Commit Graph

18975 Commits

Author SHA1 Message Date
Etienne Champetier
39d50a2008 iptables: move libiptext* to their own packages
iptables-nft doesn't depend on libip{4,6}tc, so move
libiptext* libs in their own packages to clean up dependencies
Rename libxtables-nft to libiptext-nft

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-02-28 21:52:01 +01:00
Etienne Champetier
795e7155cb iptables: rename to ip(6)tables-legacy, add PROVIDES
Using PROVIDES allows to have other packages continue to
depend on iptables and users to pick between legacy and nft
version.

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-02-28 21:52:01 +01:00
Etienne Champetier
316c406e62 iptables: move IPTABLES_{CONNLABEL,NFTABLES} to libxtables
Those 2 configs are not specific to iptables(-legacy)

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-02-28 21:52:01 +01:00
Etienne Champetier
d35a573004 iptables: make mod depend on libxtables
'iptables-mod-' can be used directly by firewall3, by
iptables and by iptables-nft. They are not linked to
iptables but to libxtables, so fix the dependencies to allow
to remove iptables(-legacy)

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-02-28 21:52:01 +01:00
Etienne Champetier
50d3271966 iptables: fix libnftnl/IPTABLES_NFTABLES dependency
libxtables doesn't depend on libnftnl, iptables-nft does,
so move the dependency to not pull libnftnl with firewall3/iptables-legacy

Also libxtables-nft depends on IPTABLES_NFTABLES

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-02-28 21:52:01 +01:00
Stijn Tintel
58212a6194 ubus: bump to git HEAD
66baa44 libubus: introduce new status messages
  b3cd5ab cli: use UBUS_STATUS_PARSE_ERROR
  584f56a cli: improve error logging for call command

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-02-28 16:18:37 +02:00
Yousong Zhou
43276b60c6 netfilter: add kmod-nft-tproxy
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2022-02-28 10:24:17 +08:00
Yousong Zhou
0225df1ec8 netfilter: add kmod-nft-socket
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2022-02-28 10:24:17 +08:00
Yousong Zhou
4f443c885d netfilter: separate packages for kmod-ipt-socket and kmod-ipt-tproxy
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2022-02-28 10:24:17 +08:00
Piotr Dymacz
2d5b596b49 uboot-envtools: ath79: add support for ALFA Network Tube-2HQ
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2022-02-27 16:54:54 +01:00
Christian Lamparter
1753f8c14b firmware: intel-microcode: update to 20220207
Debians' changelog by Henrique de Moraes Holschuh <hmh@debian.org>:

* upstream changelog: new upstream datafile 20220207
    * Mitigates (*only* when loaded from UEFI firmware through the FIT)
      CVE-2021-0146, INTEL-SA-00528: VT-d privilege escalation through
      debug port, on Pentium, Celeron and Atom processors with signatures
      0x506c9, 0x506ca, 0x506f1, 0x706a1, 0x706a8
      https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/issues/57#issuecomment-1036363145
    * Mitigates CVE-2021-0127, INTEL-SA-00532: an unexpected code breakpoint
      may cause a system hang, on many processors.
    * Mitigates CVE-2021-0145, INTEL-SA-00561: information disclosure due
      to improper sanitization of shared resources (fast-store forward
      predictor), on many processors.
    * Mitigates CVE-2021-33120, INTEL-SA-00589: out-of-bounds read on some
      Atom Processors may allow information disclosure or denial of service
      via network access.
    * Fixes critical errata (functional issues) on many processors
    * Adds a MSR switch to enable RAPL filtering (default off, once enabled
      it can only be disabled by poweroff or reboot).  Useful to protect
      SGX and other threads from side-channel info leak.  Improves the
      mitigation for CVE-2020-8694, CVE-2020-8695, INTEL-SA-00389 on many
      processors.
    * Disables TSX in more processor models.
    * Fixes issue with WBINDV on multi-socket (server) systems which could
      cause resets and unpredictable system behavior.
    * Adds a MSR switch to 10th and 11th-gen (Ice Lake, Tiger Lake, Rocket
      Lake) processors, to control a fix for (hopefully rare) unpredictable
      processor behavior when HyperThreading is enabled.  This MSR switch
      is enabled by default on *server* processors.  On other processors,
      it needs to be explicitly enabled by an updated UEFI/BIOS (with added
      configuration logic).  An updated operating system kernel might also
      be able to enable it.  When enabled, this fix can impact performance.
    * Updated Microcodes:
      sig 0x000306f2, pf_mask 0x6f, 2021-08-11, rev 0x0049, size 38912
      sig 0x000306f4, pf_mask 0x80, 2021-05-24, rev 0x001a, size 23552
      sig 0x000406e3, pf_mask 0xc0, 2021-04-28, rev 0x00ec, size 105472
      sig 0x00050653, pf_mask 0x97, 2021-05-26, rev 0x100015c, size 34816
      sig 0x00050654, pf_mask 0xb7, 2021-06-16, rev 0x2006c0a, size 43008
      sig 0x00050656, pf_mask 0xbf, 2021-08-13, rev 0x400320a, size 35840
      sig 0x00050657, pf_mask 0xbf, 2021-08-13, rev 0x500320a, size 36864
      sig 0x0005065b, pf_mask 0xbf, 2021-06-04, rev 0x7002402, size 28672
      sig 0x00050663, pf_mask 0x10, 2021-06-12, rev 0x700001c, size 28672
      sig 0x00050664, pf_mask 0x10, 2021-06-12, rev 0xf00001a, size 27648
      sig 0x00050665, pf_mask 0x10, 2021-09-18, rev 0xe000014, size 23552
      sig 0x000506c9, pf_mask 0x03, 2021-05-10, rev 0x0046, size 17408
      sig 0x000506ca, pf_mask 0x03, 2021-05-10, rev 0x0024, size 16384
      sig 0x000506e3, pf_mask 0x36, 2021-04-29, rev 0x00ec, size 108544
      sig 0x000506f1, pf_mask 0x01, 2021-05-10, rev 0x0036, size 11264
      sig 0x000606a6, pf_mask 0x87, 2021-12-03, rev 0xd000331, size 291840
      sig 0x000706a1, pf_mask 0x01, 2021-05-10, rev 0x0038, size 74752
      sig 0x000706a8, pf_mask 0x01, 2021-05-10, rev 0x001c, size 75776
      sig 0x000706e5, pf_mask 0x80, 2021-05-26, rev 0x00a8, size 110592
      sig 0x000806a1, pf_mask 0x10, 2021-09-02, rev 0x002d, size 34816
      sig 0x000806c1, pf_mask 0x80, 2021-08-06, rev 0x009a, size 109568
      sig 0x000806c2, pf_mask 0xc2, 2021-07-16, rev 0x0022, size 96256
      sig 0x000806d1, pf_mask 0xc2, 2021-07-16, rev 0x003c, size 101376
      sig 0x000806e9, pf_mask 0x10, 2021-04-28, rev 0x00ec, size 104448
      sig 0x000806e9, pf_mask 0xc0, 2021-04-28, rev 0x00ec, size 104448
      sig 0x000806ea, pf_mask 0xc0, 2021-04-28, rev 0x00ec, size 103424
      sig 0x000806eb, pf_mask 0xd0, 2021-04-28, rev 0x00ec, size 104448
      sig 0x000806ec, pf_mask 0x94, 2021-04-28, rev 0x00ec, size 104448
      sig 0x00090661, pf_mask 0x01, 2021-09-21, rev 0x0015, size 20480
      sig 0x000906c0, pf_mask 0x01, 2021-08-09, rev 0x2400001f, size 20480
      sig 0x000906e9, pf_mask 0x2a, 2021-04-29, rev 0x00ec, size 106496
      sig 0x000906ea, pf_mask 0x22, 2021-04-28, rev 0x00ec, size 102400
      sig 0x000906eb, pf_mask 0x02, 2021-04-28, rev 0x00ec, size 104448
      sig 0x000906ec, pf_mask 0x22, 2021-04-28, rev 0x00ec, size 103424
      sig 0x000906ed, pf_mask 0x22, 2021-04-28, rev 0x00ec, size 103424
      sig 0x000a0652, pf_mask 0x20, 2021-04-28, rev 0x00ec, size 93184
      sig 0x000a0653, pf_mask 0x22, 2021-04-28, rev 0x00ec, size 94208
      sig 0x000a0655, pf_mask 0x22, 2021-04-28, rev 0x00ee, size 94208
      sig 0x000a0660, pf_mask 0x80, 2021-04-28, rev 0x00ea, size 94208
      sig 0x000a0661, pf_mask 0x80, 2021-04-29, rev 0x00ec, size 93184
      sig 0x000a0671, pf_mask 0x02, 2021-08-29, rev 0x0050, size 102400
    * Removed Microcodes:
      sig 0x00080664, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048
      sig 0x00080665, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048
  * update .gitignore and debian/.gitignore.
    Add some missing items from .gitignore and debian/.gitignore.
  * ucode-blacklist: do not late-load 0x406e3 and 0x506e3.
    When the BIOS microcode is older than revision 0x7f (and perhaps in some
    other cases as well), the latest microcode updates for 0x406e3 and
    0x506e3 must be applied using the early update method.  Otherwise, the
    system might hang.  Also: there must not be any other intermediate
    microcode update attempts [other than the one done by the BIOS itself],
    either.  It must go from the BIOS microcode update directly to the
    latest microcode update.
  * source: update symlinks to reflect id of the latest release, 20220207

