Commit Graph

109 Commits

Author SHA1 Message Date
Petr Štetiar
5ecc0cfd6f kernel: bump 5.4 to 5.4.28
Changelog since 5.4.24 mentions CVE-2019-19769, CVE-2020-8648,
CVE-2020-8649 and CVE-2020-8647.

Removed upstreamed:

 generic: 507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch
 generic: 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch
 bcm27xx: 950-0435-ASoC-pcm512x-Fix-unbalanced-regulator-enable-call-in.patch
 ipq806x: 701-stmmac-fix-notifier-registration.patch
 lantiq: 002-pinctrl-falcon-fix-syntax-error.patch
 octeontx: 0002-net-thunderx-workaround-BGX-TX-Underflow-issue.patch

Run tested: apu2, qemu-x86-64, apalis, a64-olinuxino, nbg6617
Build tested: sunxi/a53, imx6, x86/64, ipq40xx

Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Christian Lamparter
d107aaa910 kernel: backport and package drivetemp hwmon from v5.5
This patch backports the hwmon drivetemp sensor module from vanilla
linux 5.5 to be available on OpenWrt's 5.4 kernel.

Extract from The upstream commit by Guenter Roeck <linux@roeck-us.net>:
hwmon: Driver for disk and solid state drives with temperature sensors

"Reading the temperature of ATA drives has been supported for years
by userspace tools such as smarttools or hddtemp. The downside of
such tools is that they need to run with super-user privilege, that
the temperatures are not reported by standard tools such as 'sensors'
or 'libsensors', and that drive temperatures are not available for use
in the kernel's thermal subsystem.

This driver solves this problem by adding support for reading the
temperature of ATA drives from the kernel using the hwmon API and
by adding a temperature zone for each drive.

With this driver, the hard disk temperature can be read [...]
using sysfs:

$ grep . /sys/class/hwmon/hwmon9/{name,temp1_input}
/sys/class/hwmon/hwmon9/name:drivetemp
/sys/class/hwmon/hwmon9/temp1_input:23000

If the drive supports SCT transport and reports temperature limits,
those are reported as well.

drivetemp-scsi-0-0
Adapter: SCSI adapter
temp1:        +27.0<C2><B0>C (low  =  +0.0<C2><B0>C, high = +60.0<C2><B0>C)
                             (crit low = -41.0<C2><B0>C, crit = +85.0<C2><B0>C)
                             (lowest = +23.0<C2><B0>C, highest = +34.0<C2><B0>C)

The driver attempts to use SCT Command Transport to read the drive
temperature. If the SCT Command Transport feature set is not available,
or if it does not report the drive temperature, drive temperatures may
be readable through SMART attributes. Since SMART attributes are not well
defined, this method is only used as fallback mechanism."

This patch incorperates a patch made by Linus Walleij:
820-libata-Assign-OF-node-to-the-SCSI-device.patch
This patch is necessary in order to wire-up the drivetemp
sensor into the device tree's thermal-zones.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-03-21 17:48:34 +01:00
Robert Marko
d7f21940bc generic: 5.4: Add 4B_OPCODES flag to w25q256
This patch backports the upstream patch that adds the 4B_OPCODES flag to w25q256 under 5.4 kernel.
This is needed for ipq40xx and ramips.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2020-03-12 12:59:44 +01:00
Koen Vandeputte
f9f62d43e4 kernel: bump 5.4 to 5.4.24
Refreshed all patches.

Compile-tested on: imx6
Runtime-tested on: imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-03-09 20:43:53 +01:00
Rafał Miłecki
5cc0493c2b kernel: backport mtd partition address fix sent upstream
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2020-03-09 11:49:42 +01:00
Koen Vandeputte
4e0c54bc5b kernel: add support for kernel 5.4
The following patches were removed because they are integrated in the upstream kernel 5.4:
 * backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch
 * backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch
 * backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch
 * backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch
 * backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
 * backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch
 * backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch
 * backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch
 * backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch
 * backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch
 * backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch
 * backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch
 * backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch
 * backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch
 * backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch
 * backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch
 * backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch
 * backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch
 * backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch
 * backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch
 * backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch
 * backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch
 * backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch
 * backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch
 * backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch
 * backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch
 * backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch
 * backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch
 * backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch
 * backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch
 * backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch
 * backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch
 * backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch
 * backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch
 * backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch
 * backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch
 * backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch
 * pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch
 * pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
 * pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch
 * pending-5.4/220-optimize_inlining.patch
 * pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
 * pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch
 * pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch
 * pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch

Some bigger changes were done to this feature and we did not port this patch yet:
 * hack-5.4/207-disable-modorder.patch

This depends on BOOTMEM which was removed from the kernel, this needs some bigger changes:
 * hack-5.4/930-crashlog.patch

A different version of the FPU disable patch was merged upstream, OpenWrt needs some adaptations.
 * pending-5.4/304-mips_disable_fpu.patch

- no crashlog support yet as a required file got deleted upstream
- Removed patch below, which is now seen as a recursive dependency [1]
- Removed patch below due to build error [2]
- fix still required to avoid identical function def [3]
- Fixes included from Blocktrron
- Fixes included from Chunkeey
- Fix included from nbd regarding "dst leak in Flow Offload"

[1] target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch
[2] target/linux/generic/hack-5.4/207-disable-modorder.patch
[3] target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:45 +01:00
Hauke Mehrtens
c16517d26d kernel: copy kernel 4.19 code to 5.4
No changes were done to the patches while coping them. Currently they do
not apply on top of kernel 5.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:45 +01:00
Aleksander Jan Bajkowski
c6e33b7cb4 generic: refresh patches
just run: make target/linux/refresh V=s

Fixes: 6e315de0f4

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2020-02-22 16:38:41 +01:00
Koen Vandeputte
6e315de0f4 kernel: add support for GD25D05 SPI NOR
This chip is used on newer RB912UAG-5HPnD r2 boards:

Before:

[    0.642553] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 10
[    0.649381] NAND flash driver for the RouterBOARD 91x series

After:

[    0.641714] m25p80 spi0.0: found gd25d05, expected m25p80
[    0.649916] m25p80 spi0.0: gd25d05 (64 Kbytes)
[    0.655122] Creating 4 MTD partitions on "spi0.0":
[    0.660164] 0x000000000000-0x00000000c000 : "routerboot"
[    0.667782] 0x00000000c000-0x00000000d000 : "hard_config"
[    0.675073] 0x00000000d000-0x00000000e000 : "bios"
[    0.682613] 0x00000000e000-0x00000000f000 : "soft_config"
[    0.690304] NAND flash driver for the RouterBOARD 91x series

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-02-04 18:10:13 +01:00