Commit Graph

18181 Commits

Author SHA1 Message Date
Rafał Miłecki
4b9a67362d base-files: generate network config with "device" options
Replace "ifname" with "device" as netifd has been recently patches to
used the later one. It's more clear and accurate.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-27 10:58:49 +02:00
David Bauer
553cc47ec7 hostapd: ACS: fix channel 100 frequency
Channel 100 is a valid channel to choose for 80MHz operation. However,
it's assigned to 5500 MHz, not 5550MHz. In fact, there is no channel
assigned to this frequency.

Fix this obbvious typo to allow ACS to select channel 100 for 80 MHz
operation again.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-05-26 23:12:09 +02:00
Evgeny Kolesnikov
3e9318f3c0 kernel: fix AutoLoad parameter for uleds module
The name of the module is 'uleds', not 'leds-uleds'.

Signed-off-by: Evgeny Kolesnikov <evgenyz@gmail.com>
[improve commit title]
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-05-26 23:10:54 +02:00
Chukun Pan
57cb387cfe ramips: add support for JCG Q20
JCG Q20 is an AX 1800M router.

Hardware specs:
  SoC: MediaTek MT7621AT
  Flash: Winbond W29N01HV 128 MiB
  RAM: Winbond W632GU6NB-11 256 MiB
  WiFi: MT7915 2.4/5 GHz 2T2R
  Ethernet: 10/100/1000 Mbps x3
  LED: Status (red / blue)
  Button: Reset, WPS
  Power: DC 12V,1A

Flash instructions:
  Upload factory.bin in stock firmware's upgrade page,
  do not preserve settings.

MAC addresses map:
  0x00004 *:3e wlan2g/wlan5g
  0x3fff4 *:3c lan/label
  0x3fffa *:3c wan

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2021-05-26 23:10:45 +02:00
Felix Fietkau
91abeebd3b mac80211: sync nl80211.h with upstream and backport a WPA3 related commit
Fixes compatibility issues with the latest hostapd update

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 20:08:25 +02:00
Felix Fietkau
fbd6f099f5 mac80211: add more HE capabilities
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:15 +02:00
Felix Fietkau
8d79915327 mac80211: fix center freq selection for 6 GHz
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
d87b58bb09 hostapd: fix adding back stations after a missed deauth/disassoc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
eefed841b0 hostapd: update to version 2021-05-21
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
c8bcdd5619 mac80211: set hostapd op_class for 6 GHz
This is needed to disambiguate it from 5 GHz channels

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
8504212f65 mac80211: rework default config script
Emit the new band option instead of hwmode
Support 6 GHz band and HE options

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
8b8c1cb09b mac80211: make use of the new 'band' option
Use it to look up frequencies only in the configured band to better deal
with channel number overlap

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
db072fdc9e mac80211: add 6 GHz support to mac80211_hwsim
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
d76535c45e wireless-regdb: update to version 2021.04.21
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Andre Heider
b5420dd710 iw: update to 8fab0c9e
This fixes `iw dev wlan0-mesh station dump`.

8fab0c9 iw: fix ftm_request missing arguments segfault
e816fbc iw: fix mgmt dump missing arguments segfault
5d9d1b8 iw: Fix timestamp output on 32-bit architectures
4b25ae3 iw: fix pointer arithmetic in __print_he_capa
c3df363 iw: add option to print human readable event time
cd64525 iw: print ctrl port tx status event
0ba98b9 iw: use correct type in policy check for mesh
9e38dee iw: scan: fixup HE caps whitespace
17e8564 iw: scan: parse HE capabilities
5735e58 iw: util: factor out HE capability parser
6d8d507 iw: scan: add extension tag parsing
b4e1ec4 man: update wikipage URL, reformat SEE ALSO section
c56036a iw: enable 80MHz support for 6GHz band 11s mesh
fa72728 iw: handle positive error codes gracefully
7ba9093 iw: scan: add flag for scanning colocated ap
5ec60ed iw: Add 'coloc' and 'flush' options to sched_scan
f8ade75 iw: update wikipage URL
b6f2dac iw: Add support for specifying the 160MHz bandwidth when setting the channel/frequency

Signed-off-by: Andre Heider <a.heider@gmail.com>
2021-05-26 11:48:14 +02:00
Felix Fietkau
26da5c2359 hostapd: add support for configuring rts threshold
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
2319cf4ec0 hostapd: fix max_oper_chwidth setting for HE
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
John Crispin
3bd6c8c728 hostapd: add additional radius options
- add functionality to configure RADIUS NAS-Id and Operator-Name
- add functionality to configure RADIUS accounting interval
- enable RADIUS "Chargeable User Identity"

