Commit Graph

706 Commits

Author SHA1 Message Date
Stijn Tintel
ec1d7b9461 kernel: bump 4.14 to 4.14.34
Refresh patches.
Update patches that no longer apply:
- backport/313-netfilter-remove-defensive-check-on-malformed-packet.patch
- pending/642-net-8021q-support-hardware-flow-table-offload.patch

Compile-tested: x86/64.
Runtime-tested: x86/64.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-04-16 00:22:57 +03:00
Rafał Miłecki
f5195e72c0 kernel: mtd: bcm47xxpart: improve handling TRX partition size
This is important fix for flash parsing in some corner cases. In case
of TRX subpartition with rootfs being aligned to the flash block size it
was incorrectly registered twice. Detecting & registering it as a
standalone partition was resulting in an incorrect "firmware" partition
size and possibly broken sysupgrade.

It wasn't noticed before because "rootfs" alignment depends on a kernel
size. It can happen though - depending on the configuration and the
kernel size.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-04-12 08:25:17 +02:00
Rafał Miłecki
d9da0387f4 bcm53xx: switch to kernel 4.14
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-03-29 15:31:29 +02:00
Rafał Miłecki
2c140c4a3e bcm53xx: update kernel 4.14 config
There are few symbol changes but only 3 symbols were possible to set:
THERMAL_EMERGENCY_POWEROFF_DELAY_MS
CLK_BCM_SR
PHY_NS2_USB_DRD

Both new drivers don't seem to apply to Northstar so they are disabled.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-03-29 15:30:50 +02:00
Rafał Miłecki
707d119716 bcm53xx: fix earlycon regression in kernel 4.14
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-03-29 15:10:19 +02:00
Stijn Segers
41a881a8d9 Kernel: bump 4.14 to 4.14.29
Right patch version this time, sorry!

* Patch 180-usb-xhci-add-support-for-performing-fake-doorbell.patch had to be adjusted slightly because of upstream adapted code.
* Refreshed patches.

Compile-tested: ramips/mt7621, x86/64
Run-tested: ramips/mt7621, x86/64
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Rosen Penev <rosenp@gmail.com>
2018-03-23 23:49:55 +01:00
Rafał Miłecki
6c194078db bcm53xx: include patch adding WZR-900DHP LEDs support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-03-07 17:01:07 +01:00
Stijn Segers
e72b2464b1 kernel: bump 4.4 to 4.4.119
This bumps the 4.4. kernel in master to 4.4.119.
Includes more Meltdown & Spectre mitigation.

* Refresh patches.
* Refresh x86/config for RETPOLINE.
* Deleted 8049-PCI-layerscape-Add-fsl-ls2085a-pcie-compatible-ID.patch (accepted upstream)
* Deleted 8050-PCI-layerscape-Fix-MSG-TLP-drop-setting.patch (accepted upstream)
* Deleted 650-pppoe_header_pad.patch (does not apply anymore (code was replaced)).

Bumps from 4.4.112 to 4.4.115 were handled by Kevin Darbyshire-Bryant.

Compile-tested on: ar71xx & oxnas.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Rosen Penev <rosenp@gmail.com>
2018-03-03 12:58:56 +01:00
Stijn Segers
b5469b38cd kernel: bump 4.14 to 4.14.23
This patch bumps the 4.14 kernel to .23.
- Refreshed patches.
- Deleted bcm53xx/patches-4.14/089-PCI-iproc-Fix-NULL-pointer-dereference-for-BCMA.patch. Has been accepted upstream.
- Deleted generic/pending-4.14/821-usb-Remove-annoying-warning-about-bogus-URB.patch. The upstream URB code was changed,
  the patch no longer applies. I discussed this with the patch author and removed it for now, we'll see how it goes.

Compile-tested on: ramips/mt7621, x86/64
Run-tested on: ramips/mt7621, x86/64

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
2018-03-02 21:33:08 +01:00
Rafał Miłecki
86e5a6d985 bcm53xx: fix fallback code for picking status LED
Looking for a wrong LED file name was stopping this code from find any
LED. This affects devices with only a red/amber power LED.

Fixes: 3aaee1ba02 ("bcm53xx: failsafe support")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-02-27 16:52:25 +01:00
Rafał Miłecki
3618dcbff8 bcm53xx: rename SPI driver fix to use 0xx prefix as it was accepted
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-01-12 23:29:48 +01:00
Rafał Miłecki
8cd3370cce bcm53xx: use upstream fix for PCI iproc driver regression
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-01-12 23:27:43 +01:00
Rafał Miłecki
05cb6aa69f bcm53xx: replace linux,part-probe with a proper partitions subnode
This solution is more upstream compatible as it only requires specifying
of_match_table in the parser code and doesn't depend on linux,part-probe
which is solution made generic by a LEDE downstream patch that can't be
upstreamed.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-01-11 14:05:10 +01:00
Rafał Miłecki
3267ce750e bcm53xx: use iflag=skip_bytes for dd command during sysupgrade
Since BusyBox 1.25.0 dd command supports iflag=skip_bytes which allows
skipping requested amount of bytes without reducing blocksize. Thanks to
this we can leave default blocksize and let dd work more efficiently.

On Netgear R6250 "dd skip=58 iflag=skip_bytes" can be 5 times faster
than "dd bs=58 skip=1" when extracting TRX out of CHK.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-12-29 23:18:45 +01:00
Rafał Miłecki
fea884ff51 bcm53xx: add early support for kernel 4.14
Don't switch to it by default yet as it requires more testing.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-12-29 23:15:32 +01:00
Rafał Miłecki
6e922a0756 bcm53xx: make USB packages compatible with kernels 4.13+
In kernels 4.13+ modules are located in an extra "broadcom" subdir.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-12-29 17:25:51 +01:00
Rafał Miłecki
9c312ef628 bcm53xx: add upstream patch fixing SPI controller driver
That patch fixes handling SPI messages with two writing transfers. It's
important when using e.g. by m25p80 driver which uses one transfer for
opcode and another one for data.

