9327 Commits

Author	SHA1	Message	Date
Gabor Juhos	7592057774	ar71xx: add dynamic MDIO clock calculation ... SVN-Revision: 33342	2012-09-09 14:05:17 +00:00
Gabor Juhos	f3ecbea052	adm5120: move common routerboot definitions into a separate header file ... Those will be used on the ar71xx platform as well. SVN-Revision: 33341	2012-09-09 11:55:42 +00:00
Jonas Gorski	7708138183	bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi ... Fixes booting the device with button hotplug enabled (#10785). SVN-Revision: 33340	2012-09-09 11:54:56 +00:00
Gabor Juhos	88a5478781	ar71xx: use the RLE library for RB751 ... SVN-Revision: 33338	2012-09-08 17:51:56 +00:00
Gabor Juhos	73df240bb3	ar71xx: add library code for RLE decoding ... It will be used for the MikroTik boards. SVN-Revision: 33337	2012-09-08 17:51:54 +00:00
Gabor Juhos	f4be8a76de	ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x ... SVN-Revision: 33335	2012-09-08 13:39:09 +00:00
Gabor Juhos	70d00ac64e	ar71xx: refresh kernel patches ... SVN-Revision: 33334	2012-09-08 13:39:04 +00:00
Florian Fainelli	6771d63284	use the recommended ARM I/O accessors ... use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants. SVN-Revision: 33330	2012-09-08 09:51:05 +00:00
Daniel Dickinson	c3b7139ab2	dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware. ... SVN-Revision: 33326	2012-09-06 18:15:26 +00:00
Luka Perkov	4c76b3635b	lantiq: fix sx76x default uci network configuration ... SVN-Revision: 33324	2012-09-06 00:09:46 +00:00
Florian Fainelli	3730e6c794	add some ohci workarounds to make ohci work ... SVN-Revision: 33323	2012-09-05 20:19:29 +00:00
Gabor Juhos	d8b2fef763	ramips: Add missing andmask to ramips_esw register read for recv_good value. ... Add missing andmask to ramips_esw register read for recv_good value. Without the mask, recv_bad leaks into the recv_good packet count. Didn't notice the bug before since you don't usually get bad packets, so I only saw it when I was playing with overlength packets earlier... Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33322	2012-09-05 20:08:43 +00:00
Gabor Juhos	04c6143ca9	ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. ... Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. Daniel Golle found an issue where sometimes (possibly only for RT3352) the default vlan disable method (clearing en_vlan, untag, doubletag and putting all ports into vlan 0) doesn't work and the packets get sent out vlan-tagged with vlan 0. Instead switch to using the doubletagging method (allow doubletagged packets, put all ports into vlan 0 with untag enabled) by default. Unless someone figures out a way to really globally disable vlan for this switch, this seems like the best (most reliable) option. I did some tests regarding maximum packet size and did not see any difference between the two methods, both allow for slightly bigger packets than the ramips_main.c ethernet driver (ping stops going through above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until "ping -s 1490", or about 1532 bytes). Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33321	2012-09-05 20:08:42 +00:00
John Crispin	f186bff0ef	add missing kvm_guest kernel options ... SVN-Revision: 33319	2012-09-05 19:38:42 +00:00
Gabor Juhos	069f544d2b	ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x ... SVN-Revision: 33318	2012-09-05 19:26:50 +00:00
Gabor Juhos	81bb246a8d	ar71xx: add rssileds to package set in profile for devices which got them. ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33317	2012-09-05 19:22:51 +00:00
Gabor Juhos	6c7b776ae0	ramips: add rssileds to package set in profile for devices which got them. ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33316	2012-09-05 19:22:48 +00:00
Florian Fainelli	94a45be66b	enable CFI command set 0002 FORCE_WORD_WRITE ... SVN-Revision: 33315	2012-09-03 20:25:51 +00:00
Florian Fainelli	19cbe80501	pad squashfs image ... SVN-Revision: 33314	2012-09-03 20:25:46 +00:00
Florian Fainelli	1964753c22	add Generic and dLAN USB Extender profiles ... SVN-Revision: 33313	2012-09-03 20:25:40 +00:00
Florian Fainelli	e88e20d975	nuport-mac: disable MAC RX and TX during interface close ... Fixes sporadic crashes while reconfiguring the network interface. SVN-Revision: 33312	2012-09-03 10:26:01 +00:00
Gabor Juhos	11c3392b7f	Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240" ... That was based on assumptions. SVN-Revision: 33310	2012-08-29 10:37:55 +00:00
Gabor Juhos	eb9a97a360	ar71xx: all0315n: fix ethernet according to vendor info ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33309	2012-08-29 10:37:54 +00:00
Gabor Juhos	02cb5f9dcd	ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds ... SVN-Revision: 33308	2012-08-29 10:37:53 +00:00
Gabor Juhos	b0da5b73b8	ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002 ... SVN-Revision: 33307	2012-08-29 10:37:51 +00:00
Gabor Juhos	54d8a55eed	ramips: make built-in switch transparent for ALL0256N and ALL5002 ... This allows them to transparently communicate with an external VLAN switch. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33305	2012-08-29 10:37:47 +00:00
Gabor Juhos	bc4763a399	ramips: Power down phy on disabled switch ports ... Power down phy on disabled switch ports. Haven't measured this myself yet, but according to this http://www.8devices.com/community/viewtopic.php?f=6&t=156 it can save about 300mW of power. [juhosg: fix checkpatch warning] Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33304	2012-08-29 10:37:45 +00:00
Gabor Juhos	1617f226a9	ramips: Add support for 8devices Carambola dev board. ... Add support for 8devices Carambola dev board. The Carambola is a small RT3050-based development board with two ethernet ports, on-board chip antenna, usb and plenty of accessible gpio ports, sold by 8devices. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33303	2012-08-29 10:37:43 +00:00
Gabor Juhos	bb0785880a	ramips: Rename POC registers ... Rename POC registers. The current code uses POC1-POC3. The datasheet uses: POC1: Port Control 0 POC1: Port Control 1 POC2: Port Control 2 So the first POC1 is a typo that should have been POC0, rename the registers to POC0-POC2 accordingly. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33302	2012-08-29 10:37:41 +00:00
Gabor Juhos	f1b9d77912	ramips: Minor ramips_esw.c cleanup ... Stop handling VLAN setup in the kernel. Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for WL-351 and add some extra comments. Also removes the en_vlan per-port flag that isn't very useful really, it now is only controlled by the global enable_vlan flag. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33301	2012-08-29 10:37:40 +00:00
Gabor Juhos	1f3400d3b4	ramips: Add switch setup to uci network defaults ... Add switch setup to uci network defaults. The 'lan' attribute is used to decide into which vlan to put the port. Currently 'disable' is never set, but the intention is to use this for devices like the 8devices Carambola, which only has two ports hooked up to the SoC. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33300	2012-08-29 10:37:38 +00:00
Gabor Juhos	3b17f1deb8	ramips: Add swconfig support to ramips_esw.c ... Add swconfig support to ramips_esw.c This patch adds swconfig support for ramips_esw: Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external rtl8366rb on internal port 5). I've made sure that in the enable_vlan=0 case it behaves like a dumb switch, so external switches should work fine with vlans and verified this on the WL-351. The current state shown by swconfig is always read directly from HW registers, new settings only show after 'swconfig dev rt305x set apply'. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33299	2012-08-29 10:37:36 +00:00
Gabor Juhos	358c7e47f2	ramips: ramips_esw.c indentation cleanup ... Minor indentation cleanup. Prepare for the main swconfig patch by cleaning up indentation a bit. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33298	2012-08-29 10:37:35 +00:00
Gabor Juhos	0c5688cc38	ar71xx: image: fix Profile name for TL-WA701 (closes #12094) ... SVN-Revision: 33295	2012-08-29 10:37:30 +00:00
Gabor Juhos	5fdbb33db4	ar71xx: Buffalo WZR-HP-AG300H LED support ... An improved LED support for Buffalo WZR-HP-AG300H. There will be two new packages to go with this patch (ar922x-led-fix-hotplug and ar922x-led-fix-init). These packages essentially perform the same task of disabling "JTAG over GPIO pins" function which is currently required for LEDs on AR922x emac GPIO to work, and are both considered a temporary fix that circumvent this problem. [juhosg: add the hotplug script from the proposed ar922x-led-fix-hotplug package to ar71xx/base-files] Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 33294	2012-08-29 10:11:55 +00:00
Gabor Juhos	4405faae26	gemini: fix bus ids for PHY devices (closes: #12082) ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33288	2012-08-27 18:09:57 +00:00
Gabor Juhos	f2030c3113	ar71xx: add profile for Allnet devices ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33287	2012-08-27 14:55:38 +00:00
Gabor Juhos	d65c06c15c	ar71xx: generate image for ALL0315N ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33286	2012-08-27 14:55:37 +00:00
Gabor Juhos	4079f3163f	ar71xx: sysupgrade for the ALL0315N ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33285	2012-08-27 14:55:36 +00:00
Gabor Juhos	abffa4ecfb	ar71xx: rename all0258n.sh to allnet.sh ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33284	2012-08-27 14:55:35 +00:00
Gabor Juhos	1d96b0275c	ar71xx: detect ALL0315N board ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33282	2012-08-27 14:55:32 +00:00
Gabor Juhos	eebdd633e4	ar71xx: add support for the Allnet ALL0315N board ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33281	2012-08-27 14:55:31 +00:00
Gabor Juhos	cca873e8e0	ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240 ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33280	2012-08-27 14:55:26 +00:00
Gabor Juhos	fccf1f5105	generic: add support for the EON EN25Q64 SPI flash chip ... It is used in some TL-WDR4310 devices. Closes #12077. SVN-Revision: 33275	2012-08-26 09:27:56 +00:00
Gabor Juhos	5a9c7fda3e	ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N ... Commit 48788063266ad99bdab03b53cbe7e1a564c2d9b3 (r33251) introduced a regression with board= kernel command line parameter incorrectly initialised. The faulty builds propogated to the snapshots download area. This makes the device unbootable and TP-Link users have to attach the serial to recover. Here is the q&d way i used to identify MIPS boards that didn't have a corresponding entry in the image/Makefile: for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \ | sed -n '/MIPS_MACHINE/ { s/^[^"]*"\([^"]*\)".*$/\1/; p; }'`; do grep -q ,$i, Makefile || echo $i; done > missing-boards.new Reported-by: Casper on IRC Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33274	2012-08-26 08:15:11 +00:00
Gabor Juhos	f3d5edffdc	ar71xx: image: fix TL-WR1043ND board id (#12079) ... SVN-Revision: 33272	2012-08-26 06:30:37 +00:00
John Crispin	de3c3d7181	Enable eSATA sheevaplug ... OpenWRT runs in a eSATA sheevaplug like a charm. This patch just enables CONFIG_MACH_ESATA_SHEEVAPLUG so the proper MACHINE_START definition is compiled in. Signed-off-by: Unai Uribarri <unaiur@gmail.com> SVN-Revision: 33266	2012-08-24 06:15:06 +00:00
Gabor Juhos	773b33d7d2	ar71xx: image: group and sort {Single,Multi}Profiles ... SVN-Revision: 33264	2012-08-23 13:17:47 +00:00
Gabor Juhos	a5e0eb0d95	ar71xx: image: group and sort mtdlayout definitions ... SVN-Revision: 33263	2012-08-23 13:14:35 +00:00
Gabor Juhos	f0ad972aba	ar71xx: image: use the MultiProfile helper for the Madwifi profile ... SVN-Revision: 33262	2012-08-23 13:11:25 +00:00