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
c76f1d8330 hostapd: add extra options for hotspot 2.0 / interworking
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
753a91d1d1 hostapd: report radar detected events via ubus
Events are reported on all BSS interfaces

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
8e2ca15726 hostapd: improve channel switch support
Instead of requiring the user to call it on each BSS individually,
run it on all BSSs internally.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
Felix Fietkau
33c69aee41 hostapd: add missing inline stubs for ubus vlan event support
Only used when building without ubus support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-26 11:48:14 +02:00
John Crispin
937dd79e2a hostapd: fix civic location option
Signed-off-by: John Crispin <john@phrozen.org>
2021-05-26 11:48:14 +02:00
Rafał Miłecki
5fe549836f netifd: update to the latest master
899c2a4 interface: support "device" attribute and deprecate "ifname"
62e3cb5 scripts/netifd-wireless.sh: add support for specifying the operating band

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-26 07:56:27 +02:00
Nick Hainke
6687a2483a opkg: use $(PROJECT_GIT), $(AUTORELEASE) and SPDX
1) Use SPDX license headers to be machine readable.
2) Update copyright to 2021.
3) Use $(PROJECT_GIT) instead of manually specifying the git url.
4) Use $(AUTORELEASE) to automatically set the correct PKG_RELEASE.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2021-05-25 23:48:00 +02:00
Paul Spooren
efee640716 busybox: mention SRV support in help message
The SRV was added some time ago and should be mentioned in the short
help message to avoid confusion about missing features.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-05-24 20:30:04 +02:00
Hans Dedecker
7131f5a2fb nat46: fix memory leak
0d5860d fix memory leak in nat46_netdev_destroy().The netdev is forgotten to free in nat46_netdev_destroy function (#26)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2021-05-24 13:02:41 +02:00
INAGAKI Hiroshi
8cc4e87a2f base-files: fix configuration generation of network if "bridge" exists
After the commit 43fc720657
("base-files: generate "device UCI type section for bridge"), the wrong
network configuration is generated for the devices that already have the
bridge device section for VLAN, such as the devices in realtek target.

As a result, the bridge device by additional "device" section is
specified to the "ports" option in the "bridge-vlan" section and netifd
shuts down the switch and the ethernet when the network service started.

Fixes: 43fc720657 ("base-files: generate "device" UCI type section for bridge")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[rmilecki: use $ports for generate_bridge_vlan argument]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-24 09:09:00 +02:00
Rafał Miłecki
7a90ad3c43 base-files: support setting bridge MAC address
Fixes: 43fc720657 ("base-files: generate "device" UCI type section for bridge")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-24 07:48:17 +02:00
Hauke Mehrtens
1903233f2b treewide: Mark packages nonshared if they depend on @TARGET_
This marks all packages which depend on a target with @TARGET nonshared.
If they are not marked nonshared they would be build by the SDK build
and if this happens with a different SDK, then the SDK from the target
the package depends on, the package would not be added to the index.

This should fix the image builder for some of these packages.

This should fix the image builder at least for bcm27xx/bcm2710 and
bcm4908/generic.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-05-24 00:28:22 +02:00
Robert Marko
b054009854 mac80211: fix ATH_REG_DYNAMIC_USER_REG_HINTS
ATH_REG_DYNAMIC_USER_REG_HINTS is currently not being set as mac80211
tries to set it as m which is not possible as its boolean only.

Since its used alongside user regulatory, move it to USER_REGD.

This is required for ath11k to accept regulatory changes, otherwise
it wont accept any changes and will simply force US.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2021-05-23 15:11:38 +02:00
Alexander Egorenkov
42cd06f7fe kexec-tools: add patch to fix issue with appended DTB and zImage on ARM
This patch fixes a recently found problem when a zImage passed to
kexec-tools contains an appended DTB. In that case kexec boot fails because
the decompressor wrongly tries to use the non-existing appended DTB instaed
of the one passed in the register r2.

- http://lists.infradead.org/pipermail/kexec/2021-April/022353.html

Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net>
2021-05-23 15:11:38 +02:00
Konstantin Demin
0097899da7 binutils: update to 2.35.2
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2021-05-23 15:11:38 +02:00
Aleksander Jan Bajkowski
08664f9bf3 kernel: limit crypto-hw-talitos to the mpc85xx and layerscape
CONFIG_CRYPTO_DEV_TALITOS depends on FSL_SOC. This driver only makes sense
on Freescale(NXP) SoCs.

