Commit Graph

362 Commits

Author SHA1 Message Date
Daniel Golle
83672f506d
sunxi: add testing Linux 5.10
Add testing Linux kernel 5.10 for sunxi targets.

Removed patches were replaced by upstream commits:

- 410-v5.6-arm64-dts-allwinner-a64-olinuxino-Add-bank-supply-re.patch
   f0c3b29f56f0a arm64: dts: allwinner: a64: olinuxino: Add bank supply regulators

- 420-v5.7-arm64-dts-allwinner-a64-olinuxino-add-user-red-LED.patch
   89866b2667e0d arm64: dts: allwinner: a64: olinuxino: add user red LED

- 440-add-h6-pwm.patch
   a7fe985633f92 pwm: sun4i: Add an optional probe for reset line
   b8d74644f34a8 pwm: sun4i: Prefer "mod" clock to unnamed
   5b090b430d750 pwm: sun4i: Add an optional probe for bus clock
   fa4d81784681a pwm: sun4i: Always calculate params when applying new parameters
   9f28e95b5286f pwm: sun4i: Add support to output source clock directly
   fdd2c12e3761f pwm: sun4i: Add support for H6 PWM

- 441-arm64-dts-add-PWM-node.patch
   88432f5f8469b arm64: dts: allwinner: h6: Add PWM node

- 443-board-h6-orangepioneplus-fix-missing-ethernet.patch
   7ee32a17e0d65 arm64: dts: allwinner: h6: orangepi-one-plus: Enable ethernet

Run tested on friendlyarm,nanopi-neo (allwinner,sun8i-h3), looks all good.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-09-15 19:11:44 +01:00
Daniel Golle
47b531de32
sunxi: bring up DSA b53 switch on Lamobo R1
Build cortexa7 subtarget with DSA driver for MDIO-connected Broadcom
BCM53xxx switches. This is needed for the Lamobo R1 aka. BananaPi
BPi-R1 board which comes with such a switch IC.

Remove old swconfig driver from target kernel config as the only board
using it is now supported by the DSA driver.

No changes to device tree are needed as upstream DTS already got a
DSA switch definition and we are just using that upstream source.

Update default network config of the Lamobo R1 to create lan bridge
with all 4 lan ports.

Introduce DEVICE_COMPAT_VERSION for the board to inform users about
having the re-create their network configuration and add device alias
as Bananapi BPi-R1 while at it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-09-15 19:11:29 +01:00
Zhao Yu
3d4867addf sunxi: enable MUSB in A7 subtarget
like commit 78c1ed6. Without this,Some USB port on H3 baseboard
can' work. So, need enable MUSB support on this target.

Signed-off-by: Zhao Yu <574249312@qq.com>
2021-09-13 18:36:15 +02:00
Rui Salvaterra
505b7a2d08 kernel: move two symbols to the generic kconfigs
CONFIG_RCU_{NEED_SEGCBLIST,STALL_COMMON} are set basically everywhere. Move them
to the generic kconfigs. And resort the generic kconfigs while at it.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-29 17:07:19 +02:00
Josef Schlehofer
ff2bb16730 linux-firmware: update to version 20210315 and trim down broadcom FW
In there linux-firmware repository located in kernel, there were removed old
broadcom firmware [1] as they seem to be likely vulnerable to KrØØk vulnerability
(CVE-2019-15126), because Cypress released new versions and superseded
by it.

In OpenWrt, there is Makefile for cypress-firmware, which already provides
the same named packages like it was in linux-firmware. For example, cypress-firmware-43455-sdio
provides brcmfmac-firmware-43455-sdio [2].

