Kuan-Yi Li
f1525e785e
kernel: backport GD25Q256 support from 4.15
...
Backport below changes for GigaDevice GD25Q256 support from v4.15:
e27072851bf7 mtd: spi-nor: add a quad_enable callback in struct flash_info
65153846b18c mtd: spi-nor: add support for GD25Q256
This chip is used on newer Quad-E4G boards.
Before:
[ 2.366493] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 19
[ 2.372853] m25p80: probe of spi0.0 failed with error -2
After:
[ 2.371722] m25p80 spi0.0: gd25q256 (32768 Kbytes)
[ 2.376694] 5 fixed-partitions partitions found on MTD device spi0.0
[ 2.383043] Creating 5 MTD partitions on "spi0.0":
[ 2.387824] 0x000000000000-0x000000030000 : "u-boot"
[ 2.394138] 0x000000030000-0x000000031000 : "u-boot-env"
[ 2.400608] 0x000000031000-0x000000040000 : "config"
[ 2.406830] 0x000000040000-0x000000050000 : "factory"
[ 2.413169] 0x000000050000-0x000002000000 : "firmware"
Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2020-12-01 21:59:30 +01:00
Koen Vandeputte
c764b2b531
kernel: bump 4.14 to 4.14.79
...
Refreshed all patches.
Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-05 16:00:00 +01:00
Felix Fietkau
bcf4a5f474
ramips: remove chunked-io patch and set spi->max_transfer_size instead
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-02-24 16:05:28 +01:00
Matthias Schiffer
1abb5c6db1
generic: unlock Winbond flash on boot
...
The underlying issue breaking Spansion flash has been fixed with "mtd: spi-nor:
wait until lock/unlock operations are ready" and "mtd: spi-nor: wait for SR_WIP
to clear on initial unlock", so we can support unlocking for Winbond flash
again.
This is necessary to have writable flash on certain UBNT devices with some
bootloader versions.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-11 11:51:07 +01:00
