Commit Graph

6 Commits

Author SHA1 Message Date
Felix Fietkau
6cc5919e8a ipq806x: disable DMA on the SPI flash
Previous patch 6f2905eeb6ce5ddec8d12d677e1f377a940b537b enabled ADM in
the kernel, which causes a kernel panic when accessing the SPI flash.

As a workaround, We'll disable DMA for the flash for now. It was not
enabled previously anyway so we'll just leave it as is.

Reported-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46587
2015-08-13 19:02:16 +00:00
Felix Fietkau
d523866eb3 ipq806x: add NAND flash controller support
These patches add support for ipq806x NAND flash controller. Most of
these are cherry-picked & backported from LKML:
*https://lkml.org/lkml/2015/8/3/16

This patch just modifies the kernel code, but doesn't change the config.
It should be harmless.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46568
2015-08-07 08:36:31 +00:00
Felix Fietkau
c7bf2accc9 ipq806x: Add ADM support
These are cherry-picked & backported from LKML:
*https://lkml.org/lkml/2015/3/17/19

They are enabled on both 3.18 and 4.1 kernel. Patches 150 to 154 are
applying changes merged since 3.18; they enable mechanisms used by the
ADM driver.

ADM engine is used by the NAND controller, so it is necessary to
bring-up NAND flash support.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46567
2015-08-07 08:36:16 +00:00
Felix Fietkau
0f7de49fa3 ipq806x: fix freeze in PCIe code when booting with an old u-boot
Old bootloader (same ones which have DT disabled) don't perform any PCIe
initialization. The consequence is a freeze during PCIe bring-up on
these old u-boot. Same kernel with a newer bootloaders works fine as
they contain the corresponding PCIe init code.

In this change, we'll add the missing init and make sure the kernel
doesn't rely on some preexisting init to get PCIe to work. That includes
the following changes:
*GPIOs: set function & drive strength
*Clocks: add init code for aux & ref clocks
*PCIe driver: additional init of the hardware controller

Tested 3.18 and 4.1 on an AP148 with bootloader branch 0.0.1

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46557
2015-08-04 23:10:03 +00:00
Felix Fietkau
f7651fdba5 ipq806x: fix pcie pinmux naming in ipq806x dts
PCIe controller nodes are numbers 0/1/2 in the chipset dtsi file, but
the pinmux nodes are numbers 1/2/3. We'll make it consistent by changing
the pinmux numbering to match the controller's one.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46556
2015-08-04 23:09:55 +00:00
John Crispin
d2a2eb7e48 ipq806x: replace caf nss-gmac driver by upstream stmmac
This driver has been cherry-picked and backported from the following
LKML thread:
*https://lkml.org/lkml/2015/5/26/744

It also updates the DT accordingly.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45831
2015-05-29 12:26:01 +00:00