Commit Graph

5 Commits

Author SHA1 Message Date
Rui Salvaterra
505b7a2d08 kernel: move two symbols to the generic kconfigs
CONFIG_RCU_{NEED_SEGCBLIST,STALL_COMMON} are set basically everywhere. Move them
to the generic kconfigs. And resort the generic kconfigs while at it.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-29 17:07:19 +02:00
Pawel Dembicki
76649fd06d mpc85xx: p2020: fix cfi-nor detection
At this moment p2020rdb has broken images, because NOR memory connected
to eLBC bus isn't detected.

In 642b1e8dbed7 linux tree commit, config dependencies of MTD_PHYSMAP_OF
was changed and now MTD_PHYSMAP is required.

This patch adds MTD_PHYSMAP option to kernel config in p2020 subtarget
and fix booting of p2020rdb.

Fixes: 13b1db795f ("mpc85xx: add support for kernel 5.4")

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2021-03-01 00:34:23 +01:00
David Bauer
fc161063f5 mpc85xx: move NAND symbol to target config
All mpc85xx subtargets utilize NAND, thus enable NAND support
target-wide.

Fixes: 1287bb48dc ("mpc85xx: fix build with kernel 5.4")

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-02-29 00:13:30 +01:00
David Bauer
1287bb48dc mpc85xx: fix build with kernel 5.4
This fixes some outstanding issues with the Kernel 5.4 build:

 * Adds missing support patch for the Enterasys WS-AP3710i
 * Fixes incorrect NAND symbols
 * Adds patch for broken image wrapping

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-02-28 23:32:37 +01:00
Pawel Dembicki
5de6aed42c mpc85xx: add support for Freescale (NXP) P2020RDB
This commit add initial support for Freescale (NXP) P2020RDB

Hardware:
SoC: P2020 2x1GHz
DRAM: 512-1GB DDR3
2 + 4 GBE (2 separate ports and four in VSC7385)
Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR
PCIE x1 and mPCIE x1
SD Reader

Interfaces:
GBE RJ45 x6
USB2.0 x1
UART x2
I2C x2
JTAG x1
SD x1
PCIE x2 (PCIE and mPCIE)

Flash instructions:
Place sysupgrade image to 0x80000 address in NOR.
Eg. (no brakelines in setenv command):

setenv 'firmware_flash tftpboot $loadaddr $firmwarefile;
 protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize;
 cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize;
 cmp.b $loadaddr $norfdtaddr $filesize'
setenv firmwarefile firmware.bin
run firmware_flash

Boot (no brakeline in setenv command):
setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev,
$baudrate rootfstype=squashfs $othbootargs;
bootm $norfdtaddr'
saveenv
boot

Known issues:
-Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI)
-No SD reader support

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2019-01-13 11:31:43 +01:00