Commit Graph

254 Commits

Author SHA1 Message Date
Felix Fietkau
6b654ab741 uboot-oxnas: fix build error on non-linux systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-19 12:48:28 +02:00
Piotr Dymacz
14ee2b0642 uboot-envtools: add support for jjPlus JWAP230
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-07-13 20:03:10 +02:00
Piotr Dymacz
c30fd5e87d uboot-envtools: add support for Wallys DR531
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-07-13 20:03:10 +02:00
Hauke Mehrtens
3f38356893 packages: prefer http over git for git protocol
In company networks everything except the http and https protocol is
often causes problems, because the network administrators try to block
everything else. To make it easier to use LEDE in company networks use
the https/http protocol for git access when possible.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-22 19:32:06 +02:00
Mathias Kresin
b32eb40210 uboot-lantiq: Add Arcadyan ARV7506PW11 support
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-06-22 19:32:06 +02:00
Daniel Golle
fac7ba1abc uboot-envtools: add support for ZBT-WG2626
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-19 16:22:23 +02:00
John Crispin
928163bad2 uboot-envtools: add ipq806x support
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
Felix Fietkau
704965d93f uboot-envtools: add config for WBMR300 (lantiq)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-12 14:53:18 +02:00
Felix Fietkau
57343b210a uboot-lantiq: get rid of bogus profile dependencies
Turn them into subtarget dependencies instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-08 06:42:42 +02:00
Felix Fietkau
7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Mathias Kresin
c065cb08db uboot-lantiq: VGV7510KW22 - remove NOR SPL leftovers
Missed this one with my last cleanup patch.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
b0a202ebdc uboot-lantiq: Add Arcadyan VGV7519 support
Based on a submission to the uboot-lantiq repo by Eddi De Pieri.

Major cleanup and addition of brnboot second stage u-boot was done by
me.

The second stage brnboot u-boot is untested, since the brnboot prompt
is secured by a still unknown password. But should work.

The former ram values are replaced with the ram values extracted from
the original brnboot. The old ones didn't worked with the ramboot
image.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
ecf10d3796 uboot-lantiq: vrx200 - lzma compress gphy firmware
The default bootloader partition of some devices is to small for an
u-boot with uncompressed gphy firmware(s).

Instead of increasing the bootloader partition size, in compare to the
stock firmware, compress the firmware. This would allow the bootloader
of at least the FritzBox 3370 as well as the bootloader of the
VGV7510KW22 to fit into the bootloader partition of the stock firmware.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
8df4eb0b9b uboot-lantiq: vrx200 - add support for dual nor flash
Based on a submission to the uboot-lantiq repo by Eddi De Pieri.

Devices like the xrx200 Arcadyan VGV7519 are using two NOR flash chips.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Sven Eckelmann
3f508fce77 package/uboot-envtools: add OpenMesh MR1750v2 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:26 +02:00
Sven Eckelmann
00943e0931 package/uboot-envtools: add OpenMesh OM2P-HSv3 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:24 +02:00
Mathias Kresin
e81acacaa3 uboot-lantiq: ARV752DPW - use correct switch driver
There is no RTL8206 switch driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
a22feb4c78 uboot-lantiq: VGV7510KW22 - use ddr ram params from brnboot
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
382282eca9 uboot-lantiq: VGV7510KW22 - use leds to indicate boot status
Switch on the red power led if kernel image can't be loaded. Otherwise
switch the green led on.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
9e8edcff99 uboot-lantiq: VGV7510KW22 - cleanup board config
According to the author, all SPI related configs are copy & paste
leftovers. Which makes sense since nothing is connected to the SPI bus
on this device.

The NOR SPL isn't required for this board, since the NOR is directly
memory mapped.