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-26 19:52:41 +01:00
Sergey V. Lobanov
e6a4f30ed7 iucode-tool: fix host-compile on macos and non-x86 linux
iucode-tool/host is used by intel-microcode to manipulate with
microcode.bin file. iucode-tool requires cpuid.h at compile time
for autodection feature, but non-x86 build hosts does not have
this header file (e.g. ubuntu 20.04 aarch64) or this header
generates compile time error (#error macro) (e.g. macos arm64).

This patch provides compat cpuid.h to build iucode-tool/host on
non-x86 linux hosts and macos. CPU autodectection is not required
for intel-microcode package build so compat cpuid.h is ok for
OpenWrt purposes.

glibc and argp lib are not present in macos so iucode-tool/host
build fails. This patch adds argp-standalone/host as build
dependency if host os is macos.

Generated ucode (intel-microcode package) is exactly the same on
Linux x86_64 (Ubuntu 20.04), Linux aarch64 (Ubuntu 20.04) and
Darwin arm64 (MacOS 11.6) build hosts.

Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
2022-02-26 19:52:41 +01:00
Sergey V. Lobanov
64d159cdad argp-standalone: add host-compile ability
This patch adds host-compile ability to argp-standalone for build
hosts without glibc and argp lib, e.g. MacOS.

iucode-tool/host can not be built on MacOS due to lack of argp.

Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
2022-02-26 19:52:41 +01:00
Lucian Cristian
fbf485e6c6 mbedtls: update to 2.28.0 LTS branch
<https://github.com/ARMmbed/mbedtls/releases/tag/v2.28.0>
"Mbed TLS 2.28 is a long-time support branch.
It will be supported with bug-fixes and security
fixes until end of 2024."

<https://github.com/ARMmbed/mbedtls/blob/development/BRANCHES.md>
"Currently, the only supported LTS branch is: mbedtls-2.28.
For a short time we also have the previous LTS, which has
recently ended its support period, mbedtls-2.16.
This branch will move into the archive namespace around the
time of the next release."

this will also add support for uacme ualpn support.

size changes
221586 libmbedtls12_2.28.0-1_mips_24kc.ipk
182742 libmbedtls12_2.16.12-1_mips_24kc.ipk

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
(remark about 2.16's EOS, slightly reworded)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-26 19:52:41 +01:00
Lech Perczak
7ac8da0060 ath79: support ZTE MF286A/R
ZTE MF286A and MF286R are indoor LTE category 6/7 CPE router with simultaneous
dual-band 802.11ac plus 802.11n Wi-Fi radios and quad-port gigabit
Ethernet switch, FXS and external USB 2.0 port.

Hardware highlights:
- CPU: QCA9563 SoC at 775MHz,
- RAM: 128MB DDR2,
- NOR Flash: MX25L1606E 2MB SPI Flash, for U-boot only,
- NAND Flash: W25N01GV 128MB SPI NAND-Flash, for all other data,
- Wi-Fi 5GHz: QCA9886 2x2 MIMO 802.11ac Wave2 radio,
- WI-Fi 2.4GHz: QCA9563 3x3 MIMO 802.11n radio,
- Switch: QCA8337v2 4-port gigabit Ethernet, with single SGMII CPU port,
- WWAN:
  [MF286A] MDM9230-based category 6 internal LTE modem
  [MF286R] PXA1826-based category 7 internal LTE modem
  in extended  mini-PCIE form factor, with 3 internal antennas and
  2 external antenna connections, single mini-SIM slot.
- FXS: one external ATA port (handled entirely by modem part) with two
  physical connections in parallel,
- USB: Single external USB 2.0 port,
- Switches: power switch, WPS, Wi-Fi and reset buttons,
- LEDs: Wi-Fi, Test (internal). Rest of LEDs (Phone, WWAN, Battery,
  Signal state) handled entirely by modem. 4 link status LEDs handled by
  the switch on the backside.
- Battery: 3Ah 1-cell Li-Ion replaceable battery, with charging and
  monitoring handled by modem.
- Label MAC device: eth0

The device shares many components with previous model, MF286, differing
mostly by a Wave2 5GHz radio, flash layout and internal LED color.
In case of MF286A, the modem is the same as in MF286. MF286R uses a
different modem based on Marvell PXA1826 chip.