Changelog between 2020118 and 20210315:
3568f96 (tag: 20210315) linux-firmware: Update firmware file for Intel Bluetooth AX210
9e96e50 linux-firmware: Update firmware file for Intel Bluetooth AX200
c8d0db5 linux-firmware: Update firmware file for Intel Bluetooth AX201
5e2a387 Merge tag 'iwlwifi-fw-2021-03-05-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware into main
b0d3e31 rtw88: 8822c: Update normal firmware to v9.9.6
5a2fd63 iwlwifi: add new FWs from core59-66 release
4f54906 iwlwifi: update 9000-family firmwares
11b7607 iwlwifi: update 7265D firmware
e425f76 Merge branch 'add-silabs-wf200' of github.com:jerome-pouiller/linux-firmware into main
5ecd13f Mellanox: Add new mlxsw_spectrum firmware xx.2008.2406
58fb90a linux-firmware: add frimware for mediatek bluetooth chip (MT7921)
e576a1b rtw89: 8852a: add firmware v0.9.12.2
048a7cb WHENCE: add missing symlink for BananaPi M3
aa6c6e7 Add symlink for BananaPi M2 to brcmfmac43430-sdio config
58825f7 brcm: Fix Raspberry Pi 4B NVRAM file
520f71b silabs: add new firmware for WF200
f7915a0 amdgpu: add initial firmware for green sardine
80cb579 rtw88: RTL8822C: Update normal firmware to v9.9.5
b79d239 (tag: 20210208) Merge branch 'DG1-guc-huc-ADLS-dmc' of git://anongit.freedesktop.org/drm/drm-firmware into main
66970e1 Merge branch 'qcom-rb5' of https://github.com/lumag/linux-firmware into main
cf6fc2b Mellanox: Add new mlxsw_spectrum firmware xx.2008.2304
391fd50 linux-firmware: add firmware for MT7921
c5e3240 rtw88: RTL8821C: Update firmware to v24.8
d33d2d8 linux-firmware: Update firmware file for Intel Bluetooth AX210
3027ae4 linux-firmware: Update firmware file for Intel Bluetooth AX200
13979c3 linux-firmware: Update firmware file for Intel Bluetooth AX201
348d8a9 i915: Add DMC v2.01 for ADL-S
f33f1f7 i915: Add HuC v7.7.1 for DG1
6a422f5 i915: Add GuC v49.0.1 for DG1
df822a8 qcom: Add venus firmware files for VPU-1.0
11a1db1 qcom: Add SM8250 Compute DSP firmware
e55248b qcom: Add SM8250 Audio DSP firmware
da74cc6 qcom: add firmware files for Adreno a650
0578970 brcm: Link RPi4's WiFi firmware with DMI machine name.
d528862 brcm: Add NVRAM for Vamrs 96boards Rock960
870b805 brcm: Update Raspberry Pi 3B+/4B NVRAM for downstream changes
a28a590 cypress: Fix link direction
060ad8b cypress: Link the new cypress firmware to the old brcm files
0f0aefd brcm: remove old brcm firmwares that have newer cypress variants
f580dc2 rtl_bt: Update RTL8822C BT(UART I/F) FW to 0x059A_25CB
7df2220 rtl_bt: Update RTL8822C BT(USB I/F) FW to 0x099a_7253
e79405d rtl_bt: Add firmware and config files for RTL8852A BT USB chip
ef3813d rtl_bt: Update RTL8821C BT(USB I/F) FW to 0x829a_7644
646f159 (tag: 20201218) make AP6212 in bananpi m2 plus/zero work
28185ec linux-firmware: Update firmware file for Intel Bluetooth AX210
23da869 linux-firmware: Update firmware file for Intel Bluetooth AX200
2099248 linux-firmware: Update firmware file for Intel Bluetooth AX201
94de5e2 linux-firmware: Update firmware file for Intel Bluetooth 9560
27a3689 linux-firmware: Update firmware file for Intel Bluetooth 9260
5c3c4af Merge branch 'lt9611uxc' of https://github.com/lumag/linux-firmware into main
aaed4a8 Merge branch 'v1.1.6' of https://github.com/irui-wang/linux_fw_vpu_v1.1.6 into main
d8c9865 Merge branch 'master' of https://github.com/sampnimm/linux-firmware-BT into main
63ab3db linux-firmware: add firmware for Lontium LT9611UXC DSI to HDMI bridge
0fe0fe0 mediatek: update MT8173 VPU firmware to v1.1.6
1a08ec9 QCA : Updated firmware files for WCN3991
7455a36 Merge branch 'guc_v49' of git://anongit.freedesktop.org/drm/drm-firmware into main
7eb7fda linux-firmware: Update firmware file for Intel Bluetooth AX210
5cbf459 linux-firmware: Update firmware file for Intel Bluetooth AX210
c487f7d i915: Add GuC firmware v49.0.1 for all platforms
d9ffb07 i915: Remove duplicate KBL DMC entry
b362fd4 Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018
bc9cd0b linux-firmware: Update AMD SEV firmware
54c797a amdgpu: add sienna cichlid firmware for 20.45
1340e9c amdgpu: update vega20 firmware for 20.45
b260c9c amdgpu: update vega12 firmware for 20.45
d683bd5 amdgpu: update vega10 firmware for 20.45
7c81cc2 amdgpu: update renoir firmware for 20.45
3619e57 amdgpu: update navi14 firmware for 20.45
68ce0fb amdgpu: update navi12 firmware for 20.45
e889b80 amdgpu: update navi10 firmware for 20.45
f4edc15 amdgpu: update raven2 firmware for 20.45
e71210f amdgpu: update raven firmware for 20.45