Gabor Juhos	333f030b79	ar71xx: image: automatically build a list of SingleProfiles ... Use that for Default/Minimal profiles. SVN-Revision: 33261	2012-08-23 13:08:15 +00:00
Gabor Juhos	5dce77837f	ar71xx: image: use the new helpers for the ZyXEL images ... SVN-Revision: 33260	2012-08-23 13:05:05 +00:00
Gabor Juhos	be4be2d82a	ar71xx: image: use the new helpers for the Zcomax images ... SVN-Revision: 33259	2012-08-23 13:01:55 +00:00
Gabor Juhos	74bdb68ea4	ar71xx: image: use the new helpers for the WRT400 images ... SVN-Revision: 33258	2012-08-23 12:58:45 +00:00
Gabor Juhos	8cf9a7b1c7	ar71xx: image: use the new helpers for the WZRHPG30XNH images ... SVN-Revision: 33257	2012-08-23 12:55:35 +00:00
Gabor Juhos	c965d8ead8	ar71xx: image: use the new helpers for the WHRHPG300N images ... SVN-Revision: 33256	2012-08-23 12:52:25 +00:00
Gabor Juhos	71af43a7c7	ar71xx: image: use the new helpers for the UBNTXM images ... SVN-Revision: 33255	2012-08-23 12:49:15 +00:00
Gabor Juhos	097e9938b4	ar71xx: image: use the new helpers for the UBNT images ... SVN-Revision: 33254	2012-08-23 12:46:06 +00:00
Gabor Juhos	216e9b7a92	ar71xx: image: use the new helpers for the TPLINKOLD images ... SVN-Revision: 33253	2012-08-23 12:42:56 +00:00
Gabor Juhos	48d6081fa5	ar71xx: image: use the new helpers for the TPLINK-LZMA images ... SVN-Revision: 33252	2012-08-23 12:39:46 +00:00
Gabor Juhos	8546e00157	ar71xx: image: use the new helpers for the TPLINK images ... SVN-Revision: 33251	2012-08-23 12:36:35 +00:00
Gabor Juhos	27feea1070	ar71xx: image: use the new helpers for the Planex images ... SVN-Revision: 33250	2012-08-23 12:33:25 +00:00
Gabor Juhos	4dbabe5c21	ar71xx: image: use the new helpers for the PB4X images ... SVN-Revision: 33249	2012-08-23 12:30:15 +00:00
Gabor Juhos	bbaa0b9200	ar71xx: image: use the new helpers for the OpenMesh images ... SVN-Revision: 33248	2012-08-23 12:27:06 +00:00
Gabor Juhos	4edc55f475	ar71xx: image: use the new helpers for the Netgear images ... SVN-Revision: 33247	2012-08-23 12:23:56 +00:00
Gabor Juhos	d9f933b8b8	ar71xx: image: use the new helpers for the MyLoader images ... SVN-Revision: 33246	2012-08-23 12:20:46 +00:00
Gabor Juhos	a409d0cf46	ar71xx: image: use the new helpers for the DIR825B1 images ... SVN-Revision: 33245	2012-08-23 12:17:36 +00:00
Gabor Juhos	b7e05e3a59	ar71xx: image: use the new helpers for the CyberTAN images ... SVN-Revision: 33244	2012-08-23 12:14:26 +00:00
Gabor Juhos	292f074ad7	ar71xx: image: use the new helpers for the Cameo933x images ... SVN-Revision: 33243	2012-08-23 12:11:17 +00:00
Gabor Juhos	4c9a428614	ar71xx: image: use the new helpers for the Cameo913x images ... SVN-Revision: 33242	2012-08-23 12:08:07 +00:00
Gabor Juhos	19d840980f	ar71xx: image: use the new helpers for the Cameo7240 images ... SVN-Revision: 33241	2012-08-23 12:04:57 +00:00
Gabor Juhos	ce91228e2b	ar71xx: image: use the new helpers for the AthGzip images ... SVN-Revision: 33240	2012-08-23 12:01:47 +00:00
Gabor Juhos	70e3dda99c	ar71xx: image: use the new helpers for the AthLzma images ... SVN-Revision: 33239	2012-08-23 11:58:37 +00:00
Gabor Juhos	31a88650d7	ar71xx: image: use the new helpers for the ALFA images ... SVN-Revision: 33238	2012-08-23 11:55:27 +00:00
Gabor Juhos	2379e6f2a3	ar71xx: image: add a few helper functions ... These functions will be used to simplify the Makefile. SVN-Revision: 33237	2012-08-23 11:52:18 +00:00
Gabor Juhos	6ebc77af73	ar71xx: image: pass mtdlayout as a separate parameter for the ALFA template ... SVN-Revision: 33236	2012-08-23 11:49:07 +00:00
Hauke Mehrtens	847afa343f	update profiles ... * add profile for BCM4705 based SoC using tg3 instead of b44 * remove redundant 105-Atheros.mk * reorder SVN-Revision: 33235	2012-08-22 21:54:06 +00:00
Gabor Juhos	a2f82cf7ec	ar71xx: add profile and build image for the TEW-712BR ... SVN-Revision: 33234	2012-08-22 20:18:44 +00:00
Gabor Juhos	8744f8d183	ar71xx: TEW-712BR user space support ... SVN-Revision: 33232	2012-08-22 20:12:24 +00:00
Gabor Juhos	8b3d95bba9	ar71xx: add support for the TRENDnet TEW-712BR board ... SVN-Revision: 33231	2012-08-22 20:09:13 +00:00
Gabor Juhos	4073317695	ar71xx: fix serial clock calculation on AR933x ... Closes #12031. SVN-Revision: 33230	2012-08-22 19:11:10 +00:00
Gabor Juhos	cebaa557be	ramips: fix board parameter for the NBG-419N (#12061) ... SVN-Revision: 33229	2012-08-22 17:55:12 +00:00
John Crispin	3686b8d279	derive system from hostcc to allow building inside a chroot ... SVN-Revision: 33228	2012-08-22 15:07:32 +00:00
Gabor Juhos	2811d6c183	ar71xx: fix comment style in mach-tl-wr2543n.c ... SVN-Revision: 33227	2012-08-22 12:42:59 +00:00
Gabor Juhos	dc13dc1d54	ar71xx: fix mtd layout of the AP113 ... The 'mtdparts=' prefix and the name of the flash device is missing. SVN-Revision: 33226	2012-08-22 12:39:46 +00:00
Gabor Juhos	eb54a05e89	ramips: add profile for Allnet devices ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33225	2012-08-22 12:36:35 +00:00
Gabor Juhos	5a694e09c8	ar71xx: add ALL0305 board alias ... For the pure convenience of having a correctly named image and system name in /proc/cpuinfo , until we can do that by having system names in DTS... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33224	2012-08-22 12:33:22 +00:00
Gabor Juhos	d77418d67e	ramips: add RSSI leds for uci-defaults for ALL0256N ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33220	2012-08-22 09:46:30 +00:00
Gabor Juhos	0517183b9c	ar71xx: add support for TP-Link TL-WDR3600 ... The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has only two antennas. [juhosg: remove the custom machine type, change the board name instead] Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 33219	2012-08-22 09:43:18 +00:00
John Crispin	6c9d20d6e7	tools/firmware-utils/ptgen option to use MB rounding ... SVN-Revision: 33218	2012-08-22 09:22:38 +00:00
John Crispin	968ac3fd03	add led defintion for the WR2543 5GHz WLAN LED ... Signed-off-by: Andy Leiserson <andy@leiserson.org> SVN-Revision: 33215	2012-08-22 09:10:24 +00:00
Hauke Mehrtens	3133d4d8de	remove unused file ... SVN-Revision: 33210	2012-08-18 15:45:18 +00:00
Hauke Mehrtens	9eaee85cc2	make brcm47xx build only with bcma or only with ssb support. ... There are some ifdefs missing so when only ssb or only bcma was selected in the kernel config it did not build. SVN-Revision: 33209	2012-08-18 14:08:35 +00:00
Hauke Mehrtens	f4d6baf498	update gpio patches ... SVN-Revision: 33208	2012-08-18 11:51:35 +00:00
Gabor Juhos	67e6461ad7	ramips: add board alias for the ALL0239-3G ... Generate image for the ALL0239-3G which can be flashed through the chipset-vendor SDK based firmware's web-interface and bootloader. The bootloader seems to ignore uImage checksum errors, but does complain about them once the 0xDEADC0DE was replaced by an actual JFFS2 page. I'm working on implementing fixtrx for uImage in the mtd package to solve this. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33206	2012-08-17 17:56:07 +00:00
Gabor Juhos	89606b61b1	ramips: add support for D-Link DIR-615 H1 ... rt2x00 still needs some patching as the radio doesn't come to life. Installation via webflash. [juhosg: fix whitespace issues, remove rt305x_register_usb from machine setup because the board has no USB port] Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi> SVN-Revision: 33205	2012-08-17 17:56:05 +00:00
Gabor Juhos	182a18a369	ar71xx: setup WLAN LED for the TL-WA901ND v2 ... Closes #11889. SVN-Revision: 33202	2012-08-16 07:11:30 +00:00
Jo-Philipp Wich	a062e08bb4	use bundle-libraries.sh to install required host utilities into imagebuilder staging tree ... SVN-Revision: 33196	2012-08-15 13:28:26 +00:00
Gabor Juhos	5d84dabf0f	generic: extend pci_isable_usb_common_quirks patch ... Fixes the following build error: SYSMAP System.map Building modules, stage 2. MODPOST 48 modules ERROR: "usb_enable_xhci_ports" [drivers/usb/host/ehci-hcd.ko] undefined! ERROR: "usb_is_intel_switchable_xhci" [drivers/usb/host/ehci-hcd.ko] undefined! make[6]: *** [__modpost] Error 1 make[5]: *** [modules] Error 2 SVN-Revision: 33193	2012-08-15 13:26:51 +00:00
John Crispin	76954dc8b0	set xen images to gzip compression, fixes #11970 ... SVN-Revision: 33192	2012-08-15 09:20:12 +00:00
Florian Fainelli	a183ced08e	MCS8140 actually selects CPU_ARM926T ... Should make inclusion for other MCS814x SoCs easier SVN-Revision: 33188	2012-08-14 16:19:30 +00:00
John Crispin	5f8ffb8873	fixes gpio_dev un/reload balancing ... Signed-off-by: SHI Bin <shibin@ctsing.com> SVN-Revision: 33183	2012-08-14 12:32:11 +00:00
Florian Fainelli	25792cb971	generic: enhanced image Makefile ... * Creation of uImage for WNR854T only done once (before 2x for jffs2 build and 1x for squashfs build) * Got rid of unneccessary padding of rootfs partition * ARM zImages always need a machine id, therefore do not copy generic (=no id) uImage to BIN_DIR, instead copy zImage * Generalized functions for easier re-using and enhancing (e.g. D-Link DNS 323 implementation would be only a couple lines) * Copy rootfs partitions to BIN_DIR, just like it is done for D-Link DNS 323 * Use variables to allows easily changing for custom builds, e.g. kernel mtd size for symbols * Size check of kernel files to avoid builds that break devices * Use for "-sysupgrade" and "-factory" in image names (like ar71xx, brcm63xx, etc.) to avoid questions about which image to use Signed-off by: Matthias Buecher <mail@maddes.net> SVN-Revision: 33174	2012-08-13 14:46:47 +00:00
Gabor Juhos	5fc4b7f5fd	ar71xx: uci-defaults/leds for ALL0258N ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33165	2012-08-13 14:01:38 +00:00
Florian Fainelli	f164b71189	leds: do not register device if no leds defined ... Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com> SVN-Revision: 33158	2012-08-13 09:55:10 +00:00
Florian Fainelli	f0f10014a0	BCM6358 fix enet MII clk definitions ... Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com> SVN-Revision: 33157	2012-08-13 09:55:07 +00:00
Florian Fainelli	9b91c62917	nb4: fix support, add support for SVC and CLIP BTN ... Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com> SVN-Revision: 33156	2012-08-13 09:55:04 +00:00
Gabor Juhos	82759a1716	ramips: rename rt3352 usb platform devices ... In order to get OHCI/EHCI working on the Rt3352, the platform device must be named so rt3883-?hci will recognize it. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33145	2012-08-12 12:48:31 +00:00
Gabor Juhos	1525620b0e	ramips: watchdog: use maximum possible timeout by default ... As the userspace has no means to determine the maximum possible timeout, use that as the default and let the userspace lower it when necessary. As the result the usual OpenWrt install (with busybox's watchdog trying to set the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at 384MHz instead of the current 20s default. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33144	2012-08-12 12:48:28 +00:00
Gabor Juhos	615a619bc7	ramips: provide means to specify custom "image name" for uImages, use for DIR-620 ... D-Link's DIR-620 allows to flash a uImage directly from its web-interface but for that the image name should be set to DIR_620. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33143	2012-08-12 12:48:26 +00:00
Gabor Juhos	9365113040	ramips: add D-Link DIR-620 A1 support ... Full functionality runtime tested, installation via OEM web-interface requires a follow-up patch. Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing bits (including the antiparallel wps led). Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33142	2012-08-12 12:48:24 +00:00
Gabor Juhos	b942309f4f	generic: use __meminit annotation for crashlog_init_memblock ... Fixes this section mismatch warning: WARNING: vmlinux.o(.meminit.text+0xb14): Section mismatch in reference from the function memblock_insert_region() to the function .init.text:crashlog_init_memblock() The function __meminit memblock_insert_region() references a function __init crashlog_init_memblock(). If crashlog_init_memblock is only used by memblock_insert_region then annotate crashlog_init_memblock with a matching annotation. Also, remove the __init annotations from 'include/linux/crashlog.h' SVN-Revision: 33137	2012-08-12 10:30:41 +00:00