Internal modem of MF286A is supported via uqmi, MF286R modem isn't fully
supported, but it is expected to use comgt-ncm for connection, as it
uses standard 3GPP AT commands for connection establishment.

Console connection: connector X2 is the console port, with the following
pinout, starting from pin 1, which is the topmost pin when the board is
upright:
- VCC (3.3V). Do not use unless you need to source power for the
  converer from it.
- TX
- RX
- GND
Default port configuration in U-boot as well as in stock firmware is
115200-8-N-1.

Installation:
Due to different flash layout from stock firmware, sysupgrade from
within stock firmware is impossible, despite it's based on QSDK which
itself is based on OpenWrt.

STEP 0: Stock firmware update:
As installing OpenWrt cuts you off from official firmware updates for
the modem part, it is recommended to update the stock firmware to latest
version before installation, to have built-in modem at the latest firmware
version.

STEP 1: gaining root shell:

Method 1:
This works if busybox has telnetd compiled in the binary.
If this does not work, try method 2.

Using well-known exploit to start telnetd on your router - works
only if Busybox on stock firmware has telnetd included:
- Open stock firmware web interface
- Navigate to "URL filtering" section by going to "Advanced settings",
  then "Firewall" and finally "URL filter".
- Add an entry ending with "&&telnetd&&", for example
  "http://hostname/&&telnetd&&".
- telnetd will immediately listen on port 4719.
- After connecting to telnetd use "admin/admin" as credentials.

Method 2:
This works if busybox does not have telnetd compiled in. Notably, this
is the case in DNA.fi firmware.
If this does not work, try method 3.

- Set IP of your computer to 192.168.0.22. (or appropriate subnet if
  changed)
- Have a TFTP server running at that address
- Download MIPS build of busybox including telnetd, for example from:
  https://busybox.net/downloads/binaries/1.21.1/busybox-mips
  and put it in it's root directory. Rename it as "telnetd".
- As previously, login to router's web UI and navigate to "URL
  filtering"
- Using "Inspect" feature, extend "maxlength" property of the input
  field named "addURLFilter", so it looks like this:
  <input type="text" name="addURLFilter" id="addURLFilter" maxlength="332"
    class="required form-control">
- Stay on the page - do not navigate anywhere
- Enter "http://aa&zte_debug.sh 192.168.0.22 telnetd" as a filter.
- Save the settings. This will download the telnetd binary over tftp and
  execute it. You should be able to log in at port 23, using
  "admin/admin" as credentials.

Method 3:
If the above doesn't work, use the serial console - it exposes root shell
directly without need for login. Some stock firmwares, notably one from
finnish DNA operator lack telnetd in their builds.

STEP 2: Backing up original software:
As the stock firmware may be customized by the carrier and is not
officially available in the Internet, IT IS IMPERATIVE to back up the
stock firmware, if you ever plan to returning to stock firmware.
It is highly recommended to perform backup using both methods, to avoid
hassle of reassembling firmware images in future, if a restore is
needed.

Method 1: after booting OpenWrt initramfs image via TFTP:
PLEASE NOTE: YOU CANNOT DO THIS IF USING INTERMEDIATE FIRMWARE FOR INSTALLATION.
- Dump stock firmware located on stock kernel and ubi partitions:

  ssh root@192.168.1.1: cat /dev/mtd4 > mtd4_kernel.bin
  ssh root@192.168.1.1: cat /dev/mtd9 > mtd9_ubi.bin

And keep them in a safe place, should a restore be needed in future.

Method 2: using stock firmware:
- Connect an external USB drive formatted with FAT or ext4 to the USB
  port.
- The drive will be auto-mounted to /var/usb_disk
- Check the flash layout of the device:

  cat /proc/mtd

  It should show the following:
  mtd0: 000a0000 00010000 "u-boot"
  mtd1: 00020000 00010000 "u-boot-env"
  mtd2: 00140000 00010000 "reserved1"
  mtd3: 000a0000 00020000 "fota-flag"
  mtd4: 00080000 00020000 "art"
  mtd5: 00080000 00020000 "mac"
  mtd6: 000c0000 00020000 "reserved2"
  mtd7: 00400000 00020000 "cfg-param"
  mtd8: 00400000 00020000 "log"
  mtd9: 000a0000 00020000 "oops"
  mtd10: 00500000 00020000 "reserved3"
  mtd11: 00800000 00020000 "web"
  mtd12: 00300000 00020000 "kernel"
  mtd13: 01a00000 00020000 "rootfs"
  mtd14: 01900000 00020000 "data"
  mtd15: 03200000 00020000 "fota"
  mtd16: 01d00000 00020000 "firmware"

  Differences might indicate that this is NOT a MF286A device but
  one of other variants.
- Copy over all MTD partitions, for example by executing the following:

  for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15; do cat /dev/mtd$i > \
  /var/usb_disk/mtd$i; done

  "Firmware" partition can be skipped, it is a concatenation
  of "kernel" and "rootfs".

- If the count of MTD partitions is different, this might indicate that
  this is not a MF286A device, but one of its other variants.
- (optionally) rename the files according to MTD partition names from
  /proc/mtd
- Unmount the filesystem:

  umount /var/usb_disk; sync

  and then remove the drive.
- Store the files in safe place if you ever plan to return to stock
  firmware. This is especially important, because stock firmware for
  this device is not available officially, and is usually customized by
  the mobile providers.

STEP 3: Booting initramfs image:

Method 1: using serial console (RECOMMENDED):
- Have TFTP server running, exposing the OpenWrt initramfs image, and
  set your computer's IP address as 192.168.0.22. This is the default
  expected by U-boot. You may wish to change that, and alter later
  commands accordingly.
- Connect the serial console if you haven't done so already,
- Interrupt boot sequence by pressing any key in U-boot when prompted
- Use the following commands to boot OpenWrt initramfs through TFTP:

  setenv serverip 192.168.0.22
  setenv ipaddr 192.168.0.1
  tftpboot 0x81000000 openwrt-ath79-nand-zte_mf286a-initramfs-kernel.bin
  bootm 0x81000000

  (Replace server IP and router IP as needed). There is no  emergency
  TFTP boot sequence triggered by buttons, contrary to MF283+.
- When OpenWrt initramfs finishes booting, proceed to actual
  installation.