Thanks to that fix we can now drop m25p80 workaround patch. It means one
less hack and also a better flash writing performance as there is no
more data buf copying.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-12-29 15:31:22 +01:00
Kevin Darbyshire-Bryant
7b6e01d389 kernel: bump 4.9 to 4.9.72
Refresh patches.

Runtime tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-12-26 23:31:00 +01:00
Kevin Darbyshire-Bryant
b0d99b77e5 kernel: bump 4.4 to 4.4.107
Refresh patches.

Update patch that no longer applied:
oxnas/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tested-by: Rosen Penev <rosenp@gmail.com>
2017-12-23 15:36:01 +01:00
Rafał Miłecki
370ce1fb48 bcm53xx: use otrx for creating TRX images
The advantage is that we don't have to specify max TRX size anymore and
otrx doesn't allocate a buffer of that size. It saves us allocating
32 MiB for every image we generate.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-11-17 11:43:33 +01:00
Florian Fainelli
5df1f4113b bcm53xx: Fix Generic profile description
Fix the sentence describing the bcm53xx generic profile.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-24 18:39:17 -07:00
Florian Fainelli
7f0a32e21c bcm53xx: Fix SmartRG SR400AC initramfs image
The SmartRG SR400AC CFE does not accept a TRX image, just a normal
binary image.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-23 18:39:29 -07:00
Kevin Darbyshire-Bryant
886d66abcd kernel: bump 4.9 to 4.9.57
Refresh patches.
Compile-tested for ar71xx - Archer C7 v2
Runtime-tested on  ar71xx - Archer C7 v2

Fixes the following CVEs:

- CVE-2017-7518
- CVE-2017-0786
- CVE-2017-1000255
- CVE-2017-12188
- CVE-2017-15265

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-10-18 19:44:09 +03:00
Rafał Miłecki
f98f83eada bcm53xx: backport DTS changes up to the first 4.15 queued commits
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-10-10 10:22:24 +02:00
Stijn Tintel
f12c42940d kernel: bump 4.9 to 4.9.54
Refresh patches.
Remove upstreamed patches:
- ramips/0067-enable-mt7621-xhci.patch
- ramips/0085-pinmux-util.patch
- ramips/301-fix-rt3883.patch

Compile-tested on brcm2708/bcm2708, octeon, ramips/mt7621, x86/64.
Runtime-tested on brcm2708/bcm2708, octeon, ramips/mt7621, x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 20:51:03 +03:00
Kevin Darbyshire-Bryant
9c82861cb8 kernel: update 4.4 to 4.4.86
Refresh patches

Compile & run tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-09-05 08:43:39 +02:00
Stijn Tintel
046618f5da kernel: update 4.9 to 4.9.47
Refresh patches.
Compile-tested on ramips/mt7621 and x86/64.
Runtime-tested on ramips/mt7621 and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-03 22:06:28 +03:00
Rafał Miłecki
d9564d79b8 bcm53xx: backport DTS commits that setup USB LEDs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-08-17 10:29:31 +02:00
Hauke Mehrtens
39e8ab17d5 kernel: update kernel 4.4 to version 4.4.79
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-28 22:46:26 +02:00
Hauke Mehrtens
88f3c63572 kernel: update kernel 4.9 to version 4.9.40
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-28 22:46:17 +02:00
Mathias Kresin
e4e984f2a0 treewide: use only board_name function to get name
Do not parse /tmp/sysinfo/board_name, /proc/cpuinfo or the device tree
compatible string directly. Always use the board_name function to get
the board name.

The admswconfig package still reads /proc/cpuinfo directly. The code
looks somehow broken and the whole adm5120 which uses this package
looks unmaintained. Leave it as it is for now.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
f12a32630f treewide: use the generic board_name function
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Koen Vandeputte
cd54b2d42b kernel: update kernel 4.9 to 4.9.37
- Refreshed all patches
- Removed upstreamed
- Adapted 4 patches:

473-fix-marvell-phy-initialization-issues.patch
-----------------------------------------------
Removed hunk 5 which got upstreamed

403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch
404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch
--------------------------------------------------------------
Adapted these 2 RFC patches, merging the delta's from an upstream commit
(see below) which made it before these 2.

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-
stable.git/commit/?h=v4.9.36&id=97ace183074d306942b903a148aebd5d061758f0

180-usb-xhci-add-support-for-performing-fake-doorbell.patch
-----------------------------------------------------------
- Moved fake_doorbell bitmask due to new item

Compile tested on: cns3xxx, imx6
Run tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-07-15 00:13:05 +02:00
Matthias Schiffer
438dcbfe74
base-files: automatically handle paths and symlinks for RAMFS_COPY_BIN
Depending on busybox applet selection, paths of basic utiilties may differ,
and may not work as symlinks to busybox. Simply using whatever binary is
found in PATH and detecting symlinks automatically is more robust and
easier to maintain.

The list of binaries is also slightly cleaned up and duplicates are
removed.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-07-11 17:26:32 +02:00
Matthias Schiffer
73f675415c
bcm53xx: upgrade: fix RAMFS_COPY_*
Fixes: 30f61a34b4 "base-files: always use staged sysupgrade"
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-07-11 17:19:23 +02:00
Stijn Tintel
880f73c327 kernel: cleanup CONFIG_SCHED_HRTICK
Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the
generic config in b47fd76563.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-29 04:46:59 +02:00
Stijn Tintel
f80963d4d1 kernel: update kernel 4.4 to 4.4.74
Refresh patches.
Compile-tested on ar71xx.
Runtime-tested on ar71xx.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-27 07:42:50 +02:00
Koen Vandeputte
69649a1b45 kernel: update kernel 4.9 to 4.9.34
- Refreshed all patches
- Adapted 1 (0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch)

