5 Commits

Author	SHA1	Message	Date
Mathias Kresin	8f4dfadd5a	ramips: add support for indicating the boot state using multiple leds ... Use diag.sh version used for other targets supporting different leds for the different boot states. The existing led sequences should be the same as before. Signed-off-by: Mathias Kresin <dev@kresin.me>	2018-10-07 11:34:18 +02:00
Alex Maclean	6031ab345d	ramips: move partitions into partition table node ... Starting with kernel 4.4, the use of partitions as direct subnodes of the mtd device is discouraged and only supported for backward compatiblity reasons. Signed-off-by: Alex Maclean <monkeh@monkeh.net>	2018-08-04 08:39:35 +02:00
Mathias Kresin	53624c1702	ramips: fix dtc warnings ... Fix individual boards dtc warnings or obvious mistakes. Signed-off-by: Mathias Kresin <dev@kresin.me>	2018-08-04 08:39:35 +02:00
Chuanhong Guo	c9c4b2116c	ramips: Use dts alias based status led ... Also fix several typos in led node name. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>	2018-07-16 15:12:18 +02:00
Pavlo Samko	82f9486142	ramips: add support for TRENDnet TEW-638APB V2 ... This patch add support for the TRENDnet TEW-638APB V2. Specification: - SoC: Ralink SoC RT3052F - Flash: 4MB - RAM: 32MB - Ethernet: 1x LAN (100 Mbps) - Wireless: 2.4GHz b/g/n, 2x external antenna - Buttons: 1x Reset, 1x WPS - LEDs: Power (green), Ethernet (green), WPS (green and orange), Wireless (green) - UART: 1x UART on PCB (3.3V, GND, RX, TX) - 57600 8N1 Installation via vendor firmware: - upload sysupgrade.bin image via TFTP: - stop uboot into tftp-load into option "2" - upload sysupgrade.bin image Signed-off-by: Pavlo Samko <bulldozerbsg@gmail.com>	2017-06-17 15:38:19 +02:00