Method 2: using initramfs image as temporary boot kernel
This exploits the fact, that kernel and rootfs MTD devices are
consecutive on NAND flash, so from within stock image, an initramfs can
be written to this area and booted by U-boot on next reboot, because it
uses "nboot" command which isn't limited by kernel partition size.
- Download the initramfs-kernel.bin image
- After backing up the previous MTD contents, write the images to the
  "firmware" MTD device, which conveniently concatenates "kernel" and
  "rootfs" partitions that can fit the initramfs image:

  nandwrite -p /dev/<firmware-mtd> \
  /var/usb_disk/openwrt-ath79-zte_mf286a-initramfs-kernel.bin

- If write is OK, reboot the device, it will reboot to OpenWrt
  initramfs:

  reboot -f

- After rebooting, SSH into the device and use sysupgrade to perform
  proper installation.

Method 3: using built-in TFTP recovery (LAST RESORT):
- With that method, ensure you have complete backup of system's NAND
  flash first. It involves deliberately erasing the kernel.
- Download "-initramfs-kernel.bin" image for the device.
- Prepare the recovery image by prepending 8MB of zeroes to the image,
  and name it root_uImage:

  dd if=/dev/zero of=padding.bin bs=8M count=1

  cat padding.bin openwrt-ath79-nand-zte_mf286a-initramfs-kernel.bin >
  root_uImage

- Set up a TFTP server at 192.0.0.1/8. Router will use random address
  from that range.
- Put the previously generated "root_uImage" into TFTP server root
  directory.
- Deliberately erase "kernel" partition" using stock firmware after
  taking backup. THIS IS POINT OF NO RETURN.
- Restart the device. U-boot will attempt flashing the recovery
  initramfs image, which will let you perform actual installation using
  sysupgrade. This might take a considerable time, sometimes the router
  doesn't establish Ethernet link properly right after booting. Be
  patient.
- After U-boot finishes flashing, the LEDs of switch ports will all
  light up. At this moment, perform power-on reset, and wait for OpenWrt
  initramfs to finish booting. Then proceed to actual installation.

STEP 4: Actual installation:
- Set your computer IP to 192.168.1.22/24
- scp the sysupgrade image to the device:

  scp openwrt-ath79-nand-zte_mf286a-squashfs-sysupgrade.bin \
  root@192.168.1.1:/tmp/

- ssh into the device and execute sysupgrade:

  sysupgrade -n /tmp/openwrt-ath79-nand-zte_mf286a-squashfs-sysupgrade.bin

- Wait for router to reboot to full OpenWrt.

STEP 5: WAN connection establishment
Since the router is equipped with LTE modem as its main WAN interface, it
might be useful to connect to the Internet right away after
installation. To do so, please put the following entries in
/etc/config/network, replacing the specific configuration entries with
one needed for your ISP:

config interface 'wan'
        option proto 'qmi'
        option device '/dev/cdc-wdm0'
        option auth '<auth>' # As required, usually 'none'
        option pincode '<pin>' # If required by SIM
        option apn '<apn>' # As required by ISP
        option pdptype '<pdp>' # Typically 'ipv4', or 'ipv4v6' or 'ipv6'

For example, the following works for most polish ISPs
config interface 'wan'
        option proto 'qmi'
        option device '/dev/cdc-wdm0'
        option auth 'none'
        option apn 'internet'
        option pdptype 'ipv4'

The required minimum is:
config interface 'wan'
        option proto 'qmi'
        option device '/dev/cdc-wdm0'
In this case, the modem will use last configured APN from stock
firmware - this should work out of the box, unless your SIM requires
PIN which can't be switched off.

If you have build with LuCI, installing luci-proto-qmi helps with this
task.

Restoring the stock firmware:

Preparation:
If you took your backup using stock firmware, you will need to
reassemble the partitions into images to be restored onto the flash. The
layout might differ from ISP to ISP, this example is based on generic stock
firmware
The only partitions you really care about are "web", "kernel", and
"rootfs". These are required to restore the stock firmware through
factory TFTP recovery.

Because kernel partition was enlarged, compared to stock
firmware, the kernel and rootfs MTDs don't align anymore, and you need
to carve out required data if you only have backup from stock FW:
- Prepare kernel image
  cat mtd12_kernel.bin mtd13_rootfs.bin > owrt_kernel.bin
  truncate -s 4M owrt_kernel_restore.bin
- Cut off first 1MB from rootfs
  dd if=mtd13_rootfs.bin of=owrt_rootfs.bin bs=1M skip=1
- Prepare image to write to "ubi" meta-partition:
  cat mtd6_reserved2.bi mtd7_cfg-param.bin mtd8_log.bin mtd9_oops.bin \
  mtd10_reserved3.bin mtd11_web.bin owrt_rootfs.bin > \
  owrt_ubi_ubi_restore.bin

You can skip the "fota" partition altogether,
it is used only for stock firmware update purposes and can be overwritten
safely anyway. The same is true for "data" partition which on my device
was found to be unused at all. Restoring mtd5_cfg-param.bin will restore
the stock firmware configuration you had before.

Method 1: Using initramfs:
This method is recmmended if you took your backup from within OpenWrt
initramfs, as the reassembly is not needed.
- Boot to initramfs as in step 3:
- Completely detach ubi0 partition using ubidetach /dev/ubi0_0
- Look up the kernel and ubi partitions in /proc/mtd
- Copy over the stock kernel image using scp to /tmp
- Erase kernel and restore stock kernel:
  (scp mtd4_kernel.bin root@192.168.1.1:/tmp/)
  mtd write <kernel_mtd> mtd4_kernel.bin
  rm mtd4_kernel.bin
- Copy over the stock partition backups one-by-one using scp to /tmp, and
  restore them individually. Otherwise you might run out of space in
  tmpfs:

  (scp mtd3_ubiconcat0.bin root@192.168.1.1:/tmp/)

  mtd write <ubiconcat0_mtd> mtd3_ubiconcat0.bin
  rm mtd3_ubiconcat0.bin

  (scp mtd5_ubiconcat1.bin root@192.168.1.1:/tmp/)

  mtd write <ubiconcat1_mtd> mtd5_ubiconcat1.bin
  rm mtd5_ubiconcat1.bin

- If the write was correct, force a device reboot with

  reboot -f

Method 2: Using live OpenWrt system (NOT RECOMMENDED):
- Prepare a USB flash drive contatining MTD backup files
- Ensure you have kmod-usb-storage and filesystem driver installed for
  your drive
- Mount your flash drive

  mkdir /tmp/usb

  mount /dev/sda1 /tmp/usb

- Remount your UBI volume at /overlay to R/O

  mount -o remount,ro /overlay

- Write back the kernel and ubi partitions from USB drive

  cd /tmp/usb
  mtd write mtd4_kernel.bin /dev/<kernel_mtd>

  mtd write mtd9_ubi.bin /dev/<kernel_ubi>

- If everything went well, force a device reboot with
  reboot -f

Last image may be truncated a bit due to lack of space in RAM, but this will happen over "fota"
MTD partition which may be safely erased after reboot anyway.

