Commit Graph

53620 Commits

Author SHA1 Message Date
Rucke Teg
e040d31177 base-file: remove password aging feature form /etc/shadow
In the default shadow file, as visible in the failsafe mode, the user
root has value of `0` set in  the 3rd field, the date of last password
change. This setting means that the password needs to be changed the
next time the user will log in the system. `dropbear` server is ignoring
this setting but `openssh-server` tries to enforce it and fails in the
failsafe mode because the rootfs is R/O.

Disable the password aging feature for user root by setting the 3rd
filed empty.

Signed-off-by: Rucke Teg <rucketeg@protonmail.com>
2022-02-24 18:10:30 +01:00
Nick Lowe
e8d048c5e0 hostapd: SAE - Enable hunting-and-pecking and H2E
Enable both the hunting-and-pecking loop and hash-to-element mechanisms
by default in OpenWRT with SAE.

Commercial Wi-Fi solutions increasingly frequently now ship with both
hunting-and-pecking and hash-to-element (H2E) enabled by default as this
is more secure and more performant than offering hunting-and-pecking
alone for H2E capable clients.

The hunting and pecking loop mechanism is inherently fragile and prone to
timing-based side channels in its design and is more computationally
intensive to perform. Hash-to-element (H2E) is its long-term
replacement to address these concerns.

For clients that only support the hunting-and-pecking loop mechanism,
this is still available to use by default.

For clients that in addition support, or were to require, the
hash-to-element (H2E) mechanism, this is then available for use.

Signed-off-by: Nick Lowe <nick.lowe@gmail.com>
2022-02-24 18:04:05 +01:00
Paul Spooren
fb5d0dc362 CI: allow dots in commit subject area
Due to a limited grep pattern, subjects containing dots like `image.mk`
were falsely reported as problematic. Extend pattern to allow dots.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-02-24 16:41:02 +01:00
Paul Spooren
1e2549045c tools: use https for bc mirrors
All mirrors offer encrypted downloads, use it.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-02-24 15:36:28 +01:00
Paul Spooren
5777c6fc95 mvebu: add targz feature flag
Adding the feature flag automatically creates a a rootfs.tar.gz files
which can be used for Docker rootfs containers.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-02-24 15:32:57 +01:00
Petr Štetiar
d6119e2f38 Revert "scripts/diffconfig.sh: ensure config/conf is built"
This reverts commit c0849c1d9c as it seems
to introduce regression in config.buildinfo files produced at least by
buildbots:

 $ curl -s https://downloads.openwrt.org/snapshots/targets/ath79/generic/config.buildinfo | head -2
 make[3]: Entering directory '/builder/shared-workdir/build'
 make[3]: Leaving directory '/builder/shared-workdir/build'

References: https://github.com/openwrt/openwrt/issues/9297#issuecomment-1049719381
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-02-24 11:44:00 +01:00
Petr Štetiar
b9251e3b40 wolfssl: fix API breakage of SSL_get_verify_result
Backport fix for API breakage of SSL_get_verify_result() introduced in
v5.1.1-stable.  In v4.8.1-stable SSL_get_verify_result() used to return
X509_V_OK when used on LE powered sites or other sites utilizing
relaxed/alternative cert chain validation feature. After an update to
v5.1.1-stable that API calls started returning X509_V_ERR_INVALID_CA
error and thus rendered all such connection attempts imposible:

 $ docker run -it openwrt/rootfs:x86_64-21.02.2 sh -c "wget https://letsencrypt.org"
 Downloading 'https://letsencrypt.org'
 Connecting to 18.159.128.50:443
 Connection error: Invalid SSL certificate

Fixes: #9283
References: https://github.com/wolfSSL/wolfssl/issues/4879
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-02-22 20:27:15 +01:00
Daniel Golle
9e6a71e86d
mediatek: mt7623: drop RAMFS_COPY_BIN
fwtool is now always part of the sysupgrade stage2 ramdisk, so drop
the no longer needed RAMFS_COPY_BIN variable.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-02-22 19:19:46 +00:00
Daniel Golle
bb9043031a
mediatek: mt7622: drop RAMFS_COPY_BIN and RAMFS_COPY_DATA
Now that both, fw_printenv/fw_setenv and fwtool are always present
during stage2 sysupgrade, we no longer need to list them in
RAMFS_COPY_BIN and RAMFS_COPY_DATA in platform.sh.
Drop both variables as they are now unneeded.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-02-22 19:16:08 +00:00
Daniel Golle
2baded9ecc
base-files: make sure tools are present in sysupgrade ramdisk
Not all targets create /var/lock or touch /var/lock/fw_printenv.lock in
their platform.sh. This is problematic as fw_printenv then fails in
case /var/lock/fw_printenv.lock has not been created by previous calls
to fw_printenv/fw_setenv before sysupgrade is run.

