Commit Graph

41383 Commits

Author SHA1 Message Date
Felix Fietkau
adc3f31b2c firewall: update to the latest version, adds hw flow offload support
35b3e74 defaults: add support for setting --hw on the xt_FLOWOFFLOAD rule

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-04-05 18:12:30 +02:00
Felix Fietkau
d073f650cd kernel: add support for enabling hardware flow offload via iptables
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-04-05 18:12:30 +02:00
Felix Fietkau
11a3d27043 kernel: add hardware offload patch for flow tables support
Supports offloading through VLAN, bridge and PPPoE devices as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-04-05 18:12:30 +02:00
David Bauer
f8dbafb234
ar71xx: add model detection for UBNT AC-Mesh
This commit adds correct model detection for UniFi
AC-Mesh. Previously said device was incorrectly detected
as UniFi AC-Lite.

The Information about the device is stored at 0xC in the EEPROM
partition. It corresponds to the sysid in /etc/board.info of the
Ubiquiti stock firmware.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-04-05 15:28:56 +02:00
Nicolò Veronese
d265a8f2ca
ar71xx: Add support for D-Link DAP-1330 a1
D-Link DAP-1330 rev. A1 is a wall-plug N300 Wi-Fi range extender,
based on Qualcomm/Atheros QCA9533 v2.

Short specification:

- 650/393/216 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 64 MB of RAM (DDR1)
- 8 MB of FLASH
- 2T2R 2.4 GHz
- 2x external antennas
- 6x LED (2 are bi-color), 2x button
- 4 pin on pcb (looking from eth port and from left to right tx,rx,gnd,vcc)

Flash instruction: use "factory" image directly in vendor GUI.

This device has a recovery system that assign the ip addr of env
variable "serverip" via dhcp to a pc, and the "ipaddr" value to itself.
The recovery it's triggered by a not bootable firmware,
or pressing the reset button during the bootloader startup (first 30 seconds).
The recovery uses a http page to restore the firmware, and it's checking
the firmware image header, so use the "factory" image to
restore or the original firmware.

You can access vendor firmware over serial using:
- login: root
- password: linuxrocks

Image was tested only in EU version of the device, but should work
also with the same device version sold in other countries.

Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
2018-04-05 15:28:56 +02:00
Nicolò Veronese
0d8a0a6a17
firmware-utils: image generator for D-Link DAP-1330
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
2018-04-05 15:28:56 +02:00
Jo-Philipp Wich
e9eb9393f4 include: extend SetupHostCommand macro to accept more arguments
Commit d6d3db0543 added more gcc version probes, exceeding the argument
limit of the SetupHostCommand macro, leading to failing GCC/LLVM tests
on OS X.

Extend the handled number of arguments to restore proper functionality.

Fixes FS#1470
Fixes d6d3db0543 ("build: Improve GCC version detection")

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-04-05 13:58:15 +02:00
Alexander Couzens
2b84f95f38
base-files: change /var link from /tmp to tmp
Some packages are already using $(1)/var on package install.
On multiuser systems this breaks the build when multiple
users build OpenWrt.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2018-04-05 11:48:34 +02:00
Jo-Philipp Wich
1ef0be3e5b Revert "ncurses: Remove obsolete compile fixes"
This reverts commit 4fb684a755.

The compile fixes are still required for host systems using GCC 5.x,
such as Ubuntu 16.04 LTS.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-04-04 17:08:10 +02:00
Reto Schneider
58fe527931 ar71xx: Fix typo in wan LED color of gl-mifi
It was wrong from the beginning and the trigger for the wan led was
never set due to the typo.

Signed-off-by: Reto Schneider <code@reto-schneider.ch>
[add commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-04-04 09:27:18 +02:00
Mathias Kresin
3a4bf25fd6 base-files: get_dt_led: don't warn about missing led
It's intentional that some boards within a target don't have all LEDs
which are tried to be setup in a common script. Don't show a warning in
such cases.

Fixes: 4f4fc993db ("base-files: add more name source to get_dt_led helper function")
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-04-04 09:12:39 +02:00
Mathias Kresin
0c26264dee lantiq: kernel 4.14: fix vr9 reboot mask
We need to reset the GPHYs on reboot as well. Otherwise the bootloader
might have issues to reset/find the GPHYs.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-04-04 09:09:51 +02:00
Pawel Dembicki
8db84cc0ee ramips: add support for DLINK DWR-921-C3
The DWR-921-C3 Wireless Routers with LTE embedded modem is based on the
MT7620N SoC.

