Commit Graph

4282 Commits

Author SHA1 Message Date
Mauri Sandberg
2c211a901d gpio-nxp-74hc153: remove package
This module was used solely by Buffalo WZR-HP-G300NH devices
and has become obsolete with the introduction of gpio-cascade.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
2022-02-19 13:10:01 +01:00
Mauri Sandberg
2f50d65161 kernel: add package kmod-gpio-cascade
Adds kernel module for Generic GPIO cascade.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [missing commit description]
2022-02-19 13:10:01 +01:00
Mauri Sandberg
15f0074beb kernel: add package kmod-multiplexer
Adds new kernel module for GPIO controlled multiplexer support.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [missing commit description]
2022-02-19 13:10:01 +01:00
Felix Fietkau
5a0975f7ef mt76: update to the latest version
ddd3c2f38b30 mt76: redefine mt76_for_each_q_rx to adapt mt7986 changes
7fa5229a4228 mt76: improve signal strength reporting
025a72cd2d24 mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDU
8c765fd92d97 mt76: mt7615: introduce SAR support
799a15bb68f9 mt76: fix endianness errors in reverse_frag0_hdr_trans
c114919f0c08 mt76: mt7915: Fix channel state update error issue
93191a37e59a mt76: mt7915: fix potential memory leak of fw monitor packets
cde589b2efb7 mt76: mt7921s: fix missing fc type/sub-type for 802.11 pkts
6ef22f4dc4e4 mt76: mt7915: add support for MT7986
7f1818cd8f2d mt76: mt7915: introduce band_idx in mt7915_phy
1d57a0d506db mt76: mt7915: initialize smps mode in mt7915_mcu_sta_rate_ctrl_tlv()
1f2a4816a3de mt76: mt7615: fix compiler warning on frame size
d60f335e785b mt76: mt7915: fix endianness warnings in mt7915_debugfs_rx_fw_monitor
d0ab636cb61c mt76: mt7915: fix endianness warnings in mt7915_mac_tx_free()
9d9bd7b3c48c mt76: connac: adjust wlan_idx size from u8 to u16
be1091f1172d mt76: mt7615: Fix assigning negative values to unsigned variable
d4fc42889a30 mt76: mt7915: check band idx for bcc event
98ee3e2889ea mt76: mt7915: fix logic error and remove the unused member of mt7915_dev
bbbbafb67bac mt76: mt7915: fix compiler warning
abd80cf68db1 mt76: mt7915: fix the muru tlv issue
a050c14b5631 mt76: mt7915: use min_t() to make code cleaner
9fee8f3736eb mt76: mt7915e: Fix degraded performance after temporary overheat
f2e1a62cf0d0 mt76: mt7915e: Add a hwmon attribute to get the actual throttle state.
c67df0d3130a mt76: mt7915e: Enable thermal management by default

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-15 15:18:22 +01:00
Felix Fietkau
eae0dbf68c mac80211: fix traffic stalls on forwarded mesh packets due to wrong AC selection
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-15 15:17:01 +01:00
Felix Fietkau
2fd208e272 mac80211: fix rekey failure in drivers with 802.3 decap offload
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-12 23:03:51 +01:00
Ansuel Smith
4d904524ef kernel: bpf-headers: fix build error when testing kernel is used
Now that we have separate files for each kernel version,
only the version/hash for the target kernel are available.
This cause a missing hash error (and wrong kernel version) for
bpf-headers when a testing kernel version is used for the current target.

Fix this error by manually including the kernel version/hash file for the
specific kernel version requested.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-02-06 12:43:57 +01:00
Christian Lamparter
fcd5fd49c5 kernel: usb: remove left-over LINUX_5_10 dependency symbol
this should have been removed together with linux 5.4 APM821XX
support. Currently, this didn't hurt or broke something. But it
will in the next stable kernel release.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-04 21:13:15 +01:00
Felix Fietkau
8c1d5129ee bpf-headers: fix build error from within the SDK
The SDK does not ship the generic platform files. Use relative path for
GENERIC_PLATFORM_DIR to make it work. This points it at the files from
the feed directory instead of the base SDK path