Targets using fw_printenv/fw_setenv during sysupgrade:
 * ath79/*
 * ipq40xx/*
 * ipq806x/*
 * kirkwood/*
 * layerscape/*
 * mediatek/mt7622
 * mvebu/*
 * ramips/*
 * realtek/*

Targets currently using additional steps in /lib/upgrade/platform.sh
to make sure /var/lock/fw_printenv.lock (or at least /var/lock)
actually exists:
 * ath79/* (openmesh devices)
 * ipq40xx/* (linksys devices)
 * ipq806x/* (linksys devices)
 * kirkwood/* (linksys devices)
 * layerscape/*
 * mvebu/cortexa9 (linksys devices)

Given that accessing the U-Boot environment during sysupgrade is not
uncommon and the situation across targets is currently quite diverse,
just make sure both tools as well fw_env.config are always copied to
the ramdisk used for sysupgrade. Also make sure /var/lock always
exists.

This now allows to remove copying of fw_printenv/fw_setenv as well as
fw_env.config, creation of /var/lock or even /var/lock/fw_printenv.lock
from lib/upgrade/platform.sh or files included there.

As the same applies also to 'fwtool' which is used by generic eMMC
sysupgrade, also always copy that to ramdisk.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-02-22 19:16:03 +00:00
Eneas U de Queiroz
c0849c1d9c scripts/diffconfig.sh: ensure config/conf is built
diffconfig.sh runs ./scripts/config/conf, but it does not get built
with 'make {menu,x,n}config.  Call 'make ./scripts/config/conf' to
ensure it's been built befpre running it.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2022-02-22 16:37:23 +01:00
Petr Štetiar
418dc0497d build: toplevel.mk: fix missing kconfig dependency tracking
Toplevel Make is not aware about changes in the `scripts/config/*conf`
targets and this is causing issues for during update to that part of
build tree, where one needs to handle this manually by either force
rebuilding the targets or running `make config-clean`. Fix this by
forcing the rebuild if necessary.

Fixes: #9297
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-02-22 16:37:23 +01:00
Eneas U de Queiroz
0134f845da openssl: configure engines with uci
This uses uci to configure engines, by generating a list of enabled
engines in /var/etc/ssl/engines.cnf from engines configured in
/etc/config/openssl:

    config engine 'devcrypto'
            option enabled '1'

Currently the only options implemented are 'enabled', which defaults to
true and enables the named engine, and the 'force' option, that enables
the engine even if the init script thinks the engine does not exist.

The existence test is to check for either a configuration file
/etc/ssl/engines.cnf.d/%ENGINE%.cnf, or a shared object file
/usr/lib/engines-1.1/%ENGINE%.so.

The engine list is generated by an init script which is set to run after
'log' because it informs the engines being enabled or skipped.  It
should run before any service using OpenSSL as the crypto library,
otherwise the service will not use any engine.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2022-02-22 16:37:23 +01:00
Eneas U de Queiroz
30b0351039 openssl: configure engine packages during install
This enables an engine during its package's installation, by adding it
to the engines list in /etc/ssl/engines.cnf.d/engines.cnf.

The engine build system was reworked, with the addition of an engine.mk
file that groups some of the engine packages' definitions, and could be
used by out of tree engines as well.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2022-02-22 16:37:23 +01:00
Eneas U de Queiroz
17a6ca12d3 openssl: config engines in /etc/ssl/engines.cnf.d
This changes the configuration of engines from the global openssl.cnf to
files in the /etc/ssl/engines.cnf.d directory.  The engines.cnf file has
the list of enabled engines, while each engine has its own configuration
file installed under /etc/ssl/engines.cnf.d.