Florian Fainelli	2cf28cff7d	only support 128KiB erase block sizes ... SVN-Revision: 33131	2012-08-11 12:56:09 +00:00
Florian Fainelli	035b41bafb	disable PCI support ... None of the boards we support have PCI connectors SVN-Revision: 33130	2012-08-11 12:56:00 +00:00
Florian Fainelli	639112f0d5	strip a bit more the kernel config ... SVN-Revision: 33129	2012-08-11 12:55:51 +00:00
Florian Fainelli	0f91df4de6	properly advertise OHCI and EHCI capabilities ... SVN-Revision: 33128	2012-08-11 12:55:41 +00:00
Florian Fainelli	43ddb1d7af	change partition names to be more in line with other OpenWrt devices ... SVN-Revision: 33127	2012-08-11 12:55:30 +00:00
Florian Fainelli	911a83dffc	generate upgrade files suffixed with filesystem type ... SVN-Revision: 33126	2012-08-11 12:55:15 +00:00
Florian Fainelli	c16bf519f1	nuport-mac: delay call to napi_start() until fully able to process RX ... SVN-Revision: 33079	2012-08-10 07:04:21 +00:00
Florian Fainelli	0028429dfa	set a compatible command-line to boot from flash ... SVN-Revision: 33078	2012-08-10 07:04:16 +00:00
Gabor Juhos	5dd996bc2a	generic: rtl8366_smi: increase delay after switch hw reset ... SVN-Revision: 33077	2012-08-10 06:32:00 +00:00
Jo-Philipp Wich	c8a0166212	Fix hard reset of alix/soekris hardware under heavy NIC load ... The following patch corrects a hard reset that occurs on alix and soekris net5501 hardware. Specifically, this is an issue with the via rhine NIC driver. Under periods of extreme load, the via rhine driver can cause a reset of the entire system. When this happens no output is seen on the console, the device simply reboots. This was reported in the following ticket: Consistent crash on Soekris NET5501 https://dev.openwrt.org/ticket/11882 I was able to reproduce the problem locally with numerous alix 2d13 platforms. Under heavy 64 byte frame size load from a Smartbits traffic generator, the alix hardware will hard reset in under 5 minutes. The same hardware, under the same load, on FreeBSD 9.0 does not reset. The patch below backports most of the via rhine changes from kernel 3.5. With OpenWrt trunk being on kernel 3.3.8, it seemed prudent to bring these changes in to avoid this serious issue. I've tested this heavily in my test environment and was able to keep the device stable under load for extended periods of time without any resets. Also, a nice side effect of this change is that it significantly raises the performance the platform. Without this patch the alix 2d13 can move approximately 29,000 packets per second at 64 byte frame sizes. After this patch the alix can move 52,000 packets per second at 64 byte frame sizes. I put this patch under the x86 patches as those are the only platforms with via rhine hardware that I'm aware of. If it needs to go some place else please let me know. Thanks, Adam Signed-off-by: Adam Gensler <openwrt@kristenandadam.net> SVN-Revision: 33072	2012-08-09 09:41:22 +00:00
Florian Fainelli	47380a4388	nuport-mac: use dma_mapping_error() instead of checking pointers ... Thanks Gabor for spotting this SVN-Revision: 33071	2012-08-09 09:06:35 +00:00
Florian Fainelli	7f9bfa3fcd	nuport-mac: rework PHY interrupt configuration to avoid races ... SVN-Revision: 33070	2012-08-08 21:51:18 +00:00
Florian Fainelli	5e877f02b4	nuport-mac: close possible race condition during start ... SVN-Revision: 33069	2012-08-08 21:51:13 +00:00
Florian Fainelli	35351a28b9	nuport-mac: unmap the DMA buffer when closing device ... SVN-Revision: 33068	2012-08-08 21:51:09 +00:00
Florian Fainelli	b77494fa2f	nuport-mac: check dma_map_single address return values ... SVN-Revision: 33067	2012-08-08 21:51:04 +00:00
Florian Fainelli	798cc28d73	build a Devolo dLAN USB Extender specific image ... The kernel has to be rounded up to the nearest 1MB, then we append the root filesystem at its end. SVN-Revision: 33066	2012-08-08 21:51:00 +00:00
Florian Fainelli	f8386ecbc6	cleanup image generation ... SVN-Revision: 33065	2012-08-08 21:50:55 +00:00
John Crispin	64b385dda7	pci gpio mapping ... This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 33054	2012-08-08 12:14:43 +00:00
Jonas Gorski	4feeda756e	bcm63xx: fix USB base registers and IRQs for BCM6328 ... SVN-Revision: 33005	2012-08-05 23:18:22 +00:00
Hauke Mehrtens	a0fb060211	update tg3 driver ... SVN-Revision: 33004	2012-08-05 20:27:40 +00:00
Hauke Mehrtens	35661401da	generate image for Linksys e3200 ... SVN-Revision: 33003	2012-08-05 13:14:00 +00:00
Hauke Mehrtens	a71f347c30	brcm47xx: update gpio patch ... SVN-Revision: 33001	2012-08-05 12:40:05 +00:00
Hauke Mehrtens	1d40a652ee	brcm47xx: fix patch which moves the flash struct in wgt634u code ... SVN-Revision: 33000	2012-08-05 12:39:15 +00:00
John Crispin	5f438c3565	W502V/ARV4525 wireless mac bugfix ... The ARV4525 board init is passing the wrong offset to arv_register_ath5k() resulting in a bogus mac. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 32993	2012-08-04 20:14:52 +00:00
Hauke Mehrtens	0758996824	brcm47xx: use libgpio instaed of implementing the gpio interface ourself. ... SVN-Revision: 32992	2012-08-04 19:46:25 +00:00
John Crispin	060b161ca6	cleanup patches ... SVN-Revision: 32953	2012-08-03 08:53:02 +00:00
Florian Fainelli	162e272b4b	nuport-mac: properly protect the phy interrupt handler ... SVN-Revision: 32951	2012-08-02 18:13:17 +00:00
John Crispin	f45132d1d4	Codel: avoid a nul rec_inv_sqrt ... One condition before codel_Newton_step() was not good if we never left the dropping state for a flow. As a result rec_inv_sqrt was 0, instead of the ~0 initial value. codel control law was then set to a very aggressive mode, dropping many packets before reaching 'target' and recovering from this problem. Brought over from 3.5-stable Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> SVN-Revision: 32950	2012-08-02 13:39:50 +00:00
John Crispin	c2d3274ffc	fixes i2c clock enable ... SVN-Revision: 32949	2012-08-02 13:29:49 +00:00
Gabor Juhos	e320a7e649	ar71xx: simplify misc IRQ handling ... SVN-Revision: 32948	2012-08-02 11:25:49 +00:00
Gabor Juhos	3e1e52a524	ar71xx: fix AR934X_EHCI_SIZE ... SVN-Revision: 32947	2012-08-02 11:25:46 +00:00
Gabor Juhos	b873051706	ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND ... SVN-Revision: 32946	2012-08-02 09:54:41 +00:00
Gabor Juhos	e29d6bec6f	ar71xx: image: allow to use board specific code in the lzma-loader ... SVN-Revision: 32945	2012-08-02 09:54:33 +00:00
Gabor Juhos	79a8660d67	ar71xx: init switch hw_reset on the TL-WR1043ND board ... SVN-Revision: 32944	2012-08-02 09:54:28 +00:00
Gabor Juhos	e2782eae8e	generic: rtl836x: add hw_reset field to struct rtl8366_smi ... It will be used to start/stop the switch if that is supported by the given board. SVN-Revision: 32943	2012-08-02 09:54:21 +00:00
Gabor Juhos	614ca3cc9e	generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls ... SVN-Revision: 32942	2012-08-02 09:54:13 +00:00
Florian Fainelli	9f011e7225	add missing netmask to the network config ... SVN-Revision: 32941	2012-08-01 22:09:13 +00:00
Florian Fainelli	5133a44785	assume the link is up and full-duplex by default ... SVN-Revision: 32940	2012-08-01 21:56:54 +00:00
Florian Fainelli	56aac45139	add a default and suitable network config file ... SVN-Revision: 32939	2012-08-01 21:56:49 +00:00
Gabor Juhos	563400ef10	ar71xx: ew-dorin: added router firmware generation ... [juhosg: remove dead code] Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de> SVN-Revision: 32934	2012-08-01 12:24:57 +00:00
Gabor Juhos	8eabe64e6b	ar71xx: ew-dorin: added USB support ... Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de> SVN-Revision: 32933	2012-08-01 12:24:56 +00:00
Gabor Juhos	1af4fd7660	ar71xx: Buffalo WLAE-AG300N wireless led patch ... Here is the uci-defaults version of the led support for the Buffalo WLAE-AG300N. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 32932	2012-08-01 12:24:54 +00:00
Gabor Juhos	010aec0619	ar71xx: Buffalo WLAE-AG300N initial support ... The patch set for Buffalo WLAE-AG300N initial support. There is another patch for wireless led support that is posted separately. Note on serial console: This unit has buffalo standard 4 pin console, but the unit may not power on if some console apparatus is connected. This is probably due to some electronic interaction between the unit's electronic power switch circuit and the serial console apparatus. If this happens, it is required to power on the unit without the console, then quickly (re-)attach it. [juhosg: fix coding style] Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 32931	2012-08-01 12:24:52 +00:00
Florian Fainelli	df48d71d72	resync defconfig enable XZ compression ... SVN-Revision: 32930	2012-08-01 12:01:27 +00:00
Florian Fainelli	3cd753408d	properly generate squashfs, jffs2 and initramfs images and kernels ... SVN-Revision: 32927	2012-07-31 23:09:50 +00:00
Florian Fainelli	c0561a42e7	disable crashlog on ARM platforms for the moment ... It is currently badly broken on ARM, until fixed, disable it SVN-Revision: 32926	2012-07-31 23:09:46 +00:00
John Crispin	f5f36911f0	add lantiq svip support ... SVN-Revision: 32925	2012-07-31 18:49:54 +00:00
Jonas Gorski	07c4524d33	bcm63xx: Add nb6 support (BCM6362 SoC base boards) ... Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com> Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> [jonas.gorski@gmail.com: add network config for nb6, make switch fix a platform patch] SVN-Revision: 32924	2012-07-31 14:27:47 +00:00
Jonas Gorski	820c224029	bcm63xx: add basic bcm6362 support ... Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 32923	2012-07-31 14:27:42 +00:00
Jonas Gorski	dcd339ac9d	bcm63xx: enable usb for bcm6328 ... Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 32922	2012-07-31 14:27:34 +00:00
Jonas Gorski	94d257a851	bcm63xx: update enetswitch driver ... Update enetswith driver with latest fixes and additions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 32921	2012-07-31 14:27:31 +00:00
Jonas Gorski	fa75bd977a	bcm63xx: reorder patches ... Fix the order and names of patches. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 32920	2012-07-31 14:27:25 +00:00
Florian Fainelli	d1ab4df0d6	move i2c module to target modules.mk ... SVN-Revision: 32910	2012-07-29 13:20:51 +00:00
Florian Fainelli	a5738c960a	resync config ... SVN-Revision: 32908	2012-07-29 13:20:39 +00:00
Florian Fainelli	17244dea00	use the same description as other omap platforms (without the dash) ... SVN-Revision: 32907	2012-07-29 13:20:35 +00:00
John Crispin	ee0946a5f4	refresh pwm patch ... SVN-Revision: 32905	2012-07-29 11:53:06 +00:00
John Crispin	101766fb00	clean up pwm patches and drivers ... SVN-Revision: 32901	2012-07-28 20:47:08 +00:00
Hauke Mehrtens	f0fe59648a	add config option CONFIG_I2C_MV64XXX to fix kirkwood build ... SVN-Revision: 32898	2012-07-28 11:36:52 +00:00
Florian Fainelli	67891c26ec	resync config ... SVN-Revision: 32895	2012-07-27 15:35:15 +00:00
Florian Fainelli	a4d699ccf0	fix DVA-G3810BN image generation ... Attached patch fixes a typo in the image Makefile, and overrides the board name for DVA-G3810BN to set the correct board properties Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl> SVN-Revision: 32894	2012-07-27 15:35:12 +00:00
Florian Fainelli	c6813d33f3	add D-link DVA-G3810BN-TL-1 support ... Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl> SVN-Revision: 32893	2012-07-27 15:35:09 +00:00
Florian Fainelli	18206793b2	Add CT6376-1 board support ... Added CT6373 devices instead of using NB4's devices, as Florian suggested. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 32892	2012-07-27 15:35:05 +00:00