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-04 12:51:48 +01:00
Sven Eckelmann
8a8b7b4234 om-watchdog: Drop unused package
All devices which used this package migrated to the kernel GPIO-line
watchdog driver and configure it over their DT.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2022-02-03 22:27:15 +01:00
Felix Fietkau
e045e40671 mt76: update to the latest version
833b9d7fcf7f mt76: allow drivers to drop rx packets early
f703084f31cb mt76: mt7915: process txfree and txstatus without allocating skbs
047b9a9e78b3 mt76: mt7615: in debugfs queue stats, skip wmm index 3 on mt7663
fea36e02075c mt76: only kick tx queue if frames were queued
8381e54ebfb5 linux-firmware: update firmware for MT7921 WiFi device
d57dadb8c861 Revert "mt76: only kick tx queue if frames were queued"
3a21d6e2153b mt76: mt7663: disable 4addr capability
f1d66cf7a6c5 mt76: connac: fix possible NULL pointer dereference in mt76_connac_get_phy_mode_v2
c9a4146404d4 sync with upstream
4ed8c910b94e mt76: mt7921: fix possible resume failure
bf105aa6cd2f mt76: mt7921: fix network buffer leak by txs missing
e2b454b6fb30 mt76: connac: introduce MCU_EXT macros
5a87f5497c9b mt76: connac: align MCU_EXT definitions with 7915 driver
720ddc32507d mt76: connac: remove MCU_FW_PREFIX bit
da5128a59eda mt76: connac: introduce MCU_UNI_CMD macro
116109bee7cb mt76: connac: introduce MCU_CE_CMD macro
f96fbdf038d5 mt76: connac: rely on MCU_CMD macro
922f0d408413 mt76: mt7915: rely on mt76_connac definitions
b4ae1da1d1e0 mt76: mt7921: reduce log severity levels for informative messages
db105a722b87 mt76: mt7921s: make pm->suspended usage consistent
e2cc063238c0 mt76: mt7921s: fix suspend error with enlarging mcu timeout value
812b73f2f1e0 mt76: mt7915: introduce mt76_vif in mt7915_vif
b041a8a30055 mt76: mt7915: add mu-mimo and ofdma debugfs knobs
b851a3e7839d mt76: mt7921: remove dead definitions
266c7a9f2994 mt76: connac: rely on le16_add_cpu in mt76_connac_mcu_add_nested_tlv
19cc7d83190c mt76: mt7921: clear pm->suspended in mt7921_mac_reset_work
928c4550e413 mt76: mt7921s: make pm->suspended usage consistent [update]
8d6c68a7d0d1 mt76: mt7921: fix possible resume failure [update]
26fb105e538c mt76: mt7921s: fix cmd timeout in throughput test
9db482264389 mt76: mt7921: fix build regression
3edb87cdf138 mt7915: formatting change to sync with upstream
5cad38ba247d mt76: mt7915: add mt7915_mmio_probe() as a common probing function
15f9f88b362a mt76: mt7915: refine register definition
de49cf43ef34 mt76: add MT_RXQ_MAIN_WA for mt7916
6032c35f1306 mt76: mt7915: rework dma.c to adapt mt7916 changes
074d7c5381ed mt76: mt7915: add firmware support for mt7916
27b3253318e7 mt76: mt7915: rework eeprom.c to adapt mt7916 changes
030540246088 mt76: mt7915: enlarge wcid size to 544
400129c69f91 mt76: mt7915: add txfree event v3
cbbb3f65fcd0 mt76: mt7915: update rx rate reporting for mt7916
eb51c4deef0e mt76: mt7915: update mt7915_chan_mib_offs for mt7916
fb4709222028 mt76: mt7915: add mt7916 calibrated data support
e758feeaf1d6 mt76: mt7915: add device id for mt7916
115ea27a5cab mt76: connac: fix sta_rec_wtbl tag len
b3f922266685 mt76: mt7915: rely on mt76_connac_mcu_alloc_sta_req
bac5eda1f5b2 mt76: mt7915: rely on mt76_connac_mcu_alloc_wtbl_req
b44485d5c8ac mt76: mt7915: rely on mt76_connac_mcu_add_tlv routine
9cc58e254d53 mt76: connac: move mt76_connac_mcu_get_cipher in common code
60dcd9f09ff6 mt76: connac: move mt76_connac_chan_bw in common code
a8d0b7d0cc60 mt76: mt7915: rely on mt76_connac_get_phy utilities
4441db30c1c1 mt76: connac: move mt76_connac_mcu_add_key in connac module
794b6f18d0fb mt76: mt7915: fix code defect
9d2a01b6cb60 mt76: set wlan_idx_hi on mt7916
2c89977b32c2 mt76: mt7915: fix kernel build warning
6c4874839830 mt76: make mt76_sar_capa static
215fdcc7ca6c mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode
bc254718b40e mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv
22fcff5ff21a mt76: sdio: lock sdio when it is needed
4669882aa595 mt76: mt7921s: clear MT76_STATE_MCU_RUNNING immediately after reset
944545855e0f mt76: mt7921s: update mt7921s_wfsys_reset sequence
854c8d076a34 mt76: mt7915: move pci specific code back to pci.c
a77da27796f2 mt76: mt7915: fix warning: variable 'base' is used uninitialized
7b5e69961c71 mt76: mt7915: fix warning: variable 'flags' set but not used
b5138e7b89f9 mt76: mt7921: fix a possible race enabling/disabling runtime-pm
af218fbe2500 linux-firmware: update firmware for MT7921 WiFi device
31c19c467950 mt76: mt7915: remove duplicated defs in mcu.h
9198eca1b16f mt76: connac: move mt76_connac_mcu_bss_omac_tlv in connac module
829d87a93a51 mt76: connac: move mt76_connac_mcu_bss_ext_tlv in connac module
50956cf17901 mt76: connac: move mt76_connac_mcu_bss_basic_tlv in connac module
bda40f4e1d5e mt76: mt7915: rely on mt76_connac_mcu_sta_ba_tlv
4728939c1d48 mt76: mt7915: rely on mt76_connac_mcu_wtbl_ba_tlv
e3ae1828068b mt76: mt7915: rely on mt76_connac_mcu_sta_ba