Patches were refreshed with --zero-commit.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2022-02-22 16:37:23 +01:00
Piotr Dymacz
aae7af4219 ath79: image: use 'kmod-usb-chipidea2' for AR933x devices
AR933x based devices should include 'kmod-usb-chipidea2' for USB
support. Fixes: #9243.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2022-02-21 22:22:30 +01:00
Piotr Dymacz
034531db73 ath79: image: drop 'BOARDNAME' from devices recipes
The 'BOARDNAME' variable is part of target configuration and shouldn't
be part of a device's image recipe.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2022-02-21 19:16:30 +01:00
Felix Fietkau
cbfce92367 qosify: update to the latest version
65b42032063f interface: add missing autorate-ingress options

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-20 18:13:14 +01:00
Sander Vanheule
66d8db01cc realtek: remove debugging code from timer
Remove some (dead) debugging code from the Realtek timer to clean up the
sources of this driver.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-02-20 16:23:58 +00:00
Sander Vanheule
9db651f4a2 realtek: use DT provided address for timers
The I/O base address for the timers was hardcoded into the driver,
or derived from the HW IRQ number as an even more horrible hack. All
supported SoC families have these timers, but with hardcoded addresses
the code cannot be reused right now.

Request the timer's base address from the DT specification, and store it
in a private struct for future reference.

Matching the second interrupt specifier, the address range for the
second timer is added to the DT specification.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-02-20 16:23:58 +00:00
Sander Vanheule
71810eb068 realtek: clean up RTL930x timer DT node
The Realtek timer node for RTL930x doesn't have any child nodes, making
the use of '#address-cells' quite pointless. It is also not an interrupt
controller, meaning it makes no sense to define '#interrupt-cells'.

The I/O address for this node is also wrong, but this is hidden by the
fact that the driver associated with this node bypasses the usual DT
machinery and does it's own thing. Correct the address to have a sane
value, even though it isn't actually used.

Fixes: a75b9e3ecb ("realtek: Adding RTL930X sub-target")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-02-20 16:23:58 +00:00
Sander Vanheule
fa20f2bfc7 realtek: ZyXEL GS1900-48: fix system LED polarity
When driven by a GPIO pin, the system LED needs to be configured as
active high. Otherwise the LED switches off after booting and
initialisation.

Fixes: 47f5a0a3ee ("realtek: Add support for ZyXEL GS1900-48 Switch")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-02-20 16:23:55 +00:00
Sander Vanheule
66140820e1 realtek: ZyXEL GS1900-48: drop status from gpio1
The default value for a DT node's status property is already "okay", so
there's no need to specify it again. Drop the status property to clean
up the DTS.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-02-20 16:23:55 +00:00
Sander Vanheule
a39fbaf23a realtek: use higher priority for timer interrupts
The assigned output index for the event timers was quite low, lower even
than the ethernet interrupt. This means that high network load could
preempt timer interrupts, possibly leading to all sorts of strange
behaviour.

Increase the interrupt output index of the event timers to 5, which is
the highest priority output and corresponds to the (otherwise unused)
MIPS CPU timer interrupt.

Fixes: a75b9e3ecb ("realtek: Adding RTL930X sub-target")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-02-20 16:23:55 +00:00
Sander Vanheule
4b31717fb0 realtek: move RTL8231 definitions to board files
The RTL8231 is an external chip, and not part of the SoC. That means
it is more appropriate to define it in the board specific (base) files,
instead of the DT include for the SoC itself.

Moving the RTL8231 definition also ensures that boards with no GPIO
expander, or an alternative one, don't have a useless gpio1 node label
defined.

Tested on a Netgear GS110TPPv1.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-02-20 16:23:55 +00:00
Sander Vanheule
004d4d66c8 realtek: fix node addresses for RTL839x
The address in some node names doesn't match the actual offset specified
in the DT node. Update the names to fix this.

While fixing the node names, also drop the unused node labels.

Fixes: 0a7565e536 ("realtek: Update rtl839x.dtsi for realtek,rtl-intc, new gpio controller remove RTL8231 node")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-02-20 16:23:55 +00:00
Sander Vanheule
1ca081000a realtek: consolidate bootargs again
Bootargs for devices in the realtek target were previously consolidated
in commit af2cfbda2b ("realtek: Consolidate bootargs"), since all
devices currently use the same arguments.

Commit a75b9e3ecb ("realtek: Adding RTL930X sub-target") reverted this
without any argumentation, so let's undo that.

Commit 0b8dfe0851 ("realtek: Add RTL931X sub-target") introduced the
old bootargs also for RTL931x, without providing any actual device
support. Until that is done, let's assume vendors will have done what
they did before, and use a baud rate of 115200.

