The mt76 driver does load the firmware for the MT7615 chip from
/lib/firmware/mediatek instead of /lib/firmware. The driver loads the
firmware from this path since mt76 commit
ea3ab68c7589 ("mt76: mt7615: fix mt7615 firmware path definitions").
Fixes: a2e2c40b5ebd ("mt76: update to the latest openwrt-19.07 version")
Reported-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Stijn Segers <foss@volatilesystems.org>
330e832 mt76: mt76x0: fix default mac address overwrite
f97c33e mt76: mt7603: fix input validation issues for powersave-filtered frames
875f6d7 mt76: mt7615: increase MCU command timeout
abd7d86 mt76: clear skb pointers from rx aggregation reorder buffer during cleanup
96c7b07 mt76: eeprom: add support for big endian eeprom partition
19c8e20 mt76: fix possible undetected invalid MAC address
df64c56 mt76: Off by one in mt76_calc_rx_airtime()
1702b24 mt76: mt7603: reset STA_CCA counter setting the channel
383a631 mt76: mt76x0u: do not reset radio on resume
2dcfbdd mt76: disable bh in mt76_dma_rx_poll
947d20d mt76: fix rx dma ring descriptor state on reset
f3348f5 mt7615: replace sta_state callback with sta_add/sta_remove
faf5e6f mt76: mt7615: read {tx,rx} mask from eeprom
db78ee0 mt76: move mt76_get_antenna in mt76_core module
7121e16 mt76: fix possible out-of-bound access in mt7615_fill_txs/mt7603_fill_txs
5dfb0ec mt76: mt7615: disable radar pattern detector during scanning
e2f90ad mt76: move interface_modes definition in mt76_core module
cfdb751 mt76: mt7615: add ibss support
e0731a8 mt76: move SUPPORTS_REORDERING_BUFFER hw property in mt76_register_device
a85c06c mt76: use mt76_dev in mt76_is_{mmio,usb}
ea19cd7 mt76: Remove set but not used variable 'idx'
3cbaf81 mt76: mt76u: rely on a dedicated stats workqueue
20f0589 mt76: mt76u: rely on usb_interface instead of usb_dev
f2be00b mt76: dma: fix buffer unmap with non-linear skbs
c14d656 mt76: mt76x2e: disable pcie_aspm by default
58e1e96 mt76: mt7615: remove unneeded semicolon
c93a2d1 mt76: mt76x02u: update ewma pkt len in mt76x02u_tx_prepare_skb
1987b74 mt76: mt76x0: remove 350ms delay in mt76x0_phy_calibrate
50b1e9b mt76: refactor cc_lock locking scheme
d868638 mt76: remove obsolete .add_buf() from struct mt76_queue_ops
dc14ac6 mt7615: remove vif sta from poll list on interface remove
2a0a191 mt7603: remove vif sta from poll list on interface remove
d3a5895 mt76: fix a-mpdu boundary detection issue for airtime reporting
391e148 mt76: add sanity check for a-mpdu rx wcid index
01642d8 mt76: mt76x02: fix use-after-free in tx status code handling airtime
c11a4ad mt76: mt76x0: eeprom: add support for MAC address from OF
d94cc81 mt76: drop rcu read lock in mt76_rx_aggr_stop
7d8764d mt76: avoid enabling interrupt if NAPI poll is still pending
5b02a07 mt76: add missing locking around ampdu action
71c2ef0 mt76: fix aggregation stop issue
6f7d0f5 mt76: fix use-after-free bug in airtime fairness code
8f22de0 mt76: do not use devm API for led classdev
e7199f9 mt76: enable airtime fairness
81f2be0 mt76: mt7615: track tx/rx airtime for airtime fairness
2579122 mt76: mt7615: introduce mt7615_mac_wtbl_update routine
d91f7c1 mt76: mt7615: fix survey channel busy time
028071d mt76: mt7615: report tx_time, bss_rx and busy time to mac80211
0e5050e mt76: mt76x02: track approximate tx airtime for airtime fairness and survey
3429cc7 mt76: mt76x02: move MT_CH_TIME_CFG init to mt76x02_mac_cc_reset
de118bb mt76: unify channel survey update code
fdf0163 mt76: mt7603: switch to a different counter for survey busy time
ee31030 mt76: mt7603: track tx airtime for airtime fairness and survey
f34b1ae mt76: track rx airtime for airtime fairness and survey
a1d6891 mt76: store current channel survey_state in struct mt76_dev
b042987 mt76: rename mt76_driver_ops txwi_flags to drv_flags and include tx aligned4
2027763 mt76: report rx a-mpdu subframe status
1ddcadb mt76: mt7603: remove q_rx field from struct mt7603_dev
ea3ab68 mt76: mt7615: fix mt7615 firmware path definitions
081926a mt76: mt7603: collect aggregation stats
696c0fc mt76: mt7615: collect aggregation stats
23e8aed mt76: move aggr_stats array in mt76_dev
1118b5e mt76: mt7615: add queue entry in debugfs
fbc59e6 mt76: move queue debugfs entry to driver specific code
0b01ace mt76: mt76x02u: move mt76x02u_mac_start in mt76x02-usb module
c394887 mt76: mt76x0u: reset counter starting the device