d9e9989eca07 mt76: mt7915: rely on mt76_connac_mcu_wtbl_generic_tlv
168713595fff mt76: mt7915: rely on mt76_connac_mcu_sta_basic_tlv
60394d3e3504 mt76: mt7915: rely on mt76_connac_mcu_sta_uapsd
3a79454d078d mt76: mt7915: rely on mt76_connac_mcu_wtbl_smps_tlv
9ae9aa6c1aea mt76: mt7915: rely on mt76_connac_mcu_wtbl_ht_tlv
fd8cdfab91e4 mt76: mt7915: rely on mt76_connac_mcu_wtbl_hdr_trans_tlv
a92024c5a5b5 mt76: connac: move mt76_connac_mcu_wtbl_update_hdr_trans in connac module
6dc585a3a274 mt76: connac: introduce is_connac_v1 utility routine
0f29d2aa5a72 mt76: connac: move mt76_connac_mcu_set_pm in connac module
dcf408ff8a5e mt76: mt7921: get rid of mt7921_mcu_get_eeprom
77b2a8601fc1 mt76: mt7915: rely on mt76_connac_mcu_start_firmware
65f78dee243a mt76: connac: move mt76_connac_mcu_restart in common module
5adf5b14040b mt76: mt7915: rely on mt76_connac_mcu_patch_sem_ctrl/mt76_connac_mcu_start_patch
69bf1dabe78f mt76: mt7915: rely on mt76_connac_mcu_init_download
951b1ddd370e mt76: connac: move mt76_connac_mcu_gen_dl_mode in mt76-connac module
0826b3992238 mt76: mt7915: rely on mt76_connac_mcu_set_rts_thresh
058de6d36fa9 mt76: connac: move mt76_connac_mcu_rdd_cmd in mt76-connac module
aafda86aed2b mt76: mt7921e: make dev->fw_assert usage consistent
def12bef91a3 mt76: mt7921: forbid the doze mode when coredump is in progress
009414d27d37 mt76: mt76_connac: fix MCU_CE_CMD_SET_ROC definition error
3c5856eca223 mt76: mt7921: set EDCA parameters with the MCU CE command
01a3d73b452e mt76: mt7615: fix a possible race enabling/disabling runtime-pm
123ed864d1ae mt76: mt7921e: process txfree and txstatus without allocating skbs
018f98abba68 mt76: connac: add support for passing the cipher field in bss_info
288e7443e35c mt76: mt7615: update bss_info with cipher after setting the group key
36e1577cb3d3 mt76: mt7915: update bss_info with cipher after setting the group key
d42590d8fcc8 mt76: make cipher in struct mt76_vif u8 instead of enum
11602b8505c6 mt76: mt7615e: process txfree and txstatus without allocating skbs
2ef775c10bd3 linux-firmware: add firmware for MT7916
976ea3879730 mt76: mt7915: add support for passing chip/firmware debug data to user space
d11bd7bd83f4 tools: add support for sending firmware debug data via udp
dc8e2e8dcd34 mt76: mt7921: do not always disable fw runtime-pm
7063127f852b mt76: mt7921: fix a leftover race in runtime-pm
f78f4334b0b2 mt76: mt7615: fix a leftover race in runtime-pm
f1f94d19c160 mt76: mt7915: fix ht mcs in mt7915_mac_add_txs_skb()
c2ff2f0d6d19 mt76: mt7921: fix ht mcs in mt7921_mac_add_txs_skb()
3e7954a0b32e mt76: mt7921s: fix mt7921s_mcu_[fw|drv]_pmctrl
3c2cc9034376 mt76: mt7921e: fix possible probe failure after reboot
f7f6c6dcc6eb mt76: mt7921: fix crash when startup fails.
8656198c925b mt76: sdio: disable interrupt in mt76s_sdio_irq
6204d61ab821 mt76: mt7921: fix endianness issues in mt7921_mcu_set_tx()
68c5aa56f5f2 mt76: mt7921: toggle runtime-pm adding a monitor vif
541e4e8d3c3e mt76: mt7915: set bssinfo/starec command when adding interface
78770f741af9 mt76: mt7915: introduce mt7915_set_radar_background routine
93c03778f92e mt76: mt7915: enable radar trigger on rdd2
4c76a6c3a1f2 mt76: mt7915: introduce rdd_monitor debugfs node
5b94045f927e mt76: mt7915: report radar pattern if detected by rdd2
22094b27ff6a mt76: mt7915: enable radar background detection
4282ca57a143 mt76: connac: move mt76_connac_lmac_mapping in mt76-connac module
0f16c67657a2 mt76: mt7915: add missing DATA4_TB_SPTL_REUSE1 to mt7915_mac_decode_he_radiotap
9a16d33311a7 mt76: mt7921: remove duplicated code in mt7921_mac_decode_he_radiotap
639b55fdc95e mt76: mt7615: add support for LG LGSBWAC02 (MT7663BUN)
ebbd2717a16e mt76: mt7663s: flush runtime-pm queue after waking up the device
37c3bf2256de mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update
96959bd15eef mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update
4e42e55ce636 mt76: stop the radar detector after leaving dfs channel
8b32439d5a86 mt76: mt7915: fix possible memory leak in mt7915_mcu_add_sta
b4e6f0d6f15a mt76: mt7921s: fix a possible memory leak in mt7921_load_patch
15398f1e8385 mt76: mt7915: fix mcs_map in mt7915_mcu_set_sta_he_mcs()
607eda6eb032 mt76: mt7915: update max_mpdu_size in mt7915_mcu_sta_amsdu_tlv()
69d20f2e6cb0 mt76: mt7915: fix the nss setting in bitrates
c3ffa536249a mt76: sdio: honor the largest Tx buffer the hardware can support
e3e3562f8fa0 mt76: mt7921s: run sleep mode by default
553200cf63fd firmware: update mt7662 firmware to version 2.3
20d1fed838b9 mt76x02: improve mac error check/reset reliability
9b2ac62d6f31 mt76: mt76x02: improve tx hang detection
fae295af31eb mt76: mt7915: fix/rewrite the dfs state handling logic
e0f9479bf893 mt76: mt7615: fix/rewrite the dfs state handling logic
822e1135e7e1 mt76: mt76x02: use mt76_phy_dfs_state to determine radar detector state
f8c0ed1e6bdf mt76: do not always copy ethhdr in reverse_frag0_hdr_trans
ab9b8078427a mt76: dma: initialize skip_unmap in mt76_dma_rx_fill