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2021-05-23 15:11:38 +02:00
Aleksander Jan Bajkowski
8f80b9b8f6 kernel: limit crypto-hw-geode to the x86/geode
CONFIG_CRYPTO_DEV_GEODE depends on X86_32. This driver only makes sense
on X86\geode.

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2021-05-23 15:11:38 +02:00
Aleksander Jan Bajkowski
577ba5a3a9 kernel: crypto: drop kmod-crypto-pcompress
CONFIG_CRYPTO_PCOMP and CONFIG_CRYPTO_PCOMP2 have been removed in upstream commit[1].
This symbol doesn't exist since kernel 4.6 and this package is empty.

1. [ crypto: compress - remove unused pcomp interface ]
(110492183c)

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2021-05-23 15:11:38 +02:00
Aleksander Jan Bajkowski
f298d5b810 kernel: crypto: drop kmod-crypto-wq
CONFIG_CRYPTO_WORKQUEUE was removed in upstream commit[1]. This symbol doesn't
exist since kernel 5.3 and this package is empty.

1. [ crypto: cryptd - move kcrypto_wq into cryptd ]
(3e56e16863)

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2021-05-23 15:11:38 +02:00
Ivan Pavlov
b1baa01f14 wolfssl: add support for OpenVPN
Support for wolfSSL has been upstreamed to the master OpenVPN branch
in f6dca235ae560597a0763f0c98fcc9130b80ccf4, so we can use wolfSSL
directly in OpenVPN. So no more needed differnt SSL engine for OpenVPN
in systems based on wolfSSL library
Compiled && tested on ramips/mt7620, ramips/mt7621

Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
2021-05-23 15:11:38 +02:00
Anderson McKinley
0eca9699b1 kernel: add kmod-input-leds
Adds support for LEDs on input devices. Useful for example on x86 laptops-
allows re-purposing num/caps/scroll lock LEDs.

Signed-off-by: Anderson McKinley <coyoso@tuta.io>
2021-05-23 15:10:30 +02:00
David Bauer
ddcb970274 hostapd: wolfssl: add RNG to EC key
Since upstream commit 6467de5a8840 ("Randomize z ordinates in
scalar mult when timing resistant") WolfSSL requires a RNG for
the EC key when built hardened which is the default.

Set the RNG for the EC key to fix connections for OWE clients.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-05-21 15:44:05 +02:00
David Bauer
ef9b103107 wolfssl: always export wc_ecc_set_rng
Since commit 6467de5a8840 ("Randomize z ordinates in scalar
mult when timing resistant") wolfssl requires a RNG for an EC
key when the hardened built option is selected.

wc_ecc_set_rng is only available when built hardened, so there
is no safe way to install the RNG to the key regardless whether
or not wolfssl is compiled hardened.

Always export wc_ecc_set_rng so tools such as hostapd can install
RNG regardless of the built settings for wolfssl.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-05-21 15:43:57 +02:00
Chen Minqiang
a9ebd3a0ea busybox: nslookup applet link with resolv if use glibc
This fixed b36b8b6929
("busybox: remove nslookup_lede/openwrt.patch")

It is likely dropped by mistake, This add back the changes

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2021-05-21 11:31:46 +02:00
Dirk Neukirchen
622f8ef577 grub2: disable liblzma dependency
Florian Ekert reported:

"I have build a fresh master branch recently, Since your last change [1]
on grub2, I have now a new dependency on liblzma for the install package
grub2-editenv.

root@st-dev-07 /usr/lib # ldd /root/grub-editenv
       /lib/ld-musl-x86_64.so.1 (0x7f684b088000)
       liblzma.so.5 => /usr/lib/liblzma.so.5 (0x7f684b06d000)
       libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x7f684b059000)
       libc.so => /lib/ld-musl-x86_64.so.1 (0x7f684b088000)

This was not the case before your update.

root@st-dev-07 /usr/sbin # ldd /usr/sbin/grub-editenv
       /lib/ld-musl-x86_64.so.1 (0x7fd970176000)
       libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x7fd970162000)
       libc.so => /lib/ld-musl-x86_64.so.1 (0x7fd970176000)

My build complains that it cannot satisfy the runtime package dependency
for grub2-editenv.