0355b7a mt76: mt76x2: move mt76x02_mac_reset_counters in mt76x02_mac_start
f3792b5 mt76: mt76x02: move mac_reset_counter in mt76x02_lib module
63e8152 mt76: mt7615: enable SCS by default
b140512 mt76: mt76x0e: make array mt76x0_chan_map static const, makes object smaller
a20c20b mt76: usb: add lockdep_assert_held in __mt76u_vendor_request
0308d75 mt76: remove empty flag in mt76_txq_schedule_list
0efbc5d mt76: use cancel_delayed_work_sync in mt76_rx_aggr_shutdown
9c5df3c mt76: remove aggr_work field from struct mt76_wcid
8739f87 mt76: mt7615: fix control frame rx in monitor mode
e07407a mt7603: fix build with CONFIG_KERNEL_DYNAMIC_DEBUG=y
c7f8214 mt76: mt7615: add support to read temperature from mcu
6797378 mt76: mt7615: introduce mt7615_txwi_to_txp utility routine
496c78e mt76: mt76x0: remove unneeded return value on set channel
1d2acd5 mt76: mt76x0: remove redundant chandef copy
0167bfa mt76: make mt76_rx_convert static
Signed-off-by: David Bauer <mail@david-bauer.net>
This adds a (currently missing) throughput LED trigger for the rt2x00
driver. Previously, LED triggers had to be assigned to the netdev, which
was limited to a single VAP.
Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Christoph Krapp <achterin@googlemail.com>
(cherry picked from commit 985ec835aea100e9245baaef8ebb15628601fe5e)
Only select ath10k-ct-regular when smallbuffers version was not
selected.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 80f06cb601160534f20e61d476dcedba77d5a47d)
According to many bugreports [0][1][2] the default ath10k-ct kernel
module is unusable on devices with just 64 MiB RAM or with 128 MiB and
dual ath10k cards. The target boards boot but eventually oom-killer
starts to interfere with normal operation, so the current state is
effectively broken.
Since the two patches in question have a performance impact (and
possibly some other unexpected side-effects) a dedicated build variant
is added so that users of the low RAM devices can still benefit from all
the ath10k-ct advantages.
According to testing [3] results, the issue can be experienced even with
"a 256MB device with three radios". Measured performance impact of
implementing small buffers was lowering "the maximum 5 GHz throughput on
an IPQ40xx device without RPS/XPS optimizations from 494/432 Mbit/s for
TCP transfers (download/upload) to 438/343 Mbit/s"
The patches were apparently inspired by QSDK tweaks used by ODMs for the
affected devices.
[0] http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020573.html
[1] https://github.com/openwrt/openwrt/pull/1077
[2] https://bugs.openwrt.org/index.php?do=details&task_id=2664
[3] https://github.com/freifunk-gluon/gluon/pull/1440#issue-195607701
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
[Remove double CONFIG_ATH10K-CT_LEDS entry]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 1ac627024de916eb157659caf49f93fa89d3b19a)
b4e25d5 libblkid-tiny: fix symbol collision with full libblkid
Fixes: FS#2691, FS#2692
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 5f4244150f99d7bf72a96ec4d9c1055386e66b53)
4327ed4 mkdev: Avoid out of bounds read
9b3eb63 libblkid-tiny: use blkid_probe_set_utf8label for label set
c9d0462 libblkid-tiny: adds blkid_probe_set_utf8label support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 541a3210707d1fc4b439ac61dc06816dcec2ab10)
It contains a single change to vlist.h header file: "vlist: add more
macros for loop iteration". This is needed for newer version of fstools
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 51e76247762d265d4a4aac33456876b83b0cca25)
eb30a03 libubox, jshn: add option to write output to a file
Signed-off-by: Roman Yeryomin <roman@advem.lv>
(cherry picked from commit c0e7ec91a0927002942631bbc995b90f5f7dd7ed)
This patch resolves recursive dependency warning on a feed package:
$ make defconfig
Collecting package info: done
tmp/.config-package.in:104721:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:104721:symbol PACKAGE_nfs-kernel-server depends on NFS_KERNEL_SERVER_V4
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
feeds/packages/net/nfs-kernel-server/Config.in:4:symbol NFS_KERNEL_SERVER_V4 depends on PACKAGE_nfs-kernel-server
#
# configuration written to .config
#
19.07 branch uses kernel 4.14 only, so CONFIG_LINUX_4_9 symbol is not
needed anyway.