Florian Fainelli	4acdbb1d87	Add brcmsmac profile ... Add brcmsmac profile (kmod-brcmsmac + wpad-mini). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 32890	2012-07-27 15:34:57 +00:00
John Crispin	0ba7b18cfd	Add leds back after migration to sysfs ... atheros trunk moved to full sysfs gpiolib, but the leds were forgotten. This restores the wlan led that was missing after switching from backfire to trunk. Signed-off-by: Karl Palsson <karlp@remake.is> SVN-Revision: 32885	2012-07-26 17:06:55 +00:00
Florian Fainelli	46611b2cbf	add more missing config symbols ... SVN-Revision: 32884	2012-07-26 17:03:08 +00:00
Florian Fainelli	ac30beaaa7	add more USB-related config symbols ... SVN-Revision: 32883	2012-07-26 17:03:05 +00:00
Florian Fainelli	a077e785cf	make sure target modules depend on the target ... SVN-Revision: 32882	2012-07-26 17:03:02 +00:00
Hauke Mehrtens	0c75abf527	bcma: update to version from wireless-testing tag master-2012-07-16 ... I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it. This also contains 3 additional patches fixing some bugs in bcma. SVN-Revision: 32880	2012-07-26 15:42:18 +00:00
John Crispin	87a72d68f1	fix typo in modules.mk ... This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR. Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru> SVN-Revision: 32870	2012-07-25 19:52:30 +00:00
Florian Fainelli	d359d46182	make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly ... SVN-Revision: 32869	2012-07-25 19:36:19 +00:00
Florian Fainelli	adc2b21be8	move isp116x driver to target specific modules.mk ... SVN-Revision: 32865	2012-07-25 15:50:45 +00:00
Florian Fainelli	1627b2bb4b	move rt305x-dwc driver to target specific modules.mk ... SVN-Revision: 32864	2012-07-25 15:50:42 +00:00
Florian Fainelli	c7a69869f7	move ubsec-ssb driver to target specific modules.mk ... SVN-Revision: 32863	2012-07-25 15:50:38 +00:00
Florian Fainelli	d1b2087a35	move ssb-gige to target specific modules.mk ... SVN-Revision: 32862	2012-07-25 15:50:36 +00:00
Florian Fainelli	c14d907b8b	move usb driver to target specific modules.mk ... SVN-Revision: 32861	2012-07-25 15:50:33 +00:00
Florian Fainelli	3b5a8548f4	move mmc driver to target specific modules.mk ... SVN-Revision: 32859	2012-07-25 15:50:26 +00:00
Florian Fainelli	18038c803c	move ixp4xx-eth to target specific modules.mk ... SVN-Revision: 32858	2012-07-25 15:50:23 +00:00
Florian Fainelli	4000de357e	move crypto module to target specific modules.mk ... SVN-Revision: 32856	2012-07-25 15:50:16 +00:00
Florian Fainelli	a282e37c09	move i2c driver to target modules.mk ... SVN-Revision: 32855	2012-07-25 15:50:13 +00:00
Florian Fainelli	accbc20045	move watchdog driver to target specific modules.mk ... SVN-Revision: 32854	2012-07-25 15:50:10 +00:00
Florian Fainelli	23ffbad602	move target specific spi modules ... SVN-Revision: 32853	2012-07-25 15:50:04 +00:00
Florian Fainelli	1859500829	move target specific leds modules to ar71xx modules.mk ... SVN-Revision: 32852	2012-07-25 15:50:02 +00:00
Florian Fainelli	c3b9a987b7	move leds modules back to target modules.mk ... SVN-Revision: 32851	2012-07-25 15:49:57 +00:00
Florian Fainelli	bca45d6d8a	move i2c modules back to target modules.mk ... SVN-Revision: 32850	2012-07-25 15:49:54 +00:00
Florian Fainelli	2bfb2a797c	move more x86-specific modules back to target modules.mk ... SVN-Revision: 32848	2012-07-25 15:49:49 +00:00
Florian Fainelli	d973768580	move x86 specific ide/pata modules to x86' modules.mk ... SVN-Revision: 32846	2012-07-25 15:49:42 +00:00
Hauke Mehrtens	e0837a51f0	brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first. ... SVN-Revision: 32845	2012-07-25 14:52:00 +00:00
Florian Fainelli	ab2cb9ce61	add yet another framebuffer symbol ... SVN-Revision: 32844	2012-07-25 14:01:57 +00:00
Florian Fainelli	89a312bf48	split framebuffer helper modules to their own packages ... SVN-Revision: 32843	2012-07-25 14:01:54 +00:00
Florian Fainelli	ba9f6a46b1	remove broken flag ... SVN-Revision: 32842	2012-07-25 14:01:51 +00:00
Florian Fainelli	03c06178e3	package buttons driver separately ... SVN-Revision: 32841	2012-07-25 14:01:49 +00:00
Florian Fainelli	83b7462ac9	package cobalt lcd as a module ... SVN-Revision: 32840	2012-07-25 14:01:46 +00:00
John Crispin	7ee4798be2	add unset CONFIG_FB_XGI to fix fullbuilds ... SVN-Revision: 32836	2012-07-25 09:05:23 +00:00
John Crispin	94a550cc87	cleanup config-3.3, remove =m ... SVN-Revision: 32835	2012-07-25 09:05:18 +00:00
John Crispin	1cbfa0c0f5	laguna: fix eeprom read buffer size during platform configuration ... Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna. The model name read in is 16 bytes but the original buffer was only 8 bytes. Signed-off-by: David Acker <dacker@rajant.com> SVN-Revision: 32833	2012-07-25 08:01:38 +00:00
John Crispin	0e9e7dcd10	adds target used by rapsberry pi ... Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825	2012-07-24 20:39:17 +00:00
John Crispin	5e52619b76	DWC otg usb: compilation fixes and trivial bugfix in slave mode ... Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru> SVN-Revision: 32823	2012-07-24 20:38:55 +00:00
John Crispin	799d6deab0	D-Link DAP-1350 initial support ... The initial support for the D-Link DAP-1350. USB related functionality is not tested. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 32821	2012-07-24 20:38:43 +00:00
John Crispin	b891eec700	MI424WR - add rev D support ... Add support for revision D of the MI424WR. Rev D swaps LAN & WAN ports so this patch maintains eth0 for LAN and eth1 for WAN. For details on rev D usage, see http://wiki.openwrt.org/toh/actiontec/mi424wr Signed-off-by: Jose Vasconcellos <jvasco@verizon.net> SVN-Revision: 32820	2012-07-24 20:38:36 +00:00
John Crispin	03be8d08ac	initial LED configuration for Fonera 2.0n ... Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips) Signed-off-by: Malte Forkel <malte.forkel@berlin.de> SVN-Revision: 32819	2012-07-24 20:38:31 +00:00
John Crispin	2d2479a033	add ALL5002 userspace support ... detect EEPROM, MAC addresses and support sysupgrade for the ALL5002 Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32816	2012-07-24 20:38:14 +00:00
John Crispin	e219c3ac3a	enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F. ... Hope that this works, didn't have a chance to actually test it... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32815	2012-07-24 20:38:08 +00:00
John Crispin	a65eee9ac3	add image build for ALL5002 ... add image build for ALL5002 Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32814	2012-07-24 20:38:03 +00:00
John Crispin	0a08a776fb	add support for Allnet ALL5002 to kernel ... support ALL5002 in ramips/rt305x branch of the kernel. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32813	2012-07-24 20:37:56 +00:00
John Crispin	6641024f50	uart_clk on Rt3352F is always 40MHz ... Currently, sys_clk/10 is used which is just wrong. cpu_clk/10 would work for systems with 400MHz CPU clock. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32812	2012-07-24 20:37:50 +00:00
Florian Fainelli	93dc8c8d1b	move omap specific modules to modules.mk ... SVN-Revision: 32810	2012-07-24 19:43:54 +00:00
Florian Fainelli	82c7e05d42	move n810 battery module to omap24 modules.mk ... SVN-Revision: 32809	2012-07-24 19:43:49 +00:00
Florian Fainelli	25e20b0b57	move target specific modules to target's module.mk ... SVN-Revision: 32808	2012-07-24 19:43:45 +00:00
Florian Fainelli	587f85ac20	package ep93xx framebuffer ... SVN-Revision: 32807	2012-07-24 19:43:35 +00:00
Florian Fainelli	5915c85d80	remove crypto symbols override ... SVN-Revision: 32806	2012-07-24 19:43:31 +00:00
Florian Fainelli	c238862651	add missing framebuffer related symbols ... SVN-Revision: 32804	2012-07-24 19:43:23 +00:00
Florian Fainelli	9f55e6f954	remove broken flag, since it works ... SVN-Revision: 32803	2012-07-24 19:43:19 +00:00
Florian Fainelli	c531ce0301	fix sound modules loading order and dependencies ... SVN-Revision: 32802	2012-07-24 19:43:15 +00:00
Florian Fainelli	598ef2a2e0	package ep93xx touchscreen driver as a module ... SVN-Revision: 32799	2012-07-24 19:42:49 +00:00
Florian Fainelli	0db5f35846	set DEVICE_TYPE to developerboard ... SVN-Revision: 32798	2012-07-24 19:42:44 +00:00
John Crispin	5178c177dc	rebase config-3.3 ... SVN-Revision: 32797	2012-07-24 17:28:25 +00:00
John Crispin	53a6946bb4	fix tantos patch properly ... SVN-Revision: 32796	2012-07-24 17:28:12 +00:00
John Crispin	6fe32d72a2	make tantos switch select ETHERNET_PACKET_MANGLE ... SVN-Revision: 32795	2012-07-24 16:50:14 +00:00
John Crispin	48869ef7c0	move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file ... This broke falcon builds SVN-Revision: 32794	2012-07-24 15:33:01 +00:00
Felix Fietkau	b59bc92c6e	crashlog: fix dependency, add memblock support ... SVN-Revision: 32787	2012-07-22 16:39:33 +00:00
Felix Fietkau	b1f318de53	kernel: fix portability issues on the x86 specific relocs host tool, fixes build on mac os x ... SVN-Revision: 32783	2012-07-20 12:28:50 +00:00
Florian Fainelli	05340cc602	rename upgrade image to sysupgrade.bin for consistency ... SVN-Revision: 32770	2012-07-17 16:47:57 +00:00
Florian Fainelli	d243c1e1f2	add missing configuration symbols ... SVN-Revision: 32769	2012-07-17 16:40:28 +00:00
Florian Fainelli	f7dfd20f97	au1000: implement sysupgrade platform.sh ... Signed-off-by: Bruno Randolf <br1@einfach.org> SVN-Revision: 32768	2012-07-17 16:40:24 +00:00
Florian Fainelli	ac6bf6d62f	au1000: clean up profiles ... Signed-off-by: Bruno Randolf <br1@einfach.org> SVN-Revision: 32767	2012-07-17 16:39:52 +00:00
Florian Fainelli	b2d76e1e05	au1000: fix InternetBox idsel and remove broken flag ... The following patch is necessary for the InternetBox (Surfbox) board-specific idsel to work with newer kernels. Acutally I don't exactly understand why this was not necessary before, but without the udelay, the MiniPCI adapter in slot 3 is not detected and set up correctly. Also remove platform broken flag, it works. Signed-off-by: Bruno Randolf <br1@einfach.org> SVN-Revision: 32766	2012-07-17 16:39:47 +00:00
Gabor Juhos	21de1b9d85	ar71xx: enable I2C_GPIO, the PB44 board needs that ... SVN-Revision: 32738	2012-07-15 17:52:52 +00:00
Gabor Juhos	7daf851adf	ar71xx: fix PB44 board detection ... SVN-Revision: 32737	2012-07-15 17:52:50 +00:00
Gabor Juhos	c7fa38484c	ar71xx: use gpio_set_value_cansleep on sleeping GPIOs in ath79_spi ... SVN-Revision: 32736	2012-07-15 17:52:48 +00:00
Luka Perkov	03a6d65c37	kernel: add Marvell SoC built-in RTC to modules ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32732	2012-07-15 14:25:30 +00:00
Florian Fainelli	c727c2aacf	set DEVICE_TYPE to other to avoid pulling unecessary packages ... SVN-Revision: 32731	2012-07-15 14:10:03 +00:00
Florian Fainelli	a5d72815b5	add compatible property to pci node ... SVN-Revision: 32730	2012-07-15 14:09:40 +00:00
Florian Fainelli	b5578d83d5	use ohci_err() instead of err() ... SVN-Revision: 32729	2012-07-15 14:09:32 +00:00
Florian Fainelli	0e0b396663	make sure we properly unmap DMA mappings we created ... SVN-Revision: 32728	2012-07-15 14:09:24 +00:00
Florian Fainelli	0f0e42f28e	nuport-mac: add definitions of the various bits/masks used ... SVN-Revision: 32727	2012-07-15 14:09:18 +00:00
Luka Perkov	c89e87d186	kirkwood: add support for seagate goflexnet and goflexhome ... Signed-off-by: Martin Mueller <mm@sig21.net> SVN-Revision: 32725	2012-07-15 12:18:29 +00:00
Luka Perkov	952ce3473d	kirkwood: revert config changes from r32053 ... SVN-Revision: 32719	2012-07-15 00:08:52 +00:00
Gabor Juhos	33220828dc	ar71xx: build firmware image for the TP-Link TL-WDR4310 v1.0 ... The hardware for TP-Link TL-WDR4300 v1.1 and TL-WDR4310 v1.0 is identical, but requires different firmware headers: TL-WDR4300: 00000040 43 00 00 01 00 00 00 01 00 00 00 00 76 fb 83 40 |C...........v..@| TL-WDR4310: 00000040 43 10 00 01 00 00 00 01 00 00 00 00 38 2b 50 6c |C...........8+Pl| [juhosg: change commit message, use a different model name] Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> SVN-Revision: 32683	2012-07-12 13:38:40 +00:00