Specification:

  * MediaTek MT7620N (580 Mhz)
  * 64 MB of RAM
  * 16 MB of FLASH
  * 802.11bgn radio
  * 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
  * 2x external, detachable (LTE) antennas
  * UART header on PCB (57600 8n1)
  * 6x LED (GPIO-controlled)
  * 1x bi-color Signal Strength LED (GPIO-controlled)
  * 2x button
  * JBOOT bootloader

Installation:
Apply factory image via d-link http web-gui.

How to revert to OEM firmware:
1.) Push the reset button and turn on the power. Wait until LED start
    blinking (~10sec.)
2.) Upload original factory image via JBOOT http (IP: 192.168.123.254)
3.) If http doesn't work, it can be done with curl command:
    curl -F FN=@XXXXX.bin http://192.168.123.254/upg
    where XXXXX.bin is name of firmware file.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-04-04 08:42:46 +02:00
Giuseppe Lippolis
6525bffc0a ramips: add support for DLINK DWR-921-C1
The DWR-921-C1 Wireless Routers with LTE embedded modem is based on the
MT7620N SoC.

Specification:

  * MediaTek MT7620N (580 Mhz)
  * 64 MB of RAM
  * 16 MB of FLASH
  * 802.11bgn radio
  * 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
  * 2x external, detachable (LTE) antennas
  * UART header on PCB (57600 8n1)
  * 6x LED (GPIO-controlled)
  * 1x bi-color Signal Strength LED (GPIO-controlled)
  * 2x button
  * JBOOT bootloader

The status led has been assigned to the dwr-921-c1:green:sigstrength (lte
signal strength) led. At the end of the boot it is switched off and is
available for lte operation. Work correctly also during sysupgrade
operation.

Installation:
Apply factory image via d-link http web-gui.

How to revert to OEM firmware:
1.) Push the reset button and turn on the power. Wait until LED start
    blinking (~10sec.)
2.) Upload original factory image via JBOOT http (IP: 192.168.123.254)
3.) If http doesn't work, it can be done with curl command:
    curl -F FN=@XXXXX.bin http://192.168.123.254/upg
    where XXXXX.bin is name of firmware file.

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2018-04-04 08:42:35 +02:00
Pawel Dembicki
e9d5f8ebb2 ramips: add BroadMobi BM806U lte-modem support
Backport patch which adds suport for the BroadMobi BM806U 3G/4G modem,
which is used in D-Link DWR-921 C3.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-04-04 08:29:17 +02:00
Giuseppe Lippolis
be554242e5 ramips: add wistron neweb d18q1 lte-modem support
Backport patch which adds suport for the Wistron NeWeb d18q1 LTE modem
which is used in D-Link DWR-921 C1.

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2018-04-04 08:29:17 +02:00
André Draszik
cd75d6f7b3 ramips: mt7620: eMMC: fix compiler warnings in non-debug mode
drivers/mmc/host/mtk-mmc/dbg.c:51:13: warning: 'cmd_buf' defined but not used [-Wunused-variable]
 static char cmd_buf[256];
             ^~~~~~~

In addition, msdc_reg[] is completely unused, even in debug
mode.

Signed-off-by: André Draszik <git@andred.net>
2018-04-04 08:29:17 +02:00
André Draszik
584b2a26f5 ramips: mt7620: eMMC: remove unused variable
msdc_6575_host[] is unused, just remove it. Also, it
was the source of memory corruption up until the
previous fix to this driver.

Signed-off-by: André Draszik <git@andred.net>
2018-04-04 08:29:17 +02:00
André Draszik
ace1686200 ramips: mt7620: eMMC: stop invalid memory access if only one device is defined
pdev->id is -1 when only one device exists, and is used:
* as an index into drv_mode[] to determine whether to use
  PIO or DMA mode (via host->id)
* as an index into msdc_6575_host[], to store the
  mmc_priv() data.

Obviously, -1 is not a valid index in either case, causing
us to read invalid memory, and memory corruption,
respectively.

The invalid memory read is causing non-deterministic
behaviour, in particular in the v4.4 kernel it still
picked DMA mode, but in the v4.9 it now always picks
PIO mode.
Also, PIO mode doesn't work, causing the following:

/ # echo 3 > /proc/sys/vm/drop_caches
[ 3845.249237] sh (128): drop_caches: 3

/ # /root/usr/lib/libc.so
[ 3846.096070] do_page_fault(): sending SIGSEGV to libc.so for invalid read access from 7f9cb5a0
[ 3846.104758] epc = 779b0ea4 in libc.so[7792f000+c3000]
[ 3846.109907] ra  = 779a8004 in libc.so[7792f000+c3000]
Segmentation fault

/ # /root/usr/lib/libc.so
musl libc (mipsel-sf)
Version 1.1.16-git-40-g54807d47
Dynamic Program Loader
Usage: /root/usr/lib/libc.so [options] [--] pathname [args]

(i.e. initial page-in of any binary causes a segfault,
subsequent access works.)

