Commit Graph

112 Commits

Author SHA1 Message Date
Hauke Mehrtens
ef0416666f uboot-sunxi: fix build by adding comparabilities for old dtc
We use the dtc from the kernel and that does not have all the options
which u-boot would like to use now. make these parameters optional.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-02-10 15:39:00 +01:00
Hauke Mehrtens
f142de5f44 uboot-sunxi: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-02-10 15:39:00 +01:00
Zoltan HERPAI
805f756d6e uboot-sunxi: bump to 2017.11
Runtime-tested on:
 - Pine64 (A64)
 - Orange Pi 2 (H3)
 - Bananapro (A20)
 - Olimex A20-Micro (A20)
 - Pcduino v3 (A20)
 - Pcduino v2 (A10)

Compile-tested on:
 - all A8/A7/A53 boards

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-06 12:52:00 +01:00
Hauke Mehrtens
332438be40 uboot-sunxi: fix build of HAOYU Electronics Marsboard A10
The uboot target is named MarsBoard_A10 and it was not build at all.
This fixes a build problem seen by the build bot.

Fixes: 6a3565985f ("sunxi: Added profile for HAOYU Electronics Marsboard A10")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-11-23 21:25:46 +01:00
Luis Araneda
bf6b3afa8c uboot-sunxi: add NanoPi M1 Plus board
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-11-17 08:20:06 +01:00
Zoltan HERPAI
f9ecb0d562 sunxi: add Orange Pi 2 support
- H3 @ 1.3 GHz
- 1GiB DDR3
- 10/100Mbps Ethernet
- Realtek RTL8189ETV wifi
- 4 USB 2.0

Difference to the "Orange Pi Plus" is the lack of Gbit ethernet
and lack of onboard flash.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-11-06 16:39:41 +01:00
Kayo Phoenix
6a3565985f sunxi: Added profile for HAOYU Electronics Marsboard A10
The MarsBoard was a short-lived credit-card sized, extendable board with an Allwinner A10 SoC.
http://linux-sunxi.org/MarsBoard_A10

Signed-off-by: Kayo Phoenix <kayo@illumium.org>
[Forward-ported to new target layout:]
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-11-06 16:39:41 +01:00
Florian Fainelli
1a53315951 uboot-sunxi: Backport fix for stale CONFIG_SUNXIG_GMAC references
This backports the upstream commit fixing stale references to
CONFIG_SUNXI_GMAC which have been later replaced by CONFIG_SUN7I_GMAC.
This fixes the designware MAC pinmuxing on e.g: Lamobo R1.

Refresh patches while we are at it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-23 18:42:25 -07:00
Daniel Golle
b80f6a5876 uboot-sunxi: build for NanoPi NEO
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-10-08 17:16:39 +02:00
Hauke Mehrtens
5508510e74 sunxi: add Orange Pi R1 support
The following features are working and tested:
* both Ethernet ports
* MMC
* LED

The following features are not working:
* Wifi (There is a crappy driver we could port)
* SPI flash (I haven't looked into this)

I haven't tried out the rest.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 17:10:33 +02:00
Lucian Cristian
1114f5dc10 sunxi: improve A20 Lime2 upload speed
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-09-30 23:50:57 +02:00
Lucian Cristian
a7465f375a sunxi: add Olimex A20-OLinuXino-LIME2-eMMC
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
[replaced u-boot patch with original version from u-boot git]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-24 16:28:28 +02:00
Lucian Cristian
f295db6e46 sunxi: add Olimex A20-OlinuXino-LIME2
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-09-18 21:29:16 +02:00
Hauke Mehrtens
e080a7ce07 uboot-sunxi: build A64 SoC and pine64 U-Boot
This creates a U-Boot for the aarch64 SoC A64 on the pine64 board.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:27 +02:00
Hauke Mehrtens
41e7d2e2e8 sunxi: split into cortex A8 and A7 subtarget
Now we can activate some compiler optimizations for the cortex A7.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Hauke Mehrtens
b9a35920bf uboot-sunxi: revert the usage of binman
This will avoid the usage of swig.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Hauke Mehrtens
85b7d780c5 uboot-sunxi: do not depend on dtc being install on host
make mkimage check the DTC environment variable first.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Hauke Mehrtens
1422d4435b uboot-sunxi: update to version 2017.07
The deleted patches are already integrated in the upstream U-Boot
version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Jo-Philipp Wich
cf3d1b61bf sunxi: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Felix Fietkau
e018c4d7ab uboot-sunxi: clean up, switch to u-boot.mk
Instead of referencing u-boot packages from device profiles and having a
-all metapackage, make the u-boot packages hidden (they don't install to
bin/ anyway), and name the files in KERNEL_BUILD_DIR appropriately