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03 15:16:47 +01:00
Felix Fietkau
0b5a547ef0 mac80211: backport support for background radar detection
Will be used in an upcoming mt76 update

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03 15:16:47 +01:00
Felix Fietkau
03ea0405a6 mac80211: backport MBSSID/EMA support patches
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03 15:16:47 +01:00
Felix Fietkau
543ada64ed mac80211: reorganize patches
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03 15:16:47 +01:00
Felix Fietkau
02b9b6872a mac80211: backport support for ndo_fill_forward_path
Will be used in an upcoming mt76 update

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03 15:16:47 +01:00
Etienne Champetier
1ebb8e3b6b netfilter: add kmod-nft-compat
This modules is required by iptables-nft

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-02-02 23:24:03 +01:00
Marek Behún
45d541bb40 kernel: add kmod-vrf
Add option to compile kmod-vrf, support for Virtual Routing and
Forwarding (Lite).

This module depends on NET_L3_MASTER_DEV, which is a boolean kernel
option, so we need to create a configuration option also for this, and
make kmod-vrf depend on it.

Signed-off-by: Marek Behún <kabel@kernel.org>
2022-02-01 22:59:09 +01:00
Hauke Mehrtens
6cab21bd6d kernel: Make kmod-usb-net-lan78xx depend on kmod-of-mdio
kmod-usb-net-lan78xx depends on kmod-of-mdio when this package is
activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-02-01 21:25:02 +01:00
Tiago Gaspar
ef4c97576b netfilter: correct some dependencies
nf-nathelper-extra and nf-conntrack-netlink had iptables related
dependencies, yet, when looking for the respective kernel symbols and
checking it's dependencies it was confirmed that iptables wasn't
required and that these were either it's own moodule or tool independent
(nftables or iptables).

