2 Commits

Author	SHA1	Message	Date
John Audia	b506c964a2	kernel: bump 6.6 to 6.6.61 ... Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.61 Manually rebased: bcm27xx/patches-6.6/950-0998-i2c-designware-Add-support-for-bus-clear-feature.patch All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> Link: https://github.com/openwrt/openwrt/pull/16959 (cherry picked from commit 487ca61f91) Link: https://github.com/openwrt/openwrt/pull/17055 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>	2024-11-24 22:46:21 +01:00
Antonio Flores	55c46cbabd	rockchip: add FriendlyElec NanoPi R6C ... Hardware Spec -SoC: Rockchip RK3588S CPU: Quad-core ARM Cortex-A76(up to 2.4GHz) and quad-core Cortex-A55 CPU (up to 1.8GHz) GPU: Mali-G610 MP4, compatible with OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan1.2 VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, 4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 NPU: 6TOPs, supports INT4/INT8/INT16/FP16 -RAM: 64-bit 4GB/8GB LPDDR4X at 2133MHz -Flash: 32GB/None eMMC, at HS400 mode -Ethernet: one Native Gigabit Ethernet, and one PCIe 2.5G Ethernet -USB: one USB 3.0 Type-A and one USB 2.0 Type-A -PCIe: one M.2 Key M connector with PCIe 2.1 x1 -HDMI: compatible with HDMI2.1, HDMI2.0, and HDMI1.4 operation support up to 7680x4320@60Hz Support RGB/YUV(up to 10bit) format -microSD: support up to SDR104 mode -GPIO: 30-pin 2.54mm header connector up to 1x SPI, 3x UARTs, 3x I2Cs, 2x SPDIFs, 1x I2Ss, 3x PWMs, 20x GPIOs -Debug: UART via 3-Pin 2.54mm header, or on-board USB-C to UART -LEDs: 4 x GPIO Controlled LED (SYS, WAN, LAN, LED1) -others: 2 Pin 1.27/1.25mm RTC battery input connector for low power RTC IC HYM8563TS MASK button for eMMC update one user button -Power supply: USB-C, support PD, 5V/9V/12V/20V input -PCB: 8 Layer, 62x90x1.6mm -Ambient Operating Temperature: 0℃ to 70℃ Installation: Uncompress the OpenWrt sysupgrade and write image to the SD card using dd (dd if=*.img of=/*) eMMC Installation: Boot from the SD card Uncompress the OpenWrt sysupgrade image fash to eMMC : dd if=*.img of=/dev/mmcblk1 sync remove SD card reboot Signed-off-by: Antonio Flores <antflores627@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16275 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>	2024-09-22 17:29:00 +02:00