Commit Graph

23389 Commits

Author SHA1 Message Date
Gabor Juhos
4da13625d5 mpc85xx: add user-space support for the TL-WDR4900 v1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35733
2013-02-21 19:20:34 +00:00
Gabor Juhos
bd2c77b264 mpc85xx: update 3.8 config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35732
2013-02-21 18:44:40 +00:00
Gabor Juhos
bcac3c5569 ar71xx: fix MAC address assignment on the DIR-825-Bx boards
Use the same MAC addresses as the original firmware.

Based on a patch from #10421.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Gabor Varga <vargagab@gmail.com>

SVN-Revision: 35730
2013-02-21 17:58:21 +00:00
Gabor Juhos
d785803bfa mpc85xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35729
2013-02-21 17:48:31 +00:00
Gabor Juhos
cf2324fd6b ar71xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35728
2013-02-21 17:47:15 +00:00
Gabor Juhos
9cc3a60b5a atheros: add support for linux kernel v3.8
This builds and boots.

Because of the function pointer indirection (e.g. mtd_info's read
function pointer is assigned to spiflash_read), it is difficult for me
to understand where the calls are coming from (could be anywhere,
conditionally pointing at spiflash versions), so I punted and used the
renamed function pointers (_erase, _read, _write).  If someone knows
better what to do, please fix.

Cleaned up other sundry kernel tracking issues like get_phy_id and
__devinit,etc.

[juhosg: don't switch to that yet]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35727
2013-02-21 17:45:54 +00:00
Gabor Juhos
babd5aa2fc linux/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35726
2013-02-21 16:52:34 +00:00
Jonas Gorski
ff20c0e1fc bcm63xx: Fix sysupgrade for tag-version 7 and 8
Fix sysupgrade for tag-version 7 and 8.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35724
2013-02-21 11:45:41 +00:00
Jonas Gorski
3010a0b616 generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLAN
Setting this bit stops BCM53125 (bgmac actually) from receiving any
packets. This bit is cleared conditionally in b53_switch_reset and it
seems the same is done in bcmrobo.c which never sets that bit again.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35723
2013-02-21 11:45:38 +00:00
Jonas Gorski
23e71c56ba generic: b53: remove empty spaces
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35722
2013-02-21 11:45:36 +00:00
Jonas Gorski
1cd62d06ca ramips: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35721
2013-02-21 11:45:33 +00:00
Jonas Gorski
a0956a88d4 cns21xx: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35720
2013-02-21 11:45:31 +00:00
Jonas Gorski
b91eab631b ar71xx: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35719
2013-02-21 11:45:29 +00:00
Jonas Gorski
2d8c5117c0 scripts/symlink-tree.sh: print warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35718
2013-02-21 11:45:27 +00:00
Jonas Gorski
5449b24099 scripts/ipkg: print warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35717
2013-02-21 11:45:25 +00:00
Jonas Gorski
45846230ab include/toplevel.mk: print warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35716
2013-02-21 11:45:22 +00:00
Jonas Gorski
a48b04e8dc include/package-ipkg.mk: print warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35715
2013-02-21 11:45:20 +00:00
Jonas Gorski
d0891e0ae8 include/package-bin: print warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35714
2013-02-21 11:45:18 +00:00
Jonas Gorski
88ff7e3f23 include/kernel.mk: print warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35713
2013-02-21 11:45:16 +00:00
Jonas Gorski
29a3af1bb8 base-files: make firstboot ask for confirmation
To prevent accidential resets ask for confirmation (and default to n).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35712
2013-02-21 11:45:14 +00:00
Jonas Gorski
219b7c91d6 mac80211: add missing DRIVER_11N_SUPPORT selects
Multiple drivers were missing their DRIVER_11N_SUPPORT despite
supporting 11N capable cards.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35711
2013-02-21 11:45:12 +00:00
Jonas Gorski
5636037cff busybox: remove two obsolete patches
They either work around missing implementations in uClibc 0.9.30 and
earlier and add already present functionality.

Closes #11210, #11211.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35710
2013-02-21 11:45:10 +00:00
Jonas Gorski
55f65c5c1d toolchain: uclibc: fix typo in uclibc common config
Based on a patch from Oliver Metz.

Closes #10735.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35709
2013-02-21 11:45:07 +00:00
Gabor Juhos
fad3fc1ad0 mpc85xx: add kmod-leds-gpio to the default packages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35708
2013-02-21 10:26:03 +00:00
Gabor Juhos
c837cae29c mpc85xx: disable a bunch of unused device nodes on the TL-WDR4900
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35707
2013-02-21 10:26:00 +00:00
Gabor Juhos
316706b09c package/kernel: add package for the Gianfar PTP driver
PTP for gianfar can be built as a module. Create a package for it.