install -d -m0755 /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/build_dir/target-x86_64_musl/linux-x86_64/grub-pc/grub-2.06~rc1/ipkg-x86_64/grub2-editenv/usr/sbin
install -m0755 /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/build_dir/target-x86_64_musl/linux-x86_64/grub-pc/grub-2.06~rc1/grub-editenv /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/build_dir/target-x86_64_musl/linux-x86_64/grub-pc/grub-2.06~rc1/ipkg-x86_64/grub2-editenv/usr/sbin/
find /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/build_dir/target-x86_64_musl/linux-x86_64/grub-pc/grub-2.06~rc1/ipkg-x86_64/grub2-editenv -name 'CVS' -o -name '.svn' -o -name '.#*' -o -name '*~'| xargs -r rm -rf
Package grub2-editenv is missing dependencies for the following libraries:
liblzma.so.5
make[2]: *** [Makefile:166: /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/bin/APOS/feckert/master/master-Maggie-455-ga5edc0e8e/x86_64/targets/x86/64/packages/grub2-editenv_2.06~rc1-1_x86_64.ipk] Error 1
make[2]: Leaving directory '/home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/package/boot/grub2'
time: package/boot/grub2/pc/compile#78.64#9.79#83.88
   ERROR: package/boot/grub2 failed to build (build variant: pc).
make[1]: *** [package/Makefile:116: package/boot/grub2/compile] Error 1
make[1]: Leaving directory '/home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt'
make: *** [/home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/include/toplevel.mk:230: package/boot/grub2/compile] Error 2

If I add the following changes to the package all works as expected.

<snip>
-  DEPENDS:=@TARGET_x86
+  DEPENDS:=@TARGET_x86 +liblzma
  VARIANT:=pc
endef

This is a hotfix but I dont´t think this is the final solution, because lzma is provided by the package xz.
And This is maintained in the package feed [not the core]"

Dirk stated & offered his patch to disable liblzma and thus resolve the
'out of core dependency' problem:

"LZMA is used in mkimage.c
disabling it prints
Without liblzma (no support for XZ-compressed mips images) (explicitly disabled)
(see configure.ac)

liblzma is autodetected so this issue was present but hidden somehow

[unsure: grep/image generation does not use grub with that option]
OpenWrt does not use that feature currently

[!] some scripts and examples use --compression=xz or -C xz and those will break

grub has an internal xzlib for different "lzma" functionality
(ext. LIBLZMA from XZ (GRUB_COMPRESSION_XZ) vs. GRUB_COMPRESSION_LZMA)"

Hopefully fixes e74d81ece2 and doesn't
break anything else.

Signed-off-by: Dirk Neukirchen <plntyk.lede@plntyk.name>
[include Florian's description of how problem 1st encountered]
[bump package release]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-05-21 09:17:59 +01:00
Piotr Dymacz
6f3a05ebb0 uboot-envtools: support uci-default config also per subtargets
The current version of 'uboot-envtools' package generates dedicated
uci-default file only per target. This change makes it possible to
use subtarget-specific files, with name pattern: 'target_subtarget'
(example: 'ath79_nand'). The subtarget-specific files will take
precedence over target-specific one.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2021-05-20 13:57:43 +02:00
Piotr Dymacz
fab114f6f3 uboot-imx6: update BUILD_DEVICES values
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2021-05-20 13:45:12 +02:00
Piotr Dymacz
959eabf172 uboot-imx6: drop 'HIDDEN' flag from 'mx6cuboxi' define
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2021-05-20 13:45:12 +02:00
Rafał Miłecki
80be798d4a Revert "base-files: migrate old UCI network bridge ports syntax"
This reverts commit f716c30241.

Migrating everyone to the new syntax could break downgrades. We may
reintroduce it way later if needed.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-20 12:25:25 +02:00
Rafał Miłecki
cea6631cdf netifd: update to the latest master
config: fix ifname->ports compat rename

Fixes: 829b5c2ba3 ("netifd: update to the latest version")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-20 12:25:25 +02:00
Rafał Miłecki
0e459668c5 base-files: generate bridge device sections with br- name prefix
Missing br- prefix could result in name conflict between DSA port
interface and bridge interface. Some devices with just one LAN port use
"lan" interface name for DSA port. Trying to create bridge with the same
"lan" name was failing.

Reported-by: David Bauer <mail@david-bauer.net>
Fixes: 43fc720657 ("base-files: generate "device" UCI type section for bridge")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-20 10:40:59 +02:00
Philip Prindeville
b810d649fb busybox: preserve crontabs
/etc/syslog.conf is used by sysklogd, and /etc/crontabs is used
by crond, both features of busybox.  Given this, ownership for
these files should be bound to busybox, especially if one day
there's a way to do an in-place opkg update of busybox.

There's also the busybox provided syslogd which uses this file
if CONFIG_BUSYBOX_FEATURE_SYSLOGD_CFG is set.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2021-05-19 15:50:50 +02:00