Correct these and make sure no unneeded extras are pulled in.

Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
2022-01-27 09:56:40 +01:00
Hauke Mehrtens
71bdff9139 ltq-vdsl-mei: Remove static linking
This removes -static compile option. The -static option tells GCC to
link this statically with the libc, which we do not want in OpenWrt. We
want to link everything dynamically to the libc. This fixes a compile
problem with glibc.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-01-21 23:09:24 +01:00
Christian Lamparter
0a08d4faad kernel: add missing kmod+regmap-i2c dependency for NCT7802Y module
x86, mt7623 and others buildbot failed due to:
|Package kmod-hwmon-nct7802 is missing dependencies for the following libraries:
|regmap-core.ko
|regmap-i2c.ko

Fixes: 1ed50b92d1 ("package: kernel: add driver module for NCT7802Y")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-15 19:55:14 +01:00
Pawel Dembicki
9149ed4f05 mvebu: cortexa9: Add support for Ctera C200-V2
2-Bay NAS - maximum two 3.5" Harddisks

Hardware:
  - SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC)
  - Ram: 1GB (2x Nanya NT5CC512M8DN-D1)
  - NAND Flash: 256MB (ESMT F59L2G81A-25T)
  - Lan: 1x GBE (Marvell 88E1318-NNB2)
  - Storage: 2x SATA HDD 3.5" Slot
  - USB: 2x USB 3.0 port (Renesas uPD720202)
  - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
  - LEDs: 13x GPIO controlled
  - Buttons: 2x GPIO controlled

Known issues:
  - Buzzer is unused due lack of proper driver
  - USB1/2 usbport ledtrigger won't work (through DT)
  - Renesas uPD720202 requires firmware file. It's possible to find
    non-free binary. Please look for 'UPDATE.mem' file and put in into
    '/lib/firmware/renesas_usb_fw.mem' file.

Installation:
  - Apply factory initramfs image via stock web-gui.
  - Do sysupgrade to make installation complete.

Back to stock:
  - OpenWrt rootfs partition use unused space after stock firmware.
  - Full revert is possible.
  - Login via ssh and run:

 ## ctera_c200-v2_back_to_factory start ##
 . /lib/functions.sh
 part=$(find_mtd_part "active_bank")
 active_bank=$(strings "$part" | grep bank)
 if [ "$active_bank" = "bank1" ]; then
 	echo "bank2" > /tmp/change_bank
 else
 	echo "bank1" > /tmp/change_bank
 fi
 mtd write /tmp/change_bank active_bank
 reboot
 ## ctera_c200-v2_back_to_factory end ##

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(put back-to-stock script into commit message, removed dup. SUBPAGESIZE var,
added 01_leds for non-working dt-usb-port trigger)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-15 17:41:19 +01:00
Pawel Dembicki
1ed50b92d1 package: kernel: add driver module for NCT7802Y
This commit add package with hwmon-nct7802 module.

This driver implements support for the Nuvoton NCT7802Y hardware monitoring
chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan
speed sensors.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(fixed c&p'ed module description)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-15 17:41:19 +01:00
Josef Schlehofer
31647d8be8 kernel: add kmod-usb-net-lan78xx
Add kernel module for Microchip LAN78XX based USB 2 & USB 3
10/100/1000 Ethernet adapters. [1]

This kernel module is required for the Seeed Studio's Mini Router
based on RPI CM4 [2].

[1] <https://cateee.net/lkddb/web-lkddb/USB_LAN78XX.html>
[2] <https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html>

Link: <https://github.com/openwrt/openwrt/pull/4893>
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(added kmod-phy-microchip and kmod-fixed-phy dependencies,
rpi3 needs lan78xx but has it built-in)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-08 23:23:22 +01:00
Christian Lamparter
3fabca8894 kernel: provide kmod-fixed-phy as separate kmod
Almost all targets have the fixed-phy feature built into the kernel.
One big exception is x86. This caused a problem with the upcoming
LAN78xx usb driver. Hence this patch breaks out the fixed-phy from
of_mdio (which didn't include the .ko) and puts into a separate
module.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-08 23:20:21 +01:00
Christian Lamparter
d9ff9a4270 kernel: add kmod-phy-microchip
phy drivers for Microchip's LAN88xx PHYs.
This is needed for the "LAN7801" variant
of the upstream lan78xx usb ethernet driver.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-08 23:17:18 +01:00
Marty Jones
3fe253c6ab linux-firmware: add new package r8152-firmware
Linux upstream commit 9370f2d05a
add load firmware file through request_firmware,this affect the
nanopi r2s and some USB adapters in kernel 5.10 with this error:
'r8152 4-1:1.0: unable to load firmware patch rtl_nic/rtl8153b-2.fw'
This patch split the USB NIC firmware files from r8169 firmware,
and adds r8152-firmware to r8152 driver.
Add kmod-usb-net-cdc-ncm to support RTL8156A and RTL8156B 2.5G ethernet
adapters supported since v5.13-rc1.
195aae321c