Fixes: a75b9e3ecb ("realtek: Adding RTL930X sub-target")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-02-20 16:23:55 +00:00
Matthew Hagan
6f88526fa4 mvebu: cortexa72: enable ARM_ARMADA_8K_CPUFREQ
Enable the AP806's cpufreq driver. This driver is compatible with the
Armada 7K and 8K platforms.

Tested-by: Stijn Segers <foss@volatilesystems.org> (RB5009UG+S+IN)
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
2022-02-20 14:26:43 +01:00
Josef Schlehofer
696f0a1cb4 uboot-mvebu: backport pending patches for Marvell A38x
100-ddr-marvell-a38x-fix-BYTE_HOMOGENEOUS_SPLIT_OUT-deci.patch [1]:
SoC Marvell A38x is used in Turris Omnia, and we thought that with recent
fiddling around DDR training to fix it once for all, there were
reproduced the issue in the upcoming new revision Turris Omnia boards.

101-arm-mvebu-spl-Add-option-to-reset-the-board-on-DDR-t.patch [2]:
This is useful when some board may occasionally fail with DDR training,
and it adds the option to reset the board on the DDR training failure

102-arm-mvebu-turris_omnia-Reset-the-board-immediately-o.patch [3]:
This enables the option CONFIG_DDR_RESET_ON_TRAINING_FAILURE (added by
101 patch), so the Turris Omnia board is restarted immediately, and it
does not require to reset the board manually or wait 120s for MCU to
reset the board

[1] https://patchwork.ozlabs.org/project/uboot/patch/20220217000837.13003-1-kabel@kernel.org/
[2] https://patchwork.ozlabs.org/project/uboot/patch/20220217000849.13028-1-kabel@kernel.org/
[3] https://patchwork.ozlabs.org/project/uboot/patch/20220217000849.13028-2-kabel@kernel.org/

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2022-02-20 14:26:42 +01:00
John Audia
82da1dfd69 bcm27xx: bcm2711: update defconfig
Enabled CONFIG_ALL_KMODS and ran make kernel_menuconfig against
bcm2711 to update defconfig.  Some of the removed symbols are
present in target/linux/generic/config-5.10 while others were
removed by the make target.

Signed-off-by: John Audia <graysky@archlinux.us>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (wrapped)
2022-02-20 14:26:42 +01:00
John Audia
a478202d74 bcm27xx: bcm2710: update defconfig
Enabled CONFIG_ALL_KMODS and ran make kernel_menuconfig against
bcm2710 to update defconfig.  Some of the removed symbols are
present in target/linux/generic/config-5.10 while others were
removed by the make target.

Signed-off-by: John Audia <graysky@archlinux.us>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (wrapped)
2022-02-20 14:26:42 +01:00
John Audia
332f69583a bcm27xx: bcm2709: update defconfig
Enabled CONFIG_ALL_KMODS and ran make kernel_menuconfig against
bcm2709 to update defconfig.  Some of the removed symbols are
present in target/linux/generic/config-5.10 while others were
removed by the make target.

Signed-off-by: John Audia <graysky@archlinux.us>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (wrapped)
2022-02-20 14:26:41 +01:00
John Audia
dbb45421ba bcm27xx: bcm2708: update defconfig
Enabled CONFIG_ALL_KMODS and ran make kernel_menuconfig against
bcm2708 to update defconfig.  Some of the removed symbols are
present in target/linux/generic/config-5.10 while others were
removed by the make target.

Signed-off-by: John Audia <graysky@archlinux.us>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (wrapped)
2022-02-20 14:26:41 +01:00
Florian Eckert
808210d992 mac80211: add debug compile option for rtw88 devices
This commit adds the following package compile options.

CONFIG_PACKAGE_RTW88_DEBGUG:
Compile the driver with additional debug logging output

CONFIG_PACKAGE_RTW88_DEBGUGFS:
Add the possibility to map information about the driver rtw88 into
debugfs.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2022-02-20 14:26:40 +01:00
Robert Marko
c1e06a0cbb ipq40xx: mikrotik: fix LED script
Fix the missing ;; after the cAP ac case in /e/b/01_leds.

