Commit Graph

115 Commits

Author SHA1 Message Date
Jo-Philipp Wich
600a8517ad firewall: fix port range quirk in previous commit
SVN-Revision: 27335
2011-07-01 11:50:48 +00:00
Jo-Philipp Wich
df14a48dc9 firewall: properly handle negated ports in nat reflection
SVN-Revision: 27334
2011-07-01 11:48:14 +00:00
Jo-Philipp Wich
07abf4a81e firewall: refine default ICMPv6 rules to better conform with RFC4890, do not forward link local ICMP message types, allow parameter problem
SVN-Revision: 27321
2011-06-30 12:22:05 +00:00
Jo-Philipp Wich
8f0fb81dfe firewall: restore local port relocation ability from r26617
SVN-Revision: 27318
2011-06-30 01:36:09 +00:00
Jo-Philipp Wich
68a1c8e1e3 firewall: - allow multiple ports, protocols, macs, icmp types per rule - implement "limit" and "limit_burst" options for rules - implement "extra" option to rules and redirects for passing arbritary flags to iptables - implement negations for "src_port", "dest_port", "src_dport", "src_mac", "proto" and "icmp_type" options - allow wildcard (*) "src" and "dest" options in rules to allow specifying "any" source or destination - validate symbolic icmp-type names against the selected iptables binary - properly handle forwarded ICMPv6 traffic in the default configuration
SVN-Revision: 27317
2011-06-30 01:31:23 +00:00
Jo-Philipp Wich
9f37422f2f firewall: ensure that fw_get_subnet4() sets an empty value if no (valid) IPv4 addr was found
SVN-Revision: 27198
2011-06-16 22:18:45 +00:00
Jo-Philipp Wich
c014101d73 firewall: allow symbolic names of interfaces and aliases in masq_src and masq_dest
SVN-Revision: 27196
2011-06-16 21:54:59 +00:00
Jo-Philipp Wich
f2b7c81d46 firewall: explictely mention network in default configuration, makes it less confusing
SVN-Revision: 26961
2011-05-20 13:45:40 +00:00
Jo-Philipp Wich
2e9e4c435f firewall: revert accidential committed changes from r26805
SVN-Revision: 26806
2011-05-02 12:55:36 +00:00
Jo-Philipp Wich
ad23dd94b6 firewall: provide examples of ssh port relocation on firewall and IPsec passthrough Two examples of potentially useful configurations (commented out, of course):
(a) map the ssh service running on the firewall to 22001 externally, without modifying the configuration of the daemon itself. this allows port 22 on the WAN side to then be port-forwarded to a
LAN-based machine if desired, or if not, simply obscures the port from external attack.

(b) allow IPsec/ESP and ISAKMP (UDP-based key exchange) to happen by default. useful for most modern VPN clients you might have on your WAN.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26805
2011-05-02 12:54:31 +00:00
Jo-Philipp Wich
2a386cee99 firewall: prevent excessive uci state data aggregation (#9152)
SVN-Revision: 26740
2011-04-20 11:49:09 +00:00
Jo-Philipp Wich
a9977eca91 firewall: allow local redirection of ports
Allow a redirect like:

config redirect
        option src 'wan'
        option dest 'lan'
        option src_dport '22001'
        option dest_port '22'
        option proto 'tcp'

note the absence of the "dest_ip" field, meaning to terminate the connection on the firewall itself.

This patch makes three changes:

(1) moves the conntrack module into the conntrack package (but not any of the conntrack_* helpers).
(2) fixes a bug where the wrong table is used when the "dest_ip" field is absent.
(3) accepts incoming connections on the destination port on the input_ZONE table, but only for DNATted
    connections.

