INAGAKI Hiroshi
|
927a77ecff
|
ramips: add support for ELECOM WMC-M1267GST2
ELECOM WMC-M1267GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) mesh router,
based on MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 256 MiB (Nanya NT5CC128M16JR-EK)
- Flash : SPI-NOR 32 MiB (Winbond W25Q256JVFIQ)
- WLAN : 2.4/5 GHz 2T2R (MediaTek MT7615D)
- Ethernet : 10/100/1000 Mbps x5
- switch : MediaTek MT7530 (SoC)
- LEDs/Keys : 6x/6x
- UART : through-hole on PCB ("J4")
- arrangement: 3.3V, GND, TX, RX from tri-angle marking
- settings : 57600n8
- Power : 12 VDC, 1 A
Flash instruction using factory image:
1. Boot WMC-M1267GST2 normally with "Router" mode
2. Access to "http://192.168.2.1/" and open firmware update page
("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing
MAC addresses:
LAN : 04:AB:18:xx:xx:61 (Factory, 0xFFF4 (hex))
WAN : 04:AB:18:xx:xx:62 (Factory, 0xFFFA (hex))
2.4 GHz: 04:AB:18:xx:xx:63
5 GHz : 04:AB:18:xx:xx:64 (Factory, 0x4 (hex))
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
|
2024-05-11 19:33:28 +02:00 |
|
