ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 15:02:32 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
32,946 Commits 9 Branches 75 Tags 912 MiB
4afee42560
Commit Graph

88 Commits

Author SHA1 Message Date
John Crispin
42c9a85e8e Revert "lantiq: activate spi-xway on TDW89X0" 
This reverts commit 68c2e4789b4f071ee75d39248f4d08fe8283eb28.

commit r47159 was bad

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47207
 2015-10-19 10:08:12 +00:00
John Crispin
02197db96f lantiq: activate spi-xway on TDW89X0 
use the hardware spi core in favour of spi-gpio.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47159
 2015-10-07 12:12:48 +00:00
John Crispin
a0543c2bdc lantiq: several ARV7519RW22 fixes 
Fixes ARV7519RW22 flash register (only 1 flash).
Power LED is green, not red.
Rename message LEDs to internet.
Add LEDs configuration (lan, wan, power).
Enable switch VLANs.
Fix secondary USB.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 47132
 2015-10-05 10:28:34 +00:00
John Crispin
161179f40b lantiq: Add target TP-Link TD-W8980 
The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz
wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47130
 2015-10-05 10:28:19 +00:00
John Crispin
4595440215 lantiq: Introduce DWC2 compatible DTS definitions for AR9 USB 
Since the AR9 USB is very similar to the VR9 USB it too can be used with
the upstream DWC2 driver.

Here are the DTS definitions which make it compatible with the DWC2
driver.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>

SVN-Revision: 46914
 2015-09-14 20:08:07 +00:00
John Crispin
b9963bbe80 lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V) 
lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)

Signed-off-by: Jannis Pinter <jannis@pinterjann.is>

SVN-Revision: 46224
 2015-07-07 13:44:58 +00:00
John Crispin
6bdd209f15 lantiq: Add support for the BT Home Hub 5A 
u-boot support depends on the next "upstream" version ([0]) from
Daniel Schwierzeck.
Since the installation process is quite complicated a "how to" was
added to the wiki: [1]

[0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next
[1] http://wiki.openwrt.org/toh/bt/homehub_v5a

V2: Use the correct PCI interrupt (fixes 2.4GHz wifi)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46223
 2015-07-07 13:44:53 +00:00
John Crispin
415fe71d00 lantiq: Make the MEI address available for kernel drivers 
Newer DSL driver versions depend on the address information.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46221
 2015-07-07 13:44:32 +00:00
John Crispin
ca1db6b5ce lantiq: Add support for Arcadyan VGV7510KW22 (known as o2 Box 6431) 
SVN-Revision: 45897
 2015-06-05 14:11:36 +00:00
Jonas Gorski
43c0a725af lantiq: fix VG3503J rootfs offset 
In r44391 the kernel partion size was increased to allow larger kernels,
but the rootfs partition offset was missed. Fix this by setting the
rootfs offset to the expected value.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45868
 2015-06-01 12:37:24 +00:00
John Crispin
2a390925df lantiq: Convert Zyxel P-2812HNU-FX and TP-Link TD-W8970 to support dwc2 
Here the device tree entry for ifxhcd is listed as compatible with one
supported in dwc2 (after patching the dwc driver appropriately).

A second entry is added to support the second core of the hcd. This
entry is listed to be compatible with only dwc2. Done this way there
should be backwards support for both hcd drivers (ltq-hcd and dwc2)

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>

SVN-Revision: 44676
 2015-03-11 17:08:32 +00:00
John Crispin
440d9ddf7f lantiq: fix DGN3500 root device 
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 44428
 2015-02-13 07:29:17 +00:00
John Crispin
f90d9d486a lantiq: fix VG3503J partition table for newer kernels 
the kernel has increased and does not fit into the 1,5MB anymore.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44391
 2015-02-11 10:17:38 +00:00
John Crispin
1c9dc26ce9 lantiq: td-w8970: fix reset button 
For TP-LINK TD-W8970 button should work as "reset", not "BTN_1".

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 44352
 2015-02-09 12:14:32 +00:00
John Crispin
826b461427 lantiq: add 3.18 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44348
 2015-02-09 12:13:25 +00:00
John Crispin
fcbc21890c lantiq: DGN3500 cleanups 
This patch builds on the previous three to streamline support for the
Netgear DGN3500.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 44032
 2015-01-18 09:41:04 +00:00
John Crispin
8cbf97e936 Remove old P2812HNUFX dts 
Remove unused P2812HNUFX board definition.

Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43988
 2015-01-17 07:07:21 +00:00
John Crispin
b4d2b69c43 lantiq: Add device tree for P2812HNUF1 and P2812HNUF3 
Add device tree for P2812HNUF1 and P2812HNUF3.

Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43986
 2015-01-17 07:07:06 +00:00
John Crispin
550784f1ea lantiq: BT Home Hub3A - device tree 
BT Home Hub3A - device tree

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 43877
 2015-01-08 20:25:35 +00:00
John Crispin
36e862da17 lantiq: vgv7519: fix board_config on dts, read mac address and set 
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43109
 2014-10-29 20:50:40 +00:00
John Crispin
4d7ae64b73 vgv7519: support more recent board release with vrx288 v1.2 
The existance of this new board has been confirmed and tested by the guy on this commit

76fdd8e638

SVN-Revision: 43072
 2014-10-26 17:18:41 +00:00
John Crispin
0f790247e3 lantiq: allow pcie to be disabled by dts + vgv7519 fix pci irq + disable pcie by dts 
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 42907
 2014-10-14 11:04:25 +00:00
John Crispin
c085d07ee3 lantiq - vgv7519: load rt5362 eeprom from bootloader param patition 
SVN-Revision: 42824
 2014-10-06 20:08:30 +00:00
John Crispin
6a961da231 lantiq - vgv7519: enable pci bus 
SVN-Revision: 42823
 2014-10-06 20:08:18 +00:00
John Crispin
c2e4007bc1 lantiq - vgv7519: remove spi_cs4, since the board use this line for something else 
SVN-Revision: 42822
 2014-10-06 20:08:11 +00:00
John Crispin
4cdf861521 lantiq - vgv7519: fix open-drain configuration for stp 
SVN-Revision: 42821
 2014-10-06 20:08:04 +00:00
John Crispin
1e7962ceaf lantiq - vgv7519: add pci-rst entry into dts 
SVN-Revision: 42820
 2014-10-06 20:07:56 +00:00
John Crispin
ea9aec2fa9 lantiq - vgv7519: remove exin definition copied from dev-board dts 
SVN-Revision: 42819
 2014-10-06 20:07:45 +00:00
John Crispin
9483a322dd lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for this board 
SVN-Revision: 42818
 2014-10-06 20:07:30 +00:00
John Crispin
48d67fe650 lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 for pci handling 
SVN-Revision: 42817
 2014-10-06 20:07:19 +00:00
John Crispin
d0606948cb lantiq - vgv7519: fix gphy led configuration (this set correct alt function to gpio and let peripherials on pci bus to comes up) 
SVN-Revision: 42816
 2014-10-06 20:07:04 +00:00
John Crispin
3dd93e8336 lantiq: move the lantiq,switch property into the interface node 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42574
 2014-09-16 14:53:01 +00:00
John Crispin
e47fbcbf1d lantiq: BTHOMEHUBV2B use bigger mtd partition for kernel 
The bb-rc3 image for the BTHOMEHUBV2B is too big for its
mtd partition. This patch corrects the partition sizes in
the device tree. This patch should really go in before
bb-final, otherwise the BTHOMEHUBV2B images won't be useable.
I do apologise for not spotting this straight away.

Many thanks,

Ben

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 42316
 2014-08-28 06:27:41 +00:00
John Crispin
b796ff6ef3 lantiq: generate unique ARV7519RW22 firmware 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42183
 2014-08-18 13:09:11 +00:00
John Crispin
5f71dbb005 lantiq: improve ARV7519RW22 support 
- use full board name
- rename uboot-env partition
- add dsl_fw partition
- remove unneeded pinmux groups
- move gigabit ethernet to LAN
- load mac address from mtd

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42180
 2014-08-18 13:08:56 +00:00
John Crispin
c21a20cd78 lantiq: fix dgn3500 and td8970 wifi 
ath9k failed to come up due to a bad mac addr

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41860
 2014-07-28 15:26:41 +00:00
John Crispin
4beb468f11 lantiq: fix board_id/boardname for VGV7519 
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 41672
 2014-07-16 11:36:02 +00:00
John Crispin
85cacfd753 lantiq: vgv7519 add missing wps label to dts 
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 41655
 2014-07-14 18:43:02 +00:00
John Crispin
85ca75decd lantiq BTHOMEHUBV2B - update dts for automatic detection of ubi partition and rootfs type 
This patches the BTHOMEHUB2B device tree to make use of the
new code for automatic detection of the ubi partition and the
rootfs type within it. Gets rid of the ugly alternative bootargs
lines.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41214
 2014-06-16 18:54:38 +00:00
John Crispin
e6c46554bb lantiq: fixup vgv7519 usb support 
https://dev.openwrt.org/ticket/16800

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41213
 2014-06-16 18:54:33 +00:00
John Crispin
7ba5188fe9 lantiq: Fix ARV7510PW22 etop 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40920
 2014-06-02 12:43:43 +00:00
John Crispin
d4ec98c2cc lantiq: Fix ARV4518 etop 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40919
 2014-06-02 12:43:35 +00:00
John Crispin
4f3c740110 lantiq: BT Home Hub 2B - overlayfs on top of ubi 
BT Home Hub 2B: use overlayfs on top of ubi.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40553
 2014-04-22 08:08:46 +00:00
John Crispin
c4aae8fbc5 lantiq: ARV7519RW22: several fixes 
- Fix ethernet ports.
- Clean DTS files.
- WiFi is lantiq based (not supported yet), remove ath9k.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40519
 2014-04-16 12:01:09 +00:00
John Crispin
9fbbd04f45 lantiq: enable switch on td8970 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40498
 2014-04-12 21:22:21 +00:00
John Crispin
60edb8f47b lantiq: add an extra partition to the TDW8970 flash that can be used to store the vdsl firmware 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40461
 2014-04-11 20:40:34 +00:00
John Crispin
858b972e66 lantiq: there is a V2 of VG3503J that needs a newer fe phy firmware 
this should really be auto detected by the kernel, lets used this workaround until the real
solution is ready

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40418
 2014-04-07 15:10:22 +00:00
John Crispin
709cab91d2 lantiq: BT Home Hub 2B support - board support 
Board support patch for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40370
 2014-04-03 14:26:54 +00:00
John Crispin
78a7ae428f lantiq: make td8970 wifi led work 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40368
 2014-04-03 14:26:46 +00:00
John Crispin
58eccdac4f lantiq: fix vr9 ubi handling 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40364
 2014-04-03 14:26:24 +00:00