Signed-off-by: Marty Jones <mj8263788@gmail.com>
2022-01-08 00:49:59 +01:00
Jan Hoffmann
9d878d8422 ltq-ifxos: update to 1.7.1
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
[fix warnings, switch to tag tarball, update patches]
Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-01-08 00:49:59 +01:00
Andre Heider
5ee1e04517 ltq-vdsl: move to the default device name /dev/dsl_cpe_api/0
This makes patching it for ltq-vdsl-app unnecessary and paves the way
for VRX518 support.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-01-08 00:49:59 +01:00
Daniel Kestrel
b61d756b6c ltq-deu: disable arc4 algorithm
ARC4 was used for WEP, which is not secure anymore. Therefor it is
disabled in the driver, but the code is not removed for now.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:23:15 +01:00
Daniel Kestrel
fc4d88cf73 ltq-deu: add aes_gcm algorithm
The lantiq AES hardware does not support the gcm algorithm. But it
can be implemented in the driver as a combination of the aes_ctr
algorithm and the xor plus gfmul operations for the hashing.
Due to the wrapping of the several algorithms and the inefficient
16 byte block by 16 byte block invokation in the kernel
implementations, this driver is about 3 times faster for the larger
block sizes.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:23:15 +01:00
Daniel Kestrel
973e28f248 ltq-deu: change PKG_RELEASE to AUTORELEASE
As per suggestion by adschm, PKG_RELEASE is set to AUTORELEASE.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:23:15 +01:00
Daniel Kestrel
a0d6b09c36 ltq-deu: remove redundant code for setting the key in aes
After adding xts and cbcmac the aes algorithm source had three sections
for setting the aes key to the hardware which are identical.
Method aes_set_key_hw was created which is now called from within the
spinlock secured control sections in methods ifx_deu_aes, ifx_deu_aes_xts
and aes_cbcmac_final_impl and reduces the size of ifxmips_aes.c.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:23:15 +01:00
Daniel Kestrel
79efaa7f8f ltq-deu: add shash cbcmac-aes algorithm to the driver
Since commit 53b6783 hostapd is using the kernel api which includes the
cbcmac-aes shash algorithm. The kernels implementation is a wrapper around
the aes encryption algorithm, which encrypts block (16 bytes) by block.
When the ltq-deu driver is present, it uses hardware aes, but every 16 byte
encrypt requires setting the key. This is very inefficient and is a huge
overhead. Since the cbcmac-aes is simply a hash that uses the cbc aes
algorithm starting with an iv set to x'00' with an optional ecb aes
encryption of a possible last incomplete block that is padded with the
positional bytes of the last cbc encrypted block, this algorithm is now
added to the driver. Most of the code is derived from md5-hmac and
tailored for aes. Tested with the kernels crypto testmgr including extra
tests against the kernels generic ccm module implementation.
This patch also fixes the overallocation in the aes_ctx that is caused
by using u32 instead of u8 for the aes keys.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:23:15 +01:00
Daniel Kestrel
f8e5c6080c ltq-deu: remove driver disablement for kernel 5.4 and above
Remove the dependency on kernel 5.4 from the Makefile to allow the
driver to compile with kernel 5.10 or kernel versions higher than
5.4.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:23:15 +01:00
Daniel Kestrel
43422deed3 ltq-deu: add aes_xts algorithm
The lantiq AES hardware does not support the xts algorithm. Apart
from the cipher text stealing (XTS), the AES XTS implementation is
just an XOR with the IV, followed by AES ECB, followed by another
XOR with the IV and as such can be also implemented by using the
lantiq hardware's CBC AES implemention plus one additional XOR with
the IV in the driver. The output IV by CBC AES is also not usable
and the gfmul operation not supported by lantiq hardware. Both need
to be done in the driver too in addition to the IV treatment which is
the initial encryption by the other half of the input key and to
set the IV to the IV registers for every block.
In the generic kernel implementation, the block size for XTS is set
to 16 bytes, although the algorithm is designed to process any size
of input larger than 16 bytes. But since there is no way to
indicate a minimum input length, the block size is used. This leads
to certain issues when the skcipher walk functions are used, e.g.
processing less than block size bytes is not supported by calling
skcipher_walk_done.
The walksize is 2 AES blocks because otherwise for splitted input
or output data, less than blocksize is to be returned in some cases,
which cannot be processed. Another issue was that depending on
possible split of input/output data, just 16 bytes are returned while
less than 16 bytes were remaining, while cipher text stealing
requires 17 bytes or more for processing.
For example, if the input is 60 bytes and the walk is 48, then
