Rafał Miłecki
c382fe857d
bcm4908: update Ethernet driver
...
Use the latest version sent upsteram.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-02-10 11:28:04 +01:00
John Audia
f3b827a965
kernel: bump 5.4 to 5.4.96
...
Ran update_kernel.sh in a fresh clone without any existing toolchains.
Build system: x86_64
Build-tested: ipq806x/R7800, bcm27xx/bcm2711
Run-tested: ipq806x/R7800
Run-tested [*]: ramips/mt7621 (R6800, DIR-878 A1, EAP235-Wall)
Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
2021-02-08 16:34:18 +01:00
Rafał Miłecki
81240a9b89
bcm4908: add Ethernet driver
...
This commit picks up pending netdev patches.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-02-08 11:49:21 +01:00
Rafał Miłecki
3bd8f660a4
bcm4908: workaround NAND controller #WP issue
...
There seems to be a problem with setting #WP. On the other hand ignoring
the #WP seems to work. rootfs_data UBI volume seems to persist changes.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-21 13:30:20 +01:00
Rafał Miłecki
e6fb4d08a1
bcm4908: add DTS patches for USB PHY and partitions
...
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-20 22:00:22 +01:00
Rafał Miłecki
bc3dbd68c4
bcm4908: use backported brcmstb soc stubs patch
...
Final version differs slightly - uses IS_ENABLED()
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-20 22:00:18 +01:00
Rafał Miłecki
707ad89f06
bcm4908: use backported switch & PMB DTS patches
...
Final versions differ slightly from what was used initially.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-20 22:00:15 +01:00
Rafał Miłecki
20a0d435d8
bcm4908: add pending mtd patches for BCM4908 partitioning
...
BCM4908 can have multiple firmware partitions. MTD needs to detect which
one is currently used.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-20 07:47:29 +01:00
Rafał Miłecki
6c90999e2e
bcm4908: backport brcmstb USB PHY driver changes
...
This includes BCM4908 support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-14 12:34:20 +01:00
Rafał Miłecki
7e4f055990
bcm4908: backport BCM4908 integrated switch initial support
...
Upstream driver supports bridging ports. There is no support for
crossbar setup or CPU port(s) yet.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-13 11:28:41 +01:00
Rafał Miłecki
56d64d8b5a
bcm4908: backport PMB (Power Management Bus) driver
...
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-13 07:44:04 +01:00
Rafał Miłecki
524b9aeb4c
bcm4908: add simple PCIe reset controller support
...
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-12 23:27:29 +01:00
Rafał Miłecki
712258b772
bcm4908: backport upstream DTS patches
...
1. Netgear R8000P DTS file
2. NAND fix
3. PCIe reset block
4. Integrated switch
5. PMB block
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-12 23:07:10 +01:00
Rafał Miłecki
c578fdfc29
bcm4908: initial work on the Broadcom BCM4908 target
...
BCM4906, BCM4908 and BCM49408 are SoCs with 64 bit ARMv8 B53 CPUs.
Upstream Linux is slowly getting support for that SoCs family so it
makes sense to add target for it.
This prepares initial support for:
1. Asus GT-AC5300
BCM4908 based device (4 CPUs) with 1024 MiB RAM, NAND, 8 LAN ports.
2. Netgear R8000P
BCM4906 based device (2 CPUs) with 512 MiB RAM, NAND, 4 LAN ports.
Flashing info will come later as we learn how to generate proper images.
It isn't usable yet (it only produces a bootable kernel) so "source-only"
is used.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-12 21:10:51 +01:00
