Commit Graph

17932 Commits

Author SHA1 Message Date
Daniel Golle
578c73fea3
uboot-mediatek: select matching U-Boot for board
Instead of building all U-Boot variants by default, build only those
needed by the selected board(s).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 22:00:05 +00:00
Tony Ambardar
95a3741d17 kernel: support new mdio_devres.ko module in 5.10
Add kmod-mdio-devres package and kernel config symbol, and update related
kmod-r8169 and kmod-ixgbe package dependencies.

Build tested module dependencies on x86/64 with CONFIG_ALL_KMODS=y.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-14 17:52:49 +00:00
Hauke Mehrtens
e6ba970b6e realtek: Add ZyXEL GS1900-8
The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or
SFP ports, but otherwise similar to the other GS1900 switches.

Specifications
--------------
* Device:    ZyXEL GS1900-8 v1.2
* SoC:       Realtek RTL8380M 500 MHz MIPS 4KEc
* Flash:     Macronix MX25L12835F 16 MiB
* RAM:       Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM
* Ethernet:  8x 10/100/1000 Mbit
* LEDs:      1 PWR LED (green, not configurable)
             1 SYS LED (green, configurable)
             8 ethernet port status LEDs (green, SoC controlled)
* Buttons:   1 on-off glide switch at the back (not configurable)
             1 reset button at the right side, behind the air-vent
               (not configurable)
             1 reset button on front panel (configurable)
* Power      12V 1A barrel connector
* UART:      1 serial header (JP2) with populated standard pin connector on
             the left side of the PCB, towards the back. Pins are labelled:
             + VCC (3.3V)
             + TX (really RX)
             + RX (really TX)
             + GND
             the labelling is done from the usb2serial connector's point of
             view, so RX/ TX are mixed up.

Serial connection parameters for both devices: 115200 8N1.

Installation
------------
Instructions are identical to those for the GS1900-10HP and GS1900-8HP.

* Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10).
* Set up a TFTP server on your client and make it serve the initramfs
  image.
* Connect serial, power up the switch, interrupt U-boot by hitting the
  space bar, and enable the network:
  > rtk network on
* Since the GS1900-10HP is a dual-partition device, you want to keep the
  OEM firmware on the backup partition for the time being. OpenWrt can
  only boot off the first partition anyway (hardcoded in the DTS). To
  make sure we are manipulating the first partition, issue the following
  commands:
  > setsys bootpartition 0
  > savesys
* Download the image onto the device and boot from it:
  > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin
  > bootm
* Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it:
  > sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-14 15:07:30 +01:00
Dominick Grift
41a8f093fb selinux-policy: update to version v0.8
3d7da7a igmpproxy tidy some loose ends
c84ba0f rcigmpproxy: add entries to /etc when creating /etc/igmpproxy.conf
5a18967 adds igmpproxy skeleton
7e6a218 logread: support resolving dns names
e39ca8b netifd: add support for /etc/udhcpc.user
7952bd0 odhcp6c: support /etc/odhcp6c.user
ba0eb4e swconfig, fwenv, agent
4556b8a pppd cosmetic
9324d9d pppd: sends AT commands to model using /dev/ttyUSBN
417b14a ttydev: add some more ttyUSB
ed739dc example: dont depend on policycoreutils
97613f9 dropbear: using dropbear as scp: dns name resolving
12c193b dropbear tcp connect ssh ports for scp
c050077 rcdnsmasq: remove redundant rule and make rcsysntpd optional
8c5de35 this is a bug
8d5c463 uhttpd rcboot rcdnsmasq
094266e hostapd and wpa_supplicant
aef0bd7 mountroot: maintains /tmp/sysupgrade.tar
24f0406 dropbear: allow it to read tmp.fs files
2901433 firstboot mkfsf2fs rcboot
2c4afb7 blockmount mmc
465ca98 adds industrial i/o (iio) nodedev
82f686e mtd stordev: back that ubiblock0_4p1 up with a filecon
7df78bd ubus: "support" older ubusd versions that run as root
4458bce swconfig: allow using terminal (to print output)
e8d606d sslcert: openssl linked: this shaves off 200 bytes
93afffb jshn ntpdhotplug
0b847f0 wpad: reads /etc/ssl/openssl.cnf
f14ee34 indent fix
a0c7cad mtd, uhttpd, ubus and ntpdhotplug
d74f98f adds a not about checkreqprot requirement in some scenarios
affacce example: add policycoreutils-setfiles for make check
4f944dc kmodloader and fwenv:
efe36a3 netifd: adds a comment/reminder
581b087 more fw_printenv loose ends
30177a4 fw_setenv: needs mtd write access to set and delete env
da28f4c fw_printenv: some minor clean ups
a062053 fw_printenv missing rules
244ba5f blockmount: extroot and /rwm
0745a6a squid: allow squid to run sslcrtd with domain transition
b851df6 squid fix
8c55acd squid: adds certfile and allow connect http but...
b7c1f6d Makefile: exclude tinyproxy from mintesttgt (using squid)
5ff39bd squid: forgot about luci
5366c97 squid/rcsquid some basic fill in
8743da6 squid skeleton
687a43b adds squid 3128 port to httpproxy port

Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
2021-03-14 12:56:46 +00:00
Tony Ambardar
29e2be69c4 elfutils: remove host build from target package
Commit f4da28c301 ("elfutils: Add host build") supplied a libelf host
library to fix a glib2 host build error, but this need was later removed
by b6212c8769 ("glib2: don't use libelf during host build").

More importantly, there are already two sources for libelf host libraries:
OpenWRT build prerequisites [1] and tools/libelf. A third is not needed.

Ref [1]: https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-13 21:33:22 +00:00
Hannu Nyman
c1f3c52564 busybox: backport fixes for 1.33.0
Backport two fixes for 1.33.0
* history file storing
* traceroute command option parsing

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2021-03-13 21:18:02 +01:00
Daniel Golle
79b6a4bd3c
uboot-mediatek: import fix for AHCI and enable SATA
Import patch form Frank Wunderlich <frank-w@public-files.de> to fix
build of MediaTek AHCI SATA driver.
Enable that driver on Bananapi BPi-R64.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-13 20:16:03 +00:00
Alin Nastac
8704d138df xfrm: simplify the check for necessary kernel support
[ -d /sys/module/xfrm_interface ] is enough to check if
CONFIG_XFRM_INTERFACE support was enabled in kernel.

Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
2021-03-13 20:59:22 +01:00
Alin Nastac
65ca980b48 vti: use alternative way to check if kernel support is enabled
When necessary support is built in kernel, vti protocol support is
not enabled in netifd.

Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
2021-03-13 20:59:11 +01:00
Alin Nastac
8a35ebe375 gre: use alternative way to check if kernel support is enabled
When necessary support is built in kernel, gre protocol support is
not enabled in netifd.

Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
2021-03-13 20:58:55 +01:00
Daniel Golle
997ff740dc
uboot-mediatek: fix build on Mac OS X
Copy patch added to uboot-sunxi by commit 3cc57ba462
("uboot-sunxi: add missing type __u64") also to uboot-mediatek.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-13 13:41:04 +00:00
Daniel Golle
0183ee2eb9
uboot-mediatek: update configs for MT7622 devies
* make sure USB 2.0 works (useful for UEFI-booting eg. memtest86)
 * include more useful U-Boot config options on BPi-R64.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-12 00:18:58 +00:00
Daniel Golle
9dfc2b3ca4
uboot-mediatek: update to 2021.04-rc3 with MediaTek's patches
MediaTek published their current U-Boot patchset on github:
https://github.com/mtk-openwrt/u-boot/commits/mtksoc

Import the platform patches from there (`00-mtk-*.patch`), arrange,
them nicely, drop no longer needed local patches and rebase on top of
U-Boot 2021.04-rc3.

Tested and works well on Linksys E8450 (snand-1ddr) as well as
Bananapi BPi-R64 (sdmmc-2ddr, emmc-2ddr).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-11 16:24:53 +00:00
Daniel Golle
e2cffbb805
arm-trusted-firmware-mediatek: update to 2021-03-10
Most prominently this adds changes which allow replacing the binary-
only 'bromimage' tool by U-Boot's 'mkimage' (see previous commit).
This fixes build on non-Linux and/or non-x86 platforms.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-11 16:24:48 +00:00
Daniel Golle
ce19e8fa43
tools: mkimage: add patches for 64-bit MediaTek BootROM
Add patches for mkimage to allow using it instead of the binary-only
'bromimage' tool to generate bl2 for MT7622.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-11 16:24:20 +00:00
Daniel Golle
da339a6d3f
rpcd: update to git HEAD
d3f2041 uci: manually clear uci_ptr flags after uci_delete() operations
 ccb7517 sys: packagelist: drop ABI version from package name