[1] https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=0f0aefd733f70beae4c0246edbd2c158d5ce974c

[2] eeda8652f1/package/firmware/cypress-firmware/Makefile (L124)

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2021-06-06 00:26:13 +02:00
John Audia
79fdd68103 kernel: bump 5.4 to 5.4.112
Ran update_kernel.sh in a fresh clone without any existing toolchains.

Removed upstreamed:
  mvebu/patches-5.4/319-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch

Build system : x86_64
Build-tested : ipq806x/R7800
Run-tested   : ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
2021-04-17 21:50:08 +02:00
Zoltan HERPAI
9aa66b8ce7 sunxi: add support for Banana Pi M2 Berry
CPU: Allwinner V40 quad-core Cortex A7 @ 1.2GHz
Memory: 1GB DDR3
Storage: SDcard, native SATA
Network: 10/100/1000M ethernet, Ampak AP6212 wifi + BT
USB: 4x USB 2.0

Installation:
Use the standard sunxi installation to an SD-card.

While the board is very similar to the M2 Ultra board
(the V40 is the automotive version of the R40), as both
the u-boot and kernel supports them separately, and some
pins are different, let's add a separate device spec.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-04-12 14:02:02 +02:00
Zoltan HERPAI
3225241c2b sunxi: add support for H6 boards and OrangePiOnePlus
Specifications:

SoC	Allwinner H6 @ 1.8 Ghz
DRAM	1Gb LPDDR3
Power	DC 5V @ 3A
Video	HDMI (Type 2.0A - full)
Audio	HDMI, on-board microphone
Network	10/100/1000Mbps Ethernet (Realtek RTL8211)
Storage	microSD
USB	1 USB2.0 Host, 1 USB2.0 OTG
Debug	Serial UART

Flashing instructions:
 Standard sunxi SD card installation procedure - copy image to SD card,
 insert into SD card slot on the device and boot.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-04-11 23:14:55 +02:00
Zoltan HERPAI
a24bb17fa3 sunxi: disable LPAE on cortexa8
LPAE should be disabled as the Cortex-A8 cores don't support it,
and the kernel will crash on boot if it's enabled.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-04-10 23:58:16 +02:00
Zoltan HERPAI
bb9915407b sunxi: enable wifi module on Pine64 boards
The Pine64(+) and the SoPine64 baseboard has an optional BT+WiFi
module, carrying an RTL8723BS. The wifi part is connected via
SDIO, the BT part is connected via UART. The BT part requires
additional code changes in the drivers so we'll skip that until 5.10.
Aside from a DTS patch to enable the wifi module, add the required
packages into the device definitions.