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:25 +01:00
Felix Fietkau
fbe3e22507 uboot-sunxi: enable parallel build
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-05 11:09:15 +01:00
Yousong Zhou
6268d496a4 uboot-sunxi: add uboot-sunxi-all for selecting all other variants
While at it, the following changes are introduced

 - Rewrite the Makefile for better readability
 - Make parallel builds possible

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:14 +01:00
Felix Fietkau
720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
Jo-Philipp Wich
7a58972680 uboot-sunxi: fix default config for OLIMEX A13 SOM (FS#239)
The current uboot default config for the A13 SOM erroneously enables support
for the AXP209 power regulator IC which is not present on the board.

This superfluous support module sets an incorrect initial clock frequency and
confuses the kernel, ultimately leading to a boot failure later on.

Properly disable the PMIC support and enable the EHCI support by translating
the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and
USB_EHCI_HCD symbols respectively.

Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and
refresh the remaining patches of the series while we're at it.

Reported-by: Mario Fischer <mario-fischer@web.de>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-02 02:11:19 +01:00
Zoltan Herpai
2d4ebff3ad package: uboot-sunxi: various changes - bump to 2016.03 - add bugfixes related to 2016.03 update - sync DTS files with mainline - add support for non-standard uEnv.txt - add initial support for Theobroma A31-yQ7 devboard
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 49089
2016-03-29 11:42:14 +00:00
Zoltan Herpai
87b150dc05 packages: uboot-sunxi: fix SATA powerup on Bananapro
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48619
2016-02-02 23:13:29 +00:00
Zoltan Herpai
39f385d0d6 packages: bump uboot-sunxi to 2016.01
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48252
2016-01-15 20:27:32 +00:00
Zoltan Herpai
f15fc140f1 packages: bump uboot-sunxi to 2016.01-rc3, along with H3 PSCI/SMP patches
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48154
2016-01-08 20:37:43 +00:00
Zoltan Herpai
0f18228a3a packages: bump uboot-sunxi to enable H3 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 47959
2015-12-22 13:04:31 +00:00
Zoltan Herpai
d5a77a0dbc packages: uboot-sunxi: update Lamobo R1 patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 47516
2015-11-19 14:43:16 +00:00
Zoltan Herpai
cd73603269 packages: uboot-sunxi: fix mmc transfer timeout for slow sdcards.
This should fix a issue reported in ticket #20387.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 46894
2015-09-13 15:11:27 +00:00
Zoltan Herpai
58fc927889 sunxi: fix uboot install location
Install uboot files to KERNEL_BUILD_DIR instead of BIN_DIR to fix
ImageBuilder. Similar fixes are necessary for many (all?) other uboot
targets.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 46605
2015-08-15 14:34:42 +00:00
Zoltan Herpai
a33a567b39 packages: uboot-sunxi: bump to 2015.07 - switch to using kernel-supplied dtc - refresh olimex-a13-som and lamobo-r1 patches (compile-tested only)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46540
2015-07-31 21:58:31 +00:00
Zoltan Herpai
be86eab8e6 packages: uboot-sunxi: add support for Lamobo R1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44067
2015-01-20 22:50:52 +00:00
Zoltan Herpai
9b103cc1f3 packages: uboot-sunxi: fix GMAC TX delay for Bananapi
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44066
2015-01-20 22:49:47 +00:00
Zoltan Herpai
a5c36c26eb packages: uboot-sunxi: uEnv is used as a script rather than default env
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44048
2015-01-19 00:00:57 +00:00
Zoltan Herpai
8bf446a16b packages: uboot-sunxi: re-add Olimex A13 SOM which went AWOL in u-boot trunk
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 44039
2015-01-18 16:56:08 +00:00
Zoltan Herpai
4d0d09be10 packages: uboot-sunxi: remove unused Hackberry target
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 44038
2015-01-18 16:47:50 +00:00
Zoltan Herpai
d41d7cc199 packages: update uboot-sunxi to 2015.01
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44035
2015-01-18 16:42:42 +00:00
Zoltan Herpai
2513eb6c19 uboot-sunxi: fix bananapro target, update patch
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43921
2015-01-10 19:12:35 +00:00
Zoltan Herpai
157e1da749 uboot-sunxi: various updates - use mainline uboot-sunxi version (2015.01-rc3) - add support for Bananapro
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43899
2015-01-09 19:19:35 +00:00
Luka Perkov
44d5800fe1 uboot-*: update license info in uboot packages
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43429
2014-11-29 23:45:53 +00:00
Nicolas Thill
8db5c4038d uboot-sunxi: add support for Olimex A20-OLinuXino-LIME
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 43188
2014-11-06 00:05:15 +00:00
Nicolas Thill
e39e1ba005 uboot-sunxi: cosmetic changes
This will ease adding new targets and updating:
 * split UBOOTS var into multiple lines
 * remove version from TITLE

Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 43187
2014-11-06 00:05:10 +00:00
John Crispin
74a3a77bcd license info - revert r43155
turns out that r43155 adds duplicate info.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43167
2014-11-03 09:56:44 +00:00
John Crispin
c10d97484a Add more license tags with SPDX identifiers
Note, that licensing stuff is a nightmare: many packages does not clearly
state their licenses, and often multiple source files are simply copied
together - each with different licensing information in the file headers.

I tried hard to ensure, that the license information extracted into the OpenWRT's
makefiles fit the "spirit" of the packages, e.g. such small packages which
come without a dedicated source archive "inherites" the OpenWRT's own license
in my opinion.

However, I can not garantee that I always picked the correct information
and/or did not miss license information.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43155
2014-11-03 08:01:08 +00:00
Zoltan Herpai
4e4be0bfa1 uboot-sunxi: add support for Olimex A13 SOM
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42692
2014-09-28 23:20:36 +00:00
Zoltan Herpai
b595d02fa7 uboot-sunxi: add patch to fix gmac reliability issue on bananapi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42691
2014-09-28 20:39:04 +00:00
Zoltan Herpai
0a57901ceb uboot-sunxi: add PSCI support for bringing up secondary core on A20
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42587
2014-09-17 08:25:04 +00:00
Zoltan Herpai
14cf28b284 uboot-sunxi: bump to 2014.04
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42422
2014-09-06 15:18:40 +00:00
Zoltan Herpai
d00f7b05c8 uboot-sunxi: add bananapi support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40899
2014-06-01 18:47:14 +00:00
Zoltan Herpai
af3a3f8a9a uboot-sunxi: update pcDuino3 config - beef up memory clock to 480 - fix network config
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40714
2014-05-06 20:22:45 +00:00
Zoltan Herpai
9ee3edb4ca uboot-sunxi: add support for LinkSprite pcDuino v3 (a20)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40605
2014-04-30 19:37:56 +00:00
Zoltan Herpai
6892ed8193 uboot-sunxi: bump u-boot version - update u-boot to 2014.01-rc1 - smp support on a20
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>

SVN-Revision: 39779
2014-03-05 23:16:18 +00:00
Zoltan Herpai
66543935db uboot-sunxi: various fixes - update A10-Lime support - fix MMC on sun5i with initializing PLL6 correctly
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39470
2014-02-05 08:39:38 +00:00
Zoltan Herpai
16cbe62e9c sunxi: boot changes - Added uEnv.txt to facilitate automatic boot. - Cosmetic fix in u-boot Makefile - Don't force command line arguments
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39438
2014-01-31 15:53:53 +00:00
Zoltan Herpai
01a2ff6925 uboot-sunxi: - add support for Cubietruck - cosmetic change: have the options listed alphabetically
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39261
2014-01-12 19:16:35 +00:00
Zoltan Herpai
f8911b3197 uboot-sunxi: add support for Olinuxino A10 LIME
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39221
2014-01-11 17:17:17 +00:00
Zoltan Herpai
c2f62ecc25 add support for pcDuino board
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39192
2014-01-04 10:09:52 +00:00
Zoltan Herpai
4800b2c723 update version
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39191
2014-01-04 10:08:31 +00:00
Imre Kaloz
f6b57149af FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38943
2013-11-29 10:59:51 +00:00
Zoltan Herpai
5fa0e4fac0 uboot-sunxi: add U-boot builds for a couple sunxi boards
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38785
2013-11-13 10:49:22 +00:00