Method 3: using built-in TFTP recovery:
This method is recommended if you took backups using stock firmware.
- Assemble a recovery rootfs image from backup of stock partitions by
  concatenating "web", "kernel", "rootfs" images dumped from the device,
  as "root_uImage"
- Use it in place of "root_uImage" recovery initramfs image as in the
  TFTP pre-installation method.

Quirks and known issuesa
- It was observed, that CH340-based USB-UART converters output garbage
  during U-boot phase of system boot. At least CP2102 is known to work
  properly.
- Kernel partition size is increased to 4MB compared to stock 3MB, to
  accomodate future kernel updates - at this moment OpenWrt 5.10 kernel
  image is at 2.5MB which is dangerously close to the limit. This has no
  effect on booting the system - but keep that in mind when reassembling
  an image to restore stock firmware.
- uqmi seems to be unable to change APN manually, so please use the one
  you used before in stock firmware first. If you need to change it,
  please use protocok '3g' to establish connection once, or use the
  following command to change APN (and optionally IP type) manually:
  echo -ne 'AT+CGDCONT=1,"IP","<apn>' > /dev/ttyUSB0
- The only usable LED as a "system LED" is the blue debug LED hidden
  inside the case. All other LEDs are controlled by modem, on which the
  router part has some influence only on Wi-Fi LED.
- Wi-Fi LED currently doesn't work while under OpenWrt, despite having
  correct GPIO mapping. All other LEDs are controlled by modem,
  including this one in stock firmware. GPIO19, mapped there only acts
  as a gate, while the actual signal source seems to be 5GHz Wi-Fi
  radio, however it seems it is not the LED exposed by ath10k as
  ath10k-phy0.
- GPIO5 used for modem reset is a suicide switch, causing a hardware
  reset of whole board, not only the modem. It is attached to
  gpio-restart driver, to restart the modem on reboot as well, to ensure
  QMI connectivity after reboot, which tends to fail otherwise.
- Modem, as in MF283+, exposes root shell over ADB - while not needed
  for OpenWrt operation at all - have fun lurking around.
  The same modem module is used as in older MF286.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2022-02-26 17:46:10 +01:00
Petr Štetiar
104e912c27 usbmode: update to version 2022-02-24
* usbmode: add config #0 and delay before actual config

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-02-26 13:36:30 +01:00
Vladislav Grigoryev
abd18bd033 jsonfilter: update makefile url
Specify URL as PKG_SOURCE_URL in the jsonfilter Makefile.

Signed-off-by: Vladislav Grigoryev <vg.aetera@gmail.com>
2022-02-26 13:36:30 +01:00
Christian Lamparter
e126a1e413 mac80211: add #if guards against 5.4 compile failures
Both struct net_device_path_ctx and struct net_device_path
are not available in 5.4. This causes an build error on the
bcm63xx target.

|mac80211/driver-ops.h: In function 'drv_net_fill_forward_path':
|driver-ops.h:1502:57: error: passing argument 4 of
|'local->ops->net_fill_forward_path' from incompatible pointer type
| [-Werror=incompatible-pointer-types]
| 1502 |                          ctx, path);
|      |                          ^~~
|      |                            |
|      |                         struct net_device_path_ctx *

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-25 17:27:28 +01:00
Hannu Nyman
97158fe10e kernel: package ramoops pstore-ram crash log storage
Package the ability to log kernel crashes to 'ramoops' pstore
files into RAM in /sys/fs/pstore

Reference to the ramoops admin guide in upstream Linux:
https://www.kernel.org/doc/html/v5.10/admin-guide/ramoops.html

The files in RAM survive a warm reboot, but not a cold reboot.

Note: kmod-ramoops selects kmod-pstore and kmod-reed-solomon.

The feature can be used by selecting the kmod-ramoops and
adding a ramoops reserved-memory definition to the device DTS.
Example from R7800:

       reserved-memory {
                rsvd@5fe00000 {
                        reg = <0x5fe00000 0x200000>;
                        reusable;
                };

                ramoops@42100000 {
                        compatible = "ramoops";
                        reg = <0x42100000 0x40000>;
                        record-size = <0x4000>;
                        console-size = <0x4000>;
                        ftrace-size = <0x4000>;
                        pmsg-size = <0x4000>;
                };
        };

If no definition has been made in DTS, no crash log is stored
for the device.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(added CONFIG_EFI_VARS_PSTORE disable)
2022-02-24 20:45:12 +01:00
Jax Jiang
1050e66c8f x86: grub2: search for the "kernel" filesystem on all disks
Previously, grub2 was hardcoded to always look on "hd0" for the
kernel.

This works well when the system only had a single disk.
But if there was a second disk/stick present, it may have look
on the wrong drive because of enumeration races.

This patch utilizes grub2 search function to look for a filesystem
with the label "kernel". This works thanks to existing setup in
scripts/gen_image_generic.sh. Which sets the "kernel" label on
both the fat and ext4 filesystem variants.

Signed-off-by: Jax Jiang <jax.jiang.007@gmail.com>
Suggested-by: Alberto Bursi <bobafetthotmail@gmail.com> (MX100 WA)
(word wrapped, slightly rewritten commit message, removed MX100 WA)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-24 20:45:12 +01:00
Claudiu Beznea
3e53eec589 at91: add support for sama7g5-ek board
Add support for SAMA7G5-EK board.
Hardware:
- SoC: SAMA7G5
- RAM: Aliance Memory AS4C256M16D3LC (4 Gbit DDR3L)
- SD/MMC: 1 standard 4bit SD Card interface
- USB: 1 Micro-AB host/device, 1 Type-A host, 1 Type-C host
- CAN: 2 interfaces
- Ethernet: 10/100 port, 1Gbps port
- Wi-Fi/BT: 1 optional interface
- Audio: 1 SPDIF RX port, 1 SPDIF TX port, 4 digital microphones
- Camera: 1 RPi CSI camera interface
- Debug: 1 J-Link-OB + CDC, 1 JTAG
- LEDs: 1 RGB
- Buttons: 4 push buttons
- Expansions: 1 RPi Expansion connector, 2 mikroBUS connectors
- Power management: 1 power management IC, 1 power consumption
  measurement device

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-02-24 19:05:29 +01:00
Claudiu Beznea
3ed992a996 uboot-at91: update to linux4sam-2021.10
Update uboot-at91 to linux4sam-2021.10 version.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-02-24 19:05:28 +01:00
Claudiu Beznea
bf13b2da2a at91bootstrap: update to v3.10.4, v4.0.1
AT91Bootstrap version 4 is available only for SAM9X60, SAMA5D2, SAMA5D3,
SAMA5D4, SAMA7G5. Thus use v4.0.1 for the above targets and v3.10.4 for
the rest of them. With the switch to v4 AT91Bootstrap binaries are now
on build/binaries. Take also this into account. Also, patches directory
is not needed anymore with the version update.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-02-24 19:05:28 +01:00
Rucke Teg
e040d31177 base-file: remove password aging feature form /etc/shadow
In the default shadow file, as visible in the failsafe mode, the user
root has value of `0` set in  the 3rd field, the date of last password
change. This setting means that the password needs to be changed the
next time the user will log in the system. `dropbear` server is ignoring
this setting but `openssh-server` tries to enforce it and fails in the
failsafe mode because the rootfs is R/O.