[    8.996970] RTL8723BS: module init start
[    9.000922] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[    9.007965] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[    9.014785] pnetdev = 000000009bdd5000
[    9.047780] RTL8723BS: rtw_ndev_init(wlan0)
[    9.053349] RTL8723BS: module init ret =0

root@OpenWrt:/# iw list
Wiphy phy0
        wiphy index: 0
        max # scan SSIDs: 9
        max scan IEs length: 2304 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * monitor
        Band 1:
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (20.0 dBm)
                        * 2442 MHz [7] (20.0 dBm)
                        * 2447 MHz [8] (20.0 dBm)
                        * 2452 MHz [9] (20.0 dBm)
                        * 2457 MHz [10] (20.0 dBm)
                        * 2462 MHz [11] (20.0 dBm)
                        * 2467 MHz [12] (20.0 dBm) (no IR)
                        * 2472 MHz [13] (20.0 dBm) (no IR)
                        * 2484 MHz [14] (20.0 dBm) (no IR)

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-03-29 21:44:34 +02:00
Zoltan HERPAI
78c1ed64fa sunxi: enable MUSB in A53 subtarget
The Pine64(+) and the SoPine64 baseboard has two USB ports. One of
these (the lower) is connected directly to a USB host, the other
one's (upper) PHY is shared with the separate OTG controller. In
order to get it working, MUSB support needs to be enabled.

As there are other targets which compile MUSB support into the kernel
and not package it into modules, the same is done here.

[    1.348760] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.357029] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.364250] usb usb5: Product: MUSB HDRC host driver
[    1.369219] usb usb5: Manufacturer: Linux 5.4.99 musb-hcd
[    1.374617] usb usb5: SerialNumber: musb-hdrc.1.auto
[    1.379891] hub 5-0:1.0: USB hub found
[    1.383677] hub 5-0:1.0: 1 port detected
[...]
[  697.299440] usb 1-1: new high-speed USB device number 2 using ehci-platform
[  697.461855] usb 1-1: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[  697.470038] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  697.477180] usb 1-1: Product: USB Flash Disk

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-03-29 21:28:27 +02:00
Adrian Schmutzler
85b1f4d8ca treewide: remove execute bit and shebang from board.d files
So far, board.d files were having execute bit set and contained a
shebang. However, they are just sourced in board_detect, with an
apparantly unnecessary check for execute permission beforehand.

Replace this check by one for existance and make the board.d files
"normal" files, as would be expected in /etc anyway.

Note:

This removes an apparantly unused '#!/bin/sh /etc/rc.common' in
target/linux/bcm47xx/base-files/etc/board.d/01_network

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-06 11:30:06 +01:00
Jason A. Donenfeld
196f3d586f kernel-5.4: bump to 5.4.102 and refresh patches
5.4.102 backported a lot of stuff that our WireGuard backport already
did, in addition to other patches we had, so those patches were
removed from that part of the series. In the process other patches were
refreshed or reworked to account for upstream changes.

This commit involved `update_kernel.sh -v -u 5.4`.

Cc: John Audia <graysky@archlinux.us>
Cc: David Bauer <mail@david-bauer.net>
Cc: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2021-03-04 22:06:53 +01:00
Adrian Schmutzler
7157c77c6d target: use SPDX license identifiers on scripts
Use SPDX license tags to allow machines to check licenses.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 15:47:23 +01:00
Adrian Schmutzler
598b29585e target: use SPDX license identifiers on Makefiles
Use SPDX license tags to allow machines to check licenses.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 15:47:18 +01:00
Jiang Yongquan
799fca7602 sunxi: add support for linksprite pcDuino3 nano board
Specifications:

 - SoC: Allwinner A20 @ 1Ghz
 - DRAM: 1GiB DDR3 @ 408MHz (K4B4G1646Q-HYK0)
 - NAND: 4GB MLC NAND (H27UBG8T2BTR-BC)
 - Ethernet: 10/100/1000Mbps Ethernet (Realtek RTL8211E)

Flash instructions:

dd if=openwrt-sunxi-cortexa7-linksprite_pcduino3-nano-ext4-sdcard.img
of=/dev/sdX

Signed-off-by: Jiang Yongquan <woxwchc@foxmail.com>
[Remove CONFIG_REALTEK_PHY from sunxi/cortexa53 config]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-01-27 23:14:30 +01:00
Tony Ambardar
0faa172356 config: limit CONFIG_PERF_EVENTS to top-level generic configs
Remove redundant target-level settings.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-01-25 14:37:41 +01:00
Adrian Schmutzler
f52081bcf9 treewide: provide global default for SUPPORTED_DEVICES
The majority of our targets provide a default value for the variable
SUPPORTED_DEVICES, which is used in images to check against the
compatible on a running device:

  SUPPORTED_DEVICES := $(subst _,$(comma),$(1))

At the moment, this is implemented in the Device/Default block of
the individual targets or even subtargets. However, since we
standardized device names and compatible in the recent past, almost
all targets are following the same scheme now:

  device/image name:  vendor_model
  compatible:         vendor,model

The equal redundant definitions are a symptom of this process.