processing 48 bytes leads to a return code of -EINVAL for
skcipher_walk_done. Therefor the processed counter is used to
figure out, when the actual cipher text stealing for the remaining
bytes less than blocksize needs to be applied.
Measured with cryptsetup benchmark, this XTS AES implementation is
about 19% faster than the kernels XTS implementation that uses the
hardware ECB AES (ca. 18.6 MiB/s vs. 15.8 MiB/s decryption 256b key).
The implementation was tested with the kernels crypto testmgr against
the kernels generic XTS AES implementation including extended tests.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:23:08 +01:00
Daniel Kestrel
006fee0dad ltq-deu: update initialisations for hmac algorithms
The processing in the hmac algorithms depends on the status fields:
count, dbn and started. Not all were initialised in the init method
and after finishing the final method. Added missing fields to init
method and call init method after finishing final.
The memsets have the wrong size in the original driver and did not
clear everything and are not necessary. Since no memset is done in
the kernels generic implementation, memsets were removed.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:23:05 +01:00
Daniel Kestrel
6ade9d1dda ltq-deu: remove compiler warning and shorten locked sections
Removing hash pointer in _hmac_setkey since its not needed and causes
a compiler warning.
Make the spinlock control sections shorter and move initializations
out of the control sections to free the spinlock faster for allowing
other threads to use the hash engine.
Minor improvements for indentation and removal of blanks and blank
lines in some areas.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:23:02 +01:00
Daniel Kestrel
0470b05b56 ltq-deu: fix temp size exceed in hmac algorithms
Exceeding the temp array size was not checked and instead storage not
allocated by the driver was used/overwritten which in most cases
resulted in reboots. This patch implements processing the input to the
hash algorithm in tempsize chunks.
The _hmac_final methods were changed to _hmac_final_impl adding a
parameter that indicates intermediate or final processing. The started
variable was added to the context to indicate, if there is an
intermediate result in the context. For sha1_hmac the variable to store
the intermediate hash was added to the context too.
In order to avoid md5_hmac_final_impl being recursively called if the
padding of the input and the resulting last transform during the hmac
algorighms final processing causes the temp array to overflow and to
make sure that there is at least one block in the temp array when the
_hmac_final for final processing is called, the check for exceeding
the temp array in _hmac_transform was moved before copying the block
and incrementing dbn. dbn needs to be at least 1 at final processing
time to let the hash engine apply the opad operation.
To make the hash engine not apply the hmac algorithms final opad
operation, for intermediate processing the dbn in the control register
is set to a higher value than number of dbns are actually processed.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:22:59 +01:00
Daniel Kestrel
85383b3112 ltq-deu: fix setkey errors and static shared temp for hmac algos
The hmac algorithms state, that keys larger than the key size should be
hashed with the underlying hash algorithms and then those hashes are to
be used as keys. This patch implements this. In order to avoid allocating
a descriptor during setkey, a shash_desc pointer is added to the context.
Another issue for multithreaded callers is the shared temp array.
The temp array is static and as such would be shared among multithreaded
callers, which obviously would neither work nor produce correct results.
The temp array (4k size) is moved to the context and since the size of
the context is limited, it can only be defined as pointer otherwise the
initialisation of the hash algorithm fails.
The allocations and freeing of both the temp and the desc pointer in the
context are done by implementing cra_init and cra_exit functions for
the hmac algorithms.
Also improved indentation in some areas.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:22:57 +01:00
Daniel Kestrel
9cb1875d2f ltq-deu: fix ifxdeu-ctr-rfc3686(aes) not matching generic impl
Error ifxdeu-ctr-rfc3686(aes) (16) doesn't match generic impl (20) occurs
when running the cryptomgr extra tests that compare against the linux
kernels generic implementation.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:22:53 +01:00
Daniel Kestrel
34a3eaf07f ltq-deu: changes for hash multithread callers and md5 endianess
The algorithms sha1, sha1_hmac and md5_hmac all use ENDI=1. The md5
algorithm uses ENDI=0 and the endian_swap methods to reverse the
endianess switch by using user CPU time, which is unnecessary overhead.
Danube and AR9 devices do not set endianess for SHA1, so is done for
MD5.