In the above example,

ssh -p 22 root@myrouter

would fail from the outside, but:

ssh -p 22001 root@myrouter

would succeed.  This is handy if:

(1) you want to avoid ssh probes on your router, or
(2) you want to redirect incoming connections on port 22 to some machine inside your firewall, but
    still want to allow firewall access from outside.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26617
2011-04-12 20:03:59 +00:00
Jo-Philipp Wich
af82471525 firewall: prevent duplicate values in interface state vars
SVN-Revision: 26382
2011-03-30 20:29:17 +00:00
Travis Kemen
a2cd7b2883 Keep firewall.user during sysupgrades
SVN-Revision: 26241
2011-03-20 00:57:47 +00:00
Jo-Philipp Wich
13333a6742 firewall: move include sourcing into a subshell, this makes the firewall init immune against exit in the include scripts
SVN-Revision: 25835
2011-03-02 19:20:29 +00:00
Jo-Philipp Wich
1ca64678bb firewall: fix rule generation for v4 or v6 only zones (#8955)
SVN-Revision: 25813
2011-03-01 18:04:14 +00:00
Jo-Philipp Wich
04b20727d8 firewall: fix wrong rule order if multiple protocols are used
SVN-Revision: 25179
2011-01-27 22:19:53 +00:00
Jo-Philipp Wich
a43f5b5038 firewall: insert SNAT and DNAT rules according to the order of the configuration file (#8052)
SVN-Revision: 23318
2010-10-08 12:11:55 +00:00
Jo-Philipp Wich
b0ca17ae6e firewall: mark /etc/firewall.user as conffile
SVN-Revision: 23231
2010-10-05 07:31:49 +00:00
Jo-Philipp Wich
7bf84dc4f8 firewall: also establish forward rules when setting up nat reflection, back out early if reflection is disabled
SVN-Revision: 23201
2010-10-03 18:11:59 +00:00
Jo-Philipp Wich
1cb2abca8e add maintainer information
SVN-Revision: 23159
2010-09-30 10:48:37 +00:00
Jo-Philipp Wich
1a0d7a3612 firewall: fix chain selection logic, option dest must be ignored for notrack targets
SVN-Revision: 23143
2010-09-28 11:38:31 +00:00
Jo-Philipp Wich
a1a31f1831 firewall: don't setup nat reflection if negations are used
SVN-Revision: 23142
2010-09-28 11:11:11 +00:00
Jo-Philipp Wich
6a335579b8 fireall: - support negations for src_ip, dest_ip, src_dip options in rules and redirects - add NOTRACK target to rule sections, allows to define fine grained notrack rules
SVN-Revision: 23141
2010-09-28 10:42:56 +00:00
Jo-Philipp Wich
b07620df31 firewall: protect iptables invocations with locks in interface ops, it might run concurrently due to hotplug invocations on network restart
SVN-Revision: 23090
2010-09-19 15:01:47 +00:00
Jo-Philipp Wich
f90328f26e firewall: make invalid redirects and duplicate zones non-fatal, print a notice and discard them
SVN-Revision: 23080
2010-09-16 11:47:35 +00:00
Jo-Philipp Wich
7557011cb1 firewall: run ifdown hotplug events synchronized, fixes a racecondition on "ifup iface" when ifdown and ifup events are delivered with a small dealy
SVN-Revision: 23064
2010-09-15 01:53:36 +00:00
Jo-Philipp Wich
1fe50da4bb firewall: deliver remove hotplug events for all active zones/networks when restarting the firewall
SVN-Revision: 23062
2010-09-14 23:11:12 +00:00
Jo-Philipp Wich
f3dd8278bb firewall: - simplify masquerade rule setup - remove various subshell invocations - speedup fw() by not relying on xargs and pipes - rework SNAT support - attach to dest zone, use src_dip/src_dport as snat source
SVN-Revision: 23024
2010-09-11 20:04:34 +00:00
Jo-Philipp Wich
5ab58aa39c firewall: - fix possible endless loop when the family option is used for forwardings - only generate forwarding rules in SNAT redirect sections if src_dip is specified
SVN-Revision: 22938
2010-09-05 20:17:23 +00:00
Jo-Philipp Wich
eb79296cc1 firewall: introduce SNAT support for redirect sections
SVN-Revision: 22937