Gabor Juhos	372945185d	ramips: rt305x: add support for Edimax 3G-6200N ... Support for Edimax 3G-6200N router with USB. Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com> SVN-Revision: 32682	2012-07-12 13:29:46 +00:00
Gabor Juhos	e9af340016	generic: ocf: restore terminating entry of pci_id_table in hifnHIPP ... SVN-Revision: 32680	2012-07-12 08:34:23 +00:00
Gabor Juhos	d3c8852fd1	ar71xx: select ATH79_DEV_M25P80 for the WRT400N board ... SVN-Revision: 32679	2012-07-12 08:34:22 +00:00
Gabor Juhos	c75c895d24	ar71xx: airrouter power led support ... This patch adds support for power led to Unifi Airrouter AP. [juhosg:fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch] Signed-off-by: Rocco Folino <lordzen@autistici.org> SVN-Revision: 32678	2012-07-12 08:34:21 +00:00
Gabor Juhos	466f010303	ar71xx: unifi reset button support ... This patch adds support for reset button to Ubiquiti UniFi AP. [juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch] Signed-off-by: Rocco Folino <lordzen@autistici.org> SVN-Revision: 32677	2012-07-12 08:34:20 +00:00
Gabor Juhos	5ce9c90ca8	ar71xx: airrouter reset button support ... This patch adds support for reset button to Ubiquiti Airrouter AP. [juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch] Signed-off-by: Rocco Folino <lordzen@autistici.org> SVN-Revision: 32676	2012-07-12 08:34:18 +00:00
Luka Perkov	283021ac15	ocf: update to version 20120127 ... SVN-Revision: 32672	2012-07-11 23:38:14 +00:00
Hauke Mehrtens	45d55161a6	kernel: bcma: update to version from wireless-testing tag master-2012-07-11 ... SVN-Revision: 32670	2012-07-11 22:17:05 +00:00
Florian Fainelli	b94d9eb302	remove bcm63xx_pci_register() call in livebox board ... SVN-Revision: 32661	2012-07-11 09:15:26 +00:00
Florian Fainelli	f8446c3d4c	use physmap-flash on livebox (#8677) ... SVN-Revision: 32660	2012-07-11 09:15:22 +00:00
Florian Fainelli	8765e49fbe	nuport-mac: check netif_receive_skb() return value ... We did not reassign status to netif_receive_skb() return value, we thus almost always incremented the dropped counter because the descriptor status value never matches the NET_RX_DROP. SVN-Revision: 32659	2012-07-11 08:29:01 +00:00
Florian Fainelli	93bf00ff36	fix typo on of_node_put() ... SVN-Revision: 32653	2012-07-09 14:44:15 +00:00
Florian Fainelli	bb1488e5e7	Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board) ... Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 32643	2012-07-06 22:10:37 +00:00
Gabor Juhos	fe015f399f	ar71xx: swizzle address for PCI byte/word access on AR71xx ... Closes #11683. SVN-Revision: 32639	2012-07-06 16:33:12 +00:00
Gabor Juhos	b39df5bb81	ar71xx: select SOC_AR933X and ATH79_DEV_WMAC for the OM2P board ... SVN-Revision: 32638	2012-07-06 11:12:02 +00:00
Gabor Juhos	e258367c19	ar71xx: merge new board patches into the generic patch ... SVN-Revision: 32637	2012-07-06 11:12:01 +00:00
Gabor Juhos	b020a7e7c3	ar71xx: OM2P LC sysupgrade patch ... Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 32635	2012-07-06 11:11:58 +00:00
Florian Fainelli	110fd3525a	call of_node_put() on ethernet node ... SVN-Revision: 32628	2012-07-05 18:46:55 +00:00
Florian Fainelli	a8fab2cb78	fix EPHY clock bit definition after r32489 ... SVN-Revision: 32627	2012-07-05 18:46:52 +00:00
Florian Fainelli	81681d7367	give an unique partition identifier for dLAN USB Extender Combined partition ... SVN-Revision: 32626	2012-07-05 18:46:48 +00:00
Gabor Juhos	eabf96dc22	ar71xx: set firmware version for the TL-WR2543N ... This ensures that the resulting firmware can be flashed from the latest (v3.13.17) offical firmware. SVN-Revision: 32617	2012-07-05 16:25:31 +00:00
Gabor Juhos	7c932579fa	ar71xx: make 2.4GHz wlan LED work on the WR2543N ... Because ath9k does not supports separate LEDs for different bands yet, the 2.4GHz LED will show the activity, even if the 5GHz band is selected. SVN-Revision: 32615	2012-07-05 16:25:26 +00:00
Gabor Juhos	b2f0476871	ar71xx: OM2P sysupgrade support ... Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 32613	2012-07-05 08:26:57 +00:00
Gabor Juhos	797944d3f1	ar71xx: add support for the OpenMesh OM2P-LC board ... Patch-by: Marek Linder <marek@open-mesh.com> SVN-Revision: 32611	2012-07-05 08:26:53 +00:00
Gabor Juhos	1ea2a3cfd8	ar71xx: add profile and build image for the Atheros AP136 reference board ... SVN-Revision: 32609	2012-07-05 08:26:51 +00:00
Gabor Juhos	b219848bfc	ar71xx: AP136 user-space support ... SVN-Revision: 32608	2012-07-05 08:26:50 +00:00
Gabor Juhos	f0cda65bb6	ar71xx: add initial support for the Qualcomm Atheros AP136 board ... SVN-Revision: 32607	2012-07-05 08:26:48 +00:00
Gabor Juhos	d1b237b335	ar71xx: add initial support for the QCA955X SoCs ... SVN-Revision: 32606	2012-07-05 08:26:47 +00:00
Gabor Juhos	7284cf73d6	ar71xx: refactor PCI code to allow registering multiple PCI controllers ... SVN-Revision: 32605	2012-07-05 08:26:45 +00:00
Gabor Juhos	6b8392eb12	generic: ar8216: start aneg on each PHY of the AR8327 ... SVN-Revision: 32604	2012-07-05 08:26:39 +00:00
Florian Fainelli	0fdac1102d	add missing interrupts properties to some device nodes ... SVN-Revision: 32603	2012-07-04 19:37:11 +00:00
Felix Fietkau	bfef2d17eb	ar71xx: update the EW Dorin MTD layout, increase kernel partition size (requested by EW) ... SVN-Revision: 32599	2012-07-04 10:55:56 +00:00
Jonas Gorski	0a3e9c3148	bcm63xx: bcm63xx-spi does not depend on spi-bitbang ... SVN-Revision: 32594	2012-07-03 21:42:17 +00:00
Jonas Gorski	fad888a85c	bcm63xx: 96348A-122 improvements (Comtrend 5365) ... 1) Improve WLAN button. 2) Add 96348A-122 image. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 32593	2012-07-03 21:42:15 +00:00
Jonas Gorski	0c7e676342	bcm63xx: fix second caldata address calculation ... thanks Noltari for spotting this. SVN-Revision: 32592	2012-07-03 21:42:12 +00:00
Jonas Gorski	988147111c	bcm63xx: update patches to latest upstream versions ... SVN-Revision: 32591	2012-07-03 21:42:07 +00:00
Jonas Gorski	1e2262df76	kernel: generic: spi: allow empty (un)prepare transfer ... SVN-Revision: 32590	2012-07-03 21:42:03 +00:00
Gabor Juhos	b8618fd3f2	ar71xx: improve MDIO busy wait code ... SVN-Revision: 32586	2012-07-03 15:24:02 +00:00
Gabor Juhos	86013d40d5	ar71xx: remove the built-in MTD map of the ALL0258N ... Pass the mtd_layout via the kernel command line instead. Also increase the kernel partition size to 1024k, so current kernel can fit in. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32585	2012-07-03 15:24:01 +00:00
Florian Fainelli	4cdc4b1f36	refresh patches ... SVN-Revision: 32581	2012-07-03 09:45:46 +00:00
Hauke Mehrtens	bd9fa13c73	kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02 ... SVN-Revision: 32580	2012-07-02 23:12:58 +00:00
Florian Fainelli	52bae2d2bd	fix watchdog and rng drivers section mismatch (#11767) ... SVN-Revision: 32522	2012-06-29 09:07:54 +00:00
Felix Fietkau	5570b76642	ar71xx: detect and enable MIPS DSP extensions, AR9344 supports them (fixes #11762) ... SVN-Revision: 32520	2012-06-28 16:05:08 +00:00
Felix Fietkau	a5c684de26	kernel: switch openwrt default to TCP cubic from westwood (patch by Dave Täht) ... Despite Westwood's theoretical advantages, in nearly every benchmark we ran last year, TCP cubic won, whether it be on correct RTT estimates, amount of buffering, responsiveness, etc. on current hardware and software designs. (both need timestamps on to work well, besides) TCP cubic is better maintained and understood than westwood, also. While a scenario where westwood would win possibly exists, there is too much buffering in the wifi stack in particular at present, to see any improvement. If you wish to exercise various TCPs under contention, the current svn head of netperf (2.6) has options to switch congestion control agorithms on the fly, as does iperf. SVN-Revision: 32514	2012-06-27 22:32:47 +00:00
Florian Fainelli	1d7878a38b	fix SPI clock frequency selection ... SVN-Revision: 32512	2012-06-27 22:14:50 +00:00
Felix Fietkau	41909c6568	kernel: add missing config symbol ... SVN-Revision: 32498	2012-06-24 20:21:27 +00:00
Vasilis Tsiligiannis	eee358338c	ramips: mac address detection for Fonera 2.0n ... Detect and apply MAC address of a Fonera 2.0n (ramips) Signed-off-by: Malte Forkel <malte.forkel@berlin.de> Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr> SVN-Revision: 32490	2012-06-23 13:58:29 +00:00
Florian Fainelli	81e8757da4	provide an early ioremap cookie of the system configuration register ... SVN-Revision: 32489	2012-06-23 11:03:50 +00:00
Florian Fainelli	98b2bc9189	group SYSDBG register defines in mcs814x.h ... SVN-Revision: 32488	2012-06-23 11:03:45 +00:00
Florian Fainelli	a8965f0005	make hardware.h a forward inclusion of mcs814x.h ... mach/hardware.h is soon to be removed by upstream kernel SVN-Revision: 32487	2012-06-23 11:03:40 +00:00
Florian Fainelli	7c984552ed	remove platform specific initialization from ethernet driver ... Hardware filtering must always be enabled as long as there is an Ethernet device registered, and use device tree for setting the link activity and buffer shifting enable/disable bit. SVN-Revision: 32486	2012-06-23 11:03:35 +00:00
Florian Fainelli	2c47bbc199	regroup interrupt controller register definitions in hardware.h ... SVN-Revision: 32485	2012-06-23 11:03:29 +00:00
Florian Fainelli	481c9faf20	remove handle_irq callback in board-mcs8140-dt.c ... This should have been removed in r32470. SVN-Revision: 32481	2012-06-21 12:20:47 +00:00
Florian Fainelli	4b33e0996e	fix USB led triggers ... SVN-Revision: 32474	2012-06-20 21:58:00 +00:00
Florian Fainelli	a98c74164e	use generic uci defaults functions ... SVN-Revision: 32473	2012-06-20 21:57:56 +00:00
Florian Fainelli	007fa4d638	remove uselss cache invalidations ... SVN-Revision: 32472	2012-06-20 21:57:53 +00:00
Florian Fainelli	9a2367aa6d	improve ethernet driver debugging ... SVN-Revision: 32471	2012-06-20 21:57:49 +00:00
Florian Fainelli	3b0dba382b	do not use MULTI_IRQ_HANDLER it is bogus on our platform ... This caused stalls in the Ethernet DMA block, so until properly written and sorted out, fallback to the assembly version instead. SVN-Revision: 32470	2012-06-20 21:57:45 +00:00
Mirko Vogt	f45cd30543	verified to work - remove broken flag ... SVN-Revision: 32469	2012-06-20 19:04:35 +00:00
Vasilis Tsiligiannis	1978c07539	Fix sysupgrade for squashfs, jffs2 and ext4 images ... * use 'fsync' with 'dd' for image writing * save config to boot partition SVN-Revision: 32465	2012-06-19 22:36:53 +00:00
Florian Fainelli	f4afa00862	add Moschip MSC814x support ... This target currently only supports Moschip's MCS8140 SoC, but support for other chips in the same family (MCS8142, MCS8144) will be easy to add. Target support is entirely using Device Tree for probing peripherals. Drivers support include: - PCI - USB 1 & 2 - watchdog - random number generator - UART - timer - internal Ethernet PHY - Ethernet MAC core Support for the following boards is included using Device Tree - Devolo dLAN USB Extender - Tigal RBT-832 SVN-Revision: 32462	2012-06-19 14:48:56 +00:00
Gabor Juhos	7c87391c55	ar71xx: create profile and build image for the TL-WDR4300 board ... SVN-Revision: 32461	2012-06-19 11:51:20 +00:00
Gabor Juhos	2d97a52045	ar71xx: add user space support for the TL-WDR4300 ... SVN-Revision: 32460	2012-06-19 11:51:18 +00:00
Gabor Juhos	8b9931fd27	ar71xx: add support for the TL-WDR4300 board ... SVN-Revision: 32459	2012-06-19 11:51:17 +00:00
Gabor Juhos	e6a10d5cdd	ar71xx: refresh patches ... SVN-Revision: 32458	2012-06-19 11:51:15 +00:00
Gabor Juhos	86c6543259	ar71xx: make AR8327 LEDs working on the DB120 board ... SVN-Revision: 32457	2012-06-19 10:44:17 +00:00