Fixes: 93d9119 ("ipq40xx: add MikroTik cAP ac support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (minor touch-up)
2022-02-20 14:24:43 +01:00
Lech Perczak
411940ded4 ath79: uboot-envtools: fix partition for ZTE MF286
By mistake, a wrong partition for U-boot environment was introduced for
ZTE MF286 while adding support, when flash layout wasn't finalized. Fix
that, according to the actual flash layout:
dev:    size   erasesize  name
mtd0: 00140000 00020000 "fota-flag"
mtd1: 00140000 00020000 "caldata"
mtd2: 00140000 00020000 "mac"
mtd3: 00f40000 00020000 "ubiconcat0"
mtd4: 00400000 00020000 "kernel"
mtd5: 06900000 00020000 "ubiconcat1"
mtd6: 00080000 00010000 "u-boot"
mtd7: 00020000 00010000 "u-boot-env"
mtd8: 07840000 00020000 "ubi"

Fixes: 8c78a13bfc ("ath79: support ZTE MF286")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2022-02-20 14:04:38 +01:00
Christian Lamparter
5696244ae2 ipq806x: disable Linksys EA7500v1 and EA8500
The kernel of both images will no longer fit into
the 3072KiB / 3MiB kernel partition:
|Image Name:   ARM OpenWrt Linux-5.10.100
|Created:      Sat Feb 19 00:11:55 2022
|Image Type:   ARM Linux Kernel Image (uncompressed)
|Data Size:    3147140 Bytes = 3073.38 KiB = 3.00 MiB

Disable both targets for now, until a solution is available.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-20 14:04:38 +01:00
Christian Lamparter
c062087a6c mpc85xx: fix KEY_RFKILL vs KEY_RFKill
This fixes a buildbot builder error:
Error: arch/powerpc/boot/dts/tl-wdr4900-v1.dts:245.18-19 syntax error

Fixes: 256e1dbc7d ("mpc85xx: utilize dt-binding definitions for keys + gpios")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-20 14:04:38 +01:00
Petr Štetiar
d8bf730fe0 netifd: bump to version 2022-02-20
Contains following changes:

 136006b88826 cmake: fix usage of implicit library and include paths
 bc0e84d689e2 netifd: interface-ip: don't set fib6 policies if ipv6 disabled

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-02-20 10:52:55 +01:00
Nick McKinney
61d97bf377 ramips: clean up Makefile formatting
Use correct indent in target/linux/ramips/image/mt7621.mk
to be consistent with the rest of the file.

Signed-off-by: Nick McKinney <nick@ndmckinney.net>
[rephrase commit message as Adrian suggested, fix a6004ns-m indent]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-02-20 16:16:43 +09:00
Sven Roederer
65df862b50 ramips: mt7621: print size of factory initramfs-image if it's too big
It's helpful to know the current and maximal size of the imagefiles if the
creation fails.

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
2022-02-20 15:55:36 +09:00
Graham Cole
e282e50d44 ath79: fix wndr4500v3 lan port order to match case
The LED and LAN port numbering on the case of wndr4500v3 devices are
reversed relative to the wndr4300v2. I created this patch to so that the
ordering in OpenWRT will be consistent with that.

Signed-off-by: Graham Cole <diakka@gmail.com>
2022-02-20 13:54:12 +09:00
Yoonji Park
125b9aec29 ramips: add support for ipTIME A3002MESH
Add support for ipTIME A3002MESH.

Hardware:
- SoC: MediaTek MT7621AT (880MHz, Duel-Core)
- RAM: DDR3 128MB
- Flash: XMC XM25QH128AHIG (SPI-NOR 16MB)
- WiFi: MediaTek MT7615D (2.4GHz, 5GHz, DBDC)
- Ethernet: MediaTek MT7530 (WAN x1, LAN x2, SoC built-in)
- UART: [GND, RX, TX, 3.3V] (57600 8N1, J4)

MAC addresses:
| interface |        MAC        |     source     | comment
|-----------|-------------------|----------------|----------
|       LAN | 70:XX:XX:5X:XX:X3 |                |
|       WAN | 70:XX:XX:5X:XX:X1 | u-boot 0x1fc40 |
|   WLAN 2G | 72:XX:XX:4X:XX:X0 |                |
|   WLAN 5G | 70:XX:XX:5X:XX:X0 | factory 0x4    |
|           | 70:XX:XX:5X:XX:X0 | u-boot 0x1fc20 | unknown
|           | 70:XX:XX:5X:XX:X2 | factory 0x8004 | unknown

- WLAN 2G MAC address is not the same as stock firmware since OpenWrt
  uses LAN MAC address with local bit sets.