Consequently, this patch moves the definition to image.mk making it
a global default. For the few targets not using the scheme above,
SUPPORTED_DEVICES will be defined to a different value in
Device/Default anyway, overwriting the default. In other words:
This change is supposed to be cosmetic.

This can be used as a global measure to get the current compatible
with: $(firstword $(SUPPORTED_DEVICES))
(Though this is not precisely an achievement of this commit.)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-01-23 12:45:21 +01:00
Sungbo Eo
583e39e3d5 kernel: drop empty kmod-ledtrig-* packages
The following four led triggers are enabled in generic config.

* kmod-ledtrig-default-on
* kmod-ledtrig-heartbeat
* kmod-ledtrig-netdev
* kmod-ledtrig-timer

Drop the packages and remove them from DEVICE_PACKAGES.
There's no other package depending on them in this repo.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2021-01-15 18:24:31 +01:00
Roman Kuzmitskii
02e8182d87 sunxi: add support for Libre Computer ALL-H3-CC H5
Specification:

- CPU: Allwinner H5, Quad-core Cortex-A53 Up to 1GHz
- DDR3 RAM: 2GB
- Network:
    10/100M Ethernet x 1
- IR: x1 (Receive)
- USB (Host) Type-A x3
- USB (OTG) Type-A x1
- MicroSD Slot x 1
- eMMC Slot x1
- MicroUSB power input
- GPIO 40pin header
- UART 3pin header
- Leds:
    - librecomputer:blue:status
    - librecomputer:green:pwr
- Buttons:
    - uboot button (used to enter fel mode)
    - power button (can trigger power on)
- Power Supply via MicroUSB or GPIO 5V/2A

Installation:

- Write the image to SD Card with dd
- Boot from the SD Card

Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
[Fixed Signed-off-by]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-12 18:21:17 +01:00
Piotr Jurkiewicz
75401550c3 sunxi: fix board.d/01_leds permissions and drop include
The file lacks executable permissions, which makes it not being applied
during the first boot.

While at it, drop unneeded include.

Signed-off-by: Piotr Jurkiewicz <piotr.jerzy.jurkiewicz@gmail.com>
[do not touch board name handling, update commit message/title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-12 17:18:26 +01:00
Adrian Schmutzler
2785126650 kernel: remove support for kernel 4.19
We use 5.4 on all targets by default, and 4.19 has never been released
in a stable version. There is no reason to keep it.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-30 19:29:59 +01:00
Jayantajit Gogoi
e6d9f6fdff sunxi: add support for FriendlyARM NanoPi R1
Specification:

- CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
- DDR3 RAM: 512MB/1GB
- Network:
    10/100/1000M Ethernet x 1,
    10/100M Ethernet x 1
- WiFi: 802.11b/g/n, with SMA antenna interface
- USB Host: Type-A x2
- MicroSD Slot x 1
- MicroUSB: for OTG and power input
- Debug Serial Port: 3Pin 2.54mm pitch pin-header
- LED:
    nanopi:red:status
    nanopi:green:wan
    nanopi:green:lan
- KEY:
    reset
- Power Supply: DC 5V/2A

Installation:

- Write the image to SD Card with dd
- Boot NanoPi from the SD Card

Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
2020-10-18 15:46:42 +02:00
Adrian Schmutzler
3679f8f933 sunxi: use wpad-basic-wolfssl for Sinovoip Banana Pi M2 Ultra
The idea of commit a14f5bb4bd was to use wpad-basic-wolfssl
consistently throughout the whole trunk, so use it here as well.

