: fix kmod build failures
Modify existing modules to reflect their new location in Linux 5.10. Add
missing dependenices.

Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
[enable CRYPTO_USER_API_ENABLE_OBSOLETE; add kmod-crypto-hash dependency
to usb-net-rtl8152]
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-23 20:13:22 +01:00
Andreas Eberlein
a3e6521c1a x86: add led driver for PC Engines APU1
This driver adds the LED support for the PC Engines APU1.
This integrates the Linux kernel driver and includes a patch to support
 newer firmware versions. Also the default LED configuration is updated
 to use the correct devices.

Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de>
2021-02-20 00:29:18 -10:00
Felix Fietkau
b10d604459 kernel: add linux 5.10 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-02-16 20:06:51 +01:00
Sungbo Eo
583e39e3d5 kernel: drop empty kmod-ledtrig-* packages
The following four led triggers are enabled in generic config.

* kmod-ledtrig-default-on
* kmod-ledtrig-heartbeat
* kmod-ledtrig-netdev
* kmod-ledtrig-timer

Drop the packages and remove them from DEVICE_PACKAGES.
There's no other package depending on them in this repo.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2021-01-15 18:24:31 +01:00
Sungbo Eo
218eff5bdb kernel: update kmod-thermal package
CONFIG_THERMAL option was changed to boolean in upstream linux commit
554b3529fe01 ("thermal/drivers/core: Remove the module Kconfig's option").
Switch it to 'y' and remove FILES and AUTOLOAD for non-existant module file.

And update the descripton text for the package as in upstream linux commit
eb8504620381 ("thermal: Rephrase the Kconfig text for thermal").

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2021-01-15 17:47:33 +01:00
Etan Kissling
39add246c1 nf-conntrack: allow querying conntrack info in nfqueue
This allows libnetfilter_queue to access connection tracking information
by requesting NFQA_CFG_F_CONNTRACK. Connection tracking information is
provided in the NFQA_CT attribute.
CONFIG_NETFILTER_NETLINK_GLUE_CT enables the interaction between
nf_queue and nf_conntrack_netlink. Without this option, trying to access
connection tracking information results in "Operation not supported".

Signed-off-by: Etan Kissling <etan_kissling@apple.com>
2021-01-14 00:52:49 +00:00
Pawel Dembicki
9919a1e7ea kernel: add hid-cp2112 driver support
This patch adds kernel module for Silicon Labs CP2112 HID USB to SMBus
Master Bridge. This is a HID device driver which registers as an i2c
adapter and gpiochip to expose these functions of the CP2112.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2021-01-07 22:30:34 -10:00
Rui Salvaterra
0f14aec8fc kernel/modules: remove fake users from udptunnel{4,6}
Since we're now able to select CONFIG_NET_UDP_TUNNEL at will, drop the fake
dependencies.

This is a partial revert of commit d7e040f8bc
"kernel: add fake users for udptunnel and iptunnel modules".

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-01-01 19:56:00 +01:00
Yousong Zhou
1508841b4e kmod-tcp-hybla: new module for hybla congestion control algorithm
Just the module and no default sysctl conf file is provided

Link: https://forum.openwrt.org/t/20-xx-tcp-hybla/83076
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-12-26 10:08:08 +08:00
Yousong Zhou
d45b50389d kmod-tcp-bbr: use AutoProbe
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-12-26 10:08:08 +08:00
Yousong Zhou
72447181bc kmod-tcp-bbr: leave CONFIG_TCP_CONG_ADVANCED to target config
Since generic has the option set to y and other targets now inherit that
choice, there is no behaviour change

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-12-26 10:08:08 +08:00
Rosen Penev
57ad2a9421 fs/cifs: update module dependencies
0fdfef9aa7ee68ddd508aef7c98630cfc054f8d6 upstream removed CIFS_SMB311.
Kernels 4.19 and above do not have it. Currently only kernels 4.19 and
5.4 are in the tree.

The Kconfig file in the kernel has more selection that what is in here.
Add the rest and reorder based on upstream ordering.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-12-22 18:59:10 +01:00
Daniel Golle
c74ae89574 kernel: package kmod-keys-encrypted and kmod-keys-trusted
Add kernel module packages for handling encrypted and TPM trusted
keys on the kernel chain.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-12-14 17:25:14 +00:00
Marty Jones
b63e57ba17 kernel: add Aquantia AQtion USB-to-5GbE adapters
This add support for USB-to-Ethernet Aquantia AQtion
5/2.5GbE adapters based on the AQC111U controllers.

Run-tested: x86
Adapter-tested: Sabrent NT-SS5G
Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-12-11 13:57:04 +01:00
Rui Salvaterra
e273c1715b kernel: kmod-lib-zstd: enable crypto API support
Zstd is supported by the crypto API since Linux 4.18. Enable this feature and
reveal the package in the configuration section, so the user can select it.
This allows zstd to be used as a compression algorithm in zram, for example.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2020-12-06 08:56:59 -10:00
Petr Štetiar
e5ba6e9c28 kernel: sfc,sfc-falcon: fix kernel config symbols
I've just noticed on i.mx6 target, that there are missing kernel symbols
so I'm fixing it.

Fixes: 3c5d70ad26 ("kernel: add module support Solarflare network adapter")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-27 14:46:13 +01:00
Pawel Dembicki
a1158b3170 kernel: iio: add fxas21002c driver support
This patch adds kernel modules for Freescale FXAS21002C 3-axis gyro driver.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-11-23 22:53:15 +01:00
DENG Qingfang
03d178727a kernel: remove mvsw61xx swconfig driver
All targets that used mvsw61xx have switched to upstream mv88e6xxx DSA
driver, so it can be removed.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-11-16 13:55:05 +01:00
Felix Fietkau
bc91ce3a70 kernel: remove kmod-capi
We don't package any driver that uses this module

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-13 13:16:25 +01:00
Tan Zien
3c5d70ad26 kernel: add module support Solarflare network adapter
According to Solarflare user guide
it is recommended to install lm-sensors and
use the following command to obtain adapter health info

$ sensors | grep sfc
sfc pci 0400
sfc pci 0401

$ sensors sfc pci 0400
sfc pci 0400
Adapter: PCI adapter
1.2V supply:                        N/A
3.3V supply:                    +3.22 V  (min =  +3.00 V, max =  +3.60 V)
12.0V supply:                  +12.14 V  (min = +11.04 V, max = +12.96 V)
0.9V supply (ext. ADC):         +1.03 V  (min =  +0.50 V, max =  +1.10 V)
                                         (crit max =  +1.15 V)
0.9V phase A supply:                N/A
PHY overcurrent:                    N/A
ERROR: Can't get value of subfeature temp1_alarm: Can't read
PHY temp.:                          N/A
AOE FPGA temp.:                 +68.0°C  (low  =  +0.0°C, high = +95.0°C)
                                         (crit = +105.0°C)
Ambient temp.:                  +56.0°C  (low  =  +0.0°C, high = +75.0°C)
                                         (crit = +85.0°C)
Controller die (TDIODE) temp.:  +77.0°C  (low  =  +0.0°C, high = +95.0°C)
                                         (crit = +105.0°C)
Board front temp.:              +59.0°C  (low  =  +0.0°C, high = +75.0°C)
                                         (crit = +85.0°C)
Board back temp.:               +62.0°C  (low  =  +0.0°C, high = +75.0°C)
                                         (crit = +85.0°C)
1.2V supply current:                N/A
0.9V phase A supply current:        N/A
3.3V supply current:                N/A
12V supply current:                 N/A

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
2020-11-12 18:19:44 +01:00
Brett Mastbergen
df8e4906f7 netfilter: Add queue support for nftables
This change adds the configuration option to build and include
the nft_queue kernel module, which allows traffic to be queued up
to userspace from an nftables rule

Tested-by: Sébastien Delafond sdelafond@gmail.com
Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
2020-11-12 18:19:44 +01:00
Adrian Schmutzler
ac5671f46c kernel: remove obsolete kernel version switches for 4.19
This removes switches dependent on kernel version 4.19 as well as
several packages/modules selected only for that version.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-30 19:44:41 +01:00
Daniel Golle
499924adf0 Revert "kmod-nft-reject: Fix for "nft_reject_ipv4.ko missing" warning"
This reverts commit 7f94e2afcf.

Package kmod-nft-core is missing dependencies for the following libraries:
nft_reject.ko

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-30 01:39:01 +00:00
Philip Prindeville
7f94e2afcf kmod-nft-reject: Fix for "nft_reject_ipv4.ko missing" warning
Seeing the following:

    ERROR: module '/home/philipp/lede/build_dir/target-x86_64_musl/linux-x86_64/linux-5.4.33/net/ipv4/netfilter/nft_reject_ipv4.ko' is missing.
    modules/netfilter.mk:1068: recipe for target '/home/philipp/lede/bin/targets/x86/64/packages/kmod-nft-core_5.4.33-1_x86_64.ipk' failed
    make[3]: *** [/home/philipp/lede/bin/targets/x86/64/packages/kmod-nft-core_5.4.33-1_x86_64.ipk] Error 1

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2020-10-30 00:39:09 +00:00
Andre Heider
111895aa19 kernel: add a kmod package for the SoC S/PDIF codec
Size of the modules for a Cortex A7 build:
43920 linux-5.4.66/sound/soc/codecs/snd-soc-spdif-rx.ko
44044 linux-5.4.66/sound/soc/codecs/snd-soc-spdif-tx.ko

Signed-off-by: Andre Heider <a.heider@gmail.com>
2020-10-11 17:45:02 +02:00
Andre Heider
447fe1454e kernel: fix name of CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM
CONFIG_SND_SOC_DMAENGINE_PCM was removed and replaced with
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM seven years ago, see:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=28c4468b00a1e55e08cc20117de968f7c6275441
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b7ae6f31d8243ec684af16bc5c763eccdfabaec0

Signed-off-by: Andre Heider <a.heider@gmail.com>
2020-10-11 17:45:02 +02:00
Hauke Mehrtens
7c0496f29b kernel: Move CONFIG_*_FS_XATTR to generic kernel config
This option is now activated in the generic kernel configuration, no
need to do it for a specific package.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-10-11 16:38:16 +02:00
Hauke Mehrtens
722906d144 kernel: move CONFIG_F2FS_CHECK_FS to generic kernel config
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-10-11 16:38:16 +02:00
Hauke Mehrtens
6542615e41 kernel: Move CONFIG_F2FS_FS_SECURITY to generic kernel config
Move the CONFIG_F2FS_FS_SECURITY kernel configuration option to the
generic kernel configuration.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-10-11 16:38:16 +02:00
Hauke Mehrtens
18deed29be kernel: Remove 2FS_FS_XATTR and F2FS_STAT_FS symbols from target configs
This config option was moved to the generic kernel configuration.