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-11 00:39:16 +00:00
Daniel Golle
b5f6d20560
opkg: update to git HEAD
d71856a pkg: pass-through ABIVersion to status file

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-11 00:39:09 +00:00
Rui Salvaterra
130118f7aa netifd: add a udhcpc.user placeholder script
Document the existence of this feature. This allows the user to execute a script
at each DHCPv4 event. This is useful, for example, as an ad-hoc way to update a
DDNS entry when (and only when) required.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-03-10 20:16:22 +01:00
Rui Salvaterra
b4f3d93b5f odhcp6c: add a odhcp6c.user placeholder script
Document the existence of this feature. This allows the user to execute a script
at each DHCPv6 event. This is useful, for example, as an ad-hoc way to update a
DDNS entry when (and only when) required.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-03-10 20:16:06 +01:00
Daniel Golle
bff84f3e8e arm-trusted-firmware-mediatek: fix typo SPI-SNAND -> SPI-NAND
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-08 21:27:35 +00:00
Dominick Grift
49edc4d17f checkpolicy: update to version 3.2
521e6a2f libsepol/cil: fix signed overflow caused by using (1 << 31) - 1
42ae834a libsepol,checkpolicy: optimize storage of filename transitions

Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
2021-03-08 21:27:35 +00:00
Dominick Grift
0b58ebcfe2 secilc: update to version 3.2
49ff851c secilc: fixes cil_role_statements.md example
03881703 secilc/docs: add custom color theme
4c8d6094 secilc/docs: add syntax highlighting for secil
057d72af secilc/docs: use fenced code blocks for cil examples
e8bcdb84 cil_network_labeling_statements: fixes nodecon examples
eefa5511 cil_access_vector_rules: allowx, auditallowx and dontauditx fixes
9e9b8103 secilc/docs: document expandtypeattribute
fbe1e526 Update the cil docs to match the current behaviour.

Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
2021-03-08 21:27:35 +00:00
Dominick Grift
68934a5704 policycoreutils: update to version 3.2
d464187c policycoreutils: sestatus belongs to bin not sbin
d59932a7 policycoreutils: Resolve path in restorecon_xattr
5682c0d5 policycoreutils/fixfiles.8: add missing file systems and merge check and verify
57dd1f65 policycoreutils/setfiles: Drop unused nerr variable
be7f54cb setfiles: drop ABORT_ON_ERRORS and related code
9207823c setfiles: Do not abort on labeling error
c064d214 selinux_config(5): add a note that runtime disable is deprecated
8bc865e1 newrole: support cross-compilation with PAM and audit
ba2d6c10 fixfiles: correctly restore context of mountpoints

Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
2021-03-08 21:27:35 +00:00
Dominick Grift
4670492ad7 libsemanage: update to version 3.2
c35919a7 libsemanage: sync filesystem with sandbox
5b05e829 Revert "libsemanage/genhomedircon: check usepasswd"
edae9275 libsemanage: Free contents of modkey in semanage_direct_remove
ce46daab libsemanage/genhomedircon: check usepasswd
6ebb35d2 libsemanage: Bump libsemanage.so version
c08b73d7 libsemanage: Drop deprecated functions
b46406de libsemanage: Remove legacy and duplicate symbols

Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
2021-03-08 21:27:35 +00:00
Dominick Grift
b1fc2b5b0b libselinux: update to version 3.2
142826a3 libselinux: fix segfault in add_xattr_entry()
398d2cee libselinux: rename gettid() to something which never conflicts with the libc
8f0f0a28 selinux(8,5): Describe fcontext regular expressions
9cc6b5cf libselinux/getconlist: report failures
156dd0de libselinux: update getseuser
e2dca5df libselinux: accept const fromcon in get_context API
da4829d0 libselinux: Always close status page fd
45b15c22 selinux(8): explain that runtime disable is deprecated
3c16aaef selinux(8): mark up SELINUX values
c2a58cc5 libselinux: LABEL_BACKEND_ANDROID add option to enable
db0f2f38 libselinux: Add build option to disable X11 backend
4a142ac4 libsepol: Bump libsepol.so version
d23342a9 libselinux: convert matchpathcon to selabel_lookup()
7ef5b185 libselinux: Change userspace AVC setenforce and policy load messages to audit format.
f5d644c7 libselinux: Add additional log callback details in man page for auditing.
075f9cfe libselinux: Fix selabel_lookup() for the root dir.
a4149e0e libselinux: Add new log callback levels for enforcing and policy load notices.
a63f93d8 libselinux: initialize last_policyload in selinux_status_open()
ef902db9 libselinux: safely access shared memory in selinux_status_updated()
9e4480b9 libselinux: Remove trailing slash on selabel_file lookups.
21fb5f20 libselinux: use full argument specifiers for security_check_context in man page
e7abd802 libselinux: fix build order
05bdc031 libselinux: use kernel status page by default

Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
2021-03-08 21:27:35 +00:00
Dominick Grift
2a1bdde0d0 libsepol: update to version 3.2
a9e0004f libsepol: invalidate the pointer to the policydb if policydb_init fails
6238e025 libsepol/cil: fix NULL pointer dereference in cil_fill_ipaddr
b69d77bc libsepol/cil: handle SID without assigned context when writing policy.conf
0861c659 libsepol: Validate policydb values when reading binary policy
8f5409cf libsepol: Create function ebitmap_highest_set_bit()
0451adeb libsepol/cil: Destroy disabled optional blocks after pass is complete
32f8ed3d libsepol/cil: introduce intermediate cast to silence -Wvoid-pointer-to-enum-cast
4662bdc1 libsepol/cil: be more robust when encountering <src_info>
6b561058 libsepol/cil: fix NULL pointer dereference with empty macro argument
0d0e47c7 libsepol/cil: Fix integer overflow in the handling of hll line marks
1b36ace2 libsepol: include header files in source files when matching declarations
1f1fa9d4 libsepol: uniformize prototypes of sepol_mls_contains and sepol_mls_check
72a88d75 libsepol: remove unused files
eba0ffee libsepol/cil: Fix heap-use-after-free when using optional blockinherit
1048f8d3 libsepol/cil: unlink blockinherit->block link when destroying a block
b3202918 libsepol/cil: fix memory leak when a constraint expression is too deep
f0d98f83 libsepol/cil: Fix heap-use-after-free in __class_reset_perm_values()
5d021d66 libsepol/cil: Update symtab nprim field when adding or removing datums
34bd9a9d libsepol: destroy filename_trans list properly
bdf4e332 libsepol/cil: fix NULL pointer dereference when parsing an improper integer
b7ea65f5 libsepol/cil: destroy perm_datums when __cil_resolve_perms fails
228c06d9 libsepol/cil: fix out-of-bound read in cil_print_recursive_blockinherit
a25d9104 libsepol/cil: constify some strings
e2d01842 libsepol/cil: propagate failure of cil_fill_list()
6c8fca10 libsepol/cil: do not add a stack variable to a list
38a09b74 libsepol/cil: fix NULL pointer dereference when using an unused alias
3c357285 libsepol/cil: remove useless print statement
90809674 libsepol/cil: always destroy the lexer state
d16a1e46 libsepol/cil: Use the macro FLAVOR() whenever possible
2aac859a libsepol/cil: Use the macro NODE() whenever possible
d317b470 libsepol/cil: Remove unnecessary assignment in cil_resolve_name_keep_aliases()
9b9761cf libsepol/cil: Remove unused field from struct cil_args_resolve
e257d4c7 libsepol/cil: Get rid of unnecessary check in cil_gen_node()
ebba2b00 libsepol/cil: cil_tree_walk() helpers should use CIL_TREE_SKIP_*
89dab467 libsepol: free memory when realloc() fails
2d353bd5 libsepol/cil: Give error for more than one true or false block
4a142ac4 libsepol: Bump libsepol.so version
506c7b95 libsepol: Drop deprecated functions
ae58e84b libsepol: Get rid of the old and duplicated symbols
c97d63c6 libsepol: silence potential NULL pointer dereference warning
64387cb3 libsepol: drop confusing BUG_ON macro
521e6a2f libsepol/cil: fix signed overflow caused by using (1 << 31) - 1
a152653b libsepol/cil: Fix neverallow checking involving classmaps
734e4beb libsepol/cil: Validate conditional expressions before adding to binary policy
685f577a libsepol/cil: Validate constraint expressions before adding to binary policy
8206b8cb libsepol: implement POLICYDB_VERSION_COMP_FTRANS
42ae834a libsepol,checkpolicy: optimize storage of filename transitions

Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
2021-03-08 21:27:35 +00:00
Daniel Golle
ffeb37047e
procd: update to git HEAD
945d0d7 utils: fix C style in header file
 2cfc26f inittab: detect active console from kernel if no console= specified

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-08 00:11:55 +00:00
Georgi Valkov
24737d85e8 bpftools: fix param order for install on macOS
Fix: bpftools 5.11.2 does not compile on macOS, because the -m option
was placed between src and dst. Corrected by moving -m 644 before src.

Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
2021-03-07 21:09:01 +00:00
Tony Ambardar
9e64e4ce26 bpftools: fix libbpf pkgconfig file
The pkgconfig file hardcodes a host library directory which cannot be
overridden by OpenWrt during builds. Use SED to fix this and potential
include directory problems, as is done with several other packages.

This fixes a strange issue intermittently seen building iproute2 on the
oxnas target:

iptables modules directory: /usr/lib/iptables
libc has setns: yes
SELinux support: no
libbpf support: no
	libbpf version 0.3.0 is too low, please update it to at least 0.1.0
	LIBBPF_FORCE=on set, but couldn't find a usable libbpf

Fixes: 2f0d672088 ("bpftools: add utility and library packages
supporting eBPF usage")
Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-07 20:07:22 +00:00
Adrian Schmutzler
9397b22df1 treewide: make AddDepends/usb-serial selective
Make packages depending on usb-serial selective, so we do not have
to add kmod-usb-serial manually for every device.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-06 12:38:38 +01:00
Adrian Schmutzler
85b1f4d8ca treewide: remove execute bit and shebang from board.d files
So far, board.d files were having execute bit set and contained a
shebang. However, they are just sourced in board_detect, with an
apparantly unnecessary check for execute permission beforehand.

Replace this check by one for existance and make the board.d files
"normal" files, as would be expected in /etc anyway.

Note:

This removes an apparantly unused '#!/bin/sh /etc/rc.common' in
target/linux/bcm47xx/base-files/etc/board.d/01_network

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-06 11:30:06 +01:00
Daniel Golle
20b6e014a6 kernel: fix kmod-usb3 on platforms without PCI
Partially restore the wild-card matching for kmod-usb3 modules to fix
build on platforms without PCI which otherwise file, as seen on
buildbot:

ERROR: module '[...]/linux-5.4.102/drivers/usb/host/xhci-pci.ko' is missing.
modules/usb.mk:1675: recipe for target '[...]/kmod-usb3_5.4.102-1_mips_mips32.ipk' failed

Fixes: 7bda2e9aba ("kernel: fix kmod-usb3 dependencies")
Fixes: be23f9818a ("apm821xx: add support for kernel 5.10")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-06 04:42:00 +00:00
Daniel Golle
eb030a9a82 arm-trusted-firmware-mediatek: prune now uneeded declarations
Remove unneeded delcarations form package Makefile now that everything
comes from github.com/mtk-openwrt upstream.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-06 03:28:52 +00:00
Ilya Lipnitskiy
7bda2e9aba kernel: fix kmod-usb3 dependencies
Adding CONFIG_USB_XHCI_PCI_RENESAS to KCONFIG made it so it was set
for all targets that included kmod-usb3, not just the intended
apm821xx/nand. xhci-pci has a dependency on xhci-pci-renesas if
CONFIG_USB_XHCI_PCI_RENESAS is set, breaking kmod-usb3 builds on
Linux 5.10 on all other targets.

Rework the dependencies by breaking out xhci-hcd, xhci-mtk, and
xhci-pci-renesas into new hidden kernel modules and setting kmod-usb3
dependencies properly.

Tested by building mt7621 and apm821xx/nand with kmod-usb3 on Linux 5.10

Fixes: be23f981 ("apm821xx: add support for kernel 5.10")
Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
2021-03-06 02:47:11 +00:00
Daniel Golle
9663562188
arm-trusted-firmware-mediatek: don't select DDR3_FLYBY for 1ddr
DDR3_FLYBY has accidentally been set also for the 1-chip variant which
lead to broken, unbootable images. Fix that.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-05 23:55:56 +00:00
Christian Lamparter
be23f9818a apm821xx: add support for kernel 5.10 for testing
This patch copies over refreshed patches from 5.4.