Installation:
1. Flash initramfs image. This can be done using stock web ui or TFTP
2. Connect to OpenWrt with an SSH connection to 192.168.1.1
3. Perform sysupgrade with sysupgrade image

Revert to stock firmware:
- Flash stock firmware via OEM TFTP Recovery mode
- Perform sysupgrade with stock image

TFTP Recovery method:
1. Unplug the router
2. Hold the reset button and plug in
3. Release when the power LED stops flashing and go off
4. Set your computer IP address manually to 192.168.0.x / 255.255.255.0
5. Flash image with TFTP client to 192.168.0.1

Signed-off-by: Yoonji Park <koreapyj@dcmys.kr>
[wrap/rephrase commit message]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-02-20 13:53:15 +09:00
Sungbo Eo
9968a909c2 Revert "ramips: increase spi-max-frequency for ipTIME mt7620 devices"
This reverts commit 13a185bf8a.

There was a report that one A1004ns device fails to detect its flash
chip correctly:

[    1.470297] spi-nor spi0.0: unrecognized JEDEC id bytes: e0 10 0c 40 10 08
[    1.484110] spi-nor: probe of spi0.0 failed with error -2

It also uses a different flash chip model:
* in my hand: Winbond W25Q128FVSIG (SOIC-8)
* reported: Macronix MX25L12845EMI-10G (SOP-16)

Reducing spi-max-frequency solved the detection failure. Hence revert.

Reported-by: Koasing <koasing@gmail.com>
Tested-by: Koasing <koasing@gmail.com>
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-02-20 13:47:57 +09:00
Sungbo Eo
19a90262df wireless-regdb: update to version 2022.02.18
e061299 wireless-regdb: Raise DFS TX power limit to 250 mW (24 dBm) for the US
2ce78ed wireless-regdb: Update regulatory rules for Croatia (HR) on 6GHz
0d39f4c wireless-regdb: Update regulatory rules for South Korea (KR)
acad231 wireless-regdb: Update regulatory rules for France (FR) on 6 and 60 GHz
ea83a82 wireless-regdb: add support for US S1G channels
4408149 wireless-regdb: add 802.11ah bands to world regulatory domain
5f3cadc wireless-regdb: Update regulatory rules for Spain (ES) on 6GHz
e0ac69b Revert "wireless-regdb: Update regulatory rules for South Korea (KR)"
40e5e80 wireless-regdb: Update regulatory rules for South Korea (KR)
e427ff2 wireless-regdb: Update regulatory rules for China (CN)
0970116 wireless-regdb: Update regulatory rules for the Netherlands (NL) on 6GHz
4dac44b wireless-regdb: update regulatory database based on preceding changes

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-02-20 13:47:57 +09:00
Sungbo Eo
3e3e78de11 ath79: utilize nvmem on Netgear EX7300 v2
mtd-mac-address should no longer be used after commit 5ae2e78639
("kernel: drop support for mtd-mac-address"). Convert it to nvmem-cells.

While at it, also convert OpenWrt's custom mtd-cal-data property and
userspace pre-calibration data extraction to the nvmem implementation.

Note: nvmem-cells in QCN5502 wmac has not been tested.

Fixes: c32008a37b ("ath79: add partial support for Netgear EX7300v2")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-02-20 13:45:06 +09:00
Christian Lamparter
b0d5939b80 apm821xx: WNDR4700: use upstream tc654 cooling devices
Upstream hwmon-maintainer had various comments about
the changes to the tc654 driver. These have been
addressed and the cooling device support is destined
for inclusion.

One of the comments was the change of the cooling states
scaling. No longer the driver uses the same values as the
hwmon interface, instead the states are now the 17 states
the tc654 supports.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-19 19:34:18 +01:00
Christian Lamparter
2aa97ecb59 kernel: add kmod-hwmon-lm70 support
package hwmon's lm70.ko. This module supports the
National Semiconductor/TI LM70,LM71,LM74 and
TI TMP121,TMP122,TMP123 and TMP124 chips (all SPI).

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-19 19:34:18 +01:00
Christian Lamparter
2db231e77a mpc85xx: add HiveAP-350 alternative name for HiveAP-330
The HiveAP-350 has six external antennas connectors.
(It also has twice the flash?)

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-19 19:34:18 +01:00
Christian Lamparter
256e1dbc7d mpc85xx: utilize dt-binding definitions for keys + gpios
include the device-tree binding headers that provide definitions
for keys codes and gpios in the device-tree files.

Random bonus: merge tl-wdr4900-v1's uboot with the nvmem-node.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-19 19:34:18 +01:00