Fixes: ab1bd57656 ("kernel: move F2FS_FS_XATTR and F2FS_STAT_FS symbols to generic")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-10-11 16:38:16 +02:00
Pawel Dembicki
2d72671b6e layerscape: add layerscape's SATA driver package
This patch intruduce SATA support for layerscape devices.
Target specific package with ahci_qoriq driver was added
to local modules.mk.
Kmod package was added to default packages for devices with
SATA interface.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-10-02 17:08:28 +02:00
Christian Lamparter
f6fbc39706 build: define PWM_SUPPORT arch feature flag
As the PWM has its own sub-system in the Linux kernel,
I think it should be handled in the same way as GPIO, RTC, PCI...

This patch introduces a specific feature flag "pwm" and the
"leds-pwm" kernel module as the first customer.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-09-25 19:32:33 +02:00
Aleksander Jan Bajkowski
b0aff40ae3 kernel: drop kmod-bmp085, kmod-bmp085-i2c and kmod-bmp085-spi
CONFIG_BMP085* is replaced by CONFIG_BMP280 since 4.9[1] and this package is empty.
OpenWRT also has kmod-iio-bmp280* package and we can drop old packages.

1. [ misc: retire the old BMP085 driver ]
(832c8232dd (diff-5000d544d790c669405eb2a6775e5981))

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2020-09-18 20:08:51 +02:00
Tan Zien
4742ba41d0 kernel: add module support Intel Ethernet Controller I225 Series
add kernel module igc support Intel Ethernet Controller I225 Series.

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
2020-09-18 20:08:51 +02:00
Bob Cai
f1bc66c765 kernel: improve the description of fs-nfs-v4
TITLE is "NFS4 filesystem client support" (Line 428)
but the description is "Kernel module for NFS v4 support" (Line 438).

Use "Kernel module for NFS v4 client support" on line 438.

Signed-off-by: Bob Cai <1119283622@qq.com>
[commit title/message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-10 18:52:15 +02:00
Adrian Schmutzler
6362a04725 kernel: remove obsolete kernel version switches for 4.14
This removes switches dependent on kernel version 4.14 as well as
several packages/modules selected only for that version.

This also removes sched-cake-virtual, which is not required anymore
now that we have only one variant of cake.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-02 16:29:23 +02:00
Adrian Schmutzler
bc88ee0aff samsung: drop target
This target is still on kernel 4.14, and no attempt has been made to
update it to a newer kernel. Since we already are two LTS versions ahead
of that the target is dropped, as the chance of somebody bumping it will
only decrease with time.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-02 16:29:22 +02:00
Sven Wegener
6a9c76a6c4 leds: add activity led trigger kernel module package
The activity trigger flashes like the heartbeat trigger, but adjusts
based on system load.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
2020-08-30 22:21:34 +02:00
Adrian Schmutzler
4e4ee46495 ar71xx: drop target
This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-30 22:18:35 +02:00
Adrian Schmutzler
cc501ab021 kernel: set WATCHDOG_CORE dependency in kmod-hwmon-sch5627
For many target we have added CONFIG_WATCHDOG_CORE=y to the target
config due to the following error:

 Package kmod-hwmon-sch5627 is missing dependencies for the following
 libraries:
 watchdog.ko

However, actually the proper way appears to be setting the
dependency for the kmod-hwmon-sch5627 package, as the error message
demands.

Do this in this patch and remove the target config entries added
due to this issue.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-24 14:09:11 +02:00
Hauke Mehrtens
5efe459012 kernel: wpan: Add kmod-ca8210
This device is found on the pistachio marduk board.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-21 11:46:13 +02:00
Hauke Mehrtens
b0751d4c0f kernel: wpan: Add missing AUTOLOAD to load kernel module
These kernel modules were not loaded automatically, fix this by adding
the AUTOLOAD definition.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-21 11:46:13 +02:00
Ansuel Smith
87e92d50e5 kernel: usb: move phy-qcom-ipq806x-usb to ipq806x modules.mk
This driver is only used by ipq806x SoCs. Move it there and drop
dependency from ipq40xx since it's not used anywere.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[rebase on changes to previous patches]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
2020-08-13 02:12:12 +02:00
Ansuel Smith
0c45ad41e1 ipq806x: replace phy dwc3 patch with upstream version
- Replace dwc3 phy patch with upstream version
- Rework the dts to use the upstream bindings
- Update changed config flags
- Rename module to reflect config name

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[fix qcom,tx-deamp_3_5db typo, refresh patches, rename kmod]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
2020-08-13 02:12:12 +02:00
Adrian Schmutzler
d4ac0ad543 treewide: make dependency on kmod-usb-net selective
A bunch of kernel modules depends on kmod-usb-net, but does not
select it. Make AddDepends/usb-net selective, so we can drop
some redundant +kmod-usb-net definitions for DEVICE_PACKAGES.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-10 12:54:30 +02:00
Daniel Golle
cfe235c436 kernel: modules: add package kmod-iosched-bfq
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-08-10 09:52:31 +01:00
Daniel Golle
728a0c68d1 Revert "procd: update to git HEAD"
This reverts commit e0e607f0d0.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-08-06 16:17:37 +01:00
Daniel Golle
e0e607f0d0 procd: update to git HEAD
47a9f0d service: add method to query available container features
 afbaba9 initd: attempt to mount cgroup2
 ead60fe jail: use pidns semantics also for timens
 759e9f8 jail: make use of BLOBMSG_CAST_INT64 for OCI rlimits
 83053b6 instance: add instances into unified cgroup hierarchy
 16159bb jail: parse OCI cgroups resources

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-08-06 15:27:51 +01:00
Rosen Penev
d157ee0c12 staging: remove staging exfat driver
This will be replaced with the driver found in newer kernels.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-08-01 14:54:39 +01:00
Rui Salvaterra
99dae00fa8 kernel: kmod-zram: break the strict dependency from lz4
Zram is only strictly dependent on lzo, not lz4. Break this dependency and
make the lz4 module visible in the configuration, in order for the user to
have the choice of enabling/disabling it, if (s)he sees fit.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2020-07-11 13:33:28 +02:00
Tomasz Maciej Nowak
4d92a558f2 linux-firmware: package EIP197 mini firmware
Quoting part of original message from eefb5f741015 commit in
linux-firmware repository:

This adds the "minifw" version of the EIP197 firmware, which the inside-
secure driver will use as a fallback if the original full-featured
firmware cannot be found. This allows for using the inside-secure driver
and hardware without access to "official" firmware only available under
NDA.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2020-07-11 13:33:28 +02:00
Pawel Dembicki
9c99187e61 kernel: add package for Seiko S-35390A I2C RTC
This patch adds kernel package for Seiko Instruments S-35390A.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-07-11 13:33:28 +02:00
Lucian Cristian
1337093e87 kernel: iscsi-initator: fix kernel config symbols
Enable SCSI low-level drivers on targets that don't have it already in
order to fix following build failures on few platforms:

  .config:4739:warning: symbol value 'm' invalid for SCSI_LOWLEVEL
 * Restart config...
 * SCSI low-level drivers
 SCSI low-level drivers (SCSI_LOWLEVEL) [Y/n] (NEW) aborted!

Fixes: b88f8202c4 ("kernel: add iscsi-initator support")
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
[commit subject and description facelift]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-07-09 10:28:40 +02:00
Petr Štetiar
bbdd99619c kernel: iscsi-initator: fix missing dependency
Fixes following issue:

 Package kmod-iscsi-initiator is missing dependencies for the following libraries:
 crypto_hash.ko

Fixes: b88f8202c4 ("kernel: add iscsi-initator support")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-07-08 21:13:14 +02:00
Lucian Cristian
b88f8202c4 kernel: add iscsi-initator support
Module is needed for using iscsi-initiator userspace applications

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
[added missing newline between kernel modules]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-07-08 16:07:05 +02:00
Scott Roberts
dd13add3ce kernel: i2c-pxa: remove slave
Removing i2c pxa slave

The i2c-pxa is typically not use in slave mode. It does not make sense
to have slave mode enabled by default.
Having slave mode enabled prevents the i2c controller from being reset
if a real slave device such as an SFP is attached to the i2c-pxa bus and
locks it up.
Disable slave mode so that the i2c controller can be reset if the bus is
locked up.
If someone actually has a need for pxa slave mode this can be enabled in
kernel config.