Allow to overwrite the env in ram while using brn variant. Do not set
the power GPIO pin twice.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
b3795d0c93 uboot-lantiq: reorder and rework patches
use:
  - 00nn for u-boot patches
  - 01nn for new boards

While doing the rework, the board definitions for the easy50712 and
easy80920 were moved to distinct board definitions patches.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
74b1687be3 uboot-lantiq: drop unused board patches
None of the boards is supported by lede. No need to keep the patches in
the lede tree.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Andrew Yong
374cae9e6f ramips: add initial support for SamKnows SK-WB8
Signed-off-by: Andrew Yong <me@ndoo.sg>
2016-05-12 03:29:35 +02:00
John Crispin
be1985471e zynq: Add Zybo device support
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49257
2016-04-26 11:44:29 +00:00
John Crispin
869d3adc37 Zynq: Add Zedboard device support
Tested-by: Joe Zhang <jz21082@gmail.com>
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49256
2016-04-26 11:44:26 +00:00
John Crispin
152da8b240 lantiq: uboot-envtools on BTHOMEHUBV3A
Generate fw_env.config for BTHOMEHUBV3A.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 49236
2016-04-26 11:43:11 +00:00
Hauke Mehrtens
012da658a4 oxnas: add support for Akitio MyCloud mini
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49197
2016-04-19 20:12:41 +00:00
John Crispin
eeaf5035df uboot-envtools: add OpenMesh OM5P-ACv2 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49153
2016-04-09 10:26:28 +00:00
John Crispin
2b541ce3f9 uboot-envtools: add OpenMesh OM5P-AC support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49146
2016-04-09 10:26:04 +00:00
Zoltan Herpai
2d4ebff3ad package: uboot-sunxi: various changes - bump to 2016.03 - add bugfixes related to 2016.03 update - sync DTS files with mainline - add support for non-standard uEnv.txt - add initial support for Theobroma A31-yQ7 devboard
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 49089
2016-03-29 11:42:14 +00:00
Luka Perkov
d1aa4bfe1d uboot-mvebu: add package
Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr>
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>

SVN-Revision: 49088
2016-03-25 12:07:03 +00:00
Luka Perkov
35e7bfb906 uboot-envtools: add support for ap120c
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49083
2016-03-23 22:31:41 +00:00
John Crispin
a8bf92457d uboot-zynq: Update to U-Boot 2016.03 release
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49078
2016-03-23 12:52:41 +00:00
John Crispin
99414dbcf1 ramips: Add support for Xiaomi MiWiFi Nano
Xiaomi MiWiFi Nano is based on Mediatek MT7628 with 64MB ram 16MB flash

Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com>

v3  includes changes suggested by L. D. Pinney & Karl Palsson-
Eliminate en25q64 (4MB) flash chip
Alphabetization
Remove hyphen in model
Rename profile from miwifinano.mk to xiaomi.mk
Add gpios that are attached to leds

SVN-Revision: 49024
2016-03-16 09:26:48 +00:00
Luka Perkov
9d0c1f484b uboot-kirkwood/goflexhome: explicit define the size of the last partition
Explicit sets the size of the mtdparts, because the kernel has also an explicit value.
If they have diffent sizes the ubi won't be detected.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49018
2016-03-14 17:06:18 +00:00
Luka Perkov
35c91a2274 uboot-kirkwood/goflexhome: add forgotten include openwrt-kirkwood-common.h"
otherwise the uboot is missing important commands like bootz

Signed-off-by: Martin Mueller <mm@sig21.net>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49017
2016-03-14 17:06:17 +00:00
Luka Perkov
c28e41f0d7 uboot-kirkwood/goflexhome: update bootargs to use new ubi style
Since switching to new ubi(kernel,squashfs,ubifs) layout, the kernel lies in a
ubi volume. Dropping the mtd parts because the mtd layout is saved in the
device-tree, which is appended to the zImage.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49016
2016-03-14 17:06:16 +00:00
Luka Perkov
f533c86d12 uboot/kirkwood: correct mtdparts + cmdline for new ubifs on dockstar
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49012
2016-03-14 17:06:11 +00:00
John Crispin
dac55e665e uboot-oxnas: fix typo leading to tool not being built
Fixes 

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48764
2016-02-25 10:13:53 +00:00
John Crispin
2d45ad07fc zynq: add new target
Add support for Xilinx ZC702 Dev board

Zynq target is using 4.4 kernel and mainline 2016.1 u-boot.