Compile tested on: brcm2708, cns3xxx, imx6
Run tested on: brcm2708, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[Compile and run tested on brcm2708]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-27 07:21:03 +02:00
Rafał Miłecki
f5f1d40b5e kernel: backport MTD patch extracing TRX code to separated parser
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-06-23 11:54:20 +02:00
Rafał Miłecki
c00fbaf670 bcm53xx: include wpad-mini only on devices with (supported) wireless
Don't include wpad-mini when it's useless just like we don't include
useless wireless drivers.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-06-08 22:25:00 +02:00
Sergey Ryazanov
68e7a2a0b7 kernel: disable CONFIG_SG_POOL by default
CONFIG_SG_POOL symbol is selected only by CONFIG_SCSI, since the last
one is disabled by default then disable CONFIG_SG_POOL by default too.
And explicitly enable it only for platforms that use CONFIG_SCSI.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2017-06-07 18:31:10 +02:00
Koen Vandeputte
e842e16f45 kernel: update kernel 4.9 to 4.9.29
- Refresh all patches
- Removed upstreamed
- Adapted 1

Compile tested on: bcm53xx, cns3xxx, imx6, lantiq
Run tested on: cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[update from 4.9.28 to 4.9.29]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-21 21:51:22 +02:00
Rafał Miłecki
0a05fbd135 bcm53xx: add support for TP-LINK Archer C5 V2
This model also contains few partitions non-discoverable partitions we
need to "protect". Othen than that it uses non-deprecated serial entry
in DTS that doesn't work with LEDE so we need to workaround it as well.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-05-21 18:31:38 +02:00
Rafał Miłecki
8adeb4e5d0 bcm53xx: backport MDIO bus clock initialization fix
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-05-11 16:04:23 +02:00
Rafał Miłecki
51abaf722c bcm53xx: backport USB 3.0 PHY patch cleaning all writes
It doesn't change any bevahior just cleanes up the code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-05-11 16:04:23 +02:00
Rafał Miłecki
23d7c4d632 bcm53xx: enable Northstar thermal driver
It allows monitoring CPU temp and will shutdown system on critical
value.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-04-20 22:45:05 +02:00
Rafał Miłecki
b0fcb9b85c bcm53xx: backport DT patches for serial, thermal and MDIO
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-04-20 22:45:05 +02:00
Rafał Miłecki
2ebfdabfbd bcm53xx: put kernel into TRX when building initramfs images
Many (most?) devices can't boot raw kernel using tftp and probably none
allows flashing it. It's way more usable to have TRX with kernel
containing initrams as such an image can be actually flashed.

An exception are Buffalo devices which have recovery mode with support
for booting kernels over TFTP. For them keep building default images.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-27 10:41:36 +02:00
Rafał Miłecki
8fae77fc9b kernel: update bcma including recent changes for 4.12
This adds support for describing GPIO chips placed on PCIe cards. Thanks
to this we get working 2.4 GHz LED on Tenda AC9.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-21 09:58:05 +01:00
Rafał Miłecki
0694d08c84 bcm53xx: switch to kernel 4.9
With iproc regression fixed and GIC interrupts in DTS updated it seems
we can safely start using 4.9.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-18 23:00:56 +01:00
Rafał Miłecki
3a2e735b96 bcm53xx: backport BCM5301X patches
This fixes GIC interrupts (required before switching to 4.9), adds few
new entires & introduces DTS for Archer C5.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-18 18:32:53 +01:00
Rafał Miłecki
cd0f9900a4 bcm53xx: parepare for building more Linksys images
We still can't enable them by default without proper TRX support.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-12 16:24:13 +01:00
Rafał Miłecki
cc3c50eb22 bcm53xx: prepare for building Archer C5 V2 image
Don't enable it yet as kernel needs to be updated first.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-11 12:33:53 +01:00
Rafał Miłecki
e58ea0a80d bcm53xx: use upstream fix for iproc regression
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-10 22:26:20 +01:00
Rafał Miłecki
edda26dc4f bcm53xx: fix memory corruption caused by iproc PCE controller driver
This is a simple revert of upstream patch for now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-09 11:06:55 +01:00
Rafał Miłecki
9209511d61 bcm53xx: backport Broadcom's iProc QSPI driver
This driver has been added instead of improving spi-bcm53xx. It has some
advantages: allows SPI speed control & hopefully doesn't have bug that
was stopping us from using multiple SPI messages for writing flash data.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-01 07:02:17 +01:00
Rafał Miłecki
2677b66f9b bcm53xx: backport accepted BCM5301X and BCM53573 patches
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-28 22:52:46 +01:00
Rafał Miłecki
a732f69f85 bcm53xx: enable CLK_BCM_NSP for kernel 4.9
This is required to get booting kernel.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-28 16:43:51 +01:00
Rafał Miłecki
75b530a51b bcm53xx: add kernel 4.9 config
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-20 14:12:30 +01:00
Hauke Mehrtens
236840eb47 kernel: update kernel 4.9 to version 4.9.10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-16 00:46:23 +01:00
Rafał Miłecki
2fd81681f9 bcm53xx: include Broadcom PHY driver in the kernel
Initial idea was to use package with this PHY driver for devices that
need it. Unfortunately this can't work as bgmac is built-in and PHY
probing happens before loading modules - it results in PHY subsystem
picking default (generic) PHY driver.

There were two ways of solving this:
1) Making bcm53xx use bgmac as module
xor
2) Built-in Broadcom PHY driver

After some quick discussion it seems we can simply built-in the driver
as increased kenel size is relatively small (1805 B).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-07 18:11:17 +01:00
Rafał Miłecki
ec10bb18f5 bcm53xx: add missing system.sh include
It's needed for macaddr_add.