Fixes: 50fdddae05 ("BPi-M2U kernel modules for onboard WiFi")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-15 17:46:54 +02:00
Rui Salvaterra
e788e9bd87 treewide: enable the vDSO
The vDSO is used to accelerate some syscalls. It should work fine wherever it's
available, so enable it globally for all targets.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2020-10-13 20:08:41 +02:00
Hal Martin
0830ae3a2f sunxi: Correct manufacturer name to Sinovoip
Sinovoip is the manufacturer of the BPi-M2U:
http://www.banana-pi.org/m2u.html

Signed-off-by: Hal Martin <hal.martin@gmail.com>
2020-10-11 20:27:20 +02:00
Hal Martin
50fdddae05 sunxi: BPi-M2U kernel modules for onboard WiFi
Signed-off-by: Hal Martin <hal.martin@gmail.com>
2020-10-11 20:27:14 +02:00
Arturas Moskvinas
679db02b10 sunxi: add support for FriendlyArm Zeropi
Specification

    CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
    DDR3 RAM: 256MB/512MB
    Connectivity: 10/100/1000Mbps Ethernet
    USB Host: Type-A x 1
    MicroSD Slot x 1
    MicroUSB: for power input only
    Debug Serial Port: 4Pin, 2.54 mm pitch pin header
    Power Supply: DC 5V/2A
    PCB Dimension: 40 x 40 x 1.2mm

Installation:

    Burn the image file to an SD Card with dd or any image burning tool
    Boot ZeroPi from the SD Card

The following features are working and tested:

    Ethernet port 10/100/1000M Ethernet

Remarks: SBC is mostly compatible and boots with FriendlyARM NanoPI M1 plus DTS also (zeropi has no working hdmi)

Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
2020-10-11 18:29:26 +02:00
Andre Heider
37e62ec4ec sunxi: add a kmod package for sun4i_spdif
Tested on a A20 board:
$ cat /proc/asound/cards
 0 [SPDIF          ]: On-board_SPDIF - On-board SPDIF
                      On-board SPDIF

Size of the module for a 32bit kernel:
60708 linux-5.4.66/sound/soc/sunxi/sun4i-spdif.ko

Signed-off-by: Andre Heider <a.heider@gmail.com>
2020-10-11 17:45:02 +02:00
Andre Heider
4943d3f14b sunxi: add SND_SIMPLE_CARD to kernel config
This is required to expose an ALSA card for quite some boards:

$ git grep -l simple-audio-card \
	arch/arm/boot/dts/sun?i* \
	arch/arm64/boot/dts/allwinner/*

arch/arm/boot/dts/sun4i-a10-a1000.dts
arch/arm/boot/dts/sun5i-gr8-evb.dts
arch/arm/boot/dts/sun6i-a31-i7.dts
arch/arm/boot/dts/sun6i-a31s-sina31s.dts
arch/arm/boot/dts/sun7i-a20-cubietruck.dts
arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
arch/arm/boot/dts/sun8i-a33-olinuxino.dts
arch/arm/boot/dts/sun8i-a33.dtsi
arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

The compressed 32bit kernel increases less than 1K:
Before: 3230768 zImage
After:  3231664 zImage

Signed-off-by: Andre Heider <a.heider@gmail.com>
2020-10-11 17:45:02 +02:00
Hauke Mehrtens
722906d144 kernel: move CONFIG_F2FS_CHECK_FS to generic kernel config
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-10-11 16:38:16 +02:00
Hauke Mehrtens
6542615e41 kernel: Move CONFIG_F2FS_FS_SECURITY to generic kernel config
Move the CONFIG_F2FS_FS_SECURITY kernel configuration option to the
generic kernel configuration.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-10-11 16:38:16 +02:00
Daniel Golle
5423d9d27e kernel: move F2FS_FS_XATTR and F2FS_STAT_FS symbols to generic
Similar to how it was already done for other filesystems' *_FS_XATTR
kernel config symbols, also move CONFIG_F2FS_FS_XATTR=y and
CONFIG_F2FS_STAT_FS=y to target/linux/generic.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-09 23:20:19 +01:00
Paul Spooren
0f5b5cf730 kernel: clean up XATTR config symbols
Extended attributes are required for overlayfs and have hence been long
ago enabled for jffs2, but should be enabled unconditionally for all
other filesystems which may potentially serve as overlayfs' upper
directory. Previously it was inconsistently added in multiple targets.
Add symbols to generic kernel config and remove all *_XATTR symbols
from target configs.