Gabor Juhos	b934fa2f16	generic: ar8216: allow to configure AR8327 LEDs via platform data ... SVN-Revision: 32456	2012-06-19 10:44:16 +00:00
Gabor Juhos	f509a87f2d	ar71xx: remove superfluous include of asm/mach-ath79/pci.h ... SVN-Revision: 32455	2012-06-19 10:13:43 +00:00
Gabor Juhos	1a1121158f	ar71xx: add a common function to configure USB power GPIOs ... SVN-Revision: 32454	2012-06-19 10:13:41 +00:00
Gabor Juhos	27fea0b6d7	ar71xx: correctly detect NETGEAR WNDRMAC ... This patch helps properly detect a WNDRMAC device. Before this patch the model is detected as "NETGEAR ?????????N". Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru> SVN-Revision: 32453	2012-06-19 10:13:38 +00:00
Gabor Juhos	ee9bc123fb	ar71xx: add USB LED support by default for WNDR3700/WNDR3800/WNDRMAC ... This adds kmod-leds-wndr3700-usb package to a default build for WNDR3700, WNDR3800 and WNDRMAC in order to support the green USB LED. Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru> SVN-Revision: 32452	2012-06-19 10:13:37 +00:00
Gabor Juhos	833b4af816	ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router ... This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router. The platform is based on Ralink RT3052. http://wiki.openwrt.org/toh/petatel/psr-680w Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru> SVN-Revision: 32450	2012-06-19 09:52:15 +00:00
Felix Fietkau	26cf21df02	ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) ... SVN-Revision: 32447	2012-06-19 00:22:04 +00:00
Felix Fietkau	5d364d0ca1	ar71xx: add support for reading the MAC address from OTP ROM on AR933x ... SVN-Revision: 32446	2012-06-19 00:21:58 +00:00
Jo-Philipp Wich	f06473f8ff	optimize kernel config for kvm_guest ... This patch enables few extra kernel options for the kvm_guest subtarget: - Tickless kernel to avoid timer ticks in idle guests, reduces CPU usage - Enable paravirtualization steal time support Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 32436	2012-06-18 23:36:50 +00:00
Jo-Philipp Wich	cbac321164	remove inittab override ... SVN-Revision: 32422	2012-06-18 11:50:37 +00:00
Florian Fainelli	b89c81929e	fix SPI message control handling for BCM6338/6348 ... BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of 16-bits. We were previously using a 16-bits write which corrupted the first byte of the TX FIFO. Also the message type was always set to Full-duplex even in the case of half-duplex messages. SVN-Revision: 32409	2012-06-17 16:17:29 +00:00
Felix Fietkau	50958f5e03	kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets ... The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk SVN-Revision: 32395	2012-06-16 21:06:33 +00:00
Florian Fainelli	b391548cf0	remove broken flags ... Thanks to Nicolas Le Falher for testing on Bifferboard. SVN-Revision: 32389	2012-06-16 16:45:28 +00:00
Jo-Philipp Wich	e3663ff907	use ttyS0 @ 115200 baud as default for KVM guests ... SVN-Revision: 32384	2012-06-15 12:59:49 +00:00
Luka Perkov	1c80d9f21d	kirkwood: fix typo in uci-defaults/leds ... Signed-off-by: Martin Mueller <mm@sig21.net> SVN-Revision: 32343	2012-06-13 18:41:42 +00:00
Felix Fietkau	dddf321b6e	ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection ... SVN-Revision: 32336	2012-06-13 12:54:22 +00:00
Jonas Gorski	f2271efc4e	bcm63xx: readd accidentially dropped ignore_oc in ehci driver ... fixes overcurrent warning spam on 3.3 kernels for bcm63xx again. SVN-Revision: 32221	2012-06-11 22:24:58 +00:00
Felix Fietkau	7cb42738e6	package/index: filter out the libc package from the index ... SVN-Revision: 32187	2012-06-11 01:29:11 +00:00
Luka Perkov	be5229f0ba	kirkwood: ib62x0 fix reboot ... SVN-Revision: 32131	2012-06-08 23:17:46 +00:00
Felix Fietkau	43b5706ef5	xburst: remove an obsolete CompareKernelPatchVer call ... SVN-Revision: 32115	2012-06-07 16:32:44 +00:00
Florian Fainelli	6e5242952c	fix 553-board_96348w3.patch patch wrt gpio-keys-polled ... SVN-Revision: 32096	2012-06-06 20:58:45 +00:00
Felix Fietkau	624505df56	ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg) ... SVN-Revision: 32095	2012-06-06 19:37:49 +00:00
Felix Fietkau	8b46a72583	kernel: add a few more tracing related symbols ... SVN-Revision: 32094	2012-06-06 18:04:00 +00:00
Felix Fietkau	73b8805e78	ar71xx: fix PHY setup on TL-MR3020 (fixes #11572) ... SVN-Revision: 32093	2012-06-06 17:24:12 +00:00
Felix Fietkau	dc9675282e	ar71xx: add a helper function for setting up PHY4 swapping on ar933x ... SVN-Revision: 32092	2012-06-06 17:24:09 +00:00
Felix Fietkau	072bed4760	target: do not make target/*/install depend on target/*/compile - removes one redundant kernel build dir call on target/install ... SVN-Revision: 32091	2012-06-06 17:24:05 +00:00
Felix Fietkau	02ab0d3ef9	ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install ... SVN-Revision: 32090	2012-06-06 17:24:01 +00:00
Florian Fainelli	4c25e42fa8	fix alarm led color for board 96348A-122 ... SVN-Revision: 32089	2012-06-06 16:07:46 +00:00
Florian Fainelli	2f63f097de	add 96348w3 board (#10764) ... SVN-Revision: 32088	2012-06-06 15:45:04 +00:00
Florian Fainelli	9d38989d1f	update livebox board support (#8677) ... Merge most fixes from #8677: - add basic hardware detection of Livebox Blue 5g revisions - register leds and gpio buttons - fix boot address location - properly parse mac addresses Plus some more fixes: - make board_livebox.c more in line with board_bcm963xx.c SVN-Revision: 32087	2012-06-06 15:44:56 +00:00
Florian Fainelli	c69a2cdfbb	fix leds naming for all bcm63xx boards ... SVN-Revision: 32086	2012-06-06 15:44:52 +00:00
Felix Fietkau	ce1d4d7ee9	kernel: make tracing support configurable ... SVN-Revision: 32085	2012-06-06 15:25:57 +00:00
Florian Fainelli	23fc737b9d	backport upstream spi-bcm63xx fixes ... * message pump conversion * not using stopping state * setting spi driver mode bits SVN-Revision: 32078	2012-06-06 13:31:33 +00:00
Florian Fainelli	7b12e9e49c	backport spi message queue infrastructure ... SVN-Revision: 32077	2012-06-06 13:31:30 +00:00
Florian Fainelli	4112094dbb	increase led number in patch 301-led_count.patch ... So that board patches are only touching board-related code SVN-Revision: 32076	2012-06-06 13:31:24 +00:00
John Crispin	95e69ac4f1	clean up generic image building ... SVN-Revision: 32065	2012-06-05 17:49:42 +00:00
Florian Fainelli	9a61b249c5	fix board patches so that new boards are withing appropriate ifdef ... Some new board definitions were added within the #ifdef CONFIG_CPU_6338 section while some other were added within #ifdef CONFIG_CPU_6345, fix this SVN-Revision: 32060	2012-06-05 13:40:41 +00:00
Florian Fainelli	5ec2209734	refresh generic patches ... SVN-Revision: 32059	2012-06-05 13:40:38 +00:00
Florian Fainelli	36c99bcc42	fix bisectability of patch 303-spi-board-info.patch ... It uses spi_register_board_info() from linux/spi/spi.h but does not include it explicitely. SVN-Revision: 32058	2012-06-05 13:40:35 +00:00
John Crispin	a4d96aae8d	bump to 3.3.8 ... SVN-Revision: 32055	2012-06-05 06:57:51 +00:00
Luka Perkov	605012ad5d	kirkwood: reorganize target ... SVN-Revision: 32053	2012-06-05 00:43:56 +00:00
Luka Perkov	7f00e5ffc6	uboot-envtools: update to 2012.04.01 ... SVN-Revision: 32051	2012-06-04 21:55:49 +00:00
Jonas Gorski	ffea8eb913	bcm63xx: fix ethernet on 96328avng and 963281TAN ... The internal switch did not get registered. SVN-Revision: 32041	2012-06-04 08:35:25 +00:00
John Crispin	2b4ef2eafa	adds unset Kbuild symbol ... SVN-Revision: 32026	2012-06-02 14:03:32 +00:00
Gabor Juhos	f4b02b91ce	malta: remove 3.2 patches ... SVN-Revision: 32023	2012-06-02 12:06:28 +00:00
Gabor Juhos	c0c60f7bd3	malta: use common kernel config ... SVN-Revision: 32022	2012-06-02 12:06:26 +00:00
Gabor Juhos	9375e83586	xburst: add missing config symbol ... SVN-Revision: 32021	2012-06-02 12:06:15 +00:00
John Crispin	76e4cd2a24	add $(SUBTARGET) to the filename if available ... SVN-Revision: 32007	2012-05-30 18:04:15 +00:00
John Crispin	47ef62d1b8	adds patch to make Tantos (psb6970) switch buildable again ... SVN-Revision: 32006	2012-05-30 17:41:28 +00:00
Jonas Gorski	3fc76fb781	bcm63xx: build images for 6328 reference boards with various flash sizes ... Build images for 96328avng and 963281TAN (untested) for three different flash sizes: 4MB, 8MB, and 16MB. Known issues: * Button setup unknown, thus no fail-safe available. * All other BCM6328 and BCM63XX issues SVN-Revision: 32004	2012-05-30 10:27:46 +00:00
Jonas Gorski	c454ba3657	bcm63xx: readd accidentially dropped network config for SPW303V ... SVN-Revision: 32003	2012-05-30 10:27:42 +00:00
Gabor Juhos	9e02593b70	generic: ar8216: add revision specific PHY fixups for AR8327 ... SVN-Revision: 32000	2012-05-29 16:39:27 +00:00
Gabor Juhos	0d241e6670	generic: ar8216: replace chip_type field with chip_{ver,rev} in ar8216_priv ... SVN-Revision: 31999	2012-05-29 16:39:26 +00:00
Gabor Juhos	b2fce19a70	generic: ar8216: add chip_is_ar8{216,236,316,327} helpers ... SVN-Revision: 31998	2012-05-29 16:39:24 +00:00
Gabor Juhos	cd7ab1d30b	ar71xx: add default LED setup for the DB120 board ... SVN-Revision: 31997	2012-05-29 16:39:23 +00:00
Gabor Juhos	29a579e43a	cns21xx: use the generic uci-default functions for initial LED setup ... SVN-Revision: 31996	2012-05-29 16:39:22 +00:00
Gabor Juhos	ff74305623	lantiq: use the generic uci-default functions for initial LED setup ... SVN-Revision: 31995	2012-05-29 16:39:21 +00:00
Gabor Juhos	c81c6516de	kirkwood: use the generic uci-default functions for initial LED setup ... SVN-Revision: 31994	2012-05-29 16:39:20 +00:00
Gabor Juhos	ffbb4f88a9	ramips: use the generic uci-default functions for initial LED setup ... SVN-Revision: 31993	2012-05-29 16:39:18 +00:00
Gabor Juhos	4e40bdc190	ar71xx: use the generic uci-default functions for initial LED setup ... SVN-Revision: 31992	2012-05-29 16:39:17 +00:00
Gabor Juhos	ba3ad24514	kirkwood: use uci-defaults to configure different boards ... Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31990	2012-05-29 16:39:15 +00:00
Gabor Juhos	c71838faa1	ramips: WAN LED for D-Link DIR-300-B1 ... Add led devices for D-Link DIR-300-B1 WAN LED. Note that the GPIO state is also ANDed with the esw switch port 4 LED state, which is why I've set the amber LED to default-on. Closes: https://dev.openwrt.org/ticket/11326 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> [ juhosg: - fix comment style in mach-dir-300-revb.c, - remove the PPP specific LED setup, not everyone uses a PPP connection on the WAN interface] SVN-Revision: 31989	2012-05-29 16:39:03 +00:00
Felix Fietkau	a9cd8446f3	ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality ... SVN-Revision: 31956	2012-05-28 20:39:50 +00:00
Felix Fietkau	367e4b3994	ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack ... SVN-Revision: 31934	2012-05-28 02:55:59 +00:00
Felix Fietkau	8039a1bbb2	ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x ... SVN-Revision: 31925	2012-05-27 21:02:41 +00:00
Felix Fietkau	f638414fdc	kernel: fix suppressing -s for linking modules when profiling is enabled ... SVN-Revision: 31924	2012-05-27 21:02:36 +00:00
Gabor Juhos	8865f0923e	ar71xx: fix TL-WR1041 image size ... SVN-Revision: 31923	2012-05-27 17:21:47 +00:00
Gabor Juhos	1c552ba8e5	ramips: rt3883: add device registration code for the SPI controller ... SVN-Revision: 31922	2012-05-27 17:10:00 +00:00
Gabor Juhos	9c241983fc	ramips: allow to use the SPI driver on RT3662/RT3883 ... SVN-Revision: 31921	2012-05-27 17:09:58 +00:00
Gabor Juhos	78a750dcce	ramips: rt3883: fix GPIO reservation for the SPI pins ... SVN-Revision: 31920	2012-05-27 17:09:56 +00:00
Gabor Juhos	0622fdd82c	ramips: rt305x: remove superfluous controller_data assignment ... SVN-Revision: 31919	2012-05-27 17:09:52 +00:00
Gabor Juhos	7f5bec0642	ramips: make rt2x00 firmware extraction quiet ... SVN-Revision: 31918	2012-05-27 17:09:50 +00:00
Gabor Juhos	86dad96fd0	generic: rtl8367: rename a misnamed variable ... SVN-Revision: 31917	2012-05-27 17:09:47 +00:00