Fixes: 50efd403e6 ("bcm53xx: set WAN MAC address to don't share one with LAN interface")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-07 11:47:02 +01:00
Rafał Miłecki
6b01f0f196 bcm53xx: set Netgear R8000 USB LEDs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 20:24:19 +01:00
Rafał Miłecki
fb18c3c8ff bcm53xx: refresh Linux 4.4 config
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 17:21:09 +01:00
Rafał Miłecki
f24cb34239 bcm53xx: image: use one style of adding TARGET_DEVICES entries
It just makes code consistent. This trivial change may be a 17.01
candidate to provide simpler backporting experience.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 13:59:30 +01:00
Rafał Miłecki
26bc05eda9 bcm53xx: move bcm47xx_sprom driver to 4.4 specific directory
In kernel 4.9 it's already present so we don't want to overwite it (with
older & API incompatible version).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 10:18:20 +01:00
Rafał Miłecki
2252627b0e bcm53xx: add Linux 4.9 patches
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 10:08:39 +01:00
Rafał Miłecki
75d48d80c7 bcm53xx: backport upstream DTS files for Linksys devices
We dont't build officialy images for them yet due to partitioning
issues.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 08:49:23 +01:00
Rafał Miłecki
50efd403e6 bcm53xx: set WAN MAC address to don't share one with LAN interface
After analyzing numerous NVRAMs and vendor firmwares it seems the base
MAC address is used for LAN interface. WAN interface has different one
which sometimes is set directly in NVRAM and sometines needs to be
calculated.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-03 07:50:59 +01:00
Rafał Miłecki
58221d79d9 bcm53xx: fix LAN MAC address for devices that use eth2 originally
We override default Ethernet interface with eth0 which often uses random
MAC due to missing proper NVRAM entry. Fix this by manually assigning
MAC in the config.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-01 15:26:40 +01:00
Rafał Miłecki
12288d450b kernel: update bcma to fix devm memory leaks
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-31 14:31:13 +01:00
FUKAUMI Naoki
3b5d29b96e bcm53xx: build factory images for WZR-900DHP series
only factory images for DHP-EU and DHP2-JP (fw ver. 2.x) are built.

this will not work for DHP-JP/AP/TW (fw ver. 1.x) because they use
different buffalo_csum() formula.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-31 11:10:53 +01:00
Felix Fietkau
727e244fae bcm53xx: suppress osafeloader info error messages during flashing
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-30 13:00:11 +01:00
Rafał Miłecki
55ff15cfd5 bcm53xx: disable building Linksys EA6300 V1 image
This device has 2 TRX partitions (main one and failsafe one) and Linux
may not detect them properly failing to run userspace.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-25 10:50:27 +01:00
Rafał Miłecki
b86a34efea bcm53xx: use accepted BCM5301X patches for R8000 and Luxul devices
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-18 07:49:52 +01:00
Rafał Miłecki
ea6d10d572 bcm53xx: add pending BCM5301X patches: Netgear R8000 WiFi & Luxul DTS
This specifies wireless limitations for Netgear R8000 making sure people
won't use channels incorrectly (limited performance). There are also 2
new DTS files not used by us yet.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-15 23:10:55 +01:00
Hauke Mehrtens
5b089e45a6 kernel: update 4.4 kernel to 4.4.42
Refresh patches on all 4.4 supported platforms.
Compile & run tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-13 23:05:36 +01:00
Rafał Miłecki
4ce3c41696 bcm53xx: backport upstream bcm53xx spi driver changes
One replaces our local patch and another is just for keeping driver in
sync (license change).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-11 15:33:47 +01:00
Rafał Miłecki
7c8a36340c kernel: update bcm47xxpart failsafe partition patches
V2 using helper function was sent for upstream kernel

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-11 09:54:47 +01:00
Rafał Miłecki
1a5cb4ac1b kernel: add pending bcm47xxpart support for failsafe TRX partition
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-10 15:37:22 +01:00
Felix Fietkau
018d80007e kernel: remove ubifs xz decompression support
It has been unused, and less useful than squashfs for cases where flash
space usage matters.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 14:07:06 +01:00
Victor Shyba
d6c831e0e5 generic: mtd: backport SPI_NOR_HAS_LOCK
This flag was added to 4.9 with upstream commit
76a4707de5e18dc32d9cb4e990686140c5664a15.

Signed-off-by: Victor Shyba <victor1984@riseup.net>
[refresh and adjust platform patches, fix commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-03 19:58:00 +01:00
Rafał Miłecki
c5ca3043d1 bcm53xx: drop unused source file of bcm53xxspiflash
We don't use this driver since commit 741715331a ("bcm53xx: switch to
m25p80 and drop bcm53xxspiflash").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-29 18:07:01 +01:00
Rafał Miłecki
2ca4c74279 bcm53xx: backport missed BCM53573 ILP patch from 4.10
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-13 09:26:27 +01:00
Rafał Miłecki
1feb166ee7 bcm53xx: backport DTS patches accepted for 4.11
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-13 07:52:57 +01:00
Rafał Miłecki
52c7375c13 bcm53xx: disable CONFIG_FW_LOADER_USER_HELPER_FALLBACK
There are many targets using user space scripts to generate firmware but
bcm53xx doesn't need this, so let's disable that kernel option.

This lets us avoid some scary-looking kernel warnings like:
brcmfmac 0001:04:00.0: Falling back to user helper
firmware brcm!brcmfmac43602-pcie.txt: firmware_loading_store: map pages failed

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-12 09:57:40 +01:00
Rafał Miłecki
ee55a19a61 bcm53xx: update patch adding fake USB doorbell
Rob suggested I should use of_machine_is_compatible insteak of a new
property and updated patch has been sent.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-07 09:22:39 +01:00
Kevin Darbyshire-Bryant
102cb4742c kernel: bump to 4.4.35
Refresh patches on all 4.4 supported platforms.

077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch
removed as now upstream.

