Commit Graph

1227 Commits

Author SHA1 Message Date
John Crispin
48feea4861 Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36289
2013-04-09 14:19:33 +00:00
John Crispin
e468abcae0 remove bootargs from dts
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36288
2013-04-09 14:19:28 +00:00
John Crispin
82c3b7ce26 add ofpart info to the devicetrees
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36287
2013-04-09 14:19:24 +00:00
John Crispin
f1e9d30ffc add sample swconfig portmap
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36286
2013-04-09 14:19:20 +00:00
Gabor Juhos
130f67210a ramips: TEW-691GR.dts fixes
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36276
2013-04-08 12:34:17 +00:00
Gabor Juhos
82705b30b3 ramips: OMNI-EMB-HPM.dts fixes
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36273
2013-04-08 11:12:03 +00:00
Gabor Juhos
909fabe574 ramips: add mdio-bus node to rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36272
2013-04-08 11:12:02 +00:00
Gabor Juhos
30e5bae84a ramips: fix console speed for OMNI-EMB-HPM
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36270
2013-04-08 08:24:51 +00:00
Gabor Juhos
4c85227cf4 ramips: TEW-692GR.dts fixes
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36268
2013-04-08 07:11:35 +00:00
Gabor Juhos
97635d7a8e ramips: add PCI node into RTN56U.dts
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36264
2013-04-07 20:56:22 +00:00
Gabor Juhos
474264f64c ramips: add PCI node for rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36263
2013-04-07 20:56:21 +00:00
Gabor Juhos
16d0ce52b0 ramips: fix polarity of GPIO buttons for RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36257
2013-04-07 16:24:33 +00:00
Gabor Juhos
d1f28c6d1f ramips: add nor-flash node for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36249
2013-04-07 14:46:11 +00:00
Gabor Juhos
0c3c29ca38 ramips: fix pinmux settings for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36248
2013-04-07 14:46:10 +00:00
Gabor Juhos
aedf05caa0 ramips: remove trailing whitespaces from dts files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36246
2013-04-07 13:32:37 +00:00
John Crispin
811f7f9f2d fix typos inside dts files
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>

SVN-Revision: 36244
2013-04-07 11:47:03 +00:00
John Crispin
709b19ed9f fix default commandline in dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36243
2013-04-07 11:46:54 +00:00
Gabor Juhos
10d8e4b66c ramips: remove top-level {address,size}-cells properties from .dts files
Those are defined in the SoC specific .dtsi files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36237
2013-04-07 08:19:10 +00:00
Gabor Juhos
756b810178 ramips: fix ethernet switch node in DIR-645.dts
Fix a typo in the node name and add vendor prefix
for the compatible string.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36231
2013-04-06 17:19:35 +00:00
Gabor Juhos
1ef39b43dd ramips: remove spi node from RTN56.dts
The RT-N56U board uses a parallel flash.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36223
2013-04-06 12:37:40 +00:00
Gabor Juhos
d57e662cda ramips: fix ethernet switch node in RTN56U.dts
The RT-N56U uses an RTL8367M switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36222
2013-04-06 12:37:38 +00:00
John Crispin
d16de0b69f fix typo pinmmux -> pinmux
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36216
2013-04-06 11:46:34 +00:00
John Crispin
e1a74d8ff7 fix typo that made gpiomuxing fail
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36212
2013-04-05 23:10:42 +00:00
John Crispin
93899a1329 add profile for tenda w150m board
http://patchwork.openwrt.org/patch/3371/

Signed-off-by: Chi Zhang <zhangchi866@gmail.com>

SVN-Revision: 36176
2013-04-03 10:00:21 +00:00
John Crispin
910b705155 add Huawei D105
http://patchwork.openwrt.org/patch/3510/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 36173
2013-04-03 10:00:08 +00:00
John Crispin
c1710901c5 add profile for the Edimax 3g-6200NL board
http://patchwork.openwrt.org/patch/3214/

Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>

SVN-Revision: 36172
2013-04-03 10:00:03 +00:00
John Crispin
770b28f146 add the dts files that describe the boards in future
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36168
2013-04-03 09:59:46 +00:00