Commit Graph

10 Commits

Author SHA1 Message Date
Sieng Piaw Liew
330cbcc09c bmips: switch to napi_build_skb() to reuse skbuff_heads
napi_build_skb() reuses NAPI skbuff_head cache in order to save some
cycles on freeing/allocating skbuff_heads on every new rx or completed
tx.
Use napi_consume_skb() to feed the cache with skbuff_heads of completed
tx so it's never empty.

Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
2023-03-04 19:28:16 +01:00
Sieng Piaw Liew
a332b8cc9c bmips: check NAPI context when refilling rx SKB
Check if we're in NAPI context when refilling rx. Normally we're almost
always running in NAPI context. Dispatch to napi_alloc_frag() directly
instead of relying on netdev_alloc_frag() which does the same but with
the overhead of local_bh_disable/enable.

Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
[improve code format]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-03-04 19:28:16 +01:00
Sieng Piaw Liew
71ef4ec47c bmips: convert to build_skb()
We can increase the efficiency of rx path by using buffers to receive
packets then build SKBs around them just before passing into the network
stack. In contrast, preallocating SKBs too early reduces CPU cache
efficiency.
Performance is slightly increased but the changes allow more
potential optimizations.

Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
[improve code format]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-03-04 19:28:16 +01:00
Sieng Piaw Liew
7178adadcc bmips: use netdev_alloc_skb() for copybreak
bmips is using Broadcom B53 DSA driver which means the ethernet driver
must compensate for 6 bytes tags from the internal switch.
This means using NET_IP_ALIGN actually misaligns the skb, lowering
performance significantly. Therefore napi_alloc_skb() which uses
NET_IP_ALIGN is changed to netdev_alloc_skb().
Performance in iperf3 is increased from ~47Mbps to 52Mbps.

Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
2023-03-04 19:28:16 +01:00
Álvaro Fernández Rojas
66994d68cd bmips: remove linux 5.10 compatibility
A devent amount of patches have been upstreamed, so maintaining linux 5.10 on
this target makes no sense.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2022-05-20 12:39:34 +02:00
Álvaro Fernández Rojas
6a1e7c767f bmips: add linux v5.15 support
Build system: x86_64
Build-tested: generic, nand
Run-tested: generic/AR-5387un, nand/VR-3032u

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2022-05-20 12:21:03 +02:00
Ansuel Smith
91a52f22a1 treewide: backport support for nvmem on non platform devices
In the current state, nvmem cells are only detected on platform device.
To quickly fix the problem, we register the affected problematic driver
with the of_platform but that is more an hack than a real solution.
Backport from net-next the required patch so that nvmem can work also
with non-platform devices and rework our current patch.
Drop the mediatek and dsa workaround and rework the ath10k patches.
Rework every driver that use the of_get_mac_address api.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-08-05 01:46:26 +02:00
Álvaro Fernández Rojas
7f04d67517 bmips: add experimental PCI/PCIe support
These PCI drivers are a bit hacky and definitely not suitable for upstreaming,
but hopefully we can use them as a base for developing proper upstream PCI
drivers.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-23 20:12:22 +01:00
Álvaro Fernández Rojas
ecc058b6a0 bmips: minor ethernet driver cleanups and fixes
Add some minor ethernet driver cleanups and fixes to improve code quality.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-14 16:21:27 +01:00
Álvaro Fernández Rojas
28dcb74de3 bmips: add experimental ethernet support
This adds experimental ethernet support for BCM6318, BCM6328, BCM6362, BCM6368
and BCM63268.
BCM6358 needs a different driver, so there's no support for now.

Working devices:
- Comtrend AR-5315u
- Comtrend AR-5387un
- Comtrend VR-3025u
- Comtrend VR-3032u

Not working devices:
- Netgear DGND3700 v2 (no idea on how the external switch is connected)
- Huawei HG556a ver B (BCM6358 needs a separate driveer)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-14 12:05:17 +01:00