Compile & run tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-11-29 21:12:08 +01:00
Rafał Miłecki
32875a2d79 bcm53xx: use upstream accepted fix for ARM core aborts
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-28 13:14:14 +01:00
Rafał Miłecki
5e339a48aa bcm53xx: build image for TP-LINK Archer C9 v1
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:58:26 +01:00
Rafał Miłecki
2d61c26f02 bcm53xx: support SafeLoader format in sysupgrade
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:58:26 +01:00
Rafał Miłecki
eab2b17d43 bcm53xx: add kernel support for TP-LINK Archer C9 V1
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:58:25 +01:00
Felix Fietkau
1a1c3c690f bcm53xx: add switch config for Buffalo WXR-1900DHP and WZR-1750DHP
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-14 20:03:21 +01:00
Stijn Segers
2f2ea7b44c kernel: update kernel 4.4 to version 4.4.30
This patch bumps the 4.4 kernel from .28 to .30 and refreshes the patches.
Compile-tested on ar71xx, x86/64, ramips/mt7621, brcm47xx and kirkwood.

Run-tested on ar71xx & ramips/mt7621, brcm47xx and kirkwood (last two confirmed
by P. Wassi).

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2016-11-02 10:25:44 +01:00
Rafał Miłecki
3b26a5bb15 bcm53xx: include b43 in Tenda AC9 image
There is some (poor?) support for BCM43217 in b43.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-20 08:46:26 +02:00
Rafał Miłecki
ea7462ae07 bcm53xx: include usbport trigger for devices with USB
We don't have any code for enabling it automatically yet but it allows
adding entries manually to the /etc/config/system.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 12:28:52 +02:00
Rafał Miłecki
ba1024b9c9 bcm53xx: use the latest XHCI doorbell patch sent for upstream
The main difference is it supports DT binding. This allows us to use DT
for specifying controller and the new standalone USB 3.0 PHY driver.
Thanks to that we don't need out of tree patch adding PHY initialization
to the controller driver anymore.
2016-10-02 00:22:57 +02:00
Rafał Miłecki
28974de663 bcm53xx: drop unneeded fix for usb3-lpm-capable DT property
This problem has been fixed by upstream commit 757de492f2d ("xhci: fix
platform quirks overwrite regression in 4.7-rc1").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-01 19:18:05 +02:00
Rafał Miłecki
d7e41df24a bcm53xx: switch to standalone USB 2.0 PHY driver
This drops built-in support for USB 2.0 PHY and starts using separated
driver that was upstreamed & backported some time ago.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-01 16:52:08 +02:00
Rafał Miłecki
7120a43013 bcm53xx: add patch specifying USB controllers in DT
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-01 16:52:08 +02:00
Rafał Miłecki
d5dcb1bf97 bcm53xx: backport BCM5301X patches from 2019-09-30
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-30 23:39:28 +02:00
Rafał Miłecki
1ac5cf7713 bcm53xx: move BCM53573 USB 2.0 patch to use backports prefix
It was pushed into the usb-next branch.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-21 14:20:20 +02:00
Rafał Miłecki
41a582a986 bcm53xx: use upstream accepted ILP clk driver for BCM53573
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-17 21:43:29 +02:00
Rafał Miłecki
b964196c68 bcm53xx: use the latest submitted version of ILP clock driver
It switched to syscon to better describe PMU block.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-13 12:25:50 +02:00
Rafał Miłecki
2c38b6e076 bcm53xx: specify brcmfmac firmware for every device
This will allow us to include required firmwares only and save some
rootfs space.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-13 11:03:43 +02:00
Felix Fietkau
d27bce8d28 build: drop UBI EOF marker from images by default
Only add them where they are actually required.
Should help with compatibility issues with stock U-Boot images that
access UBI

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-12 18:21:52 +02:00
Mathias Kresin
e7ec7a08aa image: use k as unit suffix for blocksize
Use k as unit suffix for kilobyte to have a the same unit regardless of
the used filesystem.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 08:56:05 +02:00
Mathias Kresin
85fefcdb61 kernel: mtd: backport Macronix sector size fix
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 09:27:09 +02:00
Rafał Miłecki
232767edf0 bcm53xx: enable switch port 5 on Tenda AC9
Now b53 forces port 5 link when needed, we can enable it on Tenda AC9
and start using eth1.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-08 23:24:43 +02:00
Rafał Miłecki
dd158ef346 bcm53xx: use upstream queued patches for R8500 and AC9
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-08 22:53:37 +02:00
Felix Fietkau
aa53f78038 build: fix subtarget descriptions
Move Target/Description above the target.mk include

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-04 13:35:11 +02:00
Rafał Miłecki
1bb914dbed bcm53xx: use the latest 6th version of ILP clock driver patch
It still wasn't accepted, so don't switch to 0xx prefix yet.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-26 17:03:40 +02:00
Rafał Miłecki
fcdba8d590 bcm53xx: backport patch adding ARCH_BCM_53573 symbol
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-23 07:13:07 +02:00
Rafał Miłecki
28d641be43 bcm53xx: update copy of ASM entry flushing whole D-cache
Previous version was based on code from kernel 2.6.22 with Broadcom two
trivial modifications. This updates the copy to the version from current
kernel and refreshes the patch.

This was tested for regressions on Netgear R6250 (BCM4708A0), D-Link
DIR-885L (BCM4709C0) and Tenda AC9 (BCM47189B0).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-19 12:47:58 +02:00
Rafał Miłecki
1bef5050ef bcm53xx: build Tenda AC9 image
We finally got kernel booting on this device and LAN ports are working,
so it won't "brick" the device. One more big missing thing is WAN port
support. It requires fix for BCM53125 to get switch port 5 working.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-19 11:38:44 +02:00
Rafał Miłecki
5e885c09c6 bcm53xx: switch back to standalone ASM entry flushing cache
Over a year ago in a commit ac96a1665a ("bcm53xx: update Disable MMU
and Dcache during decompression") we switched to Florian's patch for
workarounding CFE bug. The main difference was using a part of existing
__armv7_mmu_cache_flush instead of implementing flushing separately.