Gabor Juhos	705d31203c	generic: rtl8366_smi: remove duplicated spinlock initialization ... SVN-Revision: 31916	2012-05-27 17:09:45 +00:00
Gabor Juhos	9217115687	generic: rtl8366_smi: rename debugfs Kconfig symbol ... SVN-Revision: 31915	2012-05-27 17:09:43 +00:00
Gabor Juhos	466ef30173	generic: rtl8367: allow to use VLANs > 31 ... SVN-Revision: 31914	2012-05-27 17:09:41 +00:00
John Crispin	f567980d38	move files-3.3 -> files ... SVN-Revision: 31912	2012-05-27 16:13:02 +00:00
John Crispin	8002770520	3.2 R.I.P. ... SVN-Revision: 31911	2012-05-27 16:12:59 +00:00
John Crispin	81ddc886e1	dgn3500 support with eeprom loading from sysfs ... WIFI eeprom: As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules. I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data. SPI flash: It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above. I've kept the original mtd partitioning that Netgear uses. Buttons/LED: Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working. The green wifi led is connected to an unknown atheros gpio. Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com> SVN-Revision: 31910	2012-05-27 16:02:22 +00:00
John Crispin	6e8fe84472	fixes zyxel p2601hnfx ... moves the linux partition, removes the config partition and the buttons settings have small adjustments. Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31909	2012-05-27 16:02:20 +00:00
John Crispin	3f2f50c681	Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values. ... Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31908	2012-05-27 16:02:16 +00:00
Felix Fietkau	51bc47ce7c	kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD ... SVN-Revision: 31906	2012-05-27 15:16:37 +00:00
Gabor Juhos	0b8c1c8dfb	linux/3.2: R.I.P. ... SVN-Revision: 31905	2012-05-27 15:01:37 +00:00
Gabor Juhos	20ba6d90e3	xburst: remove support for old kernels ... SVN-Revision: 31904	2012-05-27 15:01:35 +00:00
Gabor Juhos	d043cb2c34	xburst: switch to 3.3 and add broken flag ... SVN-Revision: 31903	2012-05-27 15:01:33 +00:00
Gabor Juhos	9a26e9f843	xburst: add support for 3.3 ... SVN-Revision: 31902	2012-05-27 15:01:32 +00:00
Gabor Juhos	9dd7a6d9e2	ppc44x: remove 3.2 support ... SVN-Revision: 31901	2012-05-27 15:01:30 +00:00
Gabor Juhos	05d74942b1	ppx44x: switch to 3.3 and add broken flag ... SVN-Revision: 31900	2012-05-27 15:01:28 +00:00
Gabor Juhos	9300e0496c	ppc44x: add support for 3.3 ... Compile tested only. SVN-Revision: 31899	2012-05-27 15:01:27 +00:00
Gabor Juhos	c50f1f7536	cobalt: switch to 3.3 and add broken flag ... Compile tested only. SVN-Revision: 31898	2012-05-27 15:01:26 +00:00
Gabor Juhos	471cf87ff0	ep93xx: remove 3.2 support ... SVN-Revision: 31897	2012-05-27 15:01:24 +00:00
Gabor Juhos	400b9b5b87	ep93xx: switch to 3.3 and add broken flag ... SVN-Revision: 31896	2012-05-27 15:01:23 +00:00
Gabor Juhos	7501f2364f	ep93xx: add support for 3.3 ... Compile tested only. SVN-Revision: 31895	2012-05-27 15:01:21 +00:00
Gabor Juhos	907e88a37f	au1000: remove 3.2 support ... SVN-Revision: 31894	2012-05-27 15:01:18 +00:00
Gabor Juhos	fbe10e73c6	au1000: switch to 3.3 and add broken flag ... SVN-Revision: 31893	2012-05-27 15:01:17 +00:00
Gabor Juhos	e065d5cfbe	au1000: add support for 3.3 ... Compile tested only. SVN-Revision: 31892	2012-05-27 15:01:15 +00:00
Gabor Juhos	de4c4d35e1	linux/3.1: R.I.P. ... SVN-Revision: 31891	2012-05-27 15:01:09 +00:00
Gabor Juhos	cead4b47ab	omap24xx: remove 3.1 support ... SVN-Revision: 31890	2012-05-27 15:01:07 +00:00
Gabor Juhos	7a4db11fbb	omap24xx: switch to 3.3 and add broken flag ... SVN-Revision: 31889	2012-05-27 15:01:05 +00:00
Gabor Juhos	d004168445	cns3xxx: remove 3.1 support ... SVN-Revision: 31888	2012-05-27 15:01:03 +00:00
Gabor Juhos	6f2ca5da39	cns3xxx: switch to 3.3 and add broken flag ... SVN-Revision: 31887	2012-05-27 15:01:02 +00:00
Felix Fietkau	6f89cffc9a	kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers ... SVN-Revision: 31886	2012-05-27 14:43:58 +00:00
Jonas Gorski	ec7786c2ec	bcm63xx: build images for DSL-274XB revision F1 ... Build images for D-Link DSL-274XB revision F1. Flashing through original web UI as well as CFE works. Known issues: * wifi led inverted (on when wifi is off and vice cersa) * same issues as generic bcm6328 support SVN-Revision: 31885	2012-05-27 13:22:51 +00:00
Jonas Gorski	8aac009cc9	bcm63xx: add ath9k to atheros wifi profile ... SVN-Revision: 31884	2012-05-27 13:22:48 +00:00
Jonas Gorski	4aa43122ab	bcm63xx: enable bcm6328 support and required drivers ... BCM6328 support is in a usable state, with the following issues * internal switch port not configurable * external phys not supported * broadcom wifis will probably not work correctly * and all other generic bcm63xx issues (so yes, still no ADSL) SVN-Revision: 31883	2012-05-27 13:22:46 +00:00
Jonas Gorski	e5575fe335	bcm63xx: add support for DSL-274XB rev F1 ... SVN-Revision: 31882	2012-05-27 13:22:43 +00:00
Jonas Gorski	a7a82db16f	bcm63xx: fix port state after network down ... bcm_enetsw_probe did not properly reset port states, resulting in connected ports staying disabled after bringing up the interface the second time. SVN-Revision: 31881	2012-05-27 13:22:40 +00:00
Jonas Gorski	e19ed52fd1	bcm63xx: add a fixup for ath9k devices ... SVN-Revision: 31880	2012-05-27 13:22:37 +00:00
Jonas Gorski	e34018cc9e	bcm63xx: add support for the HSSPI controller ... Add support for the HSSPI controller found on bcm6328 and SPI attached flash. SVN-Revision: 31879	2012-05-27 13:22:33 +00:00
Jonas Gorski	099d5eec06	bcm63xx: add preliminary support for bcm6328 ... SVN-Revision: 31878	2012-05-27 13:22:29 +00:00
Jonas Gorski	7dbb132c88	bcm63xx: add flash type detection ... SVN-Revision: 31877	2012-05-27 13:22:25 +00:00
Jonas Gorski	b0ffeb0021	bcm63xx: pad Speedport W303 V images to 4 MiB ... Prevents CFE from flashing to the second image offset. Fix up the rootfs length on first boot else CFE will complain. SVN-Revision: 31876	2012-05-27 13:22:22 +00:00
Jonas Gorski	226b030e44	bcm63xx: add a default switch configuration for DSL-274XB ... SVN-Revision: 31874	2012-05-27 13:22:17 +00:00
Jonas Gorski	db1ff5c6fa	bcm63xx: setup network config through uci-defaults ... SVN-Revision: 31873	2012-05-27 13:22:14 +00:00
Jonas Gorski	72b4fdecc9	bcm63xx: move the board name workaround to /lib/brcm63xx.sh ... SVN-Revision: 31872	2012-05-27 13:22:11 +00:00
Jonas Gorski	dd37687de0	bcm63xx: use the exact board id as board identification string ... No need to keep the bcm63xx/ at the start or the chipid info at the end. SVN-Revision: 31871	2012-05-27 13:22:08 +00:00
Felix Fietkau	230c0eb2cb	kernel: fix a warning in the connmark module ... SVN-Revision: 31856	2012-05-24 18:25:08 +00:00
Gabor Juhos	2ae5581447	kernel: update linux 3.3 to 3.3.7 ... SVN-Revision: 31848	2012-05-23 21:05:32 +00:00
Gabor Juhos	c57409e79d	ar71xx: fix an insignificant typo ... Patch from #11485. SVN-Revision: 31847	2012-05-23 21:05:30 +00:00
Gabor Juhos	013f434f5b	ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD ... Patch by Kamil Trzciński <ayufan@osk-net.pl> SVN-Revision: 31846	2012-05-23 21:05:25 +00:00
Gabor Juhos	758f670376	ar71xx: add support for TP-Link TL-MR3040 ... Support for TP-Link TL-MR3040. Power LED not working - always on red, after start should be green. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 31845	2012-05-23 21:05:24 +00:00
Gabor Juhos	e4720dfa95	ramips: Add byte queue limits support to net/ethernet/ramips_main.c ... Add byte queue limits support to net/ethernet/ramips_main.c "Byte queue limits are a mechanism to limit the size of the transmit hardware queue on a NIC by number of bytes. The goal of these byte limits is too reduce latency (HOL blocking) caused by excessive queuing in hardware (aka buffer bloat) without sacrificing throughput." Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 31844	2012-05-23 21:05:23 +00:00
Gabor Juhos	1d286fd755	ramips: Enable sysupgrade for Sitecom WL-351 ... Sysupgrade works just fine on my Sitecom WL-351 after adding this oneliner. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 31843	2012-05-23 21:05:22 +00:00
Gabor Juhos	1e1c0a5405	linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver ... Should fix #11513. Tested with the x86/generic squashfs image within a VM. SVN-Revision: 31841	2012-05-23 21:05:19 +00:00
Felix Fietkau	9037c2ccc6	lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520 ... SVN-Revision: 31835	2012-05-20 21:58:03 +00:00
Felix Fietkau	ce59af117c	kernel: merge a net-next fq_codel backlog handling fix ... SVN-Revision: 31813	2012-05-18 22:12:15 +00:00
Gabor Juhos	02c2f449d7	omap24xx: add support for 3.3 ... Compile tested only. SVN-Revision: 31810	2012-05-18 20:22:32 +00:00
Gabor Juhos	c2a2d59db5	cns3xxx: add support for 3.3 ... Compile tested only. SVN-Revision: 31809	2012-05-18 20:10:53 +00:00
Gabor Juhos	1fd4bf270b	linux/2.6.39: R.I.P. ... SVN-Revision: 31808	2012-05-18 20:10:51 +00:00
Gabor Juhos	05c0d8b28e	cns3xxx: sync kernel config ... SVN-Revision: 31807	2012-05-18 20:10:48 +00:00
Gabor Juhos	9718f03e24	cns3xxx: remove 2.6.39 support ... SVN-Revision: 31806	2012-05-18 20:10:46 +00:00
Gabor Juhos	9e78becbac	cns3xxx: switch to 3.1 ... Compile tested only. SVN-Revision: 31805	2012-05-18 20:10:44 +00:00
Gabor Juhos	07b5a3eea2	x86: remove support for old kernels ... SVN-Revision: 31804	2012-05-18 20:10:42 +00:00
Gabor Juhos	604e3aac0a	x86: remove subtarget specific LINUX_VERSION overrides ... SVN-Revision: 31803	2012-05-18 20:10:38 +00:00
Gabor Juhos	d9dab97d38	x86/ep80579: switch to 3.3 ... Also fix build errors in the ep80579-drivers package. Compile tested only. SVN-Revision: 31802	2012-05-18 20:10:33 +00:00
Hauke Mehrtens	c63ef04874	brcm47xx: fix nvram read out on devices with serial flash ... detect nvram on Linksys E3200 SVN-Revision: 31790	2012-05-18 16:04:10 +00:00
Hauke Mehrtens	7ad663dda6	brcm47xx: bcma: fix null pointer ... SVN-Revision: 31789	2012-05-18 15:46:30 +00:00
Hauke Mehrtens	b4ecf522cd	brcm47xx: ssb: recognize ARM Cortex M3 ... SVN-Revision: 31788	2012-05-18 15:45:51 +00:00
Hauke Mehrtens	7be88d2ad8	brcm47xx: some fixes for the USB driver ... SVN-Revision: 31787	2012-05-18 15:44:25 +00:00
Gabor Juhos	e3678eb33e	cobalt: remove 2.6.39 specific patches ... SVN-Revision: 31785	2012-05-18 09:59:22 +00:00
Gabor Juhos	a5de52c244	x86/olpc: switch to 3.3 ... Compile tested only. SVN-Revision: 31784	2012-05-18 09:57:32 +00:00
Gabor Juhos	9e54e012d6	x86: image: select bootscript images by default for OLPC ... SVN-Revision: 31783	2012-05-18 09:57:29 +00:00
Felix Fietkau	3f62f5211a	adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407 ... SVN-Revision: 31781	2012-05-17 21:20:23 +00:00
Felix Fietkau	03babf3641	target: add a feature flag for RTC support ... SVN-Revision: 31777	2012-05-17 15:28:09 +00:00
Hauke Mehrtens	c30405070c	kernel: add some missing config options added by r31756 ... SVN-Revision: 31774	2012-05-17 13:28:30 +00:00
Hauke Mehrtens	273797f15a	kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2 ... SVN-Revision: 31772	2012-05-17 13:22:38 +00:00
Hauke Mehrtens	3491d8c017	brcm47xx: remove support for kernel 3.2 ... SVN-Revision: 31771	2012-05-17 13:20:10 +00:00
Gabor Juhos	562e468ae5	x86/thincan: switch to 3.3 ... Compile tested only. SVN-Revision: 31765	2012-05-17 06:41:01 +00:00
Gabor Juhos	1f7f8376a6	x86/xen_domu: switch to 3.3 ... Compile tested only. SVN-Revision: 31764	2012-05-17 06:41:00 +00:00
Gabor Juhos	8bb7ddecfd	x86/kvm_guest: switch to 3.3 ... Compile tested only. SVN-Revision: 31763	2012-05-17 06:40:58 +00:00
Gabor Juhos	f14d1a588d	x86/generic: switch to 3.3 ... Compile tested only. SVN-Revision: 31762	2012-05-17 06:40:56 +00:00