While this change doesn't fix PIO mode, it at least makes
us deterministically use DMA (which works), and it also
stops us from corrupting memory.

Signed-off-by: André Draszik <git@andred.net>
2018-04-04 08:29:17 +02:00
André Draszik
dcbf6284e5 ramips: mt7620: eMMC: fix MODULE_DEVICE_TABLE
This was referencing an undefined symbol, probably
due to copy/paste error.

Signed-off-by: André Draszik <git@andred.net>
2018-04-04 08:29:16 +02:00
André Draszik
7d44b36c98 ramips: mt7620: eMMC: fix compiler warning (misleading indentation)
drivers/mmc/host/mtk-mmc/sd.c:2782:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
     if ((hw->flags & MSDC_SDIO_IRQ) || (hw->flags & MSDC_EXT_SDIO_IRQ))
     ^~
drivers/mmc/host/mtk-mmc/sd.c:2785:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
  cd_active_low = !of_property_read_bool(pdev->dev.of_node, "mediatek,cd-high");
  ^~~~~~~~~~~~~

Signed-off-by: André Draszik <git@andred.net>
2018-04-04 08:29:16 +02:00
André Draszik
bbbd71e3ea ramips: mt7620: eMMC: clear owner field
a) This is not needed in recent kernels anymore (> 3.x ??)
b) this allows driver unloading now

Signed-off-by: André Draszik <git@andred.net>
2018-04-04 08:29:16 +02:00
Sebastian Fleer
7e42cbaf2a leds-apu2: add newer board names
In recent firmware releases the board names changed from "apuX" to "PC Engines apuX"

Signed-off-by: Sebastian Fleer <pubalias@posteo.net>
2018-04-03 23:26:45 +02:00
Daniel Engberg
fe8350e92e package/utils/f2fs-tools: Update to 1.10.0
Update f2fs-tools to 1.10.0

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-04-03 23:26:45 +02:00
Rosen Penev
4fb684a755 ncurses: Remove obsolete compile fixes
It seems both issues (GCC5 and Musl) were fixed at some point. Thus, they can be dropped.

Did not bump version as there is no change in functionality or size.

Compile-tested on ar71xx and mvebu, both with musl.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-04-03 23:26:45 +02:00
Adrià Llaudet
482bc646a5 nand-utils: add flash_erase utility
flash_erase utility allows to erase MTD partitions on NAND flash.
Useful when you want to clean or write an MTD partition from scratch.

e.g., before using kobs-ng to flashing SPL images it's recommended
to erase the MTD partition to ensure it's empty.

Signed-off-by: Adrià Llaudet <adria.llaudet@gmail.com>
2018-04-03 23:26:45 +02:00
Hannu Nyman
d674422a81 busybox: update to 1.28.2
Update busybox to 1.28.2, refresh patches and default config.

* modify 230-add_nslookup_lede.patch as opt_complementary was removed
    Also move nslookup_longopts variable declaration to be inside
    the same conditional as the function itself.
* modify 250-date-k-flag.patch to match upstream (opt_complementary)
* remove 600-cve-2017-16544.patch that is upstreamed

Notes about config changes:
* Some applet-specific LONG_OPTIONS config options were removed
* Config help text indentation changed, caused lots of
  text formatting changes for convert_menuconfig.pl
* convert_defaults.pl moved lots of defaults around, summary of
  actual changes below

New applets/features:
---------------------
ARCH
HEXEDIT
MINIPS
NETCAT
NUKE
RESUME
RUN_INIT
SETFATTR

New options:
------------
FEATURE_CATN
FEATURE_CROND_SPECIAL_TIMES
FEATURE_LIBBUSYBOX_STATIC
FEATURE_SETPRIV_CAPABILITIES
FEATURE_SETPRIV_CAPABILITY_NAMES
FEATURE_SETPRIV_DUMP
FEATURE_SH_READ_FRAC
FEATURE_SWAPONOFF_LABEL
FEATURE_VOLUMEID_MINIX
FEATURE_XARGS_SUPPORT_ARGS_FILE
FEATURE_XARGS_SUPPORT_PARALLEL
HUSH_GETOPTS
HUSH_READONLY
HUSH_TIMES