This worked well for Northstar devices but doesn't work for BCM53573 as
these devices simply don't start booting with Florian's patch. It's
because of the ldmfd ASM instruction in the __armv7_mmu_cache_flush.

So this commit switches back to using standalone implementation. This
time instead of copying Broadcom's copy of cache-v7.S, we just make a
copy of the original file on our own. Unfortunately we can't cross-dir
compile cache-v7.S from ../../mm/ as that one also adds __INITDATA with
define_cache_functions v7 which would just trigger
> Error: unrecognized/unsupported machine ID (r1 = 0x0000007f).

The only real change Broadcom did in copied .S file was modifying mcr
instruction to use c6 instead of c14. It isn't clear to me if we really
need it, but let's use it for now.

By the way we also update commit message of the
[PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression

This makes kernel booting on BCM53573 successfully.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-19 11:38:44 +02:00
Rafał Miłecki
d22ae5e888 bcm53xx: package drivers for Northstar USB PHYs
We don't use them yet as we still init PHY in controller driver but they
will be needed soon.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-19 11:38:44 +02:00
Rafał Miłecki
31fada8bec bcm53xx: generate proper network config for Tenda AC9
It's a more complex device with 2 interfaces on the SoC, one we can use
for LAN and another for WAN.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-18 10:40:49 +02:00
Rafał Miłecki
93f2aa44f7 kernel: bgmac: backport patch adding platform support
It also reworks bcma support by moving specific code to separated file.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-17 12:41:20 +02:00
Rafał Miłecki
5846620890 bcm53xx: fix warning caused by m25p80 patch
It was adding unused variable:
drivers/mtd/devices/m25p80.c: In function 'm25p80_write':
drivers/mtd/devices/m25p80.c:85:6: warning: unused variable 'i' [-Wunused-variable]
  int i;
      ^

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-16 17:14:14 +02:00
Rafał Miłecki
27b078e83a bcm53xx: add quick fixes for BCM53573
It adds and uses ILP clock that requires some other work (in progress)
for upstreaming it. Other than that it adds a quick fix for bcma to add
serial flash before trying to read SPROM.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-15 12:49:16 +02:00
Rafał Miłecki
38750ce739 bcm53xx: add temporary BCM53573 ILP clock driver
It wasn't accepted upstream as there was a discusson on Northstar vs.
BCM53573. Once we get a new ARM arch Kconfig entry it should be
possible to upstream it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-15 10:20:43 +02:00
Rafał Miłecki
dd7eddcb08 bcm53xx: prepare for building Tenda AC9 TRX image
It'll be enabled when we complete basic support.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-15 09:33:04 +02:00
Rafał Miłecki
857f00a9f7 bcm53xx: drop target's preinit network support script
We don't need it anymore since the rework of generic preinit script.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-14 23:14:15 +02:00
Rafał Miłecki
5b1c00e4fa bcm53xx: support USB 2.0 controller on BCM53573
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-14 13:05:23 +02:00
Rafał Miłecki
62c5f68095 bcm53xx: backport USB 3.0 controller init patch
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-14 12:41:32 +02:00
Rafał Miłecki
e674c1aab3 bcm53xx: backport USB 3.0 Northstar PHY driver
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-14 11:31:17 +02:00
Rafał Miłecki
b9d8c81018 bcm53xx: rename PHY patches to use 07* prefix
This is not a strict rule but it matches better this one:
7xx - network / phy driver patches

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-14 11:22:58 +02:00
Rafał Miłecki
fa350d5aba bcm53xx: add profiles for Buffalo devices
This generates proper images when using CONFIG_TARGET_MULTI_PROFILE and
CONFIG_TARGET_PER_DEVICE_ROOTFS.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-11 12:17:06 +02:00
Rafał Miłecki
b835d7e811 bcm53xx: include USB modules in images for devices with USB ports
This allows using USB out of the box.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-11 11:59:28 +02:00
Rafał Miłecki
0b9de8daa7 bcm53xx: add profiles for all other (SoftMAC) devices
Thanks to this images for SoftMAC devices don't get brcmfmac anymore and
b43 is added for devices with (quite poor) support only.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-11 11:31:46 +02:00
Rafał Miłecki
d378a7c4f7 bcm53xx: convert (disabled) Netgear R8500 image to own profile
It should be the last device with FullMAC chipset to convert.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-11 08:28:41 +02:00
Rafał Miłecki
931d309203 bcm53xx: add profile with brcmfmac for Netgear R7900
It's one more device with FullMAC that got forgotten in the previous
commit.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-11 07:46:17 +02:00
Rafał Miłecki
c769c1b584 bcm53xx: add profiles for devices with FullMAC chipsets
This allows building images for selected devices with brcmfmac only
(without b43 which is for SoftMAC devices).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Jo-Philipp Wich <jo@mein.io>
2016-08-10 20:41:53 +02:00
Felix Fietkau
63b525dd6b image: add a helper variable for getting kernel/rootfs from within image Build/* templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:25 +02:00
Rafał Miłecki
f6a86ba066 bcm53xx: enable kernel symbols/drivers needed for BCM53573
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-28 14:05:41 +02:00
Rafał Miłecki
2552e9319e bcm53xx: backport DTS patches for USB 2.0 and Tenda AC9
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-28 12:59:23 +02:00
Rafał Miłecki
a3be48593b bcm53xx: refresh kernel patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-28 12:45:02 +02:00
Rafał Miłecki
60d2620253 kernel: update bcma backporting changes up to 4.8
This allows building bcm47xxsflash on ARM.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-20 13:42:42 +02:00
Felix Fietkau
8e2764ce9b image.mk: clean up redundant code related to DEVICE_DTS
It is used by a core build template, so the variable should be
initialized and added to DEVICE_VARS in the core.
Same for DEVICE_DTS_DIR