Patch is tested with Xilinx ZC702 Dev board with SD boot mode.

known issues:
 - no QSPI driver in 4.4 kernel: no QSPI flash support
 - USB is not working in 4.4 kernel

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

 create mode 100644 package/boot/uboot-zynq/Makefile
 create mode 100644 target/linux/zynq/Makefile
 create mode 100644 target/linux/zynq/base-files.mk
 create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network
 create mode 100644 target/linux/zynq/base-files/etc/config/network
 create mode 100644 target/linux/zynq/base-files/etc/inittab
 create mode 100644 target/linux/zynq/config-4.4
 create mode 100644 target/linux/zynq/image/Makefile
 create mode 100755 target/linux/zynq/image/mkits.sh
 create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch
 create mode 100644 target/linux/zynq/profiles/zc702.mk

SVN-Revision: 48697
2016-02-12 08:29:24 +00:00
Zoltan Herpai
87b150dc05 packages: uboot-sunxi: fix SATA powerup on Bananapro
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48619
2016-02-02 23:13:29 +00:00
Felix Fietkau
59e3a4714a grub2: switch back to installing to STAGING_DIR_HOST
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48424
2016-01-21 11:46:18 +00:00
Zoltan Herpai
76b903a415 packages: bump uboot-mxs to 2016.01, refresh patches
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48374
2016-01-19 21:50:11 +00:00
Zoltan Herpai
39f385d0d6 packages: bump uboot-sunxi to 2016.01
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48252
2016-01-15 20:27:32 +00:00
Zoltan Herpai
f15fc140f1 packages: bump uboot-sunxi to 2016.01-rc3, along with H3 PSCI/SMP patches
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48154
2016-01-08 20:37:43 +00:00
Luka Perkov
6a661d7fe3 uboot-imx6: add support for i.MX6q SABRE board
U-boot ships with the `mx6qsabresd` configuration file to configure a
bootloader suitable for booting the Freescale i.MX6q SABRE evaluation board
from SD card. Expose this option in the uboot-imx6 Makefile.

Signed-off-by: Keno Fischer <keno@juliacomputing.com>

SVN-Revision: 48014
2015-12-28 04:56:33 +00:00
Zoltan Herpai
0f18228a3a packages: bump uboot-sunxi to enable H3 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 47959
2015-12-22 13:04:31 +00:00
Felix Fietkau
fb1273dfdd ar71xx: PowerCloud CR5000 openwrt configuration
OpenWrt configuration part of support for the PowerCloud Systems
CR5000.  The CR5000 is a dual-band 802.11n wireless router with
8MB flash, 64MB RAM, (unused on stock firmware) USB 2.0 port and
five port gigabit ethernet switch.  The CR5000 was sold as
hardware for the Skydog cloud-managed router service.

    Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47946
2015-12-19 11:28:18 +00:00
Felix Fietkau
59fc337a9a ar71xx: PowerCloud CR3000 OpenWrt configuration
OpenWRt configuration part of support for the PowerCloud
Systems CR3000.  The CR3000 is a 802.11n 2.4 GHz wireless router with
8MB flash, 64MB RAM, a four port gigabit ethernet switch, and a fast
ethernet wan port that was sold by PowerCloud Systems as
hardware for the Skydog cloud-managed router service.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47945
2015-12-19 11:28:12 +00:00
Felix Fietkau
abc1faad0b ar71xx: PowerCloud CAP324 OpenWrt configuration
Openwrt configuration part of support for PowerCloud CAP324
Cloud AP.  The CAP324 Cloud AP is a device sold by PowerCloud Systems
who's stock firmware (CloudCommand) provides 'cloud' based managment
of large numbers access points.

The CAP324 is a dual-band 802.11n wireless access point with 16MB flash
and 128MB RAM and single gigabit ethernet port.  It can be powered via PoE
or a wall wart.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47944
2015-12-19 11:27:59 +00:00