Commit Graph

14 Commits

Author SHA1 Message Date
Robert Marko
7baa1573eb
mac80211: ath11k: sync with ath-next
Synchronize the ath11k backports with the current ath-next tree.

This introduces support for MBSSID and EMA, adds factory test mode and
some new HTT stats.

Tested-by: Francisco G Luna <frangonlun@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit acde5271a6)
2023-06-12 22:10:16 +02:00
Robert Marko
15abf8d18b
mac80211: ath11k: sync with ath-next
Synchronize the ath11k backports with the current ath-next tree.

This replaces the 160MHz with the upstreamed one, fixes 6GHz only WIPHY
registration, allows SAR usage on WCN6750 and plenty of REO fixes.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-05-06 07:15:57 +02:00
Robert Marko
f7f47b1369
mac80211: ath11k: replace 160MHz fix with upstream pending one
QCA has finally sent a proper fixup for the 160MHz regression upstream,
so lets use the pending fix which also properly sets center frequency 2
in case 80+80 MHz is used.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-04-18 13:59:12 +02:00
Felix Fietkau
e722b667c5 mac80211: update to v6.1.24
Drop patches accepted upstream

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-18 10:43:06 +02:00
Robert Marko
930e702d72
mac80211: ath11k: sync with ath-next
Synchronize the ath11k backports with the current ath-next tree.

This replaces the management TLV pending fix with the upstreamed one,
fixes traffic flooding when AP and monitor modes are used at the same time,
fixes QCN9074 always showing -95 dBm for station RSSI in dumps,
fixes potential crash on boot if spectral scan is enabled due to writing to
unitialized memory and adds 11d scan offloading for WCN6750 and WCN6855.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-04-12 16:06:03 +02:00
Robert Marko
7475321f46 mac80211: ath11k: Remove regulatory intersection
Currently, during initialization ath11k will receive a regulatory event
from the firmware in which it will receive the default regulatory domain
code and accompanying rules list and report those to the kernel.

Then if you try to change the regulatory domain to a different country code
it will do a weird thing in which it will send that to the FW and after
receiving the appropriate regulatory event it will parse the rules.
However, while its parsing there is a weird thing being done, and that is
that new raw rules from FW get intersected with the rules from the default
domain.
This is creating a big issue as the default domain is almost always set to
"US" or just "00" aka world so ath11k will unfairly limit you to the most
restrictive combination of rules based on the default domain and your
desired domain.
For example, in ETSI countries this is causing channels 12 and 13 on 2.4GHz
to not be usable since "US" limits 2.4GHz to 2472MHz instead of 2482MHz
like ETSI countries do.

So, lets do what TIP and even QCA do in their ath11k downstream tree and
completely get rid of the interesection code in ath11k.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-04-11 20:20:18 +02:00
Robert Marko
3188480092
mac80211: ath11k: Fix invalid mgmt rx frame length issue
FW 2.9 uses multiple TLV-s for the RX mgmt even which driver currently does
not support, so import a pending upstream patch to fix that [1].

[1] https://patchwork.kernel.org/project/linux-wireless/patch/20230320133840.30162-1-quic_nmaran@quicinc.com/

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-04-07 11:11:44 +02:00
Robert Marko
da4f7e51f3 mac80211: ath11k: restore 160MHz support
Recent ath11k sync introduced a regression causing 80+80 and 160MHz to
stop being advertised and thus not selectable due to the respective feature
flags being cleared.

So, until we get answers upstream to what was the reasoning behind this and
it gets fixed, lets just remove the flag clearing to reanable 160MHz.

Fixes: 789a0bac35 ("mac80211: ath11k: sync with ath-next")
Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-04-01 19:30:48 +02:00
Robert Marko
789a0bac35 mac80211: ath11k: sync with ath-next
Synchronize the ath11k backports with the current ath-next tree.

This brings in actually setting the MU-MIMO parameters in HW and 6GHz
regulatory support along with some minor resource handling fixes.

This allows to easily backport further fixes as cherry picking them has
started requiring manual conflict resolution.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-03-20 12:23:11 +01:00
Robert Marko
524704e677
mac80211: ath11k: sync with ath-next
Synchronize the ath11k backports with the current ath-next tree.

This backports several memory leak issues, PCI IRQ fixup, peer add locking
fix as well as IPQ5018 support, though IPQ5018 support is unused for now.

This allows to easily backport further fixes as cherry picking them has
started requiring manual conflict resolution.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-02-22 10:31:48 +01:00
Robert Marko
35f28f2838 mac80211: add ath11k AHB support
This is the follow up to the PCI support commit now providing support for
AHB variant as well, though currently only for ipq807x as that is only
OpenWrt supported SoC ath11k supports as well.

Currently, we are disabling coldboot calibration on ipq807x as it does not
work, there is a remoteproc bug that makes it come late out of reset so
disable coldboot until that is fixed.

Also, as ath11k is quite memory hungry, we are introducing a config option
to use the limits for 512MB of RAM, similar to what QCA does downstream but
in way simpler and cleaner way so that 512MB save some RAM.
512MB profile is also set as the default for now.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-01-16 12:42:23 +01:00
Robert Marko
4f592fb819 mac80211: ath11k: hack for multiple card support
This is a temporary workaround for supporting multiple cards or AHB+PCI.

There is ongoing upstream work to properly support this based of
advertised FW features, but that is still ongoing.

This is only supported on QCN9074 cards due to FW limitation, so HW ID
is checked in order to prevent breaking QCA6390 and other popular cards.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-01-16 12:42:23 +01:00
Robert Marko
c83dbcdf8f
mac80211: ath11k: fix monitor bringup
Currently, ath11k will crash the crash if we try to bringup the monitor
mode interface.
Luckily, it has already been fixed upstream, so backport the patches
fixing it.

Fixes: 93ae4353cd ("mac80211: add ath11k PCI support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-01-12 15:17:18 +01:00
Robert Marko
93ae4353cd
mac80211: add ath11k PCI support
ath11k is the upstream driver for Qualcomm 802.11ax radios, both for the
internal AHB and PCI based cards.
This commit does however only provide PCI support while AHB will follow
but its SoC specific so it will require an OpenWrt target first.

It differs a bit from ath10k as it requires stuff like QRTR, MHI and QMI
helpers.

PCI variant requires qrtr-mhi and mhi-bus which backports do provide,
however we are dropping those in a patch as they will conflict with
support for the AHB variant as that one requires qrtr-smd which in turn
requires RPMSG and GLINK and its not feasable to provide those in
backports as they are really SoC specific.

QRTR and MHI in kernel 5.10 are not usable and backporting the changes
is not easy as they have changed drastically from 5.10 to 5.15 ath11k will
only be available on targets that use kernel 5.15.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2022-12-19 01:01:57 +01:00