Removed:
--------
FEATURE_HAVE_RPC
MSH

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2018-04-03 23:26:45 +02:00
Hauke Mehrtens
a74fd570a2 kernel: update kernel 4.14 to 4.14.32
The following patches are now included upstream:
* 0052-MIPS-lantiq-fix-usb-clocks.patch
* 0053-MIPS-lantiq-enable-AHB-Bus-for-USB.patch
* 0060-lantiq-ase-enable-MFD-SYSCON.patch

Closes: FS#1466

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-04-03 23:26:45 +02:00
Hauke Mehrtens
9aaa23ec8b samba36: fix some security problems
This Adds fixes for the following security problems based on debians patches:
CVE-2016-2125: Unconditional privilege delegation to Kerberos servers in trusted realms
CVE-2017-12163: Server memory information leak over SMB1
CVE-2017-12150: SMB1/2/3 connections may not require signing where they should
CVE-2018-1050: Denial of Service Attack on external print server.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-04-03 23:26:45 +02:00
Hauke Mehrtens
d6d3db0543 build: Improve GCC version detection
This now makes sure that the beginning of the version number gets checked
and "4.4.5" will not match was a supported version.
GCC 8 and GCC 9 are now marked as supported, but we probably have to fix
some problems for them.

Closes: FS#1433
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-04-03 23:26:45 +02:00
Hauke Mehrtens
ece815508a kernel: Add support for XM25QH64A and XM25QH128A SPI NOR flash
These devices are produced by Wuhan Xinxin Semiconductor Manufacturing
Corp. (XMC) and found on some routers from Chinese manufactures.

The data sheets can be found here:
http://www.xmcwh.com/Uploads/2018-03-01/5a9799e4cb355.pdf
http://www.xmcwh.com/Uploads/2018-02-05/5a77e6dbe968b.pdf

Closes: FS#1460
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-04-03 23:26:45 +02:00
Hauke Mehrtens
56d0dd56e9 mtd-utils: Mark some lzma functions as static
These functions are not declared in any header file and only used in
same compile unit, mark them as static to remove one gcc warning and
make it easier for the compiler to optimize them out.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-04-03 23:26:45 +02:00
Paul Wassi
de79f4ab88 brcm47xx: add kernel 4.14 support
Add patches for 4.14, drop patch 030 since it's already included
upstream.

Tested on:
1) WRT54GL (with RAM upgraded to 32 MiB)
2) WL500gPv2 (with RAM upgraded to 64 MiB)
3) BCM47186B0 SoC board
4) BCM4706 SoC board

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-04-03 22:57:10 +02:00
Hans Dedecker
986f80595b netifd: update to latest git HEAD
3dc8c91 interface-ip: fix memory leak in interface_ip_add_target_route()

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-04-03 21:28:53 +02:00
Rafał Miłecki
16efb0c1c6 brcm47xx: add Luxul XAP-1500 and XWR-1750 WiFi LEDs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-04-03 15:32:42 +02:00
Hans Dedecker
ac593d895a odhcp6c: update to latest git HEAD
5cbd305 odhcp6c: improve code readibility
eb83b7e treewide: improve error handling
b7b11cb dhcpv6: initialize ifreq struct
f0469e2 ra: handle socket fail creation
d573461 odhcp6c: fix file pointer leakage

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-03-31 19:31:42 +02:00
Hauke Mehrtens
aed03d5d0f kernel: update kernel 4.9 to version 4.9.91
* Refreshed patches.
 * Deleted 210-Revert-led-core-Fix-brightness-setting-when-setting-.patch (was accepted upstream)
 * Deleted 812-pci-dwc-fix-enumeration.patch (was accepted upstream)

Compile and run tested on lantiq

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-31 16:31:26 +02:00
Paul Wassi
ef6939b0af package/libs/mbedtls: add package with some mbedtls binaries.
Add some basic binaries required for private key and CSR generation.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-03-31 16:31:26 +02:00
Hauke Mehrtens
2e75914bee mbedtls: update to version 2.8.0
This fixes some minor security problems.