Disable the password aging feature for user root by setting the 3rd
filed empty.

Signed-off-by: Rucke Teg <rucketeg@protonmail.com>
2022-02-24 18:10:30 +01:00
Nick Lowe
e8d048c5e0 hostapd: SAE - Enable hunting-and-pecking and H2E
Enable both the hunting-and-pecking loop and hash-to-element mechanisms
by default in OpenWRT with SAE.

Commercial Wi-Fi solutions increasingly frequently now ship with both
hunting-and-pecking and hash-to-element (H2E) enabled by default as this
is more secure and more performant than offering hunting-and-pecking
alone for H2E capable clients.

The hunting and pecking loop mechanism is inherently fragile and prone to
timing-based side channels in its design and is more computationally
intensive to perform. Hash-to-element (H2E) is its long-term
replacement to address these concerns.

For clients that only support the hunting-and-pecking loop mechanism,
this is still available to use by default.

For clients that in addition support, or were to require, the
hash-to-element (H2E) mechanism, this is then available for use.

Signed-off-by: Nick Lowe <nick.lowe@gmail.com>
2022-02-24 18:04:05 +01:00
Petr Štetiar
b9251e3b40 wolfssl: fix API breakage of SSL_get_verify_result
Backport fix for API breakage of SSL_get_verify_result() introduced in
v5.1.1-stable.  In v4.8.1-stable SSL_get_verify_result() used to return
X509_V_OK when used on LE powered sites or other sites utilizing
relaxed/alternative cert chain validation feature. After an update to
v5.1.1-stable that API calls started returning X509_V_ERR_INVALID_CA
error and thus rendered all such connection attempts imposible:

 $ docker run -it openwrt/rootfs:x86_64-21.02.2 sh -c "wget https://letsencrypt.org"
 Downloading 'https://letsencrypt.org'
 Connecting to 18.159.128.50:443
 Connection error: Invalid SSL certificate

Fixes: #9283
References: https://github.com/wolfSSL/wolfssl/issues/4879
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-02-22 20:27:15 +01:00
Daniel Golle
2baded9ecc
base-files: make sure tools are present in sysupgrade ramdisk
Not all targets create /var/lock or touch /var/lock/fw_printenv.lock in
their platform.sh. This is problematic as fw_printenv then fails in
case /var/lock/fw_printenv.lock has not been created by previous calls
to fw_printenv/fw_setenv before sysupgrade is run.

Targets using fw_printenv/fw_setenv during sysupgrade:
 * ath79/*
 * ipq40xx/*
 * ipq806x/*
 * kirkwood/*
 * layerscape/*
 * mediatek/mt7622
 * mvebu/*
 * ramips/*
 * realtek/*

Targets currently using additional steps in /lib/upgrade/platform.sh
to make sure /var/lock/fw_printenv.lock (or at least /var/lock)
actually exists:
 * ath79/* (openmesh devices)
 * ipq40xx/* (linksys devices)
 * ipq806x/* (linksys devices)
 * kirkwood/* (linksys devices)
 * layerscape/*
 * mvebu/cortexa9 (linksys devices)

Given that accessing the U-Boot environment during sysupgrade is not
uncommon and the situation across targets is currently quite diverse,
just make sure both tools as well fw_env.config are always copied to
the ramdisk used for sysupgrade. Also make sure /var/lock always
exists.

This now allows to remove copying of fw_printenv/fw_setenv as well as
fw_env.config, creation of /var/lock or even /var/lock/fw_printenv.lock
from lib/upgrade/platform.sh or files included there.

As the same applies also to 'fwtool' which is used by generic eMMC
sysupgrade, also always copy that to ramdisk.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-02-22 19:16:03 +00:00
Eneas U de Queiroz
0134f845da openssl: configure engines with uci
This uses uci to configure engines, by generating a list of enabled
engines in /var/etc/ssl/engines.cnf from engines configured in
/etc/config/openssl:

    config engine 'devcrypto'
            option enabled '1'

Currently the only options implemented are 'enabled', which defaults to
true and enables the named engine, and the 'force' option, that enables
the engine even if the init script thinks the engine does not exist.

The existence test is to check for either a configuration file
/etc/ssl/engines.cnf.d/%ENGINE%.cnf, or a shared object file
/usr/lib/engines-1.1/%ENGINE%.so.

The engine list is generated by an init script which is set to run after
'log' because it informs the engines being enabled or skipped.  It
should run before any service using OpenSSL as the crypto library,
otherwise the service will not use any engine.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2022-02-22 16:37:23 +01:00
Eneas U de Queiroz
30b0351039 openssl: configure engine packages during install
This enables an engine during its package's installation, by adding it
to the engines list in /etc/ssl/engines.cnf.d/engines.cnf.

The engine build system was reworked, with the addition of an engine.mk
file that groups some of the engine packages' definitions, and could be
used by out of tree engines as well.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2022-02-22 16:37:23 +01:00
Eneas U de Queiroz
17a6ca12d3 openssl: config engines in /etc/ssl/engines.cnf.d
This changes the configuration of engines from the global openssl.cnf to
files in the /etc/ssl/engines.cnf.d directory.  The engines.cnf file has
the list of enabled engines, while each engine has its own configuration
file installed under /etc/ssl/engines.cnf.d.

Patches were refreshed with --zero-commit.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2022-02-22 16:37:23 +01:00
Felix Fietkau
cbfce92367 qosify: update to the latest version
65b42032063f interface: add missing autorate-ingress options

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-20 18:13:14 +01:00
Josef Schlehofer
696f0a1cb4 uboot-mvebu: backport pending patches for Marvell A38x
100-ddr-marvell-a38x-fix-BYTE_HOMOGENEOUS_SPLIT_OUT-deci.patch [1]:
SoC Marvell A38x is used in Turris Omnia, and we thought that with recent
fiddling around DDR training to fix it once for all, there were
reproduced the issue in the upcoming new revision Turris Omnia boards.