Signed-off-by: Scott Roberts <ttocsr@gmail.com>
2020-06-27 00:19:13 +02:00
Florian Eckert
97bc87d81a kernel: add gpio-amd-fch module description
Add a module description for the new gpio-amd-fch device driver.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2020-06-26 20:54:53 +02:00
Pawel Dembicki
c5356d10c0 kirkwood: move mmc/sd features to modules
All devices are using nand images. Built-in MMC/SD modules are not needed
anymore.

Run tested: pogo v4

Reviewed-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-06-14 21:16:20 +02:00
Tim Harvey
25641709d8 kernel: iio: add drivers for st_lsm6dsx IMU MEMS sensors
Add kmod for the ST LSM6DSX IMU driver.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
[fixed missing regmap module dependencies]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-06-03 16:49:28 +02:00
Tim Harvey
41cab5029b kernel: iio: fix st_accel_{i2c, spi} driver
Add missing kernel module and rename driver

Fixes: 2d8f4c4fbd ("kernel: iio: add st-accel driver modules")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2020-06-03 16:49:28 +02:00
Florian Eckert
0b3e1205df kernel: add gpio-it87
Since commit 910df3f06c we have build in
on all X86/64 platforms the gpio-it87 driver.

Since this change I am getting the following error message on boot.
 > kern.err kernel: [    1.009416] gpio_it87: no device

I do not have this device on my system. To prevent the nonsensical
message and the loading of the module I have added this as a package, so
that it can be installed later or during image building.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
2020-06-03 16:49:28 +02:00
Jeffery To
982d787773 kernel: kmod-ptp-qoriq: Package kernel object file
This updates the package to contain the kernel object (.ko) file instead
of the plain object (.o) file.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>
2020-05-20 15:26:22 +02:00
David Bauer
3f660249e6 kernel: hwmon: add Analog Devices AD741x support
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-04-29 16:03:00 +02:00
Xiaobo Tian
5d81b28a82 kernel: support intel X7xx 10/40GbE adapters
Signed-off-by: Xiaobo Tian <peterwillcn@gmail.com>
[Add i40evf/i40evf.ko and setect CONFIG_IAVF]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-04-26 21:45:41 +02:00
David Bauer
822c342d09 kernel: netdev: fix kmod-sfp symbols
Fixes: ec2f7a47d3 ("kernel: add module to support SFP cages")

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-04-26 14:19:33 +02:00
David Bauer
b359a6b948 kernel: netdev: fix kmod-sfp description capitalization
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-04-26 12:07:58 +02:00
David Bauer
71d5a0d92b kernel: netdev: add phylink dependency for sfp
Fixes: ec2f7a47d3 ("kernel: add module to support SFP cages")

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-04-26 11:48:26 +02:00
David Bauer
b23f72b5b6 kernel: netdev: add kmod-phylink
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-04-26 11:48:14 +02:00
René van Dorst
ec2f7a47d3 kernel: add module to support SFP cages
Enables kernel SFP case support.

Signed-off-by: René van Dorst <opensource@vdorst.com>
2020-04-25 23:45:16 +02:00
Adrian Schmutzler
7b2731a691 kernel: replace "+@" IPV6 dependency by "+"
The combination +@IPV6:kmod-ipsec6 is not valid, the +a:b
syntax implies the @. Fix it.

Fixes: 2e6b6f9fca ("kernel: add @IPv6 dependency to ipv6 modules")

Reported-by: Oldřich Jedlička (@oldium)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-24 13:49:20 +02:00
Kevin Darbyshire-Bryant
9fd36f54f5 Revert "kmod-sched: add act_police"
This reverts commit 1b973b54ea.

It turns out act_police is included in the kmod-sched package so this
package turns out to be superfluous and causes file provision conflicts.

Ooooops!  Best revert it then.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-04-14 08:48:33 +01:00
Lucian Cristian
8f342a39de kernel: hwmon: add dme1737 driver
SMSC DME1737, SCH3112, SCH3114, SCH3116, SCH5027 monitoring support

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2020-04-13 22:11:22 +02:00
Kevin Darbyshire-Bryant
1b973b54ea kmod-sched: add act_police
"Whoop whoop, sound of da police"

Add an ingress capable traffic policer module configurable with tc.

From the man page:

The police action allows to limit bandwidth of traffic matched by the
filter it is attached to. Basically there are two different algorithms
available to measure the packet rate: The first one uses an internal
dual token bucket and is configured using the rate, burst, mtu,
peakrate, overhead and linklayer parameters. The second one uses an
in-kernel sampling mechanism. It can be fine-tuned using the estimator
filter parameter.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-04-10 12:26:31 +01:00
Eneas U de Queiroz
2e6b6f9fca kernel: add @IPV6 dependency to ipv6 modules
IPv6 modules should all depend on @IPV6, to avoid circular dependencies
problems, especially if they select a module that depends on IPV6 as
well.  In theory, if a package A depends on IPV6, any package doing
'select A' (DEPENDS+= A) should also depend on IPV6; otherwise selecting
A will fail.  Sometimes the build system is forgiving this, but
eventually, and unexpectedly, it may blow up on some other commit.

Alternatively one can conditionally add IPv6 dependencies only if
CONFIG_IPV6 is selected: (DEPENDS+= +IPV6:package6).

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2020-04-09 12:51:10 +02:00
Rosen Penev
92792ead34 kmod: add netlink-diag package
This is used by the ss utility from iproute2.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-04-07 20:39:47 +02:00
Tan Zien
02f07c6401 kernel: netdev: add missing config for mlx5 driver
The mlk5 kmod lacks all necessary build symbols
for kernel 4.14 (again).

Add missing symbols to avoid build failure on these targets.

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
[rewrite commit message - reorder symbols]
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-04-06 12:39:00 +02:00
Tan Zien
d24e43a7f6 kernel: Fix miss config and module for mlx driver
Missing config symbols could lead to build failures on kernel
4.14/4.19.

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
[rephrase commit message - reorder symbols]
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-04-04 17:12:43 +02:00
Tan Zien
3ec70052c5 kernel: add module for Mellanox mlx Network Driver
add module to support Mellanox Connect-X card
mlx4 supports ConnectX-3 series and previous cards
mlx5 supports Connect-IB/ConnectX-4 series and later cards

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
2020-04-03 15:33:27 +02:00
Kevin Darbyshire-Bryant
b74386acc6 kmod-sched-cake: switch to in-tree cake for 4.19+
Use in tree version of cake for kernels 4.19+ and backport features from
later kernel versions to 4.19.

Unfortunately PROVIDES dependency handling produces bogus circular
dependency warnings so whilst this package and kmod-sched-cake-oot
should be able to PROVIDE kmod-sched-cake this doesn't work.

Instead, remove the PROVIDES option and modify package sqm-scripts to
depend on the correct module independently.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-04-01 21:59:45 +01:00
Nick Bowler
2785d003d3 kernel: package gpio-f7188x driver
This driver enables support for the GPIO capabilities found in many
Fintek Super-IO chips.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
2020-03-28 13:03:02 +01:00
Nick Bowler
3ad0cf7d93 kernel: package f71808e-wdt driver
This driver enables support for the watchdog timers found in many
Fintek Super-IO chips.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
2020-03-28 13:03:02 +01:00
Nick Bowler
922dfe0fa0 kernel: package f71882fg hwmon driver
This driver enables hardware monitoring support using the sensors
found in many Fintek Super-IO chips.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
2020-03-28 13:03:02 +01:00
Christian Lamparter
d107aaa910 kernel: backport and package drivetemp hwmon from v5.5
This patch backports the hwmon drivetemp sensor module from vanilla
linux 5.5 to be available on OpenWrt's 5.4 kernel.

Extract from The upstream commit by Guenter Roeck <linux@roeck-us.net>:
hwmon: Driver for disk and solid state drives with temperature sensors

"Reading the temperature of ATA drives has been supported for years
by userspace tools such as smarttools or hddtemp. The downside of
such tools is that they need to run with super-user privilege, that
the temperatures are not reported by standard tools such as 'sensors'
or 'libsensors', and that drive temperatures are not available for use
in the kernel's thermal subsystem.

This driver solves this problem by adding support for reading the
temperature of ATA drives from the kernel using the hwmon API and
by adding a temperature zone for each drive.

With this driver, the hard disk temperature can be read [...]
using sysfs:

$ grep . /sys/class/hwmon/hwmon9/{name,temp1_input}
/sys/class/hwmon/hwmon9/name:drivetemp
/sys/class/hwmon/hwmon9/temp1_input:23000

If the drive supports SCT transport and reports temperature limits,
those are reported as well.

drivetemp-scsi-0-0
Adapter: SCSI adapter
temp1:        +27.0<C2><B0>C (low  =  +0.0<C2><B0>C, high = +60.0<C2><B0>C)
                             (crit low = -41.0<C2><B0>C, crit = +85.0<C2><B0>C)
                             (lowest = +23.0<C2><B0>C, highest = +34.0<C2><B0>C)

The driver attempts to use SCT Command Transport to read the drive
temperature. If the SCT Command Transport feature set is not available,
or if it does not report the drive temperature, drive temperatures may
be readable through SMART attributes. Since SMART attributes are not well
defined, this method is only used as fallback mechanism."