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-15 14:14:11 +02:00
Rafał Miłecki
c940ccedd8 bcm53xx: image: don't suppress "mv" command echoing
We call all commands normally, with standard echoing. It's useful for
debugging with V=s. Don't make lzma compression an exception, it's a bit
confusing this way.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-14 11:31:26 +02:00
Felix Fietkau
b3b797076e bcm53xx: simplify image building code
Use append-ubi template for ubinize, remove mkfs override

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-14 10:27:45 +02:00
Felix Fietkau
dbc416b6ec bcm53xx: remove duplicate template data from the image makefile
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-14 10:27:30 +02:00
Hauke Mehrtens
efa1960abb kernel: update kernel 4.4 to version 4.4.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-13 15:39:15 +02:00
Felix Fietkau
fac693441f bcm53xx: fix kernel config after USB2 PHY driver backport
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-08 13:45:36 +02:00
Rafał Miłecki
1692c71564 bcm53xx: use upstream fix simplifying USB power GPIO usage
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-07 15:07:02 +02:00
Rafał Miłecki
c74c227e5b bcm53xx: backport driver for Northstar's USB 2.0 PHY
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-07 14:50:17 +02:00
Rafał Miłecki
e71fffed64 bcm53xx: backport BCM5301x patches from 2016-07-06
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-07 13:54:55 +02:00
Rafał Miłecki
eaf0d22421 bcm53xx: calculate Seama MD5 using content of kernel partition
We don't want checksum to cover any part of UBI as even its part with
SquashFS may be changed due to e.g. flash wearing.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-04 12:32:12 +02:00
Rafał Miłecki
3c014dc306 Revert "bcm53xx: use uncompressed zImages"
This reverts commit b3be33f135.

CFE is known to fail in some non-standard cases, e.g. when using kernel
or format different that what was tested by Broadcom. This kernel change
triggered some problem with booting OpenWrt kernel stored in Seama.

As long as Seama checksum was covering enough data, it was working fine.
We need to change it however, because calculating MD5 over part of UBI
containing SquashFS is unsafe. UBI may move PEBs depending on flash
wearing level which would break CFE booting the image.

For some reason this kernel change was breaking CFE. Calculating MD5
over 0x47ffc0 B data or less (there is 0x40 B long header) was stopping
booting process at:
Starting program at 0x00008000

As our kernel is usually 0x3fffc0 B it was affected by this problem.

Reverting this change fixes sysupgrade (which already uses kernel size
for MD5 calculation) and will allow us to adjust "fixseama" command call
on the first boot.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-04 12:32:12 +02:00
Ben Whitten
b7baaaf782 kernel: Move append-dtb to common image-commands
This build step is used by various targets, move it to a common section.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2016-06-22 19:32:06 +02:00
Rafał Miłecki
a180f90518 bcm53xx: backport BCM5301X patches for SRAB
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-20 23:07:31 +02:00
Rafał Miłecki
776b24d9aa bcm53xx: properly support sysupgrade using Seama on NAND devices
It updates kernel and then formats UBI without loosing erase counters.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-20 08:02:32 +02:00
Rafał Miłecki
cf6d9d97fb kernel: rename B53 symbols to avoid upstream kernel conflict
In kernel 4.7 there is upstreamed b53 driver using (mostly?) the same
symbols as our b53 does. Change our symbols so both drivers can coexist
in kernel tree.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-20 08:00:14 +02:00
Felix Fietkau
b3be33f135 bcm53xx: use uncompressed zImages
The boot loader expects LZMA compressed kernel images