Ref: https://github.com/openwrt/packages/issues/10490
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Unloading and reloading the modules fails, as platform_device_put() does not
release resources fully.
root@OpenWrt:/# insmod i2c-gpio-custom bus0=0,18,0,5
[ 196.860620] Custom GPIO-based I2C driver version 0.1.1
[ 196.871162] ------------[ cut here ]------------
[ 196.880517] WARNING: CPU: 0 PID: 1365 at fs/sysfs/dir.c:31 0x80112158
[ 196.893431] sysfs: cannot create duplicate filename '/devices/platform/i2c-gpio.0'
...
[ 197.513200] kobject_add_internal failed for i2c-gpio.0 with -EEXIST, don't try to register things with the same name in the same directory.
This patch fixes it by replacing platform_device_put() to
platform_device_unregister().
Fixes: da7740853715 ("i2c-gpio-custom: minor bugfix")
Fixes: 3bc81edc70e8 ("package: fix w1-gpio-custom package (closes#6770)")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(cherry picked from commit a22b7a60d98836343c4f7b9ec0fcae68d9131522)
The USB descriptor parsing in adb fails to detect SuperSpeed devices
because of the SuperSpeed Endpoint Companion Descriptor. This
cherry-picks the upstream fix for the problem.
Unfortunately there never were a release with this fix before the
conversion to C++, so upgrading to a newer version isn't an option.
This makes adb work with SuperSpeed devices like the Sierra Wireless
EM7565. Tested and verified.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
(cherry picked from commit d034a1f4577108a465e8347d11a51dc0e5a29298)
This update doesn't include:
3b1e0a7bdfee brcmfmac: add support for SAE authentication offload
be898fed355e brcmfmac: send port authorized event for FT-802.1X
due to nl80211 dependencies.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit c3aa33bf705027751b344bc668541e5d08ed9495)
The release notes since last time for wave-1:
* November 29, 2019: Fix IBSS merge issue, related to TSF id leakage bug in firmware code.
Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test.
The release notes since last time for wave-2:
* December 6, 2019: Fix 160Mhz problem caused by logic that did not take into account the fact that
160Mhz has only 1/2 of the NSS of lower bandwidths in the rate table.
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit 30109782df3c74becd60dd13216346e1ea2fcc96)
This also fixes mac80211_prepare_vif iw set channel in monitor or
mesh mode.
Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[daniel@makrotopia.org: fixed commit message]
(cherry picked from commit c7fb12beb1d347f1cedc7890dbe2d441f70ccf62)
e4bd927 cast ucert_argv to proper type when passing to execv
Fixes warnings:
warning: passing argument 2 of 'execv' from incompatible pointer type
[-Wincompatible-pointer-types]
254 | execv(usign_argv[0], usign_argv)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 9c272dd3e42a51c1343ed4fad54ac38bb97349dd)
This decreases the size of the usign application by 16% on MIPS BE.
old:
24,597 /usr/bin/usign
new:
20,501 /usr/bin/usign
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 6ffd8a8f92ab5337ab967ab2922d7de7f0480bc9)
This decreases the size of the swconfig application by 25% on MIPS BE.
old:
16,916 /sbin/swconfig
new:
12,565 /sbin/swconfig
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit e926681387891fe9af89d884ebc3dce4c8c7f450)
This decreases the size of the mtd application by 25% on MIPS BE.
old:
20,597 /sbin/mtd
new:
16,421 /sbin/mtd
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 1eb34b7287ed97ad1e2ae60a436babbb5c68076f)
netifd does not handle network.@device[x].name properly if it
contains multiple ifaces separated by spaces. Due to this, board.d
lan_mac setup does not work if multiple ifaces are set to LAN by
ucidef_set_interface_lan.