This patch incorperates a patch made by Linus Walleij:
820-libata-Assign-OF-node-to-the-SCSI-device.patch
This patch is necessary in order to wire-up the drivetemp
sensor into the device tree's thermal-zones.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-03-21 17:48:34 +01:00
Luiz Angelo Daros de Luca
5a326688ea kernel: load rtl8366_smi and rtl8367b on boot
This external switch driver should be loaded on boot for network support
in failsafe mode.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[alter commit message]
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2020-03-21 12:58:29 +08:00
Mathias Kresin
c01c01891c kernel: kmod-serial-8250: fix linux 5.3 dependencies
Beginning with linux 5.3, kmod-serial-8250 uses functions provided by
serial_mctrl_gpio.ko if GPIO support is enabled.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2020-03-16 22:28:16 +01:00
Sungbo Eo
6508766d24 kernel: make kmod-i2c-mux selected by dependent modules
Currently kmod-i2c-mux-* will not get into images unless kmod-i2c-mux is added
to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to
"select", we do not have the issue anymore.

Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES
and similar variables, as it is now pulled by dependent modules such as:
- kmod-i2c-mux-pca954x

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-03-16 16:26:29 +01:00
Sungbo Eo
4caaa778f7 kernel: make kmod-i2c-core selected by dependent modules
Currently kmod-i2c-* will not get into images unless kmod-i2c-core is added to
DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to
"select", we do not have the issue anymore.

Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES
and similar variables, as it is now pulled by dependent modules such as:
- kmod-hwmon-lm75
- kmod-i2c-gpio
- kmod-i2c-gpio-custom
- kmod-i2c-mux
- kmod-i2c-ralink

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[do not touch ar71xx]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-03-13 15:40:43 +01:00
Sungbo Eo
4159054fbb kernel: make kmod-hwmon-core selected by dependent modules
Currently kmod-hwmon-* will not get into images unless kmod-hwmon-core is added
to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to
"select", we do not have the issue anymore.

Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES
and similar variables, as it is now pulled by dependent modules such as:
- kmod-hwmon-gpiofan
- kmod-hwmon-lm63
- kmod-hwmon-lm75
- kmod-hwmon-lm85
- kmod-hwmon-lm90

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[do not touch ar71xx, adjust line wrapping]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-03-13 14:23:33 +01:00
Kevin Darbyshire-Bryant
5c2b130ec9 kernel: ifb: set default numifbs to 0
By default on module load, 2 ifb interfaces are created and typically
remain unused, cluttering 'ip link' outputs and generally confusing
things.  sqm-scripts for example, creates its own ifb interface/s
instead of using these 2 defaults ifbs.

Tell the ifb module to not create any default ifbs on load via the
numifbs parameter.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-03-13 09:46:55 +00:00
Sungbo Eo
228bb84744 kernel: make kmod-ata-core selected by dependent modules
Currently kmod-ata-* will not get into images unless kmod-ata-core is added to
DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to
"select", we do not have the issue anymore.

Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES
and similar variables, as it is now pulled by dependent modules such as:
- kmod-ata-ahci
- kmod-ata-ahci-mtk
- kmod-ata-sunxi

While at it, use AddDepends/ata for kmod-ata-pdc202xx-old.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-03-11 19:40:03 +01:00
Yousong Zhou
847f3e603d kernel: kmod-fs-exfat: fix typo LINUX_4_{,1}4
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Reported-by: Petr Štetiar <ynezz@true.cz>
2020-03-09 22:40:48 +08:00
DENG Qingfang
b255260bb7 kernel: add exFAT fs driver
This was available since kernel 5.4.  The one provided in packages feed
will be considered deprecated and renamed to kmod-fs-exfat0.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(use name kmod-fs-exfat.  use "@!(LINUX_4_4||LINUX_4_19)" for dependency)
2020-03-09 22:04:59 +08:00
Tim Harvey
1ff8054092 kernel: fix lib-xor for ARM64
use LINUX_KARCH in directory path to avoid failures in non-arm targets.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2020-03-08 15:10:55 +01:00
Petr Štetiar
aae4d85647 kernel: add kernel module for Sensirion SPS30 PMS
Adds into 4.19 backported kernel module from 5.1 for Sensirion SPS30
particulate matter sensor, for kernel 5.4 backported dependency fix.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-08 15:10:55 +01:00
Petr Štetiar
ea1823a867 kernel: iio: split buffer modules into separate packages
Otherwise we would need to enable IIO_TRIGGERED_BUFFER symbol in all
kernels in order to be able to use any of the IIO modules which are
utilizing triggered buffer based data acquisition method.

Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-08 15:10:55 +01:00
Ansuel Smith
57432b9648 modules: fix dwc3-qcom wrong condition
Since now we support both kernel 4.19 and 5.2, change the
condition to remove driver when on kernel 4.14

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-03-03 23:38:23 +01:00
Petr Štetiar
ee92838dd2 kernel: iio: fix st-accel dependencies properly
Add missing register map access SPI/I2C modules.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-02 14:48:53 +01:00
Petr Štetiar
4642c4864e kernel: iio: fix st-accel missing dependency
Fixes following build error on mpc85xx/p2020:

 Package kmod-iio-st_accel is missing dependencies for the following libraries:
  regmap-core.ko

Fixes: 2d8f4c4fbd ("kernel: iio: add st-accel driver modules")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-02 08:44:02 +01:00
Tim Harvey
1d8f21e3a0 kernel: iio: add fxos8700 driver support
Adds various kernel modules for Freescale FXOS8700 3-axis accelerometer.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
[added missing commit description]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-01 21:36:00 +01:00
Tim Harvey
2d8f4c4fbd kernel: iio: add st-accel driver modules
Adds kernel modules for various STMicroelectronics accelerometers.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
[added missing commit description]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-01 21:36:00 +01:00
Tim Harvey
b56e669af9 kernel: can: add MCP251x CAN controller module support
Adds kernel module for Microchip MCP251x SPI CAN controller.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
[added missing commit description]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-01 21:36:00 +01:00
Christian Lamparter
632a7b2997 mvebu: fix build regression due to neon-asm ghash module
This patch fixes the regression caused by adding the NEON
variant of the ghash as the default ghash package package:

> ERROR: module '[...]/arch/arm/crypto/ghash-arm-ce.ko' is missing.
> modules/crypto.mk:286: recipe for target
>  '[...]/kmod-crypto-ghash_4.19.106-1_aarch64_cortex-a53.ipk' failed

This patch limits the scope to the ARM32/cortexa9 target of mvebu.

Fixes: 285df63efc ("kernel: build neon-asm version of ghash module")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-02-29 14:14:08 +01:00
Eneas U de Queiroz
e889489bed kernel: build arm/neon-optimized sha1/512 modules
This builds the regular arm and arm-neon asm optmized modules for sha1
and sha512, for targets that set CONFIG_ARM_CRYPTO.

On ip40xx, the arm-asm version of sha1 improves performance by 5% over
the generic C implementation; sha1-neon is 25% faster than generic,
and sha512-neon, 259%.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2020-02-28 22:46:09 +01:00
Eneas U de Queiroz
285df63efc kernel: build neon-asm version of ghash module
This alone improves AES-GCM performance by up to 50% on ipq40xx.  This
is enabled for targets that support neon and set CONFIG_ARM_CRYPTO:
imx6, ipq40xx, and mvebu.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2020-02-28 22:46:09 +01:00
Hauke Mehrtens
34fcdcd7c2 kernel: Remove nvmem hack patch from 5.4
The nvmem framework is now used in net/ethernet/eth.c and the nvmem
sysfs is split into a separate Kconfig option. More work would be needed
to adapt this patch for the broader use. The current patch compiles fine
on ath79, but it breaks the x86 target.

nvmem is also compiled into the kernel for most of our targets for
example ath79 anyway, so patching the kernel to remove it is now harder
and not the case on multiple targets anyway. Instead of making this work
on kernel 5.4 just remove this hack patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Hauke Mehrtens
f1ff9410f6 kernel: Remove chash.ko from kmod-drm-amdgpu
This module was added with kernel 4.15, but is was removed again with
kernel version 5.3. OpenWrt does not support specifying a kernel version
range so just break it with kernel 4.14 and only support recent kernel
versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Hauke Mehrtens
a847e0ddd2 kernel: Add snd-intel-nhlt.ko to kmod-sound-hda-intel
With kernel 5.4 kmod-sound-hda-intel also needs snd-intel-nhlt.ko, but
this kernel module is only build on x86, make the OpenWrt kmod depend on
TARGET_x86.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Hauke Mehrtens
59f2814c09 kernel: Make kmod-ixgbe depend on kmod-libphy
With kernel 5.4 kmod-ixgbe is depending on kmod-libphy, add this
missing dependency.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Koen Vandeputte
cc34b55b77 kernel: Make kmod-rtc-pcf2123 depend on kmod-regmap-spi
In kernel 5.4 kmod-rtc-pcf2123 depends on kmod-regmap-spi, add this missing
dependency.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-02-28 17:50:46 +01:00
Hauke Mehrtens
19b1739bbe kernel: Make kmod-nft-core depend on kmod-nf-nat
In kernel 5.4 kmod-nf-core depends on kmod-nf-nat, add this missing
dependency.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Hauke Mehrtens
6350118cc3 kernel: Make kmod-fs-f2fs depend on kmod-nls-base
Since kernel 5.4 kmod-fs-f2fs is depending on kmod-nls-base.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Hauke Mehrtens
a09fbd1071 kernel: Add of_touchscreen.ko to kmod-input-touchscreen-ads7846
kmod-input-touchscreen-ads7846 depends on of_touchscreen.ko since
kernel 5.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Hauke Mehrtens
c4072dba76 kernel: Remove kmod-gigaset for kernel 5.4
gigaset was moved to staging in kernel 5.4, just deactivate it on
recent kernel versions instead of adapting it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Hauke Mehrtens
97a5706ea5 kernel: Add roles.ko to kmod-usb-chipidea
kmod-usb-chipidea depends on roles.ko since kernel 5.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Hauke Mehrtens
c86ede094c kernel: Make kmod-gpio-pca953x depend on kmod-regmap-i2c
In kernel 5.4 kmod-gpio-pca953x depends on kmod-regmap-i2c.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Hauke Mehrtens
30d31763f6 kernel: module v4l2-common.ko was removed
The content of v4l2-common.ko was merged into videodev.ko and it was
removed in kernel 5.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Hauke Mehrtens
aa39bbc2ca kernel: Adapt moved crodic.ko module
The module was moved in the kernel, adapt OpenWrt.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Hauke Mehrtens
c4437d4e08 kernel: Add crypto libraries to modules
In kernel 5.3 and 5.4 some crypto modules were split into two modules,
one implementing the crypto algorithm and the other integrating it
into the Linux crypto framework.