Felix Fietkau	54edbfabac	kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht) ... Codel is a new AQM algorithm and RED replacement designed by Kathie Nichols and Van Jacobson, and published in ACM queue: http://queue.acm.org/detail.cfm?id=2209336 Codel stands for "Controlled Delay", and needs no knobs in the general case, twiddled, for optimum results. It aims for 5ms of delay, at most, when in use. Additionally, fq_codel (by eric dumazet) builds on codel to provide fair queuing superior to what could be had with SFQ, and drop behavior saner than RED, BLUE, or choke. These patches are backported from net-next and are known to work on Linux 3.3.4 and later. Includes updates to codel for better portability and speed SVN-Revision: 31756	2012-05-16 15:23:03 +00:00
Gabor Juhos	eb2fe5e863	x86/alix2: switch to 3.3 ... Compile tested only. SVN-Revision: 31753	2012-05-16 10:45:02 +00:00
Gabor Juhos	fb7da5bbde	x86/net5501: switch to 3.3 ... Compile tested only. SVN-Revision: 31752	2012-05-16 10:44:59 +00:00
Gabor Juhos	9e049ce25c	x86: sync 3.3 configs ... SVN-Revision: 31751	2012-05-16 10:44:55 +00:00
Gabor Juhos	19f691f8e4	x86: sync 3.2 configs ... SVN-Revision: 31750	2012-05-16 10:44:52 +00:00
Gabor Juhos	724fd5e657	x86: sync 2.6.39 configs ... SVN-Revision: 31749	2012-05-16 10:44:49 +00:00
Gabor Juhos	637fd23428	linux/3.3: add missing symbol ... SVN-Revision: 31748	2012-05-16 10:44:46 +00:00
Gabor Juhos	67675fd48d	linux: add CONFIG_POWER_SUPPLY_DEBUG symbol ... It was missing in the previous commit. SVN-Revision: 31738	2012-05-15 11:12:31 +00:00
Gabor Juhos	39994008cb	linux: move certain disabled symbols to the generic configs ... * CONFIG_ARCH_DMA_ADDR_T_64BIT * CONFIG_ARCH_HAS_ILOG2_U32 * CONFIG_ARCH_HAS_ILOG2_U64 * CONFIG_ARCH_PHYS_ADDR_T_64BIT * CONFIG_ARCH_SUPPORTS_MSI * CONFIG_GENERIC_CPU_DEVICES * CONFIG_HWMON_DEBUG_CHIP * CONFIG_I2C_PXA_PCI * CONFIG_LEDS_GPIO * CONFIG_MINIX_FS_NATIVE_ENDIAN * CONFIG_MLX4_CORE * CONFIG_POWER_SUPPLY * CONFIG_POWER_SUPPLY_DEBUG * CONFIG_QUOTACTL * CONFIG_SDIO_UART * CONFIG_SENSORS_K10TEMP * CONFIG_SENSORS_SCH56XX_COMMON * CONFIG_SENSORS_VIA_CPUTEMP * CONFIG_SERIO_AMBAKMI * CONFIG_SERIO_I8042 * CONFIG_SERIO_LIBPS2 * CONFIG_SERIO_PCIPS2 * CONFIG_SERIO_RAW * CONFIG_SERIO_SERPORT * CONFIG_SPI_BITBANG * CONFIG_SPI_GPIO SVN-Revision: 31737	2012-05-15 10:58:52 +00:00
Felix Fietkau	a3f2fd187b	ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) ... SVN-Revision: 31736	2012-05-15 10:36:39 +00:00
John Crispin	364f47e454	code style cleanup of the mach files ... Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31735	2012-05-15 09:38:05 +00:00
John Crispin	07dca108a9	adds zyxel p2601hnfx support ... Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31734	2012-05-15 09:38:02 +00:00
John Crispin	9785ec070e	set 3.3.6 as default ... SVN-Revision: 31733	2012-05-15 09:37:59 +00:00
John Crispin	c61ada1db8	set 3.3.5 as default ... SVN-Revision: 31718	2012-05-14 16:11:26 +00:00
Gabor Juhos	2fceae7ec4	linux/3.0: R.I.P. ... It is used by the broken omap35xx/gumstix target only. SVN-Revision: 31717	2012-05-14 15:48:34 +00:00
Gabor Juhos	a3d349a3b3	realview: remove 3.0 support ... SVN-Revision: 31716	2012-05-14 15:48:32 +00:00
Gabor Juhos	e2ecabd761	realview: switch to 3.3 ... SVN-Revision: 31715	2012-05-14 15:48:31 +00:00
Gabor Juhos	46c7d58726	realview: add 3.3 support ... SVN-Revision: 31714	2012-05-14 15:48:29 +00:00
Gabor Juhos	8f629f2a22	linux/3.3: more missing config symbols ... SVN-Revision: 31713	2012-05-14 15:48:23 +00:00
Felix Fietkau	fab5ee9566	imagebuilder: explicitly install the kernel .ipk before installing anything else, it is no longer part of the package index (fixes #11450) ... SVN-Revision: 31711	2012-05-14 14:00:01 +00:00
Hauke Mehrtens	a798a81890	kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX ... SVN-Revision: 31710	2012-05-14 11:28:02 +00:00
Gabor Juhos	b472e5d12e	kernel: update linux 3.3 to 3.3.6 ... SVN-Revision: 31709	2012-05-14 09:18:32 +00:00
Hauke Mehrtens	679b6a0722	amazon: fix section mismatch ... SVN-Revision: 31707	2012-05-13 15:31:42 +00:00
Hauke Mehrtens	abd74f86b4	amazon: update amazon target to kernel 3.3 ... This is just compile tested, my device is currently not working. SVN-Revision: 31706	2012-05-13 15:10:40 +00:00
Gabor Juhos	60d3ffb49a	gemini: remove 2.6.37 support ... SVN-Revision: 31700	2012-05-13 12:04:04 +00:00
Gabor Juhos	672ff3de6e	gemini: switch to 3.3 ... SVN-Revision: 31699	2012-05-13 12:04:02 +00:00
Gabor Juhos	d0ac4c1f03	gemini: add support for 3.3 ... SVN-Revision: 31698	2012-05-13 12:03:59 +00:00
Hauke Mehrtens	482b99a660	brcm47xx: generate image for Linksys WRT610N V1 ... SVN-Revision: 31696	2012-05-13 00:16:57 +00:00
Hauke Mehrtens	31c2c485c1	kernel: ssb: add PCI IDs 0x4322 and 43222 ... The 0x4322 ID is found on the BCM4322 used on some SoCs like the Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID is found on the BCM43222 used on some other SoCs like the D-Link DSL-2760U connected to a BCM63xx. This fixes #10887. SVN-Revision: 31695	2012-05-13 00:08:12 +00:00
Hauke Mehrtens	5acb0b72be	brcm47xx: fix tg3 ssb patch ... Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again). SVN-Revision: 31694	2012-05-12 23:59:12 +00:00
Gabor Juhos	e710aeeab1	linux/2.6.38: R.I.P. ... It is used only by the broken coldfire target. SVN-Revision: 31688	2012-05-12 12:05:21 +00:00
Gabor Juhos	08ed044595	linux/2.6.37: R.I.P. ... SVN-Revision: 31687	2012-05-12 12:05:19 +00:00
Gabor Juhos	c8cede6aa7	linux: add broken flag to remaining targets which are using 2.6.37 ... SVN-Revision: 31686	2012-05-12 12:05:18 +00:00
Gabor Juhos	a2efef024e	iop32x: remove 2.6.37 support ... SVN-Revision: 31685	2012-05-12 10:49:36 +00:00
Gabor Juhos	a5d4de7da2	iop32x: switch to 3.3 ... It is compile tested only, so add a broken flag. SVN-Revision: 31684	2012-05-12 10:49:34 +00:00
Gabor Juhos	598fe0e93b	iop32x: add 3.3 support ... SVN-Revision: 31683	2012-05-12 10:49:32 +00:00
Gabor Juhos	bf8e96712e	sibyte: remove 2.6.37 support ... SVN-Revision: 31682	2012-05-12 10:49:30 +00:00
Gabor Juhos	edb129bb24	sibyte: switch to 3.3 ... It is compile tested only, so add a broken flag. SVN-Revision: 31681	2012-05-12 10:49:28 +00:00
Gabor Juhos	fd651daa4b	sibyte: add 3.3 support ... SVN-Revision: 31680	2012-05-12 10:49:26 +00:00
Gabor Juhos	4f6acae5f7	ixp4xx: fix ixp4xx_crypto build error ... SVN-Revision: 31679	2012-05-12 10:49:23 +00:00
Gabor Juhos	cabfa5b364	orion: remove the broken broken flag ... It is working on the Linksys WRT350N v2 at least: http://pastebin.com/KCAbJZs9 Additionally, the flag was added to a wrong place so it had no effect. Thanks to StrikerNL for testing. SVN-Revision: 31674	2012-05-10 20:20:43 +00:00
Gabor Juhos	ec27c35ebe	kirkwood: fix Kconfig symbol for NSA-310 ... SVN-Revision: 31673	2012-05-09 16:16:52 +00:00
John Crispin	dc4cfd3a64	Add 3.3 config files ... SVN-Revision: 31672	2012-05-09 12:52:24 +00:00
John Crispin	75827c538d	Add missing 3.3 patches ... SVN-Revision: 31671	2012-05-09 12:52:21 +00:00
John Crispin	7d638fbb2f	Drop 2.6.32 support ... SVN-Revision: 31670	2012-05-09 12:52:19 +00:00
Gabor Juhos	200227e0b4	kirkwood: add support for the ZyXEL NSA-310 ... SVN-Revision: 31669	2012-05-09 11:38:43 +00:00
Gabor Juhos	213cbf4297	kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support ... Based on a patch by Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31668	2012-05-09 11:38:41 +00:00
Gabor Juhos	d4876692c1	kirkwood: enable GPIO sysfs interface ... SVN-Revision: 31667	2012-05-09 11:38:40 +00:00
Gabor Juhos	d1eed108bb	kirkwood: nuke 2.6.37 support ... SVN-Revision: 31666	2012-05-09 11:38:39 +00:00
Gabor Juhos	861b9b25e0	kirkwood: switch to 3.3 ... SVN-Revision: 31665	2012-05-09 11:38:37 +00:00
Gabor Juhos	b272041998	kirkwood: add 3.3 support ... Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31664	2012-05-09 11:38:36 +00:00
Gabor Juhos	500ec36515	ixp4xx: nuke 2.6.37 support ... SVN-Revision: 31663	2012-05-09 10:48:44 +00:00
Gabor Juhos	d25a4e7ddc	ixp4xx: switch to 3.3 ... SVN-Revision: 31662	2012-05-09 10:48:43 +00:00
Gabor Juhos	d5093de0b1	mpc85xx: remove 2.6.38 support ... SVN-Revision: 31661	2012-05-09 10:48:41 +00:00
Gabor Juhos	ab71a428c5	mpc85xx: switch to 3.3 and add broken flag ... It is compile tested only. SVN-Revision: 31660	2012-05-09 10:48:39 +00:00
Gabor Juhos	db376b45d9	orion: nuke 3.0 support ... SVN-Revision: 31659	2012-05-09 10:48:38 +00:00
Gabor Juhos	24e2385a59	orion: switch to 3.3 and add broken flag ... It is compile tested only. SVN-Revision: 31658	2012-05-09 10:48:37 +00:00
Gabor Juhos	d640a15b73	linux/3.3: add missing RTC symbol ... SVN-Revision: 31654	2012-05-09 10:48:30 +00:00
Gabor Juhos	93c9980b94	ar71xx: fix build error if PCI is disabled ... SVN-Revision: 31646	2012-05-07 21:16:22 +00:00
Gabor Juhos	34018a630f	kernel: update linux 3.3 to 3.3.5 ... SVN-Revision: 31645	2012-05-07 20:11:43 +00:00
Gabor Juhos	6b5012ce1f	pxa: remove 2.6.37 support ... SVN-Revision: 31643	2012-05-07 17:40:15 +00:00
Gabor Juhos	1f1fd8616f	pxa: switch to 3.3 and mark it as broken ... It is working in qemu, but it has not been tested on real hardware. SVN-Revision: 31642	2012-05-07 17:40:09 +00:00
Gabor Juhos	b284c0e804	pxa: add support for 3.3 ... SVN-Revision: 31641	2012-05-07 17:40:06 +00:00
Jo-Philipp Wich	1a01559520	atheros: Fix compilation ... With our recent switch to the 3.3 kernel target, some headers were occidentally omitted. Signed-off-by: Jonathan Bither <jonbither@gmail.com> SVN-Revision: 31640	2012-05-07 17:06:39 +00:00
Jonas Gorski	b218b15709	bcm63xx: fix a race between PCI bus scan and fallback sprom registration ... The fallback sprom handler was installed too late, resulting in ssb failing to get a valid sprom on some devices. Fixes #11384. SVN-Revision: 31638	2012-05-06 21:25:34 +00:00
Felix Fietkau	0ff3c396d3	kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes ... SVN-Revision: 31637	2012-05-06 21:19:14 +00:00
Hauke Mehrtens	d30f8da466	brcm47xx: add gpio_request_one() ... This fixes a compile error with kernel 3.3. SVN-Revision: 31635	2012-05-06 20:44:37 +00:00
Felix Fietkau	7799c88aa4	atheros: clean up the patches some more ... SVN-Revision: 31626	2012-05-06 17:15:00 +00:00
Felix Fietkau	9b20187ad5	atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels ... SVN-Revision: 31625	2012-05-06 17:08:30 +00:00
Jonas Gorski	30362b90af	AR7: don't mark as broken ... Linux 3.3.4 boots fine on my AR7 device. SVN-Revision: 31623	2012-05-06 14:04:19 +00:00
Gabor Juhos	28e897845f	ar7: remove 2.6.37 support ... SVN-Revision: 31617	2012-05-05 17:32:43 +00:00
Gabor Juhos	047a51c4fd	ar7: switch to 3.3 and mark the target as broken ... SVN-Revision: 31616	2012-05-05 17:32:41 +00:00
Gabor Juhos	dd884a6b73	ar7: add 3.3 support ... SVN-Revision: 31615	2012-05-05 17:32:39 +00:00
Gabor Juhos	e85a44f11b	ar7: fix kernel_entry extraction ... SVN-Revision: 31614	2012-05-05 17:32:36 +00:00
Gabor Juhos	9486904079	ar71xx: add profile and build image for the TL-WR1041N v2 board ... Patch-by: Vince Huang <axishero@foxmail.com> SVN-Revision: 31610	2012-05-05 17:02:41 +00:00
Gabor Juhos	ab897ab04e	ar71xx: add support for the TP-Link TL-WR1041N v2 board ... Patch-by: Vince Huang <axishero@foxmail.com> SVN-Revision: 31608	2012-05-05 17:02:35 +00:00
Gabor Juhos	56f2e08537	ar71xx: update 3.3 patches ... SVN-Revision: 31602	2012-05-05 13:56:35 +00:00
Gabor Juhos	8fffc6d6df	ar71xx: fix a typo in the db120 mach file ... Reported-by: Sven Eckelmann <sven@narfation.org> SVN-Revision: 31601	2012-05-05 13:56:30 +00:00
Hauke Mehrtens	8c352ff853	brcm47xx: update target to kernel 3.3 ... SVN-Revision: 31599	2012-05-05 12:53:37 +00:00
Gabor Juhos	2e3f8c480e	linux/2.6.32: R.I.P. ... SVN-Revision: 31597	2012-05-05 11:43:34 +00:00
Gabor Juhos	e005aed223	rdc: remove 2.6.32 support ... SVN-Revision: 31596	2012-05-05 11:43:32 +00:00
Gabor Juhos	0e086cfaf7	rdc: switch to 3.3 and mark the target as broken ... SVN-Revision: 31595	2012-05-05 11:43:30 +00:00
Gabor Juhos	787b253859	rb532: remove 2.6.32 support ... SVN-Revision: 31594	2012-05-05 11:43:29 +00:00