Signed-off-by: Paul Spooren <mail@aparcar.org>
[keep things as they are for squashfs, improve commit message]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-09 01:49:22 +01:00
Petr Štetiar
a14f5bb4bd treewide: use wpad-basic-wolfssl as default
In order to support SAE/WPA3-Personal in default images. Replace almost
all occurencies of wpad-basic and wpad-mini with wpad-basic-wolfssl for
consistency. Keep out ar71xx from the list as it won't be in the next
release and would only make backports harder.

Build-tested (build-bot settings):
ath79: generic, ramips: mt7620/mt76x8/rt305x, lantiq: xrx200/xway,
sunxi: a53

Signed-off-by: Petr Štetiar <ynezz@true.cz>
[rebase, extend commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-20 14:19:39 +02:00
Adrian Schmutzler
d4ac0ad543 treewide: make dependency on kmod-usb-net selective
A bunch of kernel modules depends on kmod-usb-net, but does not
select it. Make AddDepends/usb-net selective, so we can drop
some redundant +kmod-usb-net definitions for DEVICE_PACKAGES.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-10 12:54:30 +02:00
Felix Fietkau
b0f7ea2853 kernel: unify CONFIG_GPIO_SYSFS in kernel configs
Enable it for all platforms

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-08-06 12:37:04 +02:00
Adrian Schmutzler
356866c481 target: replace remaining occurrences of ifconfig with ip
ifconfig is effectively deprecated for quite some time now. Let's
replace the remaining occurrences for our target setup by the
corresponding ip commands now.

Note that this does not touch ar71xx, as it will be dropped anyway,
and changing it would only make backports harder.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-03 10:42:04 +02:00
Rogan Dawes
9c85153b87 sunxi: add text referencing Allwinner H3 and H5 CPUs
This makes it a little easier to figure out which options to choose.

Signed-off-by: Rogan Dawes <rogan@dawes.za.net>
2020-06-27 00:19:13 +02:00
Adrian Schmutzler
bb39fea11a treewide: simplify inclusion of subtarget image files
Many target use a repetitive if-include scheme for their subtarget
image files, though their names are consistent with the subtarget
names.

This patch removes these redundant conditions and just uses the
variable for the include where the target setup allows it.

For sunxi, this includes a trivial rename of the subtarget image
Makefiles.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-11 01:44:13 +02:00
Adrian Schmutzler
0fb5962e62 sunxi: remove unneeded shebang for preinit files
preinit files are sourced and they have no execute bit set, so remove
their shebang.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-05 13:09:19 +02:00
Adrian Schmutzler
755790808c sunxi: tidy up cases in base-files
This removes unnecessary quotes in cases and applies alphabetic
order to members.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-05 13:06:26 +02:00
Petr Štetiar
5ecc0cfd6f kernel: bump 5.4 to 5.4.28
Changelog since 5.4.24 mentions CVE-2019-19769, CVE-2020-8648,
CVE-2020-8649 and CVE-2020-8647.

Removed upstreamed:

 generic: 507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch
 generic: 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch
 bcm27xx: 950-0435-ASoC-pcm512x-Fix-unbalanced-regulator-enable-call-in.patch
 ipq806x: 701-stmmac-fix-notifier-registration.patch
 lantiq: 002-pinctrl-falcon-fix-syntax-error.patch
 octeontx: 0002-net-thunderx-workaround-BGX-TX-Underflow-issue.patch

Run tested: apu2, qemu-x86-64, apalis, a64-olinuxino, nbg6617
Build tested: sunxi/a53, imx6, x86/64, ipq40xx

Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Petr Štetiar
c3178110b5 sunxi: switch to 5.4 kernel
Seems to be working fine on my a64-olinuxino, it's 99.9% upstream stuff
anyway. Lets start wider userbase testing.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Petr Štetiar
153a6b8c34 sunxi: a53: fix ethernet on a64-olinuxino
a64-olinuxino board has Micrel KSZ9031 Gigabit PHY so add support for
this PHY into kernel.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Petr Štetiar
8ac614fe96 sunxi: 5.4: dts: a64: olinuxino: add bank supply regulators
This is backport of v5.6 patch.