Adapt OpenWrt to support this split.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Koen Vandeputte
1556ed155a kernel: mode_beet mode_transport mode_tunnel xfram modules
This adds the new xfrm4_mode_beet, xfrm4_mode_transport,
xfrm4_mode_tunnel and their IPv6 versions on kernel 5.4. These modules
were newly added in kernel 5.2.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-02-28 17:50:46 +01:00
Eneas U de Queiroz
07e1d88d7b kernel: avoid underscore in *6lowpan package names
Packages kmod-bluetooth_6lowpan and kmod-ieee802154_6lowpan contain an
underscore in the package name.  This causes problems in package/install
because when building a list of package files to install offline using
opkg, it uses a wildcard of the form $(dir)/$(pkg)_*.ipk.

If you were to select kmod-bluetooth=y, but kmod-bluetooth_6lowpan=m,
the latter would be picked up by that wildcard, and make package/install
would fail:

Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies
 * for kmod-bluetooth_6lowpan:
 *      kmod-6lowpan
 * opkg_install_cmd: Cannot install package kmod-bluetooth_6lowpan.

Changing the wildcard pattern is not trivial, and there may be other
places in the build system making this assumption about the package name
format.

Using a dash in place of the underscore avoids the issue.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2020-02-19 22:07:40 +01:00
Adrian Schmutzler
7d7aa2fd92 brcm2708: rename target to bcm27xx
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-02-14 14:10:51 +01:00
Adrian Schmutzler
e7bfda2c24 brcm63xx: rename target to bcm63xx
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-14 14:10:51 +01:00
Adrian Schmutzler
8fe5ad5d33 brcm47xx: rename target to bcm47xx
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-14 14:10:51 +01:00
Sungbo Eo
9d03eede18 kernel: fix typos in KernelPackage description
Fixes: ed2839ac41 ("kernel/modules: add kmod-pmbus-zl6100 module")
Fixes: bbcb9de935 ("Add package for gpio rotary encoder")
Fixes: 7685458982 ("package/kernel: package kmod-input-matrixkmap")
Fixes: 8bfef35385 ("kernel: rename kmod-switch-rtl8366_smi to
       kmod-switch-rtl8366-smi to avoid underscores in package names")
Fixes: f03bf608b1 ("kernel: Add dummy sound driver")
Fixes: dda5d9b786 ("ramips: rename pwm kernel module")

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-02-08 17:58:38 +01:00
Daniel Golle
2699ccd084 kernel: hwmon: package mcp3021 module
Package kernel module for Linear Technology MCP3021/3221 I2C connected
current and voltage monitor chips.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-02-02 17:49:20 +02:00
Adrian Schmutzler
9e0aab44b6 kernel: use older kernel for explicitly setting dependencies
It is generally more desirable to use older kernel versions for
dependencies, as this will require less changes when newer kernels
are added (they will by default select the newer packages).

Since we currently only have two kernels (4.14 and 4.19) in master,
this patch applies this logic by converting all LINUX_4_19 symbols
to their inverted LINUX_4_14 equivalents.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-26 22:07:48 +01:00
Russell King
a1358fc7ae kernel: add SFP support for Methode DM7052 NBASE-T module
Add support for Methode DM7052 NBASE-T module to OpenWRT. These
patches are taken from my "phy" branch, and will be sent for the
next kernel merge window.

Signed-off-by: Russell King <linux@armlinux.org.uk>
[jonas.gorski: move patches to pending, refresh patches]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2020-01-21 22:32:48 +01:00
Sungbo Eo
c26b687e31 kernel: remove further obsolete kernel version switches
Most of the kernel version switches below 4.14 were removed in commit
97940f8766 ("kernel: remove obsolete kernel version switches"),
but some of them still remained. Remove them now.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-01-18 19:39:05 +01:00
Adrian Schmutzler
97940f8766 kernel: remove obsolete kernel version switches
After kernel 4.9 has been removed, this removes all (now obsolete)
kernel version switches that deal with versions before 4.14.

Package kmod-crypto-iv is empty now and thus removed entirely.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-12 16:34:20 +01:00
Tobias Schramm
b16e5517b5 kernel: add kmod packages for Broadcom bcm53xxx switch support
Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
2020-01-12 14:12:50 +01:00
Adrian Schmutzler
28fd4ac512 ixp4xx: remove unmaintained target
This target is still on kernel 4.9, and it looks like there is no
active maintainer for this target anymore.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-08 16:45:08 +01:00
Ansuel Smith
1698b36bb4 kernel: make dwc3 usb driver depends on kernel 4.14
- usb-dwc3-of-simple is not used anymore as we have qcom dedicated driver
- usb-phy-qcom-dwc3 is not dependent of dwc3-of-simple

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2019-12-19 22:41:57 +01:00
Christian Lamparter
82a741c774 mac80211: switch to upstream owl-loader driver
The Owl Loader (named after the codename that Atheros gave
these devices back in the day) has been accepted upstream.

This patch removes the "misc" driver OpenWrt had and adds
the remaining differences against the version that ships
with 5.4-rc1 into a separate "120-owl-loader-compat.patch"
file that can be cut down once AR71XX is being dealt with.

Note: I decided to keep the existing (kmod-)owl-loader
package name around for now. The kernel module file in
the kmod package will be called ath9k_pci_owl_loader.ko
though.

Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-11-30 13:21:20 +01:00
Sungbo Eo
6990510aca kernel: fix typo in fb-sys-fops autoload
AutoLoad parameter must match the exact kernel module name. Fix it.

Fixes: 125f1ce9ad ("kernel: video: add DRM core and IMX DRM support for HDMI/LVDS")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2019-11-14 22:53:31 +01:00
Eneas U de Queiroz
3540a37a97 kernel: add crypto_user mod to crypto-user pkg
This is needed to export crypto information to netfilter, allowing
the alt. afalg openssl engine to obtain information about the drivers
being used.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2019-11-06 23:27:20 +01:00
Yousong Zhou
4bf9bec361 kernel: mark kmod-usb-serial-wwan as hidden
The kconfig symbol is an invisible one since its introduction.  It is
not supposed to be enabled on its own.

Resolves FS#1821

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-10-30 12:43:17 +00:00
Yousong Zhou
49db2026e5 kernel: netfilter: reuse kconfig and files info from include dir
Less chance of missing out kconfig symbols at least

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-10-24 12:11:02 +00:00
Mathew McBride
97bcbc690c kernel: add package for Epson RX-8025 and compatible I2C RTC
RX-8025 is an I2C RTC from Epson, some newer products such as the
RX-8035 are also compatible.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
2019-10-19 12:49:11 +02:00
Bjørn Mork
07b5c59232 kernel: fix MBIM description
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2019-10-17 21:40:22 +02:00
Stijn Tintel
4b9a07336a kernel: add kmod-iio-bme680
This driver supports the Bosch Sensortec BME680 gas, humidity, pressure
and temperature sensor.

Tested I2C and SPI modes on a Raspberry Pi Zero W.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-10-13 13:08:04 +03:00
Ruixi Zhou
b30e481b6c kernel: NFSD: add dependency kmod-crypto-arc4 for kmod-fs-nfs-common-rpcsec
crypto-arc4 move into a module with commit c3a78955f3,
fs-nfs-common-rpcsec compile error without arc4 support.

Ref: https://github.com/openwrt/packages/issues/9912

Fixes: c3a78955f3 ("kernel: move crypto-arc4 into a module")
Signed-off-by: Ruixi Zhou <zhouruixi@gmail.com>
2019-10-12 23:51:08 +02:00
Sungbo Eo
9f73fad359 kernel: fix typos in video KernelPackage description
Fixes: 4b3d17b709 ("kernel: add kmod-fb-sys-ram")
Fixes: b774acb479 ("package/modules: add missing gspca video drivers for 2.6.32 (patch from #6595)")

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2019-10-12 23:37:00 +02:00
Hauke Mehrtens
9caa86fba5 kernel: kmod-rtc-pcf2127: Fix dependencies
Add missing dependencies to i2c-core and regmap-spi. These get activated
when these modules are build in this driver, which is the case when we
build all modules. This fixes the build on some targets. This was found
by the buildbot.