101-arm-mvebu-spl-Add-option-to-reset-the-board-on-DDR-t.patch [2]:
This is useful when some board may occasionally fail with DDR training,
and it adds the option to reset the board on the DDR training failure

102-arm-mvebu-turris_omnia-Reset-the-board-immediately-o.patch [3]:
This enables the option CONFIG_DDR_RESET_ON_TRAINING_FAILURE (added by
101 patch), so the Turris Omnia board is restarted immediately, and it
does not require to reset the board manually or wait 120s for MCU to
reset the board

[1] https://patchwork.ozlabs.org/project/uboot/patch/20220217000837.13003-1-kabel@kernel.org/
[2] https://patchwork.ozlabs.org/project/uboot/patch/20220217000849.13028-1-kabel@kernel.org/
[3] https://patchwork.ozlabs.org/project/uboot/patch/20220217000849.13028-2-kabel@kernel.org/

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2022-02-20 14:26:42 +01:00
Florian Eckert
808210d992 mac80211: add debug compile option for rtw88 devices
This commit adds the following package compile options.

CONFIG_PACKAGE_RTW88_DEBGUG:
Compile the driver with additional debug logging output

CONFIG_PACKAGE_RTW88_DEBGUGFS:
Add the possibility to map information about the driver rtw88 into
debugfs.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2022-02-20 14:26:40 +01:00
Lech Perczak
411940ded4 ath79: uboot-envtools: fix partition for ZTE MF286
By mistake, a wrong partition for U-boot environment was introduced for
ZTE MF286 while adding support, when flash layout wasn't finalized. Fix
that, according to the actual flash layout:
dev:    size   erasesize  name
mtd0: 00140000 00020000 "fota-flag"
mtd1: 00140000 00020000 "caldata"
mtd2: 00140000 00020000 "mac"
mtd3: 00f40000 00020000 "ubiconcat0"
mtd4: 00400000 00020000 "kernel"
mtd5: 06900000 00020000 "ubiconcat1"
mtd6: 00080000 00010000 "u-boot"
mtd7: 00020000 00010000 "u-boot-env"
mtd8: 07840000 00020000 "ubi"

Fixes: 8c78a13bfc ("ath79: support ZTE MF286")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2022-02-20 14:04:38 +01:00
Petr Štetiar
d8bf730fe0 netifd: bump to version 2022-02-20
Contains following changes:

 136006b88826 cmake: fix usage of implicit library and include paths
 bc0e84d689e2 netifd: interface-ip: don't set fib6 policies if ipv6 disabled

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-02-20 10:52:55 +01:00
Sungbo Eo
19a90262df wireless-regdb: update to version 2022.02.18
e061299 wireless-regdb: Raise DFS TX power limit to 250 mW (24 dBm) for the US
2ce78ed wireless-regdb: Update regulatory rules for Croatia (HR) on 6GHz
0d39f4c wireless-regdb: Update regulatory rules for South Korea (KR)
acad231 wireless-regdb: Update regulatory rules for France (FR) on 6 and 60 GHz
ea83a82 wireless-regdb: add support for US S1G channels
4408149 wireless-regdb: add 802.11ah bands to world regulatory domain
5f3cadc wireless-regdb: Update regulatory rules for Spain (ES) on 6GHz
e0ac69b Revert "wireless-regdb: Update regulatory rules for South Korea (KR)"
40e5e80 wireless-regdb: Update regulatory rules for South Korea (KR)
e427ff2 wireless-regdb: Update regulatory rules for China (CN)
0970116 wireless-regdb: Update regulatory rules for the Netherlands (NL) on 6GHz
4dac44b wireless-regdb: update regulatory database based on preceding changes

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-02-20 13:47:57 +09:00
Christian Lamparter
2aa97ecb59 kernel: add kmod-hwmon-lm70 support
package hwmon's lm70.ko. This module supports the
National Semiconductor/TI LM70,LM71,LM74 and
TI TMP121,TMP122,TMP123 and TMP124 chips (all SPI).

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-19 19:34:18 +01:00
Martin Kennedy
cfe79f2eb8 mpc85xx: Patch HiveAP 330 u-boot to fix boot
When Kernel 5.10 was enabled for mpc85xx, the kernel once again became too
large upon decompression (>7MB or so) to decompress itself on boot (see
FS#4110[1]).

There have been many attempts to fix booting from a compressed kernel on
the HiveAP-330:

- b683f1c36d ("mpc85xx: Use gzip compressed kernel on HiveAP-330")
- 98089bb8ba ("mpc85xx: Use uncompressed kernel on the HiveAP-330")
- 26cb167a5c ("mpc85xx: Fix Aerohive HiveAP-330 initramfs image")

We can no longer compress the kernel due to size, and the stock bootloader
does not support any other types of compression. Since an uncompressed
kernel no longer fits in the 8MiB kernel partition at 0x2840000, we need to
patch u-boot to autoboot by running variable which isn't set by the
bootloader on each autoboot.

This commit repartitions the HiveAP, requiring a new COMPAT_VERSION,
and uses the DEVICE_COMPAT_MESSAGE to guide the user to patch u-boot,
which changes the variable run on boot to be `owrt_boot`; the user can
then set the value of that variable appropriately.

The following has been documented in the device's OpenWrt wiki page:
<https://openwrt.org/toh/aerohive/hiveap-330>. Please look there
first/too for more information.

The from-stock and upgrade from a previous installation now becomes:

0) setup a network with a dhcp server and a tftp server at serverip
(192.168.1.101) with the initramfs image in the servers root directory.

1) Hook into UART (9600 baud) and enter U-Boot. You may need to enter
a password of administrator or AhNf?d@ta06 if prompted. If the password
doesn't work. Try reseting the device by pressing and holding the reset
button with the stock OS.

2) Once in U-Boot, set the new owrt_boot and tftp+boot the initramfs image:
   Use copy and paste!

 # fw_setenv owrt_boot 'setenv bootargs \"console=ttyS0,$baudrate\";bootm 0xEC040000 - 0xEC000000'
 # save
 # dhcp
 # setenv bootargs console=ttyS0,$baudrate
 # tftpboot 0x1000000 192.168.1.101:openwrt-mpc85xx-p1020-aerohive_hiveap-330-initramfs-kernel.bin
 # bootm

3) Once openwrt booted:
carefully copy and paste this into the root shell. One step at a time

  # 3.0 install kmod-mtd-rw from the internet and load it

  opkg update; opkg install kmod-mtd-rw
  insmod mtd-rw i_want_a_brick=y

  # 3.1 create scripts that modifies uboot

cat <<- "EOF" > /tmp/uboot-update.sh
  . /lib/functions/system.sh
  cp "/dev/mtd$(find_mtd_index 'u-boot')" /tmp/uboot
  cp /tmp/uboot /tmp/uboot_patched
  ofs=$(strings -n80 -td < /tmp/uboot | grep '^ [0-9]* setenv bootargs.*cp\.l' | cut -f2 -d' ')
  for off in $ofs; do
    printf "run owrt_boot;            " | dd of=/tmp/uboot_patched bs=1 seek=${off} conv=notrunc
  done
  md5sum /tmp/uboot*
EOF