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-15 14:36:47 +02:00
Felix Fietkau
f27c70ff8c bcm53xx: refresh kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-15 14:36:47 +02:00
Rafał Miłecki
489efcfd62 bcm53xx: refresh kernel config
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-14 12:19:38 +02:00
Rafał Miłecki
cb0de9a68e bcm53xx: sysupgrade: move TRX specific code to separated function
This will allow adding support for other formats (e.g. Seama) in a clean
way.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-13 22:52:04 +02:00
Rafał Miłecki
1f86257c2f bcm53xx: pass datasize to mtd in hexadecimal format
This avoids extra calculation in bash script.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-11 01:38:00 +02:00
Rafał Miłecki
c40e96d133 bcm53xx: fix partition typos in 09_fix_crc
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-11 01:37:41 +02:00
Rafał Miłecki
95d8568cb8 bcm53xx: calculate TRX CRC32 using whole kernel partition
This provides better protection of flash data.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-10 12:58:19 +02:00
Felix Fietkau
7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Álvaro Fernández Rojas
a105eac4dd kernel: update kernel 4.4 to version 4.4.12
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-02 15:34:34 +02:00
Rafał Miłecki
01714243b9 bcm53xx: drop Copyright header from two of my bash scripts
Both scripts modified by this patch were added by me. First of all I
incorrectly added OpenWrt as Copyright holder. It was wrong because:
1) I simply can't transfer my moral rights according to the Polish law
2) Transfering copyrights (economic rights) requires an agreement which
   I didn't sign with OpenWrt(.org).
Other than that I don't find these trivial scripts important enough to
put info about *my* copyrights in a header so this patch just drops them
completely.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-18 08:35:00 +02:00
Felix Fietkau
3f1705d777 bcm53xx: delete old kernel versions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:54:14 +02:00
Álvaro Fernández Rojas
b062266ad6 kernel: update kernel 4.4 to version 4.4.9
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-10 10:43:17 +02:00
Rafał Miłecki
cf3b3cfc56 bcm53xx: add m25p80 workaround for SPI flash writing problems
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49264
2016-04-28 11:48:51 +02:00
Rafał Miłecki
9e4d671f75 bcm53xx: support SPI-NOR on dual flash devices
We need it to access NVRAM.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49262
2016-04-28 11:48:51 +02:00
Rafał Miłecki
741715331a bcm53xx: switch to m25p80 and drop bcm53xxspiflash
For some time now m25p80 supports 32 MiB flashes and we just needed to
patch spi-nor to support JEDEC incompatible w25q128. Also by switching
to m25p80 we gain accelerated SPI flash reads.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49260
2016-04-28 11:48:50 +02:00
Rafał Miłecki
73d51d7b5d bcm53xx: support JEDEC incompatible w25q128 in spi-nor
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49259
2016-04-28 11:48:50 +02:00
Rafał Miłecki
e53d533a24 bcm53xx: backport BCM5301X DT patch specifying SPI controller
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49232
2016-04-26 09:22:49 +00:00
Rafał Miłecki
2be5203055 bcm53xx: bump maximum TRX size for devices with serial flash
It was already increased for NAND devices so do the same for the ones
with serial memory.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49207
2016-04-20 18:14:01 +00:00
Hauke Mehrtens
f0b3964f1b kernel: update kernel 4.4 to version 4.4.7
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49176
2016-04-16 21:05:48 +00:00
Rafał Miłecki
d30766c986 bcm53xx: backport BCM5301X earlycon and USB VCC patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49166
2016-04-14 05:54:20 +00:00
Rafał Miłecki
93550152ed bcm53xx: add switch config workaround for R8500 and DIR-885L
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49160
2016-04-09 13:23:25 +00:00
Rafał Miłecki
e2893fa8c3 bcm53xx: fix regression in generating network config
Syntax error was added in r49122.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49159
2016-04-09 13:20:19 +00:00
Rafał Miłecki
997a3cb41c bcm53xx: add basic support for Netgear R7900
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49122
2016-04-09 09:59:21 +00:00
Rafał Miłecki
c658bd634c bcm53xx: add PCI iproc patch adding abort handler
This prevents die() during PCI bus probe.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49121
2016-04-08 20:37:14 +00:00
Rafał Miłecki
51d887ba00 Revert "bcm53xx: revert patch removing imprecise abort workaround"
This reverts commit r48961. It didn't fix PCIe host driver issue as
there are more aborts triggered by it.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49120
2016-04-08 20:36:57 +00:00
Rafał Miłecki
faf172875e bcm53xx: use the final fix for iproc bcma regression
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49114
2016-04-01 16:49:50 +00:00
Rafał Miłecki
970dc268e7 bcm53xx: drop unneeded 4.3 SPROM patch
4.3 isn't oficially used anymore but it may be useful for debugging PCI
host driver regression. SPROM driver doesn't seem to work correctly with
4.3:
[    2.336686] bcma: bus0: Using fallback SPROM failed (err -2)
[    2.342366] bcma: bus0: No SPROM available
but it at least compiles now.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49113
2016-04-01 16:49:34 +00:00
Rafał Miłecki
e3e8a85c4f bcm53xx: improve USB 2.0 PHY support for BCM4709 and BCM47094
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49094
2016-03-30 12:26:24 +00:00
Rafał Miłecki
de2f31c3f5 bcm53xx: support USB 3.0 PHY on BCM4707 rev. 6 and BCM47094
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49091
2016-03-30 10:23:02 +00:00
Rafał Miłecki
7b61ed5254 bcm53xx: simpify USB 3.0 PHY initialization
We can use one code path for BCM4707 rev. 4 and BCM53018.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49090
2016-03-30 10:22:57 +00:00
Hauke Mehrtens
fcbc97ad78 kernel: update kernel 4.1 to version 4.1.20
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49035
2016-03-18 23:41:21 +00:00
Rafał Miłecki
baf0b18653 bcm53xx: update bcm47xx_sprom to the latest 4.6 queued version
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48963
2016-03-08 11:05:10 +00:00
Rafał Miłecki
81edbe39b8 bcm53xx: fix SPROM driver compilation with ssb/bcma as module
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48962
2016-03-08 08:29:32 +00:00
Rafał Miłecki
9f116fae92 bcm53xx: revert patch removing imprecise abort workaround
It seems it still happens on some devices.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48961
2016-03-08 08:29:29 +00:00
Rafał Miłecki
dab0569b97 bcm53xx: use SPROM driver queued for 4.6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48935
2016-03-06 18:08:03 +00:00
Hauke Mehrtens
cb04b8d582 kernel: update kernel 4.4 to version 4.4.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48783
2016-02-25 21:54:39 +00:00
Rafał Miłecki
406a288a3b bcm53xx: add Netgear R8500 GPIOs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48633
2016-02-05 12:33:50 +00:00
Rafał Miłecki
3b76c7cf0b bcm53xx: start working on Netgear R8500
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48625
2016-02-03 22:32:07 +00:00
Rafał Miłecki
a8c2701866 bcm53xx: fix bcma-hcd compilation in kernel 4.4
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48607
2016-02-01 12:54:17 +00:00
Rafał Miłecki
8095667532 bcm53xx: build D-Link DIR-885L image
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48606
2016-02-01 12:43:04 +00:00
Rafał Miłecki
88deb4aec1 bcm53xx: change brcmnand behavior for ECC strength 1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48605
2016-02-01 12:42:51 +00:00
Rafał Miłecki
f188b6d512 bcm53xx: fix NAND parameters on DIR-885L
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48604
2016-02-01 12:42:42 +00:00
Rafał Miłecki
701dba093f bcm53xx: add brcmnand patch reading flash parameters
It's useful for adding support for new hardware.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48603
2016-02-01 12:42:23 +00:00
Rafał Miłecki
78abece62f bcm53xx: include (build) Seama mtdsplit parser
It's needed for devices using Seama like D-Link DIR-885L.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48602
2016-02-01 12:42:07 +00:00
Rafał Miłecki
9a69e00baa bcm53xx: support Netgear R8500 in sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48572
2016-01-30 16:57:35 +00:00
Rafał Miłecki
12ec144892 bcm53xx: use proper CPU port in b53 for Netgear R8500
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48571
2016-01-30 16:56:50 +00:00