Fixes: 34e2526f9f ("kernel: add kmod-rtc-pcf2127")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-10-12 22:36:23 +02:00
Robert Marko
34e2526f9f kernel: add kmod-rtc-pcf2127
Add kernel module to support NXP PCF2127 and PCF2129 RTC clocks.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2019-10-06 21:26:11 +02:00
Alberto Bursi
827f47749b kernel: add module for Emulex OneConnect 10Gbit
add module to support Emulex OneConnect
common in 10Gbit SFP+ cards by Dell/HP/IBM
supports OneConnect OCe10xxx OCe11xxx OCe14xxx, 
LightPulse LPe12xxx

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2019-09-19 23:43:27 +02:00
Felix Fietkau
c3a78955f3 kernel: move crypto-arc4 into a module
It is no longer required by wireless drivers, so we can save some space here

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-08-26 18:21:13 +02:00
Vladimir Vid
52cbe6b9c0 kernel: add i2c-pxa driver
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
2019-08-24 23:11:15 +02:00
Tomasz Maciej Nowak
d6b585eb4e kernel: drop mvebu support in kmod-usb3
This is already enabled as kernel built-in feature in mvebu target and
none other target will use it.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-08-05 23:22:26 +02:00
Kevin Darbyshire-Bryant
4dcef8263e Revert "kmod-sched-cake: drop out of tree package, use kernel version"
This reverts commit 5c094ff660.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-07-29 16:12:42 +01:00
Kevin Darbyshire-Bryant
5c661f5aaa Revert "netsupport: move out sch_cake from kmod-sched"
This reverts commit b31f9190c3.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-07-29 16:11:39 +01:00
Kevin Darbyshire-Bryant
b31f9190c3 netsupport: move out sch_cake from kmod-sched
Fix file installation clash between kmod-sched & kmod-sched-cake as both
try to install sch_cake.ko

Remove cake from kmod-sched package as cake is supposed to be the
optional qdisc.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-07-09 13:54:24 +01:00
Konstantin Demin
5dc7d63d0a netsupport: move out mqprio from kmod-sched
Currently, there's unable to install "kmod-sched-mqprio" after
"kmod-sched" (or vice versa), because "sch_mqprio.ko" is
shipped in both packages.

Fixes: f83522fa63 ("linux: Add kmod-sched-mqprio")
Fixes: 6af639e0bf ("linux: Add kmod-sched-act-vlan")
Fixes: 72c7e2dc46 ("linux: Add kmod-sched-flower")
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
[Add cls_flower and act_vlan]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-07-08 16:42:26 +02:00
Kevin Darbyshire-Bryant
5c094ff660 kmod-sched-cake: drop out of tree package, use kernel version
CAKE made it to kernel 4.19 and since OpenWrt now at kernel 4.19 we can
drop the out of tree cake package in base repository.

Add kmod-sched-cake to netsupport so package dependencies are still met.
Similarly CAKE is retained as an optional qdisc module to avoid base
scheduler package size implications.

Backport upstream patches from k5.1 to address some small bugs and
support fwmark usage.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-07-08 11:05:43 +01:00
Stefan Lippers-Hollmann
cba6832622 kernel: alx driver for AR816x/AR817x Ethernet
These ethernet cards can be found onboard various x86 and
x86_64 Gigabyte mainboards since the sandy-bridge/ ivy-bridge era.

This driver supports the following QCA/"Killer" ethernet cards:

	1969:1091 - AR8161 Gigabit Ethernet
	1969:1090 - AR8162 Fast Ethernet
	1969:10A1 - AR8171 Gigabit Ethernet
	1969:10A0 - AR8172 Fast Ethernet

	1969:E091 - Killer E2200 Gigabit Ethernet
	1969:E0A1 - Killer E2400 Gigabit Ethernet
	1969:E0B1 - Killer E2500 Gigabit Ethernet

Successfully runtime tested with the onboard ethernet card of a
Gigabyte GA-H77M-D3H ivy-bridge mainboard (x86_64/EFI image):

02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 [...]
	Subsystem: Gigabyte Technology Co., Ltd AR8161 [...]
	Kernel driver in use: alx
	Kernel modules: alx

alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [...]
alx 0000:02:00.0 eth0: NIC Up: 1 Gbps Full

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [fix typo,
shorten subject to <50 characters, shorten lines to <76 chars.]
2019-06-22 13:17:47 +02:00
Christian Lamparter
c4fb221376 kernel: fix kmod-tpm 4.19 dependencies
This patch fixes the ath79-nand build error:
|Package kmod-tpm is missing dependencies for the following libraries:
|rng-core.ko

by making it depend on rng-core from 4.19 onwards.
This should work as 4.9 is gone so only 4.14 and 4.19
are there.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-22 13:17:47 +02:00
Chris Koying Browet
0e961a1f9f kernel: dm: add dm-raid for LVM raid
This adds the dm-raid kmod, which is needed for
LVM builtin raid configurations, aka "MD-over-LVM"

Signed-off-by: Chris Koying Browet <cbro@semperpax.com>
2019-06-20 20:02:29 +02:00
Petko Bordjukov
1e2e5c66ed kernel: package Broadcom BNX2X driver
bnx2x driver support for the x86 architecture. Includes module and
firmware for Broadcom QLogic 5771x/578xx 10/20-Gigabit ethernet
adapters.

Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[added +kmod-lib-zlib-inflate as well]
2019-06-20 20:02:29 +02:00
Jo-Philipp Wich
74739c4228 treewide: fix syntax errors exposed after kconfig update
After commit e82a4d9cfb ("config: regenerate *_shipped sources") the mconf
parser became more strict as a side effect and started to spew a series of
warnings when evaluating our generated kconfig sources:

  tmp/.config-package.in:705:warning: ignoring unsupported character '@'

The root cause of these warnings is a wrong use of the @SYMBOL dependency
syntax in various Makefile. Fix the corresponding Makefiles by turning
`@SYM||@SYM2` expressions into the proper `@(SYM||SYM2)` form.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-06-20 14:16:08 +02:00
Yousong Zhou
f528d771c4 netsupport: add kmod-nsh
This is required by kmod-openvswitch since linux 4.15.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-06-20 08:24:20 +00:00
Tomasz Maciej Nowak
7046a249d8 kernel: package module for SafeXcel crypto engine
Supports EIP97 and EIP197 found on Armada 37xx, 7k and 8k SoCs.
Unfortunately firmware for EIP197 is not easily obtainable, therefore
to not cause lot of user requests directed at OpenWrt, package it as
module with explanation where to obtain the firmware.

Cc: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-06-17 09:36:03 +02:00
André Valentin
8f5873f6c8 netsupport: improve xfrm module support
-switch to module autoprobe
-exclude 4.9 kernel

Signed-off-by: André Valentin <avalentin@marcant.net>
2019-06-16 17:32:27 +02:00
Rosen Penev
481fbc3724 kernel: Add AEAD and RNG support to kmod-crypto-user
Now that kernel 3.18 is gone, we can safely add these features.

Tested on Turris Omnia.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-06-15 19:55:31 +02:00
André Valentin
ae3e232b11 netsupport: add xfrmi interface support
Add support for xfrm interfaces in kernel. XFRM interfaces are used by
the IPsec stack for tunneling.
XFRM interfaces are available since linux 4.19.

Signed-off-by: André Valentin <avalentin@marcant.net>
2019-06-09 21:48:22 +02:00
Kevin Darbyshire-Bryant
b8a72dfd28 kernel: backport act_ctinfo
ctinfo is a new tc filter action module.  It is designed to restore
information contained in firewall conntrack marks to other packet fields
and is typically used on packet ingress paths.  At present it has two
independent sub-functions or operating modes, DSCP restoration mode &
skb mark restoration mode.

The DSCP restore mode:

This mode copies DSCP values that have been placed in the firewall
conntrack mark back into the IPv4/v6 diffserv fields of relevant
packets.

The DSCP restoration is intended for use and has been found useful for
restoring ingress classifications based on egress classifications across
links that bleach or otherwise change DSCP, typically home ISP Internet
links.  Restoring DSCP on ingress on the WAN link allows qdiscs such as
but by no means limited to CAKE to shape inbound packets according to
policies that are easier to set & mark on egress.

Ingress classification is traditionally a challenging task since
iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
lookups, hence are unable to see internal IPv4 addresses as used on the
typical home masquerading gateway.  Thus marking the connection in some
manner on egress for later restoration of classification on ingress is
easier to implement.

Parameters related to DSCP restore mode:

dscpmask - a 32 bit mask of 6 contiguous bits and indicate bits of the
conntrack mark field contain the DSCP value to be restored.

statemask - a 32 bit mask of (usually) 1 bit length, outside the area
specified by dscpmask.  This represents a conditional operation flag
whereby the DSCP is only restored if the flag is set.  This is useful to
implement a 'one shot' iptables based classification where the
'complicated' iptables rules are only run once to classify the
connection on initial (egress) packet and subsequent packets are all
marked/restored with the same DSCP.  A mask of zero disables the
conditional behaviour ie. the conntrack mark DSCP bits are always
restored to the ip diffserv field (assuming the conntrack entry is found
& the skb is an ipv4/ipv6 type)

e.g. dscpmask 0xfc000000 statemask 0x01000000

|----0xFC----conntrack mark----000000---|
| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
| DSCP       | unused | flag  |unused   |
|-----------------------0x01---000000---|
      |                   |
      |                   |
      ---|             Conditional flag
         v             only restore if set
|-ip diffserv-|
| 6 bits      |
|-------------|

The skb mark restore mode (cpmark):

This mode copies the firewall conntrack mark to the skb's mark field.
It is completely the functional equivalent of the existing act_connmark
action with the additional feature of being able to apply a mask to the
restored value.

