Borys Zhukov
|
f25cd55bd1
|
ramips: add support for Netgear WAX214v2
Netgear WAX214v2 is an 802.11ax (Wi-Fi 6) wireless access point.
Specifications:
* SoC: MediaTek MT7621AT
* RAM: 512 MiB
* Flash: NAND 128 MiB (ESMT PSU1GA30DT)
* Wi-Fi: 2.4/5 GHz 4T4R (MediaTek MT7915E)
* Ethernet: 1x 10/100/1000 Mbps LAN
* Switch: MediaTek MT7530 (SoC built-in)
* LEDs/Keys
* Power (green, blue, amber)
* LAN (green, amber)
* WLAN 2.4GHz (green, blue)
* WLAN 5GHz (green, blue)
* Reset button
* USB: None
* UART: Marked J1 on board, 115200 8N1
* Power
* 12 VDC, 1.5 A
* IEEE 802.3at (PoE+)
Load addresses (same as Netgear WAX202):
* stock
* 0x80010000: FIT image
* 0x81001000: kernel image -> entry
* OpenWrt
* 0x80010000: FIT image
* 0x82000000: uncompressed kernel+relocate image
* 0x80001000: relocated kernel image -> entry
MAC addresses as verified by OEM firmware:
vendor OpenWrt address
eth0 lan label
ra0 phy0 label + 2
rax0 phy1 label + 3
Installation:
* Flash the factory image by TFTP to the bootloader.
NMRP can be used to TFTP without opening the case.
Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.
References to WAX214v2 GPL source:
https://www.downloads.netgear.com/files/GPL/WAX214v2-V1.0.1.5-gpl-src.tar.gz
* openwrt/target/linux/ramips/dts/mt7621-ax-nand-wax214v2.dts
DTS file for this device.
Signed-off-by: Borys Zhukov <borys@zhukov.org>
Link: https://github.com/openwrt/openwrt/pull/14401
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
2024-07-21 20:05:14 +02:00 |
|