2010-09-05 19:03:17 +00:00
Jo-Philipp Wich
f4ee14e1c3 firewall: add option to disable NAT reflection
SVN-Revision: 22908
2010-09-04 17:49:14 +00:00
Jo-Philipp Wich
baf4782be6 firewall: clean up description (#7875)
SVN-Revision: 22905
2010-09-04 17:39:00 +00:00
Jo-Philipp Wich
ca5bf9e291 firewall: - handle NAT reflection in firewall hotplug, solves synchronizing issues on boot - introduce masq_src and masq_dest options to limit zone masq to specific ip ranges, supports multiple subnets and negation
SVN-Revision: 22888
2010-09-04 15:49:13 +00:00
Jo-Philipp Wich
ee4dd61b10 firewall: - fix processing of rules with an ip family option - append interface rules at the end of internal zone chains, simplifies injecting user or addon rules - support simple file logging (option log + option log_limit per zone)
SVN-Revision: 22847
2010-08-31 01:54:08 +00:00
Jo-Philipp Wich
5b365822f3 firwall: fix nat reflection for zones covering multiple networks
SVN-Revision: 22442
2010-07-31 13:25:56 +00:00
Jo-Philipp Wich
d68e09200e firewall: add basic NAT reflection/NAT loopback support
SVN-Revision: 22441
2010-07-31 13:06:14 +00:00
Jo-Philipp Wich
e62a9791ee firewall: allow redirecting only destination port (#7197)
SVN-Revision: 22227
2010-07-16 06:03:15 +00:00
Jo-Philipp Wich
d6d1dd47d3 firewall: fix another notrack related bug
SVN-Revision: 22218
2010-07-15 23:24:01 +00:00
Jo-Philipp Wich
f8fa598bf4 firewall: - notrack support was broken in multiple ways, fix it - also consider a zone conntracked if any redirect references it (#7196)
SVN-Revision: 22215
2010-07-15 22:01:48 +00:00
Jo-Philipp Wich
48c357ec01 firewall: - support alias ifnames different from parent ifname - properly handle multiple subnets per alias (v4+v6)
SVN-Revision: 21656
2010-06-02 00:59:35 +00:00
Jo-Philipp Wich
07b571a239 firewall: Initial alias interface support. This allows to define zones covering alias interfaces and associated entries like rules and forwardings.
SVN-Revision: 21653
2010-06-01 21:58:48 +00:00
Jo-Philipp Wich
a756114e59 firewall: change the order of IPv4/IPv6 address detection, fixes mixed notation v6 improperly detected as v4 address
SVN-Revision: 21642
2010-05-31 01:34:47 +00:00
Jo-Philipp Wich
e25fbfccdf firewall: fix support for netranges in redirect and rule sections
SVN-Revision: 21640
2010-05-30 23:49:47 +00:00
Jo-Philipp Wich
409edb1b8e firewall: count rules per chain and family, fix wrong order of ip6tables rules when ipv4 only or dual family rules are defined
SVN-Revision: 21533
2010-05-22 02:01:19 +00:00
Jo-Philipp Wich
cc84e0672b firewall: don't apply default udp/68 rule to ip6tables
SVN-Revision: 21509
2010-05-19 21:37:12 +00:00
Jo-Philipp Wich
40ad9defcc firewall: - fix ip6tables rules when icmp_type option is set - add "family" option to zones, forwardings, redirects and rules to selectively apply rules to iptables and/or ip6tables
SVN-Revision: 21508
2010-05-19 21:35:23 +00:00
Jo-Philipp Wich
3875f85110 firewall: add commented disable_ipv6 option to default config
SVN-Revision: 21505
2010-05-19 09:49:21 +00:00
Jo-Philipp Wich
3ffd27f905 firewall: implement disable_ipv6 uci option
SVN-Revision: 21503
2010-05-19 01:55:46 +00:00
Jo-Philipp Wich
c6fdffd932 firewall (#7355) - partially revert r21486, start firewall on init again - skip iface hotplug events if base fw is not up yet - get ifname and up state with uci_get_state() in iface setup since the values gathered by scan_interfaces() may be outdated when iface coldplugging happens (observed with pptp) - ignore up state when bringing down interfaces because ifdown reverts state vars before dispatching the iface event - bump package revision
SVN-Revision: 21502
2010-05-19 00:50:14 +00:00