Parameters related to skb mark restore mode:

mask - a 32 bit mask applied to the firewall conntrack mark to mask out
bits unwanted for restoration.  This can be useful where the conntrack
mark is being used for different purposes by different applications.  If
not specified and by default the whole mark field is copied (i.e.
default mask of 0xffffffff)

e.g. mask 0x00ffffff to mask out the top 8 bits being used by the
aforementioned DSCP restore mode.

|----0x00----conntrack mark----ffffff---|
| Bits 31-24 |                          |
| DSCP & flag|      some value here     |
|---------------------------------------|
			|
			|
			v
|------------skb mark-------------------|
|            |                          |
|  zeroed    |                          |
|---------------------------------------|

Overall parameters:

zone - conntrack zone

control - action related control (reclassify | pipe | drop | continue |
ok | goto chain <CHAIN_INDEX>)

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make suitable adjustments for backporting to 4.14 & 4.19
and add to SCHED_MODULES_FILTER

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-06-06 15:41:07 +01:00
Sebastian Meiling
239b79f668 kernel: add package for atusb wpan module
This adds a new package for the kernel module of the ATUSB WPAN driver.

Signed-off-by: Sebastian Meiling <s@mlng.net>
[fixed SoB: and From: mismatch]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-06 15:40:08 +02:00
Kevin Darbyshire-Bryant
24e09bac48 Revert "kernel: backport act_ctinfo"
This reverts commit 7c50182e0c.

Produces build error:
Package kmod-sched is missing dependencies for the following libraries:
nf_conntrack.ko

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-06-06 10:45:15 +01:00
Kevin Darbyshire-Bryant
7c50182e0c kernel: backport act_ctinfo
ctinfo is a new tc filter action module.  It is designed to restore
information contained in firewall conntrack marks to other packet fields
and is typically used on packet ingress paths.  At present it has two
independent sub-functions or operating modes, DSCP restoration mode &
skb mark restoration mode.

The DSCP restore mode:

This mode copies DSCP values that have been placed in the firewall
conntrack mark back into the IPv4/v6 diffserv fields of relevant
packets.

The DSCP restoration is intended for use and has been found useful for
restoring ingress classifications based on egress classifications across
links that bleach or otherwise change DSCP, typically home ISP Internet
links.  Restoring DSCP on ingress on the WAN link allows qdiscs such as
but by no means limited to CAKE to shape inbound packets according to
policies that are easier to set & mark on egress.

Ingress classification is traditionally a challenging task since
iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
lookups, hence are unable to see internal IPv4 addresses as used on the
typical home masquerading gateway.  Thus marking the connection in some
manner on egress for later restoration of classification on ingress is
easier to implement.

Parameters related to DSCP restore mode:

dscpmask - a 32 bit mask of 6 contiguous bits and indicate bits of the
conntrack mark field contain the DSCP value to be restored.

statemask - a 32 bit mask of (usually) 1 bit length, outside the area
specified by dscpmask.  This represents a conditional operation flag
whereby the DSCP is only restored if the flag is set.  This is useful to
implement a 'one shot' iptables based classification where the
'complicated' iptables rules are only run once to classify the
connection on initial (egress) packet and subsequent packets are all
marked/restored with the same DSCP.  A mask of zero disables the
conditional behaviour ie. the conntrack mark DSCP bits are always
restored to the ip diffserv field (assuming the conntrack entry is found
& the skb is an ipv4/ipv6 type)

e.g. dscpmask 0xfc000000 statemask 0x01000000

|----0xFC----conntrack mark----000000---|
| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
| DSCP       | unused | flag  |unused   |
|-----------------------0x01---000000---|
      |                   |
      |                   |
      ---|             Conditional flag
         v             only restore if set
|-ip diffserv-|
| 6 bits      |
|-------------|

The skb mark restore mode (cpmark):

This mode copies the firewall conntrack mark to the skb's mark field.
It is completely the functional equivalent of the existing act_connmark
action with the additional feature of being able to apply a mask to the
restored value.

Parameters related to skb mark restore mode:

mask - a 32 bit mask applied to the firewall conntrack mark to mask out
bits unwanted for restoration.  This can be useful where the conntrack
mark is being used for different purposes by different applications.  If
not specified and by default the whole mark field is copied (i.e.
default mask of 0xffffffff)

e.g. mask 0x00ffffff to mask out the top 8 bits being used by the
aforementioned DSCP restore mode.

|----0x00----conntrack mark----ffffff---|
| Bits 31-24 |                          |
| DSCP & flag|      some value here     |
|---------------------------------------|
			|
			|
			v
|------------skb mark-------------------|
|            |                          |
|  zeroed    |                          |
|---------------------------------------|

Overall parameters:

zone - conntrack zone

control - action related control (reclassify | pipe | drop | continue |
ok | goto chain <CHAIN_INDEX>)

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make suitable adjustments for backporting to 4.14 & 4.19

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-06-06 09:41:26 +01:00
Hauke Mehrtens
1325e74e0c kernel: Remove support for kernel 3.18
No target is using kernel 3.18 anymore, remove all the generic
support for kernel 3.18.

The removed packages are depending on kernel 3.18 only and are not used on
any recent kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-05-03 22:41:38 +02:00
Hauke Mehrtens
cd3b298533 omap24xx: Remove unmaintained target
This target only supports kernel 4.1, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-05-03 21:27:12 +02:00
Robert Marko
a9190ee3a4 kernel: iio: Fix BMP280 Auto probing
Currently Auto probing for BMP/BME280 does not work because kernel
module name in the call is not correct.
Package name was used instead of kernel module name.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2019-05-02 09:35:35 +02:00
Lucian Cristian
e762f5d44a kernel: Fix kmod-drm-amdgpu and kmod-drm-radeon dependencies
Currently the Geode builds fails on following kernel module missing
dependencies:

 Package kmod-drm-amdgpu is missing dependencies for the following libraries:
 backlight.ko
 drm_kms_helper.ko
 fb.ko
 ttm.ko

So this patch tries to fix the kmod-drm-amdgpu module dependecies.

Fixes: 2f239c0 ("x86: video: add amdgpu DRM kernel package")
Fixes: 2f6918e ("x86: video: add radeon DRM module support")
Tested-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2019-04-16 22:51:29 +02:00
Christian Lamparter
d599890efd layerscape: unbreak ehci-fsl interaction with mpc85xx
Both targets have their own idea of how to use ehci-fsl.
This patch reverts part of commit
68b8d3b079 ("kernel: usb: add FSL EHCI package") and moves
ehci-fsl back into kmod-usb2, while also making it hopefully
useable for the mpc85xx target.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-04-15 00:20:56 +02:00
David Bauer
68b8d3b079 kernel: usb: add FSL EHCI package
Add kernel module package for the Freescale USB2 EHCI used on the
mpc85xx platform.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-04-13 15:09:09 +02:00
Rosen Penev
2a8175a7ac kernel: Add RIPEMD160 module
After getting rid of cryptsetup's heavy openssl dependency, there is now
the problem of missing RIPEMD160 support. RIPEMD160 is used for True/Vera
crypt volumes as well as old LUKS1 ones.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-04-06 19:14:06 +02:00
Luis Araneda
177a634e18 kernel: can: add Xilinx CAN IP kernel module package
This driver is required to use the CAN IP on devices
from the zynq target

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-04-06 16:31:10 +02:00
Luis Araneda
82b0230bc1 kernel: sound: add missing symbol to sound-soc-core
This fixes compilation on zynq target when migrating
to sound kmod packages

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-04-06 16:31:10 +02:00
Tomasz Maciej Nowak
6541897796 kernel: package rtc-em3027 module
Support for Microelectronic EM3027 real time clock chip.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-06 14:48:46 +02:00
Tomasz Maciej Nowak
42f96ed941 tegra: add new target
New target introduces initial support for NVIDIA Tegra SoC based devices.
It focuses on Tegra 2 CPUs, for successors supporting NEON instruction
set the target should be split in two subtargets.
This initial commit doesn't create any device image, it's groundwork
for further additions.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-06 14:48:46 +02:00
Koen Vandeputte
555ee02f77 kernel: fix missing dependency in 4.14.108
The 4.14.108 bump introduced a missing dependency when building
specific netfilters.

Thsi was not seen as the error does not occur on all targets.

Thanks to Jo-Philipp Wich for providing the fix

Fixes: af6c86dbe5 ("kernel: bump 4.14 to 4.14.108")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-03-27 16:46:39 +01:00
Hauke Mehrtens
6af639e0bf linux: Add kmod-sched-act-vlan
This allows to configure rules to push or pop vlan headers.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2019-03-25 22:50:28 +01:00
Hauke Mehrtens
72c7e2dc46 linux: Add kmod-sched-flower
This allows to classify packets based on a configurable combination
of packet keys and masks.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2019-03-25 22:50:28 +01:00
Hauke Mehrtens
f83522fa63 linux: Add kmod-sched-mqprio
This adds Multi-queue priority scheduler (MQPRIO).

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2019-03-25 22:50:28 +01:00
Hauke Mehrtens
187ab0bceb linux: Add kmod-crxypto-xcbc
This can be used for IPsec.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2019-03-25 22:50:28 +01:00
Stijn Tintel
02cd7f8b7a kernel: fix kmod-input-touchscreen-ads7846 deps
On targets that don't have input support enabled in the kernel config,
building kmod-input-touchscreen-ads7846 fails due to a missing
dependency on kmod-input-core. Add the dependency to fix this.