[juhosg: remove the mp85xx specific patch]

Patchwork: http://patchwork.openwrt.org/patch/3344/
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35706
2013-02-20 19:14:20 +00:00
Gabor Juhos
9070d701e7 package/kernel: add package for the Freescale Gianfar driver
[juhosg: move the fsl-pq-mdio driver into a separate package]

Patchwork: http://patchwork.openwrt.org/patch/3345/
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35705
2013-02-20 19:14:15 +00:00
Hauke Mehrtens
9afdb046d3 brcm47xx: do not use vlan0 any more.
The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325.

This makes OpenWrt always use vlan1 and vlan2 instead.

SVN-Revision: 35704
2013-02-20 15:31:43 +00:00
Jo-Philipp Wich
9622f68581 buildroot: allow specifying libc personality for external toolchains
SVN-Revision: 35703
2013-02-20 15:06:10 +00:00
Gabor Juhos
330ae61b1b package/kernel: remove trailing whitespaces from *.mk files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35691
2013-02-20 09:41:48 +00:00
Gabor Juhos
4305c6cda1 mpc85xx: add kernel support for the TL-WDR4900 v1 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35690
2013-02-20 08:27:27 +00:00
Gabor Juhos
33ba984628 mpc85xx: use a foreach loop to copy boot images
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35689
2013-02-20 08:27:26 +00:00
Gabor Juhos
2d9e89b24c fix ARCH_SUFFIX for mips64{,el}r2
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35688
2013-02-20 06:49:02 +00:00
Gabor Juhos
4341b11f3e ar71xx: remove __dev{init,exit} annotations from kernel files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35687
2013-02-19 20:52:06 +00:00
Gabor Juhos
7d0d29ab6e linux/3.8: add missing Kconfig symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35686
2013-02-19 20:52:03 +00:00
Florian Fainelli
280fa5a1a2 dante: fix broken configure script not using CFLAGS for conftest
Spotted by doing an ARM hard float build.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35685
2013-02-19 17:22:55 +00:00
Florian Fainelli
16f7554f95 openssl: remove now obsolete cris/etrax patch
The etrax target has been removed in r34768.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35684
2013-02-19 17:22:51 +00:00
Florian Fainelli
23dc201979 libiconv: compile iconv stub with TARGET_CFLAGS
Fixes spurious build issues when changing target CFLAGS for specific ABI
options (such as ARM's floating point ABI).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35683
2013-02-19 17:22:46 +00:00
Gabor Juhos
76b797c759 mpc85xx: add default profile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35677
2013-02-19 14:53:17 +00:00
Gabor Juhos
debb9a4a97 mpc85xx: add gpio-keys to OF match table
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35676
2013-02-19 14:53:16 +00:00
Gabor Juhos
69cc70a43c mpc85xx: enable squashfs feature
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35675
2013-02-19 14:53:15 +00:00
Gabor Juhos
ae9100e969 mpc85xx: add swconfig to default packages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35674
2013-02-19 14:53:12 +00:00
Steven Barth
3081c672fc 6relayd: Fix possible memory corruption issue
SVN-Revision: 35673
2013-02-19 12:04:41 +00:00
Gabor Juhos
ed0f43f1e2 kernel: update linux 3.8-rcX to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35672
2013-02-19 09:17:38 +00:00
Hauke Mehrtens
48bc2fbff3 mac80211: b43: Increase number of RX DMA slots
Bastian Bittorf reported that some of the silent freezes on a Linksys WRT54G
were due to overflow of the RX DMA ring buffer, which was created with 64
slots. That finding reminded me that I was seeing similar crashed on a netbook,
which also has a relatively slow processor. After increasing the number of
slots to 128, runs on the netbook that previously failed now worked; however,
I found that 109 slots had been used in one test. For that reason, the number
of slots is being increased to 256.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

SVN-Revision: 35671
2013-02-18 20:44:26 +00:00
Steven Barth
f5b63ffd33 6relayd: Workaround potential signal handling issue
SVN-Revision: 35665
2013-02-18 12:50:36 +00:00
Florian Fainelli
1dd9e661be x86/rdc: migrate to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35664
2013-02-18 10:38:05 +00:00
Florian Fainelli
677714309b rb532: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35663
2013-02-18 10:38:02 +00:00
Florian Fainelli
2bfa1ed82c cobalt: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35662
2013-02-18 10:37:58 +00:00
Florian Fainelli
d7092aceb8 brcm63xx: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35661
2013-02-18 10:37:55 +00:00