To fix this, create a device node for each member iface when
running config_generate instead. Those are named based on the
member ifname:
ucidef_set_interface_lan "eth0 eth1.1"
ucidef_set_interface_macaddr "lan" "yy:yy:yy:yy:yy:01"
will return
config device 'lan_eth0_dev'
option name 'eth0'
option macaddr 'yy:yy:yy:yy:yy:01'
config device 'lan_eth1_1_dev'
option name 'eth1.1'
option macaddr 'yy:yy:yy:yy:yy:01'
ref: https://github.com/openwrt/openwrt/pull/2542
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[always use new scheme, extend description, change commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 298814e6be7640d89328de9e7c90d4349e30683f)
Commit b3d8b3a introduced a new test:
[ -n "$noscan" -a "$noscan" -gt 0 ] && hostapd_noscan=1
But if length of "$noscan" is zero (noscan is not set) this doesn't stop
the shell to evaluate the rest of the test.
root@hank2:~# [ -n "$noscan" -a "$noscan" -gt 0 ]
ash: out of range
root@hank2:~#
So when radios are brought up this shows in the log:
Sat Nov 23 10:51:38 2019 daemon.info procd: - init complete -
Sat Nov 23 10:52:24 2019 daemon.notice netifd: radio1 (1243): sh: out of range
Sat Nov 23 10:52:25 2019 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Sat Nov 23 10:52:25 2019 daemon.notice netifd: radio0 (1242): sh: out of range
Sat Nov 23 10:52:26 2019 authpriv.info dropbear[1536]: Not backgrounding
This commit sets noscan to 0 if unset and removes the gratuitous length
check, preventing the warning.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
(cherry picked from commit 28d84331f4bba5923059e701f5d4878b2df3fa79)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hardware
--------
SoC: Qualcomm IPQ4019
RAM: 256M DDR3
FLASH: 128M NAND
WiFi: 2T2R IPQ4019 bgn
2T2R IPQ4019 a/n/ac
ETH: Atheros AR8033 RGMII PHY
BTN: 1x Connect (WPS)
LED: Power (green/red/yellow)
Installation
------------
1. Grab the uboot for the Device from the 'u-boot-fritz1200'
subdirectory. Place it in the same directory as the 'eva_ramboot.py'
script. It is located in the 'scripts/flashing' subdirectory of the
OpenWRT tree.
2. Assign yourself the IP address 192.168.178.10/24. Connect your
Computer to one of the boxes LAN ports.
3. Connect Power to the Box. As soon as the LAN port of your computer
shows link, load the U-Boot to the box using following command.
> ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin
4. The U-Boot will now start. Now assign yourself the IP address
192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
server root directory and rename it to 'FRITZ1200.bin'.
5. The Box will now boot OpenWRT from RAM. This can take up to two
minutes.
6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
scp. SSH into the Box and first write the Bootloader to both previous
kernel partitions.
> mtd write /path/to/uboot-fritz1200.bin uboot0
> mtd write /path/to/uboot-fritz1200.bin uboot1
7. Remove the AVM filesystem partitions to make room for our kernel +
rootfs + overlayfs.
> ubirmvol /dev/ubi0 --name=avm_filesys_0
> ubirmvol /dev/ubi0 --name=avm_filesys_1
8. Flash OpenWRT peristently using sysupgrade.
> sysupgrade -n /path/to/openwrt-sysupgrade.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 7f187229a8e9b7966248b1e024217e07a9fc3e50)
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
8174814 utils: persist effective extra_src and extra_dest options in state file
72a486f zones: fix emitting match rules for zones with only "extra" options
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 482114d3f78df2a19904cc8edf7d9adcfdbb8625)
wireless-regdb fails to build if there is python2 installed from package
feeds, as staging_dir/hostpkg/bin/python is python2 and
staging_dir/hostpkg/bin takes precedence over staging_dir/host/bin
(proper place with python -> python3 symlink) which leads to the build
failure of wireless-regdb, so this patch makes it explicit which python
should be used.
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tested-by: Russell Senior <russell@personaltelco.net>
Tested-by: Lucian Cristian <lucian.cristian@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit b6bae4a2c9f11f7e55319c2b4c709396ce649688)
Refresh patches to tidy up some fuzz warnings
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit 12840674d0550e6f5aa077cd2b578988f0c07074)
As it's an architecture-independent binary file.
Ref: https://github.com/openwrt/openwrt/pull/1521#issuecomment-514687053
Suggested-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 57d1c05ec945b4853708d686c0782c4b1dcff0a9)
Usage of predefined make variables is preferred.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit d3853d17a37a67541736b8b13f412a49ab382b9a)
This backports a patch to build it work with python2 in addition to
python3.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit d3a8a62692b06b3e5fe7077a2ce641fbf09cdc19)