Fixes: 77a54bbf13 ("kernel: add kmod-input-touchscreen-ads7846")
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-02-25 01:07:20 +02:00
Stijn Tintel
77a54bbf13 kernel: add kmod-input-touchscreen-ads7846
This module adds support for ADS7846 based touchscreens used in devices
like the WaveShare 3.5" and 4" LCD displays designed for Raspberry Pi.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-02-24 01:17:01 +02:00
Stijn Tintel
c22cde2ea1 kernel: add kmod-fb-tft-ili9486
This module adds support for the ILI9486 LCD controller used in devices
like the Waveshare 3.5" and 4" LCD displays designed for Raspberry Pi.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-02-24 01:15:22 +02:00
Stijn Tintel
9f4a7de48a kernel: add kmod-fb-tft
This module adds support for small TFT LCD display modules. While this
module also exists in the 4.9 kernel, we are not going to support this
kernel in the next major release, so don't make it available for 4.9.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-02-24 01:15:22 +02:00
Stijn Tintel
4b3d17b709 kernel: add kmod-fb-sys-ram
The kernel modules that provide support for framebuffers in system RAM
are currently included in the kmod-drm-imx package. Move them to a
separate package, so that other modules can depend on them.

Increase the autoload order of the drm-imx* packages to load the modules
after loading the fb modules they depend on.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-02-24 01:15:05 +02:00
Stijn Tintel
e03deb8cae kernel: add kmod-iio-ccs811
This module supports the AMS CCS811 VOC sensor.
Tested on Raspberry Pi Zero W and ODROID C2.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-02-23 17:22:53 +02:00
Hauke Mehrtens
7878215a56 x86: Make kmod-drm-radeon and kmod-drm-amdgpu depend on x86
Currently these kernel packages only work on x86, restrict them to that
target.

Fixes: 2f239c02a0 ("x86: video: add amdgpu DRM kernel package")
Fixes: 2f6918ee9b ("x86: video: add radeon DRM module support")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-02-20 00:02:50 +01:00
Oldřich Jedlička
66e875a070 kernel: Added required dependencies for socket match.
This applies to kernel 4.10 and newer.

See 8db4c5be88

The above commit added to kernel 4.10 added new dependency
for building the NETFILTER_XT_MATCH_SOCKET (xt_socket.ko)
module. The NF_SOCKET_IPVx options (both of them) need to
be enabled in order to build the NETFILTER_XT_MATCH_SOCKET
module. Without the change the module is not built.

Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
2019-02-17 19:22:39 +01:00
Lucian Cristian
2f239c02a0 x86: video: add amdgpu DRM kernel package
build amdgpu kernel as modules so it will find the firmware files

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2019-02-17 19:22:39 +01:00
Lucian Cristian
2f6918ee9b x86: video: add radeon DRM module support
add radeon module support so firmware can be loaded from userland

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2019-02-17 19:22:39 +01:00
Alin Nastac
5241f9005c ipset: add support for hash(ip,mac)
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-02-17 12:00:02 +01:00
Tony Ambardar
ebcd5226cc kernel/modules: add kmod-bpf-test package
Add the test_bpf module that runs various test vectors against the BPF
interpreter or BPF JIT compiler. The module must be manually loaded, as
with the kmod-crypto-test module which serves a similar purpose.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-02-11 20:18:48 +00:00
Tony Ambardar
6be23e91b6 kernel/modules: add kmod-sched-bpf package
Add cls_bpf and act_bpf modules for additional tc classifier and action
support of cBPF and eBPF.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-02-11 20:18:48 +00:00
Tony Ambardar
cd465e3414 kernel/modules: add kmod-sched-ipset package
Add em_ipset module to support tc filter classification by IP set. Build
as a standalone package to help avoid pulling in rest of kmod-sched and
isolate new dependency on kmod-ipt-ipset.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-02-11 20:18:48 +00:00
Tony Ambardar
59b58ad4c8 kernel/modules: kmod-sched: add some common, useful actions
Add act_pedit, act_csum, act_gact and act_simple modules for additional
tc action support. Module act_simple helps with debug and logging, similar
to iptables LOG target, while act_gact provides common generic actions.
Modules act_pedit and act_csum support general packet mangling, and have
been the subject of feature requests and forum discussions (e.g. DSCP),
as well as being added to the Turris OS fork of OpenWrt ~2 years ago.

Also select dependency kmod-lib-crc32c to support act_csum.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-02-11 20:18:48 +00:00
Tony Ambardar
f54e9f183e kernel/modules: kmod-sched-core: add missing dependency, useful module
All tc ematch modules, including those in kmod-sched-core and kmod-sched,
use cls_basic as a core dependency. Relocate cls_basic from kmod-sched to
kmod-sched-core to avoid requiring kmod-sched unnecessarily.

This change is also backwards compatible since any past tc ematch users
will have had to install both kmod-sched-core and kmod-sched anyway.

Add the matchall kernel module cls_matchall introduced in kernel 4.8. The
matchall classifier matches every packet and allows the user to apply
actions on it. It is a simpler, more efficient replacement for the common
but cryptic tc classifier idiom "u32 match u32 0 0".

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-02-11 20:18:48 +00:00
Petr Štetiar
3b40121530 kernel: Fix drm dependency on drm_panel_orientation_quirks.ko for 4.19
Package kmod-drm is missing dependencies for the following libraries:

 drm_panel_orientation_quirks.ko

It seems, that since Linux 4.15-rc2 drm depends on drm_panel_orientation_quirks.ko

 commit 8d70f395e6cbece665b12b4bf6dbc48d12623014
 Author: Hans de Goede <j.w.r.degoede@gmail.com>
 Date:   Sat Nov 25 20:35:49 2017 +0100

    drm: Add support for a panel-orientation connector property, v6

    On some devices the LCD panel is mounted in the casing in such a way that
    the up/top side of the panel does not match with the top side of the
    device (e.g. it is mounted upside-down).

    This commit adds the necessary infra for lcd-panel drm_connector-s to
    have a "panel orientation" property to communicate how the panel is
    orientated vs the casing.

    Userspace can use this property to check for non-normal orientation and
    then adjust the displayed image accordingly by rotating it to compensate.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-02-01 17:35:34 +01:00
Karl Pálsson
04b418ac84 kernel: add kmod-usb-gadget-cdc-composite
This builds the "g_cdc" gadget module, providing ethernet+serial.

Signed-off-by: Karl Pálsson <karlp@etactica.com>
2019-01-27 01:04:37 +01:00
Hauke Mehrtens
fd5c168701 kernel: Build: Split kmod-regmap
This reduces the needed modifications to the mainline Linux kernel and
also makes the regmap package work with an out of tree kernel which
does not have these modifications.

The regmap-core is only added when it is really build as a module.
The regmap-core is normally bool so it cannot be built as a module in an
unmodified kernel. When it is selected by on other kernel module it will
always be selected as build in and it also does not show up in
$(LINUX_DIR)/modules.builtin as it is not supposed to be a kernel module.
When it is not in $(LINUX_DIR)/modules.builtin the build system expects
it to be built as a .ko file.
Just check if the module is really there and only add it in that case.

This splits the regmap package into multiple packages, one for each bus type.
This way only the bus maps which are really needed have to be added.
This also splits the I2C, SPI and MMIO regmap into separate packages to not
require all these subsystems to build them, on an unmodified upstream kernel
this also causes problems in some situations.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2019-01-27 00:16:13 +01:00
Hauke Mehrtens
c7102a7699 kernel/modules: Fix build of kmod-pmbus
This fixes two build problems introduced with the recently added new
kernel module package.

Fixes: ed2839ac41 ("kernel/modules: add kmod-pmbus-zl6100 module")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-13 13:16:02 +01:00
Pawel Dembicki
ed2839ac41 kernel/modules: add kmod-pmbus-zl6100 module
This patch adds the kmod packaging for the Intersil / Zilker Labs
ZL6100 and compatible digital DC-DC controllers as well as the
core kernel module for the Power Management Bus.

Add:
kmod-pmbus-core
kmod-pmbus-zl6100

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2019-01-13 11:07:37 +01:00
Pawel Dembicki
0fbd3d23aa kernel: 4.19: kmod-ptp-gianfar follow upstream changes
This patch deprecates the kmod-ptp-gianfar package and
introduces kmod-ptp-qoriq for 4.19+ in its place. This
has become necessary due to the linux kernel commit
ceefc71d4c05 ("ptp: rework gianfar_ptp as QorIQ common PTP driver")

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
2019-01-05 22:09:07 +01:00
Petr Štetiar
08ef53d2fb kernel: Fix kmod-w1 dependency on hwmon-core for 4.19
kmod-w1 depends on kmod-hwmon-core since Linux 4.14

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-01-03 18:05:47 +01:00
Petr Štetiar
9d11726d6c kernel: Fix rtc-ds1307 dependency on hwmon-core for 4.19
It seems, that since Linux 4.18-rc1 rtc-ds1307 depends on hwmon-core.

 commit 6b583a64fd1e019fd01626b46892ebf2361951c5
 Author: Heiner Kallweit <hkallweit1@gmail.com>
 Date:   Wed Sep 27 22:41:26 2017 +0200

    rtc: ds1307: simplify hwmon config

    We don't have to define an extra config symbol, IS_REACHABLE does
    what we need. And having this config symbol just to save the few
    bytes of hwmon support on non-DS3231 chips isn't worth it IMO
    (especially as the symbol is set per default).

While at it, use the same dependency check for `kmod-regmap` as well, so
it's future proof as well.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-01-03 18:05:47 +01:00
Robert Marko
c9f6116fd0 kernel: modules: usb: Add DWC3 Qualcomm kmod
Since kernel 4.18 support for Qualcomm glue layer was
moved from DWC3 OF Simple to a separate DWC3 QCOM module.
So lets add it and make it depend on 4.19 kernel and make
sure that DWC3 OF Simple is not included if 4.19 is used.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2018-12-27 14:06:38 +01:00