Old size:
162262 bin/packages/mips_24kc/base/libmbedtls_2.7.0-1_mips_24kc.ipk

New size:
163162 bin/packages/mips_24kc/base/libmbedtls_2.8.0-1_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-31 16:30:30 +02:00
Jan Pavlinec
8c2b8d862b xfsprogs: add xfs-admin util
Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
2018-03-31 16:30:30 +02:00
Paul Wassi
8262179f4a tools/e2fsprogs: update to 1.44.1
Update e2fsprogs to upstream 1.44.1 (feature and bugfix release)

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-03-31 16:30:30 +02:00
Paul Wassi
198172c048 package/utils/e2fsprogs: update to 1.44.1
Update e2fsprogs to upstream 1.44.1 (feature and bugfix release)

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-03-31 16:30:27 +02:00
Paul Wassi
960b90f435 packages/util/util-linux: Update to 2.32
- Update to upstream 2.32
- License file 'getopt/COPYING' not present (any more)
- Disable 'chown root:root'-commands during 'make install'
- Add new dependency to wipefs
- Refresh patch 003

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-03-31 16:30:17 +02:00
Rosen Penev
af35ce1065 ncurses: Update to 6.1.
Compile tested on ar71xx.

Old size:
  6527 bin/packages/mips_24kc/base/terminfo_6.0-1_mips_24kc.ipk
141465 bin/packages/mips_24kc/base/libncurses_6.0-1_mips_24kc.ipk

New size:
  6873 bin/packages/mips_24kc/base/terminfo_6.1-1_mips_24kc.ipk
146950 bin/packages/mips_24kc/base/libncurses_6.1-1_mips_24kc.ipk

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-03-31 16:28:36 +02:00
Rosen Penev
2a82db7ed5 libtool: Update to 2.4.6
Compile tested on mvebu.

old size:
12947 bin/packages/mips_24kc/base/libltdl_2.4-2_mips_24kc.ipk

new size:
13002 bin/packages/mips_24kc/base/libltdl_2.4.6-1_mips_24kc.ipk

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-03-31 16:27:24 +02:00
Matti Laakso
76f267ef6c pistachio: remove kernel 4.9 support
Signed-off-by: Matti Laakso <matti.laakso@outlook.com>
2018-03-31 16:13:19 +02:00
Matti Laakso
0394edbba0 pistachio: Switch to kernel 4.14
Signed-off-by: Matti Laakso <matti.laakso@outlook.com>
2018-03-31 16:13:19 +02:00
Matti Laakso
cae808946a pistachio: add kernel 4.14 support
Add patches and config for 4.14, refreshed from 4.9.

Signed-off-by: Matti Laakso <matti.laakso@outlook.com>
2018-03-31 16:13:19 +02:00
Damir Samardzic
2534141322 mvebu: add support for MACCHIATObin (cortex-a72)
Add initial support for Marvell MACCHIATObin, cortex-a72 based Marvell
ARMADA 8040 Community board. Comes in two forms: Single Shot and Double
Shot.

Specifications:
- Quad core Cortex-A72 (up to 2GHz)
- DDR4 DIMM slot with optional ECC and single/dual chip select support
- Dual 10GbE (1/2.5/10GbE) via copper or SFP
  2.5GbE (1/2.5GbE) via SFP
  1GbE via copper
- SPI Flash
- 3 X SATA 3.0 connectors
- MicroSD connector
- eMMC
- PCI x4 3.0 slot
- USB 2.0 Headers (Internal)
- USB 3.0 connector
- Console port (UART) over microUSB connector
- 20-pin Connector for CPU JTAG debugger
- 2 X UART Headers
- 12V input via DC Jack
- ATX type power connector
- Form Factor: Mini-ITX (170 mm x 170 mm)

More details at http://macchiatobin.net

Booting from micro SD card:
 1. reset U-Boot environment:
      env default -a
      saveenv

 2. prepare U-Boot with boot script:
      setenv bootcmd "load mmc 1:1 0x4d00000 boot.scr; source 0x4d00000"
      saveenv

   or manually:
      setenv fdt_name armada-8040-mcbin.dtb
      setenv image_name Image
      setenv bootcmd 'mmc dev 1; ext4load mmc 1:1 $kernel_addr $image_name;ext4load mmc 1:1 $fdt_addr $fdt_name;setenv   bootargs $console root=/dev/mmcblk1p2 rw rootwait; booti $kernel_addr - $fdt_addr'
      saveenv

Signed-off-by: Damir Samardzic <damir.samardzic@sartura.hr>
2018-03-31 16:13:19 +02:00
Josua Mayer
dff904a955 u-boot-mvebu: update to 2018.03
This release brings various improvements to clearfog support, such as distro-boot.
Obsoletes:
0002-clearfog-reset-usom-onboard-1512-phy.patch
0003-clearfog-enable-distro-boot-code.patch

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2018-03-31 16:12:40 +02:00