Allwinner A64 SoC has separate supplies for PC, PD, PE, PG and PL. This
patch adds regulators for them to the pinctrl node.

Exception is PL which is used by the RSB bus. To avoid circular
dependencies, VCC-PL is omitted.

On boards with eMMC, VCC-PC is supplied by ELDO1, instead of DCDC1.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Petr Štetiar
8743a9c9b9 sunxi: 5.4: a64-olinuxino: use red LED for status signalization
There is a red LED marked as `GPIO_LED1` on the silkscreen and connected
to PE17, so use this LED for status signalization.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Petr Štetiar
0784d07c11 sunxi: a53: add support for Olimex A64-Olinuxino eMMC
Specifications:

 SoC: Allwinner A64 (1.2 GHz Quad-Core ARM Cortex-A53 64-bit)
 RAM: 1GB or 2GB RAM DDR3L @ 672Mhz
 Flash: 0/4/16GB eMMC flash memory for storage and boot
 MicroSD card connector for cards up to 32GB
 Debug: serial UART debug header with 0.1" pins
 Wired connectivity: 10/100/1000Mbps GbE Ethernet
 Wireless connectivity: on-board RTL8723BS 1T1R 802.11bgn WiFi and
                        Bluetooth 4.0 module with built-in antenna
                        (only available in the A64-OLinuXino-1G4GW)

Flashing instructions:

 Standard sunxi SD card installation procedure - copy eMMC image to SD
 card, insert in into SD card slot on the device and boot. You should see
 something like following if the eMMC is detected correctly:

  mmcblk2: mmc2:0001 P1XXXX 3.60 GiB
  mmcblk2boot0: mmc2:0001 P1XXXX partition 1 16.0 MiB
  mmcblk2boot1: mmc2:0001 P1XXXX partition 2 16.0 MiB

 Then flash SD card eMMC image straight into the mmcblk2 device:

  dd if=/mnt/openwrt...a64-olinuxino-emmc-squashfs-sdcard.img of=/dev/mmcblk2

 It also possible to boot from boot0 partition[1]:

  1. Compile U-Boot with CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x40
     otherwise the U-Boot will get stuck in bootloop
  2. Configure eMMC to boot from boot0 partition inside U-Boot:

     mmc bootbus 1 1 0 0; mmc partconf 1 1 1 0

  3. echo 0 > /sys/block/mmcblk2boot0/force_ro
  4. Write U-Boot from offset 0 (not offset 8k as with SD card) into
     boot0 partition

     dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk2boot0

Known issues:

 Wireless doesn't work properly via netifd.

1. https://linux-sunxi.org/index.php?title=Bootable_eMMC

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Petr Štetiar
c31954f1cf sunxi: a53: add support for Olimex A64-Olinuxino
Specifications:

 SoC: Allwinner A64 (1.2 GHz Quad-Core ARM Cortex-A53 64-bit)
 RAM: 1GB or 2GB RAM DDR3L @ 672Mhz
 Flash: 0/4/16GB eMMC flash memory for storage and boot
 MicroSD card connector for cards up to 32GB
 Debug: serial UART debug header with 0.1" pins
 Wired connectivity: 10/100/1000Mbps GbE Ethernet
 Wireless connectivity: on-board RTL8723BS 1T1R 802.11bgn WiFi and
                        Bluetooth 4.0 module with built-in antenna
                        (only available in the A64-OLinuXino-1G4GW)

Flashing instructions:

 Standard sunxi SD card installation procedure - copy image to SD card,
 insert in into SD card slot on the device and boot.

Known issues:

 Wireless doesn't work properly via netifd.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Petr Štetiar
5217aa78f1 sunxi: a53: image: make it DRY
Replace same copy&pasted lines with the appropriate reusable bits.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00