  # 3.2 run the script to do the modification

  sh /tmp/uboot-update.sh

  # verify that /tmp/uboot and /tmp/uboot_patched are good
  #
  # my uboot was: (is printed during boot)
  # U-Boot 2009.11 (Jan 12 2017 - 00:27:25), Build: jenkins-HiveOS-Honolulu_AP350_Rel-245
  #
  # d84b45a2e8aca60d630fbd422efc6b39  /tmp/uboot
  # 6dc420f24c2028b9cf7f0c62c0c7f692  /tmp/uboot_patched
  # 98ebc7e7480ce9148cd2799357a844b0  /tmp/uboot-update.sh <-- just for reference

  # 3.3 this produces the /tmp/u-boot_patched file.

  mtd write /tmp/uboot_patched u-boot

3) scp over the sysupgrade file to /tmp/ and run sysupgrade to flash OpenWrt:

  sysupgrade -n /tmp/openwrt-mpc85xx-p1020-aerohive_hiveap-330-squashfs-sysupgrade.bin

4) after the reboot, you are good to go.

Other notes:

- Note that after this sysupgrade, the AP will be unavailable for 7 minutes
  to reformat flash. The tri-color LED does not blink in any way to
  indicate this, though there is no risk in interrupting this process,
  other than the jffs2 reformat being reset.

- Add a uci-default to fix the compat version. This will prevent updates
  from previous versions without going through the installation process.

- Enable CONFIG_MTD_SPLIT_UIMAGE_FW and adjust partitioning to combine
  the kernel and rootfs into a single dts partition to maximize storage
  space, though in practice the kernel can grow no larger than 16MiB due
  to constraints of the older mpc85xx u-boot platform.

- Because of that limit, KERNEL_SIZE has been raised to 16m.

- A .tar.gz of the u-boot source for the AP330 (a.k.a. Goldengate) can
  be found here[2].

- The stock-jffs2 partition is also removed to make more space -- this
  is possible only now that it is no longer split away from the rootfs.

- the console-override is gone. The device will now get the console
  through the bootargs. This has the advantage that you can set a different
  baudrate in uboot and the linux kernel will stick with it!

- due to the repartitioning, the partition layout and names got a makeover.

- the initramfs+fdt method is now combined into a MultiImage initramfs.
  The separate fdt download is no longer needed.

- added uboot-envtools to the mpc85xx target. All targets have uboot and
  this way its available in the initramfs.

[1]: https://bugs.openwrt.org/index.php?do=details&task_id=4110
[2]: magnet:?xt=urn:btih:e53b27006979afb632af5935fa0f2affaa822a59

Tested-by: Martin Kennedy <hurricos@gmail.com>
Signed-off-by: Martin Kennedy <hurricos@gmail.com>
(rewrote parts of the commit message, Initramfs-MultiImage,
dropped bootargs-override, added wiki entry + link, uboot-envtools)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-19 19:20:29 +01:00
Rosen Penev
fbb8e1ef45 ksmbd: add out-of-tree module
ksmbd is an upstream linux alternative to Samba which is lighterweight
and more performant, especially on underpowered devices.

Moving it here from the packages feed as it is now an upstream kernel
module. Also easier to update as version updates can be coordinated better

The next LTS kernel (5.15) has this included. A depend on kernel < 5.15
will need to be added later.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-02-19 18:29:42 +01:00
Rosen Penev
666d427652 linux/modules: split up oid_registry
This will be needed by ksmbd in a following commit.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-02-19 18:29:42 +01:00
Eneas U de Queiroz
e6df13d0e1 hostapd: fallback to psk when generating r0kh/r1kh
The 80211r r0kh and r1kh defaults are generated from the md5sum of
"$mobility_domain/$auth_secret".  auth_secret is only set when using EAP
authentication, but the default key is used for SAE/PSK as well.  In
this case,  auth_secret is empty, and the default value of the key can
be computed from the SSID alone.

Fallback to using $key when auth_secret is empty.  While at it, rename
the variable holding the generated key from 'key' to 'ft_key', to avoid
clobbering the PSK.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
[make ft_key local]
Signed-off-by: David Bauer <mail@david-bauer.net>
2022-02-19 16:14:52 +01:00
David Bauer
6f78723977 hostapd: add STA extended capabilities to get_clients
Add the STAs extended capabilities to the ubus STA information. This
way, external daemons can be made aware of a STAs capabilities.

This field is of an array type and contains 0 or more bytes of a STAs
advertised extended capabilities.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-02-19 16:14:45 +01:00
Alexey Smirnov
66071729a2 base-files: add support for heartbeat led trigger
This patch adds support for creation heartbeat led trigger with,
for example, this command:

	ucidef_set_led_heartbeat "..." "..." "..."

from /etc/board.d/01_leds.

Signed-off-by: Alexey Smirnov <s.alexey@gmail.com>
2022-02-19 13:10:01 +01:00
Mauri Sandberg
2c211a901d gpio-nxp-74hc153: remove package
This module was used solely by Buffalo WZR-HP-G300NH devices
and has become obsolete with the introduction of gpio-cascade.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
2022-02-19 13:10:01 +01:00
Mauri Sandberg
2f50d65161 kernel: add package kmod-gpio-cascade
Adds kernel module for Generic GPIO cascade.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [missing commit description]
2022-02-19 13:10:01 +01:00
Mauri Sandberg
15f0074beb kernel: add package kmod-multiplexer
Adds new kernel module for GPIO controlled multiplexer support.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [missing commit description]
2022-02-19 13:10:01 +01:00
Daniel Golle
48ace62114
procd: update to git HEAD
a87d010 uxc: remove unused printf parameter
 ad65249 instance: exit in case asprintf() fails

Build with glibc should again work after this commit.

Fixes: e9e61d76fd ("procd: update to git HEAD")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-02-19 00:11:55 +00:00
Daniel Golle
e9e61d76fd
procd: update to git HEAD
df1123e uxc: add support for user-defined settings
 0272c7c uxc: allow editing settings using 'create'
 a839518 uxc: clean up error handling

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-02-18 03:03:34 +00:00
Daniel Golle
397de50089
base-files: Make sure rootfs_data_max is considered
For sysupgrade on NAND/UBI devices there is the U-Boot environment
variable rootfs_data_max which can be used to limit the size of the
rootfs_data volume created on sysupgrade.
This stopped working reliable with recent kernels, probably due to a
race condition when reading the number of free erase blocks from sysfs
just after removing a volume.
Change the script to just try creating rootfs_data with the desired
size and retry with maximum size in case that fails. Hence calculating
the available size in the script can be dropped which works around the
problem.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-02-17 15:15:42 +00:00
Stijn Tintel
add7884cd0 libnetfilter-conntrack: bump to 1.0.9
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2022-02-17 13:59:44 +02:00