 - dropped crypto patches (they got upstreamed)

 - dropped renesas USB 3 firmware loader (they got upstreamed)

 - NAND now needs extra device-properties for ECC settings.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-03-05 22:47:14 +01:00
Daniel Golle
51ef823f95
uboot-mediatek: improve BPi-R64 support
* allow MAC address from U-Boot env to be inhertied
 * allow eMMC installation to succeed also without recovery present
   on the SD Card.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-05 20:13:54 +00:00
Daniel Golle
dc416983bb arm-trusted-firmware-mediatek: update to ATF 2.4 (2021-02-25)
All necessary blobs are now contained in the upstream repository, no
more wild replacing of blobs needed.
This new version also contains new storage drivers for (SPI-)NAND which
already comes with support for FM35Q1GA, so that patch can be dropped
as well.
Tested on:
 * Bananapi BPi-R64
   - sdmmc-2ddr
   - emmc-2ddr
 * Linksys E8450
   - snand-1ddr

All works fine (booting Bananapi BPi-R64 from SD Card does NOT require
a signed image, so patch arm-trusted-firmware-mediatek to allow doing
that).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-05 17:42:10 +00:00
Rafał Miłecki
4d961436c4 bcm63xx-cfe: update to the latest master
d035016 tp-link: rename to tplink to match DT vendor prefix

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-03-05 14:56:50 +01:00
Rui Salvaterra
9a20c844f4 kernel/modules: fix CDC NCM dependencies
CDC NCM support only depends on CDC Ethernet with Linux 5.10. Fix thusly.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-03-05 14:41:14 +01:00
Florian Eckert
c24c23e185 rssileds: use new application led trigger backend
This will use the new application led trigger backend. For now this is
the only package that uses leds trigger in user space to configure the
kernel led triggers.

The callback script only emmits a message for now, so that this LED is now
managed by the rssileds service. Until now a generic warning was emitted that
this LED trigger is not supported. But that is not true.

-> Skipping trigger 'rssileds' for led '<name>' due to missing kernel module

I think this callback should be changed in the future to restart the
service.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2021-03-05 00:10:06 -10:00
Florian Eckert
dec14ac436 base-files: add new application led trigger backend
For now we have only kernel LED trigger support. With this change it is now
possible to use application triggers.

If we configure a LED with a non kernel trigger, then we check on every
restart and boot of the LED service if we have this trigger as an application
in "/usr/libexec/led-trigger". If this file with the name is found, then we
execute this to init the LED.

Possible use cases are:

- Start/Stop/Restart an application led trigger service for this led
- Init a LED that is configured by a hotplug script (VPN tunnel established)

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2021-03-05 00:10:06 -10:00
Rafał Miłecki
ac39c4bd60 bcm63xx-cfe: update to the latest master
3fb6f1c tp-link: c2300-v1: add cferam file
79f9578 sercomm: vox-2.5: add cferam file

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-03-05 10:16:00 +01:00
Daniel Golle
cec580cba8
fstools: fix build with glibc
stropts.h is unavailable under glibc (and unneeded when building
against glibc). Include it only if not building against glibc.

Reported-by: @DazzyWalkman
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-05 02:07:01 +00:00
Daniel Golle
f3f630145a
arm-trusted-firmware-mediatek: don't try to install absent files
Don't try to install files which no longer exist
Since {e,sd}mmc are now produced by ptgen they have been removed.

Fixes: 5a3562cd1d ("arm-trusted-firmware-mediatek: remove {e,sd}mmc headers")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-04 21:58:40 +00:00
Daniel Golle
5a3562cd1d arm-trusted-firmware-mediatek: remove {e,sd}mmc headers
Turned out those are simply MBR with active boot partition. And not
needed at all on emmc. Remove them as ptgen can now generate hybrid
MBR sufficient to boot MT7622 from SD Card.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-03 01:00:23 +00:00
Daniel Golle
ec76cbc521
fstools: update to git HEAD
19d7d93 libfstools: partname: several fixes

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-02 19:16:15 +00:00
Daniel Golle
1cd4a02c8e
procd: update to git HEAD
64e9f3a procd: fix compilation with newer musl

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-02 19:16:10 +00:00
Daniel Golle
c82cc4407a
libubox: update to git HEAD
2e52c7e libubox: fix BLOBMSG_CAST_INT64 (do not override BLOBMSG_TYPE_DOUBLE)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-02 19:16:04 +00:00
Daniel Golle
e3ab355dde uboot-mediatek: bpi-r64: make sure eMMC installation runs only once
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-02 01:42:34 +00:00