Gabor Juhos
14d95026b2
ar71xx: rb91x: add SPI device for the serial shift register
...
The RB91x boards are using a serial shift register
connected to the SPI bus to drive some of the LEDs.
Rework the board setup code to register a SPI device
for that. This makes it possible to use the 'spi-74x164'
driver to control the device.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39703
2014-02-23 08:11:52 +00:00
Gabor Juhos
3d906ac6ac
ar71xx: rb91x-nand: rewrite to use GPIO API
...
Rewrite tha rb91x-nand driver to use GPIO API to
modify the NAND control lines.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39700
2014-02-23 07:19:32 +00:00
Gabor Juhos
8fea668cb7
ar71xx: rb91x: register a gpio-latch platform device
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39699
2014-02-22 18:05:32 +00:00
Gabor Juhos
4e0309630b
ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet loss
...
When the RB91x device uses a GbE link the connection
suffers from packet loss:
root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 20 -q
PING 192.168.1.254 (192.168.1.254): 65507 data bytes
--- 192.168.1.254 ping statistics ---
20 packets transmitted, 9 packets received, 55% packet loss
round-trip min/avg/max = 4.570/4.815/4.999 ms
Using a different PLL value fixes the issue.
root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 100 -q
PING 192.168.1.254 (192.168.1.254): 65507 data bytes
--- 192.168.1.254 ping statistics ---
100 packets transmitted, 100 packets received, 0% packet loss
round-trip min/avg/max = 4.449/5.413/13.870 ms
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39642
2014-02-20 17:07:56 +00:00
Gabor Juhos
5237a50089
ar71xx: add initial support for the Mikrotik RB911G/RB912UAG boards
...
It is only on RB911G-5HPnD and RB912UAG-5HPnD boards.
The LEDs and the USB port is not working yet.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39102
2013-12-16 18:08:51 +00:00
