3 Commits

Author	SHA1	Message	Date
Shiji Yang	6f31941d38	Revert "ramips: convert MT7915 EEPROM to NVMEM format" ... Some MT7915 devices need to load the second part of the eeprom to work properly. The mt76 driver is not yet ready to read the pre-cal data via the NVMEM cell. Therefore, partially revert commit to fix the device probe issue on some devices. P.S. Except for D-Link and Ubnt devices, It is still uncertain whether pre-cal data is required for other devices in the patch. This partially reverts commit 9ac891f8c4. Fixes: https://github.com/openwrt/openwrt/issues/13700 Signed-off-by: Shiji Yang <yangshiji66@qq.com>	2023-10-17 20:57:07 +08:00
Shiji Yang	9ac891f8c4	ramips: convert MT7915 EEPROM to NVMEM format ... This patch converts MT7915 WiFi calibration data to NVMEM format. The EEPROM size is 0xe00. Signed-off-by: Shiji Yang <yangshiji66@qq.com>	2023-10-09 11:15:52 +02:00
Leon M. Busch-George	f6d394e9f2	ramips: add support for Cudy M1800 ... Specifications SoC: MT7621 CPU: 880 MHz Flash: 32 MiB RAM: 256 MiB WLAN: MT7915 WiFi 6 (2.4/5 GHz) Ethernet: 2x Gbit ports MAC LAN b4:4b:d6:2e:c7:b0 (label) WAN b4:4b:d6:2e:c7:b1 WiFi 2.4 00:0c:43:26:46:08 WiFi 5 00:0c:43:26:59:97 Installation There are two known options: 1) The Luci-based UI. 2) Press and hold the reset button during power up. The router will request 'recovery.bin' from a TFTP server at 192.168.1.88. Both options require a signed firmware binary. The openwrt image supplied by cudy is signed and can be used to install unsigned images. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>	2023-01-06 19:22:52 +01:00