Furthermore the patch replaces endian_swap with le32_to_cpu for md5 and
md5 hmac algorithms and removes endian_swap for them.
The init functions initialize the algorithm in the hardware. The lock is
not used to write to the control register. If another thread calls
another hash algo before update or final, the result will be wrong.
Therefore move the algorithm init to the lock protected sections in the
transform or final methods.
Setting the hw key for the hmac algorithms is now done from within the
lock protected sections in their final methods. The lock protecting is
removed from the _hmac_setkey_hw functions.
In final for md5 and sha1 the lock section is removed, because all the
work was already done in transform (which is called from final). As such
only copying the hash to the output is required.
MD5 and MD5_HMAC produce 16 byte hashes (4 DWORDS) only, therefor
writing register D5R to the hash output is removed for MD5_HMAC.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:22:50 +01:00
Daniel Kestrel
87a19c9345 ltq-deu: make deu hash lock global and remove md5_hmac_ exports
All hash algorithms use the same base IFX_HASH_CON to access the hash unit.
Parallel threads should not be able to call different hash algorithms and
therefor a global lock is required.
Fixed linker warning, that md5_hmac_init, md5_hmac_update and
md5_hmac_final are static export symbols. The export symbols are not
required, because the functions are exposed using shash_alg structure.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:22:48 +01:00
Daniel Kestrel
536dc6f164 ltq-deu: add aes_ofb and aes_cfb algorithms
The functions ifx_deu_aes_cfg and ifx_deu_aes_ofb have been part of the
driver ever since. But the functions and definitions to make the
algorithms actually usable were missing.
This patch adds the neccessary code for aes_ofb and aes_cfb algorithms.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:22:45 +01:00
Daniel Kestrel
cd01d41c77 ltq-deu: fix cryptomgr test errors for aes
When running cryptomgr tests against the driver, there are several
occurences of different errors for even and uneven splitted data in the
underlying scatterlists for the ctr and ctr_rfc3686 algorithms which are
now fixed.
Fixed error in ctr_rfc3686_aes_decrypt function which was introduced with
the previous commit by using CRYPTO_DIR_ENCRYPT in the decrypt function.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:22:42 +01:00
Daniel Kestrel
19cb3c9dff ltq-deu: fix cryptomgr test errors for des
When running cryptomgr tests against the driver, there are several
occurences of different errors for setkey of des and des3-ede
algorithms.
Those key checks are already implemented in the kernels des
implementation, so this is added as dependency and the kernel methods
are called. It also required adding the kernels des/des3 context
definitions to the des_ctx internal structure to be able to call the
kernel methods.
Fixed ifxdeu-des... setkey unexpectedly succeeded on test vector x;
expected_error=-22.
Fixed ifxdeu-des... setkey failed on test vector x; expected_error=0,
actual_error=-22.
Renamed des_ctx internal structure and des_encrypt/des_decrypt methods
because they are already defined in the kernel module.
Fixed wrong DES_xxx constant definitions in crypto_alg definition for
ifxdeu_des3_ede_alg.
Fixed method comment errors.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:22:38 +01:00
Daniel Kestrel
e84c4b54f3 ltq-deu: convert SHA1 after library impl of SHA1 was removed
The <linux/cryptohash.h> was removed with Linux 5.8, because it only
contained the library implementation of SHA1, which was folded
into <crypto/sha.h>.
So switch this driver away from using <linux/cryptohash.h>.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:22:35 +01:00
Daniel Kestrel
737bd4f296 ltq-deu: convert blkcipher to skcipher
Convert blkcipher to skcipher for the synchronous versions of AES,
DES and ARC4.
The Block Cipher API was depracated for a while and was removed with
Linux 5.5. So switch this driver to the skcipher API.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:22:30 +01:00
Daniel Kestrel
c8967d6d12 ltq-deu: set correct control register for AES
Some devices initialize AES during boot and AES works out of the box
and the correct endianess is set.
NDC means (No Danube Compatibility Mode) and the endianess setting has
no effect if its set to 0.
NDC 0: OFF ENDI bit cannot be written as in Danube
To make it work for other devices, the NDC control register needs to
be set to 1.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-06 00:22:18 +01:00
Mathias Kresin
8dafa98bfb ltq-deu: make cipher/digest usable by openssl
OpenSSL with cryptdev support uses the data encryption unit (DEU) driver
for hard accelerated processing of ciphers/digests, if the flag
CRYPTO_ALG_KERN_DRIVER_ONLY is set.

Signed-off-by: Mathias Kresin <dev@kresin.me>
[fix commit title prefix]
Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-05 23:05:38 +01:00